Gabriel Moyano
2367ff3885
boards/blxxxpill: add TIM1, TIM3 and TIM4 as qdec dev
2020-05-29 22:08:25 +02:00
Marian Buschsieweke
dfa6863275
cpu/atmega{1281,2560}: Relocate default timer config
2020-05-28 16:27:08 +02:00
Marian Buschsieweke
044a3f9a4c
cpu/atmega1284p: Relocate default timer config
2020-05-28 16:27:07 +02:00
Marian Buschsieweke
200afc46fa
cpu/atmega328p: Relocate default timer config
2020-05-28 16:27:07 +02:00
Marian Buschsieweke
a950d6bbb6
cpu/atmega{128rfa1,256rfr2}: Relocate default timer config
2020-05-28 16:27:07 +02:00
Marian Buschsieweke
9138e48746
cpu/atmega32u4: Relocate default timer config
2020-05-28 16:27:06 +02:00
97f98dcace
boards/stm32: remove useless ifdef around DMA config
2020-05-25 13:23:20 +02:00
facb626b02
boards/stm32*: adapt for new stm32 cpu organization
2020-05-20 13:39:10 +02:00
Benjamin Valentin
59f3c1b48b
boards/samd21-arduino-bootloader: add support for UF2 bootloader
2020-05-19 16:58:58 +02:00
benpicco
9f707bf121
Merge pull request #14057 from bergzand/pr/nrf52/dma_spi
...
nrf52: Implement EasyDMA-based SPI peripheral implemenation
2020-05-18 19:42:33 +02:00
1e15bb2680
particle-mesh: Adapt SPI periph config
2020-05-18 19:18:29 +02:00
628d3e9080
nrf52: Adapt SPI periph config
2020-05-18 19:18:29 +02:00
Marian Buschsieweke
7cf49d145d
boards/common/nrf52: Allow external boards
...
Replace `$(RIOTBOARD)/$(BOARD)` with `$(BOARDDIR)`, which also works for
external boards. This allows external boards to build on top of
`$(RIOTBOARD)/common/nrf52`.
2020-05-14 13:56:12 +02:00
benpicco
e3591535ce
Merge pull request #13972 from Citrullin/nrf52_bmp
...
Add bmp config for nrf52
2020-05-12 16:59:34 +02:00
Philipp Blum
3240dfc0b2
boards/common/nrf52: add config for bmp
2020-05-12 15:54:38 +02:00
benpicco
e45777d077
Merge pull request #13809 from Vinggui/master
...
Added a new flashing parameter for generic cheap St-link and bluepill(-128kib) boards.
2020-05-12 11:48:43 +02:00
5773db93f8
Merge pull request #14025 from fjmolinas/pr_nrf5x_rtt_conf
...
boards/common/nrf5x: add configurable RTT_FREQUENCY
2020-05-05 17:46:05 +02:00
343dc3f90f
Merge pull request #13909 from fjmolinas/pr_stm32_rtt
...
cpu/stm32_common: make RTT_FREQUENCY configurable
2020-05-05 16:45:39 +02:00
Francisco Molina
409185c5ce
boards/common/nrf5x: add configurable RTT_FREQUENCY
...
Adds: RTT_MAX_FREQUENCY, RTT_MIN_FREQUENCY & RTT_CLOCK_FREQUENCY
2020-05-05 14:52:55 +02:00
Francisco Molina
b5bcf26e0f
cpu/stm32_common: make RTT_FREQUENCY configurable
...
Adds: RTT_MAX_FREQUENCY, RTT_MIN_FREQUENCY & RTT_CLOCK_FREQUENCY
2020-05-05 14:36:31 +02:00
Benjamin Valentin
dc58ef59ae
boards: remove duplicate gnrc_netdev_default from Makefile.dep
...
`gnrc_netdev_default` will pull in `netdev_default`, so no need to
check for both in `Makefile.dep`
2020-05-05 09:58:45 +02:00
Vinicius G. Guimaraes
f8776a989f
boards/blxxxpill: add support for stm32duino bootloader and for generic St-Link V2.
2020-05-04 19:36:15 -07:00
Dylan Laduranty
57c1a49a82
Merge pull request #13957 from benpicco/cpu/samd21-pwm_flex
...
cpu/samd21: PWM don't hard-code number of channels to 3
2020-05-02 20:52:56 +02:00
Dylan Laduranty
76870721fe
Merge pull request #13965 from benpicco/cpu/sam0_common/periph/dac
...
cpu/sam0_common: implement periph/dac
2020-05-02 20:34:40 +02:00
Benjamin Valentin
777931bcdc
boards/common/saml1x: enable DAC
...
Both saml10-xpro and saml11-xpro expose PA02 on the pin header, so
we can enable the DAC feature.
