Thomas Stilwell
325ab426d4
sys/shell/commands: pm: add set mode block mode unblock mode
2020-04-28 16:56:34 +02:00
Thomas Stilwell
7c82ac6838
sys/shell/commands: add pm show command to view current blockers
2020-04-28 16:51:23 +02:00
0228553384
sys/shell: rpl: make use of xtimer_left_usec()
2020-04-21 11:26:56 +02:00
Leandro Lanzieri
4052c01e85
net/nanocoap: Move NANOCOAP_URI_MAX to 'CONFIG_' namespace
2020-04-07 17:00:53 +02:00
Peter Kietzmann
767cfc21a9
Merge pull request #13341 from Einhornhool/cryptoauth-shellhandler
...
sys/shell: add shell handler for CryptoAuth devices
2020-03-31 22:19:21 +02:00
Lena Boeckmann
5bc0b15114
sys/shell: add cryptoauthlib shell handler
2020-03-31 21:31:24 +02:00
Leandro Lanzieri
f2ed8b06c0
gnrc/nib: Move GNRC_IPV6_NIB_L2ADDR_MAX_LEN to 'CONFIG_' namespace
2020-03-31 18:07:12 +02:00
Leandro Lanzieri
53a522d642
gnrc/nib: Move GNRC_IPV6_NIB_CONF_MULTIHOP_P6C to 'CONFIG_' namespace
...
Also evaluate using IS_ACTIVE macro.
2020-03-31 18:07:10 +02:00
Leandro Lanzieri
40c78f1c75
gnrc/nib: Move GNRC_IPV6_NIB_CONF_6LBR to 'CONFIG_' namespace
...
Also evaluate it using IS_ACTIVE macro.
2020-03-31 18:07:03 +02:00
Martine Lenders
889e8b7cf8
Merge pull request #13752 from gschorcht/sys/shell/fix_gnrc_netif
...
sys/shell: fix ifconfig command for NETOPT_LINK
2020-03-30 09:44:13 +02:00
Gunar Schorcht
8a1cfd99da
sys/shell: fix ifconfig command for NETOPT_LINK
2020-03-30 09:01:21 +02:00
Benjamin Valentin
e1ce24abec
shell/gnrc_icmpv6_echo: replace incorrect use of gnrc_netif_highlander()
...
We want to check if there *is* only one interface, not if there *can*
be no more than one interface here.
2020-03-27 15:07:38 +01:00
Jose Alamos
e451570219
gnrc_netif: remove GNRC_NETIF_NUMOF macro
2020-03-26 11:12:23 +01:00
7d0c475113
Merge pull request #13486 from bergzand/pr/suit/ietf_v3
...
SUIT: Update to draft-ietf-v3
2020-03-20 14:44:29 +01:00
benpicco
b0fab9c53a
Merge pull request #13638 from gschorcht/sys/shell/rtt_command
...
sys/shell: add rtt command
2020-03-19 21:21:12 +01:00
Gunar Schorcht
3d20b0b6c5
sys/shell: add rtt command
2020-03-19 17:17:26 +01:00
14bdf8f46b
sys/suit: Add SUIT draft ietf-v3 firmware upgrade module
...
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
2020-03-18 14:13:12 +01:00
6538687a4c
Merge pull request #13613 from fjmolinas/pr_light_shell_interactive_sync
...
tests: add interactive_sync adapted to shell
2020-03-17 18:16:51 +01:00
Francisco Molina
d57c39f09f
sys/shell: remove sc_interactive_sync
2020-03-17 17:20:58 +01:00
Jose Alamos
6ace7b5472
gnrc_netif: use gnrc_netif_single where possible
2020-03-17 10:54:30 +01:00
Martine Lenders
086d0ac83e
Merge pull request #13152 from miri64/shell_commands/enh/version
...
shell_commands: provide command to print version
2020-03-11 18:36:43 +01:00
Jose Alamos
6143cd800b
gnrc_netif: use gnrc_netif_send where possible
2020-03-06 15:22:58 +01:00
Benjamin Valentin
fa4447241f
sock_dns: make sock_dns_query() return the length of the address
...
The implementation already did that, now also reflect this in the
documentation.
