Francisco Molina
9ab22b6926
cpu/samd21: add GEN3_ULP32K selector
2020-02-07 15:53:32 +01:00
Benjamin Valentin
38b6ee56f3
cpu/sam0: use defines for GCLK IDs
...
Give the clocks explicit names to better identify their meaning.
2020-02-04 21:16:54 +01:00
Benjamin Valentin
df33ffd0d3
cpu/samd21: only configure one 32kHz GCLK
...
Use the same 32 kHz GCLK to feed the PLL and the RTT, etc.
2020-02-04 21:16:54 +01:00
Benjamin Valentin
1496149bba
cpu/sam0: don't hard-code peripheral clocks
...
Instead of hard-coding the peripheral clocks to CLOCK_CORECLOCK
introduce helper functions to return the frequency of the individual
GCLKs and use those for baud-rate calculations.
This requires the GCLK to be part of the peripheral's config struct.
While this is already the case for most peripherals, this also adds
it for those where it wasn't used before.
As it defaults to 0 (CLOCK_CORECLOCK) no change is to be expected.
2020-02-04 21:06:21 +01:00
Francois Berder
4a31f94cfc
many typo fixes
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2019-11-23 22:39:07 +01:00
Benjamin Valentin
d92c079a90
cpu/samd21: configure GCLK4 with 1024 Hz
...
Both WDT and RTC expect a 1 kHz clock.
Source it from the same generator as the 32 kHz GCLK2.
2019-11-12 11:29:17 +01:00
Marian Buschsieweke
df27dbef7a
cpu: Moved stdio_init() into cpu_init()
...
- Removed stdio_init() from newlib's _init(), as this is too late in the boot
process to allow DEBUG()ing during periph_init()
- Added stdio_init() to the various cpu_init() routines of the ARM CPUs just
before periph_init()
2019-09-06 16:54:23 +02:00
Benjamin Valentin
d6b8df1ff7
cpu/samd21: allow to use XOSC32K for GCLK2
...
GCLK2 is needed by RTC/RTT, so make it possible to configure it with
XOSC32K as source.
2019-06-18 13:20:04 +02:00
Dan Evans
0f011d53de
samd21/cpu DFLL lock loop error
2018-01-26 09:59:59 -07:00
Dan Evans
354803110d
samd21:DFLL bug
2017-07-13 13:09:42 -06:00
Dan Evans
08224bd85a
samd21/clock: add xosc32/DFLL option
2017-06-26 10:42:23 -06:00
Dan Evans
7a8551574b
samd21/cpu:waitstates for low voltage
2017-05-12 14:13:09 -07:00
dylad
2b1a1e70c3
cpu/samd21: fix NVM wait states
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2017-04-12 20:23:51 +02:00
Hauke Petersen
4bfce892d3
drivers/periph&cpu: add and use common periph_init()
2017-01-25 16:46:46 +01:00
Hauke Petersen
ea07a6817c
cpu/sam0+boards: adapted to new SPI API
...
- adapted the SPI driver
- merged SPI driver for samr21 and saml21
- adapted all boards using the CPU
2017-01-25 16:46:45 +01:00
f42e5381ee
cpu: samd21: add periph/pm support
2017-01-12 16:26:01 +01:00
Kees Bakker
88e84f68ff
cpu/sam21_common: update ASF CMSIS (samr21) include files using ASF 3.21
...
Notice that RIOT was using FDPLL96M, which is indeed the name in the
datasheet. But Atmel is using GCLK_GENCTRL_SRC_FDPLL.
2016-09-21 19:43:30 +02:00
Joakim Nohlgård
2ea2cdc9e1
cpu/samd21: Use {} notation for empty while loops
2016-03-03 16:31:28 +01:00
daniel-k
0b6da4609e
samd21: tidy up peripheral clocks and fix potential bugs in pwm and i2c clocks
2015-09-29 18:49:46 +02:00
1172597594
cpu: samd21: fix synchronization loop in clk_init
2015-06-15 21:33:13 +02:00
Hauke Petersen
164721657d
cpu/samd21: added cpu clock configuration
...
- choosable between PLL and internal 8MHz osciallator
- configurable to a wide range of frequencies
2015-06-04 11:58:26 +02:00
Hauke Petersen
dfb717c308
cpu/samd21: adapted to centralized cpu conf
2015-05-29 16:44:52 +02:00
Joakim Gebart
13832d8e62
everything: Remove filename from @file Doxygen command
2015-05-22 07:34:41 +02:00
Thomas Eichinger
bf256f63a3
samr21-xpro: initial import for the samr21-xpro board
2014-09-25 14:37:47 +02:00