2020-05-02 18:31:55 +02:00
Francisco Molina
b78e4efb56
cpu/stm32f1: dont provide periph_rtc at cpu level
...
stm32f1 periph_rtc implementation gets a 1s resolution by dividing
CLOCK_LSx by 32768. This only make sense if CLOCK_LSE is set,
otherwise CLOCK_LSI=~40000, which will lead to an imprecise rtc.
2020-04-27 08:59:21 +02:00
Benjamin Valentin
393105a9e1
boards/common/arduino-mkr: update PWM configuration
2020-04-26 22:52:29 +02:00
Francisco Molina
a72abe5903
boards/common/blxxxpill: provide periph_rtt
2020-04-24 10:44:57 +02:00
Francisco Molina
4d398ab09e
cpu/stm32f1: add unified rtt configuration
2020-04-24 08:57:04 +02:00
Marian Buschsieweke
fdf955cfb2
Merge pull request #13899 from Hoernchen20/stm32f1_adc
...
boards/blxxxpill: improve adc
2020-04-22 23:07:26 +02:00
Hoernchen20
c64f7f72c2
boards/common/blxxxpill: Drop ADC lines used for stdio
2020-04-22 21:16:20 +02:00
Hoernchen20
4e87682ba1
boards/common/blxxxpill: Add internal ADC lines
2020-04-22 21:08:20 +02:00
Leandro Lanzieri
75b371ccb0
boards/common/msba2: Set RTS and DTR to 0 when using Miniterm
2020-04-22 08:08:23 +02:00
benpicco
17f1a85bf1
Merge pull request #12415 from maribu/nucleo_board_init
...
boards/common/nucleo: Marked board_init as weak
2020-04-16 23:30:19 +02:00
73615d690d
boards/stm32l4: introduce common clock configuration
2020-04-07 17:42:56 +02:00
010aca2638
Merge pull request #13719 from aabadie/pr/boards/flash_export_remove
...
boards*: remove remaining uses of export with some openocd related variables
2020-04-07 11:58:28 +02:00
0f9e56d0ff
boards/samd21-bootloader: don't use bootloader with slipdev_stdio
2020-04-02 16:42:37 +02:00
fc7e98b60c
boards/samd21-arduino: exclude reset with usb-board-reset macro
2020-04-02 16:41:53 +02:00
Francisco Molina
72a2220d21
boards/common/nrf52: include Makefile.board.dep in hack
...
nrf52 includes include $(RIOTBOARD)/$(BOARD)/Makefile.dep to know
if `nordic_softdevice_ble` is used, this changes dependency
resolution sinnce -include $(APPDIR)/Makefile.board.dep should
be resolved before.
This can be removed once #9913 is if `nordic_softdevice` is
deprecated.
2020-04-02 14:51:22 +02:00
cd0b765346
Merge pull request #13664 from fjmolinas/pr_samd21_bootloader_default_module
...
boards: set samd21-arduino-bootloader as DEFAULT_MODULE
2020-04-01 21:42:42 +02:00
Francisco Molina
1387b736b7
boards: conditionally include samd21-arduino-bootloader
...
samd21-arduino-bootloader and its dependencies will only be
included if no other stdio_% (other than stdio_cdc_acm) is included.
2020-04-01 15:10:32 +02:00
Dylan Laduranty
6bba4188fc
Merge pull request #13764 from benpicco/cpu/saml11/use_buck_converter
...
cpu/saml1x: select buck voltage regulator when possible
2020-04-01 14:47:47 +02:00
Benjamin Valentin
2d14a328c4
board/common/saml1x: enable buck converter
2020-03-31 17:18:58 +02:00
Francisco Molina
8437673237
boards/common/cc2538/include: re-order timer config
2020-03-30 16:09:18 +02:00
f3dd7e0e2a
boards*: don't export PRE_FLASH_CHECK_SCRIPT
2020-03-26 09:37:27 +01:00
f2aa38c8f9
boards*: don't export OPENOCD_PRE_FLASH_CMDS
2020-03-26 09:31:22 +01:00
91d883df47
boards*: don't export OPENOCD_PRE_VERIFY_CMDS
2020-03-26 09:31:21 +01:00
benpicco
e9b71254ff
Merge pull request #13694 from fjmolinas/pr_boards_common_cc2538
...
boards: add common cc2538
2020-03-25 11:11:50 +01:00
bf2b495d34
Merge pull request #13703 from fjmolinas/pr_usbus_autoinit
...
Makefile.dep: add auto_init_usbus as usbus DEFAULT_MODULE
2020-03-25 10:19:04 +01:00
Francisco Molina
e220483adc
boards: p-nucleo-wb55 initial support
2020-03-25 09:29:57 +01:00