2020-02-24 14:29:17 +01:00
Benjamin Valentin
367f19d390
shell/gnrc_icmpv6_echo: don't do DNS lookup for plain IP
...
When using ping6 with an IP address, don't do a DNS lookup.
Hostnames can't contain ':', so use that to tell them apart
from plain IP addressees.
2020-02-24 14:21:54 +01:00
Benjamin Valentin
a65daf7a31
shell/gnrc_icmpv6_echo: set success state if DNS query succeeded
...
We need to set `res` to 0 to signal success, otherwise we end up
in the print usage case.
2020-02-24 14:21:54 +01:00
Benjamin Valentin
f5a5c5dd2c
shell/gnrc_icmpv6_echo: fix build with USEMODULE += sock_dns
...
To be able to call sock_dns_query() in _configure(), we also
need to include the header file.
2020-02-21 23:56:33 +01:00
Benjamin Valentin
d572db83e1
shell/gnrc_icmpv6_echo: print interface id in reply
...
If there is more than one interface, print the id of the receiving
interface for convenience.
```
ping6 ff02::1
2020-02-20 18:19:38,644 # 12 bytes from fe80::d0ae:c1b:2054:58e%7: icmp_seq=0 ttl=64 rssi=-45 dBm time=4.801 ms
2020-02-20 18:19:38,652 # 12 bytes from fe80::d0ae:c1b:2054:58c%8: icmp_seq=0 ttl=64 rssi=-63 dBm time=13.422 ms (DUP!)
2020-02-20 18:19:38,661 # 12 bytes from fe80::c78:16d9:8aca:ba9a%8: icmp_seq=0 ttl=64 rssi=-44 dBm time=21.819 ms (DUP!)
2020-02-20 18:19:39,648 # 12 bytes from fe80::d0ae:c1b:2054:58e%7: icmp_seq=1 ttl=64 rssi=-44 dBm time=4.797 ms
2020-02-20 18:19:39,657 # 12 bytes from fe80::d0ae:c1b:2054:58c%8: icmp_seq=1 ttl=64 rssi=-61 dBm time=12.917 ms (DUP!)
2020-02-20 18:19:39,666 # 12 bytes from fe80::c78:16d9:8aca:ba9a%8: icmp_seq=1 ttl=64 rssi=-43 dBm time=21.679 ms (DUP!)
2020-02-20 18:19:40,657 # 12 bytes from fe80::d0ae:c1b:2054:58e%7: icmp_seq=2 ttl=64 rssi=-41 dBm time=4.795 ms
```
2020-02-21 13:59:52 +01:00
Martine Lenders
ebb20f2d44
Merge pull request #13305 from miri64/gnrc_ipv6_ext_frag_stats/feat/initial
...
gnrc_ipv6_ext_frag: initial import of statistics module
2020-02-10 20:23:13 +01:00
Martine S. Lenders
cf69e61289
gnrc_ipv6_ext_frag: initial import of statistics module
2020-02-06 13:48:42 +01:00
Martine S. Lenders
ed9f43ab3a
gnrc_sixlowpan_frag_stats: add average fragments per datagram statistic
2020-02-06 13:40:23 +01:00
Martine S. Lenders
27b86f91c0
shell_commands: remove old and redundant lines
2020-02-05 13:35:48 +01:00
Martine S. Lenders
5fd88ab44a
shell_commands: provide command to print version
2020-01-17 10:28:51 +01:00
Leandro Lanzieri
8e6f6ee460
Merge pull request #13065 from PeterKietzmann/pr_kconf_netif
...
