RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity
30,690 Commits 40 Branches 189 Tags 262 MiB
7967066f51
Commit Graph

2663 Commits

Author SHA1 Message Date
Benjamin Valentin
cfc2feca1d ieee802154: return PDU based on PHY mode 
IEEE 802.15.4g-2012 specifies a PDU of 2047 for it's PHY modes, so
query the driver for the mode before returning the PDU.

If none of the new modes is used, don't query the driver to not incure
a penalty on existing platforms.
 2020-04-29 10:41:37 +02:00
Akshai M
e6924e525d drivers/slipdev : Expose to Kconfig 
Expose configurations to Kconfig
 2020-04-29 09:42:59 +05:30
Akshai M
b4451ffd43 drivers/slipdev : Add CONFIG_ 
Add CONFIG_ prefix to SLIPDEV_BUFSIZE
 2020-04-29 09:42:10 +05:30
Alexandre Abadie
c0f46c06bb
drivers/stmpe811: provide adaption to touch_dev interface 2020-04-28 18:18:01 +02:00
Alexandre Abadie
3d557556e0
sys: add interface for generic touch device 2020-04-28 18:17:31 +02:00
Akshai M
817370c46b drivers/sps30 : Expose to Kconfig 
Expose configurations to Kconfig
 2020-04-28 20:11:11 +05:30
Akshai M
819a36d513 drivers/sps30 : Add CONFIG_ 
Add CONFIG_ prefix to SPS30_ERROR_RETRY
 2020-04-28 20:10:21 +05:30
Alexandre Abadie
81c2b08d9b
drivers/disp_dev: use const qualifier 2020-04-28 13:14:52 +02:00
Akshai M
f796664eed drivers/opt3001 : Expose to Kconfig 
Expose configurable parameters to Kconfig

Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-04-27 13:59:38 +05:30
Akshai M
abb1477ffe drivers/opt3001 : Define Options 
Define choices for macros.
 2020-04-27 13:59:37 +05:30
Akshai M
80534dfc36 drivers/opt3001 : Add CONFIG_ 
Add CONFIG_ prefix to compile time configurations
 2020-04-27 13:59:37 +05:30
Akshai M
0277b0facc drivers/pn532 : Expose to Kconfig 
Expose configurations to Kconfig
 2020-04-25 23:06:07 +05:30
Akshai M
53c988a06c drivers/pn532 : Add CONFIG_ 
ADD CONFIG_ prefix to PN532_BUFFER_LEN
 2020-04-25 22:33:34 +05:30
Benjamin Valentin
d955836187 drivers/ethos: use luid_get_eui48() 
Previously the MAC address of the border router was entirely random.
That meant that as a DHCPv6 client it would get a new prefix with every
reboot.

Due to #12210 the nodes will never use the new address.

Fix this by using luid_get_eui48() which will always return the same
address across reboots.

It also makes the code simpler.
 2020-04-24 21:18:21 +02:00
Francisco Molina
922b35da2d
drivers/xbee: disable CTS/RTS pin unless periph_uart_hw_fc is used 
If usinng an arduino xbee shield then CTS pin will be wired to the
ICSP connector RESET pin.

If also used on an arduino-% board then if xbee is busy sending or
receiving data it will assert CTS and this will trigger a reset on
the board.

To avoid this disable CTS functionality on start up unless hardware
flow control is explicitly requested.
 2020-04-24 10:54:36 +02:00
Francisco Molina
0c0f8ec98f
drivers/periph/rtt.h: add RTT_FREQUENCY & RTT_MAX_VALUE doc 2020-04-23 22:11:16 +02:00
Francisco Molina
2604971753
drivers/periph/rtt.h: ensure RTT_MAX_VALUE is set 2020-04-23 19:07:18 +02:00
Leandro Lanzieri
341916cd30
Merge pull request #13915 from akshaim/Kconfig_mag3110 
drivers/mag3110 : Expose Configurations to Kconfig
 2020-04-23 13:21:34 +02:00
Akshai M
fc3ff2a9d9 drivers/mag3110 : Expose to Kconfig 
Expose Configurations to Kconfig

Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-04-23 15:50:26 +05:30
Akshai M
9c052a6288 drivers/mag3110 : Add CONFIG_ 
Add CONFIG_ Prefix for MAG3110_I2C_ADDRESS
 2020-04-23 15:49:55 +05:30
Akshai M
c654b4ea3c drivers/motor_driver : Expose to Kconfig 
Expose Configurations to Kconfig

Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-04-23 15:21:17 +05:30
Akshai M
39826d6e5b drivers/motor_driver : Add CONFIG_ 
Add CONFIG_ Prefix for MOTOR_DRIVER_MAX
 2020-04-23 15:21:17 +05:30
Leandro Lanzieri
c2c32a42f5
Merge pull request #13926 from akshaim/Kconfig_mma8x5x 
drivers/mma8x5x : Expose Configurations to Kconfig
 2020-04-23 09:20:09 +02:00
Akshai M
ec98054bea drivers/mma8x5x : Expose to Kconfig 
Expose Configurations to Kconfig
 2020-04-22 22:02:34 +05:30
Akshai M
7e3096eae1 drivers/mma8x5x : Add CONFIG_ 
Add CONFIG_ Prefix for CONFIG_MMA8X5X_I2C_ADDRESS
 2020-04-22 21:57:05 +05:30
Leandro Lanzieri
ee7493429b
Merge pull request #13885 from akshaim/Kconfig_at86rf215 
drivers/at86rf215 : Expose Configurations to Kconfig
 2020-04-22 13:59:29 +02:00
Leandro Lanzieri
7284434656
Merge pull request #13910 from akshaim/Kconfig_dose 
drivers/dose.h : Expose Configurations to Kconfig
 2020-04-22 12:39:30 +02:00
Akshai M
7b2591ea09 drivers_at86rf215 : Expose to Kconfig 
Expose Configurations to Kconfig

Co-Authored-By: benpicco <benpicco@googlemail.com>
Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-04-22 15:55:21 +05:30
Akshai M
68e2fc5845 drivers/at86rf215 : Add CONFIG 
Add CONFIG_ Prefix for configuring AT86RF215_TRIM_VAL
 2020-04-22 15:54:33 +05:30
Akshai M
8617991312 drivers/at86rf215 : Add CONFIG_ 
Add Add CONFIG_ Prefix for AT86RF215_USE_CLOCK_OUTPUT and model
it as a bool

Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-04-22 15:54:33 +05:30
Koen Zandberg
19119f142a
Merge pull request #13558 from fjmolinas/pr_mtd_powerup 
drivers/mtd_spi_nor: power up MTD on init
 2020-04-21 13:53:07 +02:00
Akshai M
3a65d163f6 drivers/dose : Expose to Kconfig 
Expose Configurations to Kconfig

Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-04-21 16:00:25 +05:30
Akshai M
0784190c9c drivers/dose : Add CONFIG_ 
Add CONFIG_ Prefix for DOSE_TIMEOUT_USEC
 2020-04-21 16:00:25 +05:30
Francisco Molina
61eecf6fe0
drivers/mtd_spi_nor: power up MTD on init 2020-04-21 11:09:40 +02:00
Francisco Molina
8a256eba12
drivers/mtd_spi_nor: return error on invalid manuf id 2020-04-21 11:09:40 +02:00
Akshai M
be097f8533 drivers/cc110x : Expose to Kconfig 
Expose Configurations to Kconfig
 2020-04-17 23:55:07 +05:30
Akshai M
01a8c64e39 drivers/cc110x : Add CONFIG_ 
Add Add CONFIG_ Prefix for CC110X_DEFAULT_CHANNEL
 2020-04-17 23:27:01 +05:30
Leandro Lanzieri
2f75c60527
Merge pull request #13881 from akshaim/kconfig_ads101x 
drivers/ads101x : Expose Configurations to Kconfig
 2020-04-17 15:39:07 +02:00
Leandro Lanzieri
369eda6bd9
Merge pull request #13831 from akshaim/I2C_Address_Cleanup 
I2C Address Cleanup and Documentation
 2020-04-17 13:42:35 +02:00
Akshai M
137a1c08b4 drivers/ads101x : Expose to Kconfig 
Expose Configurations to Kconfig

Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-04-17 16:43:16 +05:30
Akshai M
b20e408854 drivers/ads101x : Add CONFIG_ 
Add CONFIG_ Prefix for configuring the Compile time macros
 2020-04-17 16:43:16 +05:30
Akshai M
b75fc0cfa6 drivers/include/tcs37727.h : Remove ifndef for I2C 
Remove ifndef and better formatting for Doxygen
 2020-04-17 15:45:37 +05:30
Akshai M
de5db5c99d drivers/include/mpl3115a2.h : Remove ifndef for I2C 2020-04-17 15:45:37 +05:30
Akshai M
c6f55b6f81 drivers/include/lpsxxx.h : Expose Parameters 
Add ifndef and Expose Compile Parameters to Doxyen

Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-04-17 15:45:19 +05:30
Benjamin Valentin
8a2a936726 drivers/at25xxx: return read/written bytes to match MTD API 
The MTD API expects read() to return the number of read bytes and
write() to return the number of written bytes.

So change the driver API to match that.
 2020-04-17 11:32:06 +02:00
Akshai M
f705b0e5af drivers/include/l3g4200d.h : Expose Parameters 
Add ifndef and Expose Compile Parameters to Doxyen
 2020-04-17 14:08:39 +05:30
Akshai M
e2b3175a1c drivers/include/isl29020.h : Expose Parameters 
Add ifndef and Expose Compile Parameters to Doxyen
 2020-04-17 14:07:58 +05:30
Akshai M
6757d97766 drivers/include/hts221.h : Remove ifndef for I2C 2020-04-17 14:07:58 +05:30
Akshai M
1e6c0e3935 drivers/include/ds1307.h : Remove ifndef for I2C 2020-04-17 14:07:58 +05:30
Akshai M
c59e17ea19 drivers/include/bmx055.h : Expose Parameters 
Add ifndef and Expose Compile Parameters to Doxyen
 2020-04-17 14:06:07 +05:30
Akshai M
79de2512e1 drivers/hdc1000 : Expose to Kconfig 
Expose Configurations to Kconfig

Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-04-16 19:16:43 +05:30
Akshai M
7a4191a8d5 drivers/hdc1000 : Add CONFIG_ 
Add CONFIG_ Prefix for configuring the Compile time macros
 2020-04-16 17:17:27 +05:30
Akshai M
c452323ab5 drivers/include/cc110x.h : Add group 
Add compile parameters to config_drivers_netdev group to Doxygen

