MrKevinWeiss
17cce015d4
treewide/stm32: Make CLOCK_HS* configurable
2022-11-03 11:37:28 +01:00
Marian Buschsieweke
1fd9913293
boards/common/stm32: clean up LED definitions
...
Let boards only define the port and pin number of each LEDs. The common
definitions in `stm32_leds.h` will provide `LED<x>_ON`, `LED<x>_OFF`,
`LED<x>_TOGGLE`, `LED<x>_PIN`, `LED<x>_MASK` and `LED<x>_PORT`.
In addition to code de-duplication, this also makes it easier to use
LEDs in GPIO LL, which can be beneficial for super low overhead
debugging output - e.g. when a bug is timing sensitive and `DEBUG()`
would spent to much time for stdio to reproduce a bug.
2022-08-08 23:35:06 +02:00
Benjamin Valentin
5d111e71aa
boards: drop board_init() from board.h
2022-02-25 15:08:58 +01:00
Fabian Hüßler
9163d78910
boards: add VBAT for stm32 based boards with ADC
2022-02-21 10:49:43 +01:00
Marian Buschsieweke
9c77cd8d55
boards/msbiot: fix param for MPU9150
...
When the driver for the mpu9150 has been renamed to mpu9x50, the
corresponding macro in the MSB-IoT board was forgotten to be renamed
as well. This fixes the issue.
2021-04-07 15:18:30 +02:00
39e06babf5
boards/stm32: use generic clk_conf.h header
2020-10-27 08:44:56 +01:00
95fb362a5c
boards/stm32f4xx: use 180MHz default clock header
2020-10-06 22:07:19 +02:00
721625011e
boards/stm32f4*: use new clock configuration scheme
2020-10-06 16:10:05 +02:00
hugues
58fbd8b443
boards/msbiot: declare adc_config[] directly in periph_conf.h
2020-08-27 03:56:26 +02:00
32a1f3ae76
msbiot: remove obsolete spi_divtable include
2020-08-18 16:55:03 +02:00
97f98dcace
boards/stm32: remove useless ifdef around DMA config
2020-05-25 13:23:20 +02:00
70e3bf84b0
msbiot: Add DMA config for SPI
2020-05-25 11:42:10 +02:00
28f00f731f
boards/stm32: remove obsolete UART DMA ISR defines
2020-05-20 08:49:22 +02:00
d8ec0b292f
boards/stm32f4: Set DMA_STREAM_UNDEF for UART DMA
...
This PR sets the DMA configuration for the UART peripherals on the
stm32f4 boards to the undef value to disable the DMA. This to prevent
from accidentally configuring the DMA to stream 0 channel 0 when
enabling DMA.
2020-05-20 08:49:22 +02:00
Yannick Gicquel
d37adee32d
boards/stm32-based: allow SPI signals routed on multiple alternate functions
...
There is no hardware limitation for custom boards based on STM32 to uses
SPI bus with signals coming from different PORT and alternate functions.
This patch allow alternate's function definition per pin basis, thus enable
the support of SPI bus signals routed on differents PORT.
Signed-off-by: Yannick Gicquel <ygicquel@gmail.com>
2019-10-25 06:27:41 +02:00
Marian Buschsieweke
137c2c0adf
boards: Added cc110x params for MSB-A2 & MSB-IoT
2019-08-20 16:38:49 +02:00
Benjamin Valentin
8af04cd939
boards: make use of ARRAY_SIZE macro
2019-08-06 19:43:54 +02:00
Marian Buschsieweke
67631f3ae8
boards/msbiot: Added missing doc in board.h
...
- Fixes warnings with current Doxygen version
- Resolves issue with Doxygen linking e.g. LED0_PIN to the doc of a different
board
2019-06-28 16:46:46 +02:00
Kevin Weiss
8468fe1c94
Merge pull request #8516 from jia200x/wiki_dox_convertion
...
doc: move wiki to Doxygen documentation (second attempt)
2018-08-07 13:27:04 +02:00
Jose Alamos
7b28fbf110
boards: fix Doxygen group directives
2018-08-01 15:24:55 +02:00
4e09a2b6b7
boards*: adapt stm32f4 based board with new i2c conf style
2018-07-25 12:01:37 +02:00
d8c3e1da4e
Merge pull request #8549 from haukepetersen/opt_boards_stm32-clk-f4-180
...
boards/stm32-based: use shared configuration snippets
2018-06-12 20:48:01 +02:00
Marian Buschsieweke
a0f35c9b35
boards/msbiot: Added on-board buttons & LEDs as defalt SAUL devices
2018-05-29 09:33:57 +02:00
Marian Buschsieweke
ce57a574df
boards/msbiot: Added support for on-board buttons
2018-05-29 09:33:08 +02:00
Hauke Petersen
079f3c08d4
boards/stm32f4-based: use shared 168MHz clock conf
2018-05-24 19:00:42 +02:00
Marian Buschsieweke
d97340cd5d
boards/msbiot: Added/updated configuration for the cc110x transceiver
...