Kconfig: Expose gnrc/netif configurations
2020-01-13 13:25:17 +01:00
PeterKietzmann
9e83d12bc0
net/gnrc/netif: Move GNRC_NETIF_IPV6_ADDRS_NUMOF to 'CONFIG_' namespace
2020-01-13 12:28:37 +01:00
MichelRottleuthner
53cb3b087c
Merge pull request #9530 from Hyungsin/forupstream_xtimer
...
sys: xtimer concurrency/robustness improvement
2020-01-13 08:24:15 +01:00
Hyungsin
a18f9318c7
sys/shell/commands: reflecting xtimer's member change
2020-01-10 13:19:36 -08:00
Hauke Petersen
4f9d15d3b1
sys/shell/sc_nimble_netif: adapt event handling
2020-01-10 16:36:12 +01:00
Hauke Petersen
5746795735
shell/sc_nimble_netif: add timing info to ble info
2020-01-10 12:17:07 +01:00
Francisco
dcc5299682
Merge pull request #10667 from miri64/gnrc_sixloenc/enh/6lo-config
...
gnrc_netif: make 6LoENC dynamically configurable
2020-01-06 13:19:24 +01:00
Martine S. Lenders
5cf26f1adf
shell_commands: make 6Lo compression contexts configurable on non-6LBR
2019-12-20 14:55:55 +01:00
Hauke Petersen
210b1b2f75
sys/shell/sc_nimble_netif: adapt event callback
2019-12-18 17:06:57 +01:00
Martine S. Lenders
e1ae44b536
gnrc_sixlowpan_frag_stats: actualize pseudo-module
...
Having the definitions sit in the `net/gnrc/sixlowpan/frag.h` header
does not make much sense, when using Selective Fragment Forwarding
(and the fragmentation buffer already includes a
`net/gnrc/sixlowpan/frag/stats.h` header), so they are moved to their
own header. Since with this change it makes more sense to have the
statistics stored in their own sub-module, the pseudo-module is also
actualized.
2019-12-18 15:45:03 +01:00
8d040e5b4d
sys/shell: add missing stdio include in sc_loramac.c
2019-12-16 16:26:18 +01:00
Francisco Molina
1241bee080
sys/shell/commands/sc_interactive_sync: AVR puts to pgmspace
2019-12-15 20:27:56 +01:00
Hauke Petersen
3ffe08d07a
shell/sc_nimble_netif: allow connect using name
2019-12-09 10:12:44 +01:00
Hauke Petersen
cea260bb4f
shell/sc_gnrc_netif: use fmt_is_number()
2019-12-05 15:39:25 +01:00
Francisco
b88e2ecb6d
Merge pull request #12471 from aabadie/pr/sys/suit_shell
...
sys/suit: sys/shell: examples/suit_update: add shell command for triggering suit updates
2019-11-29 13:32:23 +01:00
Leandro Lanzieri
5481124d86
shell/gnrc_netif: Use netif API
2019-11-29 10:22:00 +01:00
2ff3d4cd8d
sys/shell: add suit shell command
...
This command allows for triggering an update from the device itself
2019-11-28 19:15:34 +01:00
Francisco Molina
838a88f122
sys/shell/commands: add interactive_sync commands
2019-11-27 15:07:42 +01:00
MichelRottleuthner
bf676d4728
Merge pull request #11022 from jia200x/pr/gnrc_lorawan
...
gnrc_lorawan: add support for GNRC based LoRaWAN stack
2019-11-27 09:25:20 +01:00
Jose Alamos
b3593e58cb
sc_netif: add lorawan config commands to shell
2019-11-26 21:52:06 +01:00
42aad0d1ad
sys/shell: fix typos
2019-11-23 22:39:38 +01:00
Francois Berder
4a31f94cfc
many typo fixes
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2019-11-23 22:39:07 +01:00
Francisco Molina
254b54847f
shell/commands/sc_gnrc_rpl.c: fix cpp.check unitialized variable
2019-11-21 11:58:07 +01:00
Leandro Lanzieri
39984b1f51
shell/gnrc_netif: Use ipv6_addr_split_int for prefix
2019-11-15 14:35:30 +01:00
Leandro Lanzieri
1d0f92203b
shell/sntp: Adapt to change in ipv6_addr_split_iface
2019-11-15 14:09:32 +01:00
Leandro Lanzieri
edae993f63
shell/gnrc_icmpv6_echo: Adapt to change in ipv6_addr_split_iface
2019-11-15 14:02:50 +01:00
Hauke Petersen
38d2690a37
shell/sc_nimble_netif: restrict when using autoconn
2019-11-13 12:59:35 +01:00
Martine Lenders
1c7e1c9efd
shell_commands/sc_gnrc_netif: set 6Lo flag
2019-10-30 17:10:34 +01:00
Jose Alamos
f38a786108
sc_gnrc_netif: implement link command
2019-10-30 13:13:06 +01:00
Benjamin Valentin
2ff7c474b7
shell_commands: gnrc_netif: print correct scope for IPv6 addr
...