Co-Authored-By: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 2020-04-15 13:58:31 +05:30
Akshai M
aa7e84a6d7 drivers/mma8x5x.h : Compile Configs 
Add CT Params to sensors group in Config for Doxygen
 2020-04-14 20:52:16 +05:30
Akshai M
b9f71610d7 drivers/include/ads101x.h : Add Group 
Add CT Params to sensors group in Config for Doxygen
 2020-04-14 20:52:16 +05:30
Akshai M
b36b3b9819 drivers/include/fxos8700.h : Add group 
Add compile parameters to config_drivers_sensors group to Doxygen
 2020-04-14 20:52:16 +05:30
Akshai M
32c4fe3cd4 drivers/include/ds1307.h : Add group 
Add compile parameters to config_drivers_sensors group to Doxygen
 2020-04-14 20:52:16 +05:30
Akshai M
eb3456ee1d drivers/include/dose.h : Add group 
Add compile parameters to config_drivers_netdev group to Doxygen
 2020-04-14 20:52:16 +05:30
Akshai M
11c2803bcf drivers/include/at86rf215.h : Add Group 
Add CT Params to netdev group in Config for Doxygen
 2020-04-14 20:52:16 +05:30
Akshai M
007cd5bb26 drivers/include/at.h : Add Group 
Add CT Params to misc group in Config for Doxygen
 2020-04-14 20:52:16 +05:30
Akshai M
358d7eb616 drivers/adcxx1c_params.h : Add Group 
Add CT Params to sensors group in Config for Doxygen
 2020-04-14 20:52:16 +05:30
Akshai M
497a967a23 drivers/include/sx127x.h : Add group 
Add to config_netdev group to Doxygen
 2020-04-14 20:52:16 +05:30
Akshai M
80c6374cc4 drivers/include/mrf24j40.h : Modify group 
Add to config_netdev group to Doxygen
 2020-04-14 20:52:16 +05:30
Akshai M
bc65ffdcde drivers/include/ethos.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
10d6b7a976 drivers/include/tmp00x.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
a6d7eab027 drivers/include/tcs37727.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
0ac93bfb07 drivers/include/sps30.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
462e321ec0 drivers/include/soft_spi.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
c63bdca3ab drivers/include/slipdev.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
4333a9f299 drivers/include/rn2xx3.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
1d3c2c4320 drivers/include/pn532.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
4c4c9f0c2b drivers/include/pir.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
f39b320b5d drivers/include/opt3001.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
4744401bb5 drivers/include/mtd_sdcard.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
2405ca3721 drivers/include/mpl3115a2.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
b812772e40 drivers/include/motor_driver.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
56cb11344b drivers/include/mag3110.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
5e2478b3c5 drivers/include/kw41zrf.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
4f31c40526 drivers/include/kw2xrf.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
dba177c8aa drivers/include/ili9341.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
013c161e1c drivers/include/hdc1000.h : Compile Configs 2020-04-14 20:52:16 +05:30
Akshai M
f15e479388 drivers/doc.txt : Add sub-groups 
Added Compile Config subgroups for sensors, netdev, actuators,
storage,soft_periph and misc to Doxygen
 2020-04-14 20:52:16 +05:30
Marian Buschsieweke
9efd47952e
drivers/ws281x: Extended doc 
Point out that automatic backend selection is performed, when no backend is
selected.
 2020-04-09 13:34:51 +02:00
Marian Buschsieweke
d3d2cdae8a
drivers/ws281x: Fix dependencies 
arch_esp32 was missing in FEATURES_REQUIRED_ANY for the ws281x, resulting in
ESP32 boards incorrectly being reported as unsupported.
 2020-04-09 13:30:18 +02:00
Marian Buschsieweke
4e60eb9dd5
Merge pull request #13843 from mtreffers/doc-fixes 
Doc: fix typo and extend ws281x documentation
 2020-04-09 13:21:45 +02:00
mtreffers
1ca28b8181 drivers/ws281x: fix documentation 
extend ws281x documentation with usage for ESP32 and VT100

fix indendation
 2020-04-09 10:22:39 +02:00
Francisco
3177784039
Merge pull request #13798 from jia200x/pr/at86rf2x_basic_mode 
at86rf2xx: implement basic mode (v2)
 2020-04-09 09:21:15 +02:00
Leandro Lanzieri
a06d9bbb66
Merge pull request #13315 from jia200x/pr/kconfig/ieee802154 
ieee802154: Expose configurations to Kconfig
 2020-04-08 19:34:55 +02:00
Jose Alamos
ab5418ebab at86rf2xx: report CRC error in basic mode 2020-04-08 19:14:45 +02:00
Jose Alamos
d4b0aff8cf at86rf2xx: implement basic mode 2020-04-08 19:14:45 +02:00
Jose Alamos
69eb3c7fe2 at86rf2xx: add basic mode PHY state 2020-04-08 19:14:44 +02:00
Jose Alamos
77325b4cde ieee802154: add CONFIG_ prefix to config macros 2020-04-08 19:08:25 +02:00
Leandro Lanzieri
6e49724a66
drivers/Makefile.dep: Set CONFIG_MRF24J40_USE_EXT_PA_LNA if not Kconfig 
For the mrf24j40 check if Kconfig is being used before setting the
configuration CFLAG.
 2020-04-08 18:49:32 +02:00
Leandro Lanzieri
f89514e466
drivers/mrf24j40: Expose configurations to Kconfig 2020-04-08 18:49:31 +02:00
Leandro Lanzieri
ede9117a1e
drivers/mrf24j40: Turn MRF24J40_USE_EXT_PA_LNA into bool config 
MRF24J40_USE_EXT_PA_LNA is moved to the 'CONFIG_' namespace and by
default is not set. Now it is checked in code using 'IS_ACTIVE'.
 2020-04-08 18:49:30 +02:00
Leandro Lanzieri
655ce69903
drivers/mrf24j40: Turn MRF24J40_TEST_SPI_CONNECTION into bool config 
MRF24J40_TEST_SPI_CONNECTION is moved to the 'CONFIG_' namespace and by
default is not set. Now it is checked in code using 'IS_ACTIVE'.
 2020-04-08 18:49:27 +02:00
Alexandre Abadie
067b324645
Merge pull request #11945 from benpicco/EEPROM-m95m01 
drivers: add driver for AT25xxx family of EEPROMs
 2020-04-07 13:19:21 +02:00
Benjamin Valentin
97fc2f2af1 drivers: add AT25xxx series EEPROM 
This adds a driver for the ST M95xxx series SPI EEPROMs.
The driver has been tested with the M95M01 EEPROM, but should
work with other chips from that family.