- Adjusted `#define`s to match the naming convention of `cc110x_params.h`
- Enable the `cc110x` module if `netdev_default` or `gnrc_netdev_default` is
used
2018-05-21 23:00:06 +02:00
b78c96ffc7
boards/*: make brief description consistent
2018-01-24 08:30:56 +01:00
a860cb74f0
boards/msbiot: adapt board config for mpu9150 to new params scheme
2017-11-08 09:09:21 +01:00
Vincent Dupont
fc9fc57aa6
boards: adapt stm32f[2|4|7] boards clock config
2017-08-28 17:51:00 +02:00
Hauke Petersen
73ede74cd8
cpu/stm32: unified and cleaned up DAC driver
...
- removed neccessity to define empty `DAC_NUMOF 0` for each STM
base board
- adapted all board configs to this
- joined stm32f2 to use common DAC driver
- improved code of DAC driver
2017-06-29 13:03:12 +02:00
Vincent Dupont
b3e7dd84f9
boards: update stm32f4-based boards with stmclk
2017-06-08 16:51:17 +02:00
882bcff048
boards: replace @brief with @name when necessary
2017-04-13 12:10:30 +02:00
6f98e81b17
Merge pull request #6759 from OTAkeys/pr/nucleo-i2c-clock
...
boards: fix I2C_APBCLK value in stm32-based boards
2017-03-31 12:37:07 +02:00
Vincent Dupont
bb52575d45
boards: fix I2C_APBCLK value in stm32-based boards
2017-03-17 12:56:54 +01:00
Victor Arino
34b9c04d9d
boards/msbiot: use LED defines
2017-03-13 21:13:37 +01:00
Vincent Dupont
c302b7601d
boards: fix stm32-based boards with new gpio driver
2017-03-13 15:09:31 +01:00
a3497539c2
boards: fix PWM doxygen doc in periph_conf
2017-02-16 17:59:21 +01:00
ebc35a0613
boards: fix doxygen @brief in periph.conf
2017-01-27 10:31:56 +01:00
Hauke Petersen
0edef2a0e1
cpu/stm32*+boards: adapted to new SPI API
...
- adapted the SPI driver
- adapted all boards using the CPU
2017-01-25 16:46:45 +01:00
Oleg Hahm
7ee7801c10
*: remove trailing underscores from header guards
2017-01-19 18:30:53 +01:00
Hauke Petersen
8f47aee78b
boards/stm32-based: adapted PWM configuration
2017-01-17 14:08:39 +01:00
Hauke Petersen
55c6c4582b
boards/stm32-based: adapted UART configuration
2017-01-05 11:00:18 +01:00
Pieter Willemsen
a0835ccb1d
stm32: use periph_clk_en/dis functions for clock changes
2016-12-16 15:01:56 +01:00
Hauke Petersen
7b856cda30
boards/stm32-based: adapted PWM configuration
2016-12-15 12:18:39 +01:00
Hauke Petersen
ab12d60d05
boards/stm32-based: adapted timer configurations
2016-12-09 12:20:04 +01:00
Hauke Petersen
0190cef1d5
boards: cleaned up UART conf for stm32f4 based boards
2016-03-16 12:24:52 +01:00
Hauke Petersen
c1aef11844
boards/msbiot: unified LED defines
2016-03-15 16:24:49 +01:00
Hauke Petersen
02194dad64
boards/msbiot: adapted DAC configuration
2016-03-14 20:39:32 +01:00
Hauke Petersen
e25d1c9dc5
boards/msbiot: adapted to ADC interface changes
2016-03-14 13:06:22 +01:00
Joakim Nohlgård
e2f7ac78f0
Merge pull request #4040 from gebart/pr/periph-timer-init-freq
...
periph/timer: Change timer_init API to support arbitrary (integer) frequencies
2016-02-15 23:36:44 +01:00