Previously `ifconfig` would only know link-local addresses
(printed as 'local') and everything else would be 'global'.
This is wrong for site-local and unique local addresses which were
also denoted as global.
So use the already existing helper functions to determine the correct
type of IPv6 address when printing.
2019-10-21 14:47:34 +02:00
Martine Lenders
70dddfd775
Merge pull request #12354 from haukepetersen/opt_nimble_netifmaxconn
...
pkg/nimble/netif: set max conn explicitly
2019-10-07 19:18:40 +02:00
Hauke Petersen
a595f89bbe
pkg/nimble/netif: set max conn explicitly
2019-10-07 14:50:57 +02:00
Kevin "Tristate Tom" Weiss
4b7c5915ec
Merge pull request #10953 from gschorcht/sys/shell/heap_cmd/pr
...
sys/shell: add heap command
2019-10-04 13:49:57 +02:00
Benjamin Valentin
c31e373214
shell_commands: gnrc_netif: only include LoRA options when LoRA PHY is present
...
If no LoRA module is used, there is no use in compiling in all the config options
for LoRA PHYs.
This saves about 1k of .text
2019-09-24 17:14:03 +02:00
Martine Lenders
8911c514fd
Merge pull request #10951 from miri64/gnrc_ipv6_nib/enh/abr-helpers
...
shell/sc_gnrc_ipv6_nib: extend for ABR
2019-09-12 07:34:09 +02:00
Martine Lenders
1656162835
shell_commands: gnrc_ipv6_nib: remove unnecessary cast
2019-09-11 23:51:20 +02:00
Martine Lenders
28ac07d8e5
shell/sc_gnrc_ipv6_nib: extend for ABR
...
Adds functionality to list and edit authoritative border router list.
2019-09-11 23:51:20 +02:00
Kevin "Tristate Tom" Weiss
d6af98b5b7
Merge pull request #11835 from miri64/gnrc_sixlowpan_frag/new/stats
...
gnrc_sixlowpan_frag_stats: initial import of frag statistics
2019-09-11 12:01:22 +02:00
Martine Lenders
0ab0a19871
shell_commands: add command to get 6lo frag statistics
2019-09-11 10:30:29 +02:00
Martine Lenders
0c24bfcd0d
shell_commands: fix ping6 response check for multicast
2019-09-10 21:50:23 +02:00
Francisco Molina
1357f46c47
pkg/semtech-loramac: add uplink_counter get/set functions
2019-09-05 16:01:32 +02:00
Gunar Schorcht
140987fc3a
sys/shell: cleanup the heap command approach
...
Replaces the special heap command approach of the lpc_common module with a more general heap command approach. Module lpc_common was already removed with PR #2118 . PR #2118 integrated cpu/lpc_common code in cpu/lpc2387. With PR #3530 special heap handling for cpu/lpc2387 was replaced by newlib memory management which uses _sbrk_r to allocate chunks from the heap. _sbrk_r uses _sheap and _eheap symbols that are defined in lpc2387.ld and can be used together with mallinfo function for heap statistics.
2019-09-05 09:18:46 +02:00
Francisco Molina
5e1558ba57
shell/commands: fix, only accept proper pong response
2019-09-03 09:07:29 +02:00
Hauke Petersen
33eb83ff42
sys/shell/nimble: make default name more generic
2019-08-29 11:23:51 +02:00
Hauke Petersen
de890bd9a8
sys/shell/nimble: only print ip addr if ipv6 is used
2019-08-29 11:23:51 +02:00
Hauke Petersen
a3b8c87ab5
sys/shell: add 'ble' shell cmd for nimble_netif
2019-08-28 16:48:42 +02:00
Francisco
56a6e5d53e
Merge pull request #11933 from miri64/shell/fix/check-sender
...
shell_commands: check ICMPv6 echo reply sender
2019-08-09 16:27:39 +02:00
Martine Lenders
c12bd5edb1
Merge pull request #11938 from miri64/shell_commands/enh/now-id
...
shell_commands/ping6: mix-in current time into ID
2019-08-09 12:56:54 +02:00
Benjamin Valentin
9279733ed2
sys/shell: remove superfluous explicit cast
2019-08-06 19:43:54 +02:00
Benjamin Valentin
e8dc1119b8
sys: make use of ARRAY_SIZE macro
2019-08-06 19:43:54 +02:00
Martine Lenders
4139370a87
Merge pull request #11952 from PeterKietzmann/pr_ccnl_update_and_bump
...
pkg/ccn-lite: bump version and adapt shell functions accordingly
2019-08-05 10:27:43 +02:00
Cenk Gündoğan
89c3c4e20e
shell/ccn-lite: type fixes
2019-08-02 10:37:47 +02:00
Martine Lenders
1c7d4572a7
shell_commands/ping6: mix-in current time into ID
...
This prevents two fast executions of `ping6` behind each other to
confuse their respective responses.
2019-07-31 09:49:17 +02:00
Martine S. Lenders
4a723fe4fd
shell_commands: check ICMPv6 echo reply sender
...
Fixes #11519 by checking the source address when an echo reply is
received by the `ping6` command.
2019-07-30 12:47:23 +02:00
Martine Lenders
d1abb29665
sc_gnrc_icmpv6_echo: check for correct ipv6_addr_split_iface() error
2019-07-26 16:48:28 +02:00
Martine S. Lenders
36e9d232a6
shell_commands/gnrc_icmpv6_echo: use gnrc_netif_hdr_set_netif()
2019-07-25 15:32:21 +02:00
Martine S. Lenders
6ad3c8d223
shell_commands/gnrc_icmpv6_echo: use netif pointer
...
... instead of numeric network interface identifier
2019-07-25 15:32:02 +02:00
Francisco Molina
41e440a0ef
pkg/semtech-loramac: extended return code doc and debug msg
...
- Add SEMTECH_LORAMAC_ALREADY_JOINED ret code for semtech_loramac_join
- Add SEMTECH_LORAMAC_TX_CNF_FAILED ret code for semtech_loramac_send
- Update shell commands to notify when no ACK is received on cnf tx
2019-07-22 16:12:23 +02:00
Martine S. Lenders
299c1a2959
shell_commands: fix regression to ifconfig introduced in #10350
...
The indentation of `ifconfig` is currently broken, due to an attempt to
fix some `scan-build` errors.
2019-06-26 10:30:26 +02:00
Martine Lenders
2cb0ccc800
shell_commands: gnrc_netif: fix _newline() handling
2019-06-20 16:18:23 +02:00
4e3e174c95
sys/shell/loramac: use global loramac variable
2019-05-29 16:53:53 +02:00
5b8c1e2d26
sys/shell: add loramac command to the shell
2019-05-29 16:53:52 +02:00
Hauke Petersen
3b842ba16a
shell/cord_ep: used COAP_PORT as default port
2019-03-27 18:26:37 +01:00
Marian Buschsieweke
6b0082bb3f
shell: Add command i2c_scan
...
Add a trivial shell program that scans for all slaves on an I2C bus by iterating
all of the possible 127 I2C addresses and checking for the ACK of the device.
2019-03-25 14:10:04 +01:00
Marian Buschsieweke
50e939e808
Merge pull request #11092 from benpicco/rssi_ping
...
shell_commands: include RSSI in ping output
2019-03-15 13:51:22 +01:00
Benjamin Valentin
d89dd0d9e9
shell_commands: include RSSI in ping output
...
I was looking for a quick way to gauge the link quality between two nodes,
so I added the rssi to the output of the ping6 command.
Maybe this is generally useful to have.
2019-03-06 10:58:09 +01:00
MrKevinWeiss
7a220d16a8
sys/shell: Add shell command for app_metadata
...
This make an easily accessable shell command to print app_metadata
2019-03-05 16:10:06 +01:00
Marian Buschsieweke
aaacd16248
sys/shell: NETOPT_MAX_{PACKET_SIZE -> PDU_SIZE}
...
Updated the ifconfig shell command to use NETOPT_MAX_PDU_SIZE instead of the
deprecated NETOPT_MAX_PACKET_SIZE
2019-02-18 20:18:48 +01:00
Martine Lenders
45ec766871
shell_commands: adapt ping6 to original-ping-like implementation
...
Loosely based on [the original ping] and [netutil]'s ping
New features (compared to old RIOT version):
- non-positional parameters
- Better duplicate detection (addresses #9387 )
- Better asynchronous behavior
- Potential for future move to `sock_ip`
- (Optional) DNS-support
- Multithreading-safe (in case shell-command handler gets called
from multiple threads)
[the original ping]: http://ftp.arl.army.mil/~mike/ping.html
[netutil]: https://www.gnu.org/software/inetutils/
2019-02-04 12:42:49 +01:00
Peter Kietzmann
b927c6ffa6
Merge pull request #10923 from maribu/ifconfig_l2pdu
...
shell/ifconfig: Add L2-PDU info
2019-02-04 08:55:32 +01:00
Marian Buschsieweke
996a837fff
shell/ifconfig: Add L2-PDU info
...
When IPv6 is enabled, the MTU is given. So users(*) sending IPv6 packets can
easily figure out what the supported maximum protocol unit is.
However, when IPv6 is disabled and a user wants to send layer 2 frames directly,
no information about the maximum PDU is available using the shell.
When 6LoWPAN is used, a user may be interested in the layer 2 PDU as well in
order to avoid layer 2 fragmentation.
This PR adds the L2-PDU info to the output of the ifconfig shell command, which
is printed regardless of the use of IPv6.
(*): Here "users" refers to human beings interacting with the shell.
Applications can get the maximum PDU of each layer more easily using
gnrc_netapi_get() with NETOPT_MAX_PACKET_SIZE instead of using a shell command.
2019-02-01 16:55:16 +01:00
Marian Buschsieweke
0351577e18
shell/ifconfig: Fixed stringification
2019-02-01 16:22:37 +01:00
Marian Buschsieweke
d180339e5a
sys/shell: Removed fragments of old driver
...
The shell handlers of the old, depreciated and removed LTC4150 driver are still
in place. This commit removes them
2019-01-28 13:33:14 +01:00
Martine Lenders
28204e0a4f
sc_gnrc_ipv6_nib: check interface existence
...
Currently an interface's existence is not checked when it is supplied
by the user with the `nib` command. This can lead to assertion errors
as soon as the generated entry tries to resolve an address or route
generated with that command and the network interface not being found.
2019-01-28 09:16:51 +01:00
Martine Lenders
8bd9e0f0c2
shell: sc_icmpv6_echo: release payload when pktbuf full
...
Otherwise it gets never released
Co-Authored-By: Gunar Schorcht <gunar@schorcht.net>
2019-01-15 15:07:46 +01:00
Martine Lenders
e88abc49b8
shell_commands/sc_gnrc_netif: get 6Lo flag
2019-01-03 16:21:52 +01:00
Marian Buschsieweke
92347a0dd8
sys/shell: Removed unneeded cpp directives
2018-12-18 16:37:52 +01:00
Martine Lenders
e4a922260e
shell_commands/ifconfig: mark TENTATIVE addresses correctly
2018-12-04 15:53:46 +01:00
cladmi
ebd438cb58
sys/shell: select sc_rtc on USEMODULE
...
sc_rtc.c should only be compiled if periph_rtc module is actually used.
In practice there was not linking error when PERIPH_OPTIONAL|_REQUIRED
was not set as shell_commands hides calling the functions with
'#ifdef MODULE_PERIPH_RTC'.
2018-11-19 16:00:43 +01:00
Hauke Petersen
cfe4370a95
sys/shell/rdcli: rename to sc_cord_ep.c
2018-10-17 15:21:49 +02:00
Hauke Petersen
152623577e
net/rdcli_config: rename to cord_config
2018-10-17 09:29:19 +02:00
Hauke Petersen
787524400c
net/rdcli_common: rename to cord_common
2018-10-17 09:29:19 +02:00
Hauke Petersen
899d7fee8a
shell: add shell command for rdcli
2018-10-12 14:41:40 +02:00
Joakim Nohlgård
3466a862df
Merge pull request #9985 from kaspar030/add_missing_string.h_includes
...
sys: add missing <string.h> includes
2018-09-21 06:51:01 +02:00
3db24b4603
sys: saul: add missing stddef.h include (for NULL)
2018-09-20 23:54:46 +02:00
05b6af466c
sys: add missig <string.h> includes
2018-09-20 23:47:40 +02:00
smlng
990a76c80c
pkg: update ccn-lite and adapt shell commands
...
This updates the ccn-lite package version which brings in the
latest upstream fixes for some compiler issues found on macOS
with clang and newer GCC versions.
A minor adaption of the RIOT shell commands is also included.
2018-08-10 10:21:24 +02:00
Sebastian Meiling
26c689ffbb
Merge pull request #9548 from RIOT-OS/new_i2c_if3
...
I2C: introduce and adapt new I2C interface (2nd attempt)
2018-08-02 12:00:59 +02:00
7a12293eb1
drivers/at30tse75x: adapt to new I2C api
2018-07-25 12:01:38 +02:00
Gaëtan Harter
eec88e3e53
shell/sc_can: fix uninitialized warning
...
When compiled for `hifive1` board with `gcc-7.2.0` this warning was raised:
'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]
2018-07-24 13:58:21 +02:00
Marian Buschsieweke
de9b67bdc2
drivers/sht1x: Major refactoring
...
- Use RIOT's GPIO interface to access the sensor to increase portability
- Changed API to allow more than one sensor per board
- Added `sht1x_params.h` that specifies how the sensors is connected - each
board can overwrite default settings by #defining SHT1X_PARAM_CLK and
SHT1X_PARAM_DATA
- Changed arithmetic to use integer calculations only instead of floating point
arithmetic
- Added support for checking the CRC sum
- Allow optional skipping of the CRC check to speed up measuring
- Added support for advanced features like reducing the resolution and skipping
calibration to speed up measuring
- Allow specifying the supply voltage of sensor which heavily influences the
temperature result (and use that information to calculate the correct
temperature)
- Reset sensor on initialization to bring it in a well known state
- Support for the obscure heater feature. (Can be useful to check the
temperature sensor?)
- Updated old SHT11 shell commands to the new driver interface, thus allowing
more than one SHT10/11/15 sensor to be used
- Added new shell command to allow full configuration of all attached SHT1x
sensors
- Removed old command for setting the SHT11 temperature offset, as this feature
is implemented in the new configuration command
2018-06-27 08:58:00 +02:00
Marian Buschsieweke
d208c224b0
drivers: Renamed module sht11 to sht1x
...
The sensor family SHT10, SHT11 and SHT15 only differ in their accuracy (as in
calibration, not as in resolution). Thus, the same driver can be used for all.
The new driver name better reflects this fact.
2018-06-27 08:57:58 +02:00
Martine Lenders
a6a7357077
shell_commands: add command for packet buffer stats
...
I'm using something like this command for a while now for debugging
GNRC. Usually, I just patch it into the application I'm using it with,
but I think there is a benefit to also provide it to RIOT upstream
properly.
2018-06-22 09:51:17 +02:00
7d013eb2b6
sys: fix doxygen grouping
2018-06-11 19:12:02 +02:00
PeterKietzmann
d3d012c077
shell/ccnl: use new CS add method
2018-06-10 12:11:44 +02:00
BytesGalore
0c034c9220
rpl: add DIS Solicited Information option
2018-06-04 18:10:22 +02:00
Marian Buschsieweke
b4b088be9e
shell_commands/ping6: Fixed bug in calculation of average round trip time
...
The average rout trip time has been to low in case packets were lost, as lost
packets were treated as if that had an RTT of 0.
2018-05-29 12:36:05 +02:00
Cenk Gündoğan
441f11ea45
gnrc_rpl: shell: adapt to evtimer for RPL events
2018-05-23 09:42:12 +02:00
Cenk Gündoğan
4c9e947d43
gnrc_rpl: adjust author and copyright
2018-05-22 23:46:55 +02:00
Bas Stottelaar
7781da7799
sys: netopt: add busy option
2018-05-21 16:37:38 +02:00
Bas Stottelaar
02395e593d
sys: netopt: add checksum option
2018-05-21 16:37:38 +02:00
Martine Lenders
dbccf06c5e
Merge pull request #8575 from miri64/shell/fix/6ctx
...
shell: adapt 6ctx command for NIB
2018-04-13 17:12:41 +02:00
PeterKietzmann
86c319aea7
pkg/ccn-lite:enable CS dump and rename shell command
2018-04-09 10:38:32 +02:00
Martine Lenders
ce807173ff
Merge pull request #8601 from bergzand/pr/netopt-link-status
...
netopt/drivers: Add phy link status output
2018-03-18 15:25:01 +00:00
9d61314c09
shell/netif: Add link status to interface status output
2018-03-18 15:32:40 +01:00
Cenk Gündoğan
92b761df2f
pkg: ccn-lite: minor changes to integrate latest ccn-lite features
2018-03-05 21:25:26 +01:00
Martine Lenders
ed0fbbb2a3
shell: adapt 6ctx command for NIB
...
This somehow was left by the wayside when we moved from the old ND to
the NIB. Also piggybacks some fixes.
2018-02-16 12:22:56 +01:00
4ec8f4c2fc
sys: instead of cpp-style, use C-style comments
2018-02-06 16:59:58 +01:00
Martine Lenders
e6fa76e9b0
shell_commands: sntp: increase default timeout
2018-01-30 21:07:26 +01:00
Martine Lenders
3c5d476f84
shell_commands: specify SNTP timeout time unit
2018-01-30 21:07:26 +01:00
smlng
928292f464
sys/shell: fix format error in debug output
2018-01-17 15:25:15 +01:00
Michel Rottleuthner
bbd8d67bf9
address request by miri64 (interface as shell param)
2018-01-14 16:55:14 +01:00
Michel Rottleuthner
3056104187
sc_sntp: set netif when using link local address
2018-01-12 19:09:37 +01:00
d4d18d99af
sys/shell: adapt ifconfig to work with sx127x devices
2017-12-14 16:13:39 +01:00
PeterKietzmann
4bd1d0ec9f
shell/netif: extend set state option
2017-12-13 15:26:03 +01:00
Cenk Gündoğan
b6581289a2
pkg: ccn-lite: adapt to v2
2017-12-01 16:14:27 +01:00
Peter Kietzmann
eb2c0e29ab
Merge pull request #8155 from RIOT-OS/revert-8009-revert-7238-pr_sc_ccnl_chunkdump
...
Revert "Revert "shell/ccnl: remove use of ccnl_wait_for chunk()""
2017-11-28 21:36:38 +01:00
smlng
b283b7784c
make: fix various compile errors with Wextra
...
pkg, nordic_softdevice_ble: disable CFLAGS to omit compiler error
sys, pm_layered: fix casting nonscalar to the same type
cpu, stm32_common: fix type-limits, remove always true assert
cpu, stm32f4: fix pointer arithmetic in periph/i2c
drivers, at86rf2xx: fix type-limits where condition always true
saul, gpio: fix if no gpio configured for saul
cpu, saml21: add frequency check to periph/timer
driver, cc110x: fix unused param and type-limts errors
boards, wsn430-common: fix old-style-declaration
make: fix old style definition
drivers, sdcard_spi: fix old style typedef
driver, at30tse: remove unnecessary check
driver, nrf24: fix type-limit
driver, pn532: change buffer from char to uint8_t
tests/driver_sdcard: fix type limits
boards, feather-m0: add missing field inits
driver, tcs37727: fix type limits
pkg, emb6: disable some compiler warnings
tests/emb6: disable some compiler warings
pkg, openthread: fix sign compare and unused params
tests/trickle: fix struct init
tests/pthread_cooperation: fix type limits
board, mips-malta: remove feature periph_uart
shell: fix var size for netif command
gnrc, netif: fix sign-compare
gnrc, nib: fix sign-compare
shell: fix output in netif command
posix: fix type-limits in pthread_cond
2017-11-28 18:31:43 +01:00