SPI-EEPROMs from other vendors from the families AT25xxx, 25AAxxx,
25LCxxx, CAT25xxx & BR25Sxxx should also in the same way.
 2020-04-07 12:31:46 +02:00
benpicco
750db2a910
Merge pull request #13788 from benpicco/drivers/at86rf215_shutdown_fix 
drivers/at86rf215: return error when switching state while busy
 2020-04-03 17:50:48 +02:00
Benjamin Valentin
46544c5d7a drivers/at86rf215: add comment to _tx_ongoing() 2020-04-03 12:48:52 +02:00
Francisco
d4580b4c36
Merge pull request #13750 from benpicco/drivers/at86rf215_fix_wakeup 
drivers/at86rf215: fix reset after deep sleep
 2020-04-03 09:04:51 +02:00
Leandro Lanzieri
c74544c9ec
Merge pull request #13349 from maribu/dependency-or 
build system: Restructure dependency resolution
 2020-04-02 10:40:44 +02:00
Benjamin Valentin
5ed88ecb0a drivers/at86rf215: unexport at86rf215_block_while_busy() 
It's a private function that should not be used lightly.
 2020-04-01 23:14:46 +02:00
Benjamin Valentin
8c6791b136 drivers/at86rf215: return error when switching state while busy 
Previously the function attempted to block here and manually service
the ISR.
This lead to unexpected results, in particular messages queuing up in
the threads message queue.

The result was that the radio would not end up in the correct state.
E.g. sending SLEEP to both interfaces while a transmission was ongoing
would lead to the interfaces waking up again.

With this patch the operation will just return -ERRNO so the caller can
try again.

To reproduce, try the attached patch for the `gnrc_networking` example:

On master you will find that the radio still consumes ~2.4mA after 'shutdown'.
(It is in fact in the state TRXOFF as it woke up again)
With this change the radio should consume less than 1µA (DEEP SLEEP).

diff --git a/examples/gnrc_networking/main.c b/examples/gnrc_networking/main.c
index 6301f4291d..93b96eb939 100644
--- a/examples/gnrc_networking/main.c
+++ b/examples/gnrc_networking/main.c
@@ -23,12 +23,47 @@
 #include "shell.h"
 #include "msg.h"

+#include "periph/pm.h"
+
+#include "net/netopt.h"
+#include "net/gnrc/netif.h"
+
 #define MAIN_QUEUE_SIZE     (8)
 static msg_t _main_msg_queue[MAIN_QUEUE_SIZE];

 extern int udp_cmd(int argc, char **argv);

+extern void send(char *addr_str, char *port_str, char *data, unsigned int num,
+                 unsigned int delay);
+
+static int send_and_shutdown(int argc, char **argv)
+{
+    (void) argc;
+    (void) argv;
+
+    /* the address must not exist */
+    char addr[] = "fe80::2068:3123:59f5:d238%7";
+    char port[] = "1234";
+    char data[] = "Hello World!";
+
+    send(addr, port, data, 1, 0);
+
+    /* disable radio */
+    gnrc_netif_t* netif = NULL;
+    netopt_state_t state = NETOPT_STATE_SLEEP;
+    while ((netif = gnrc_netif_iter(netif))) {
+        /* retry while busy */
+        while (gnrc_netapi_set(netif->pid, NETOPT_STATE, 0, &state,
+               sizeof(netopt_state_t)) == -EBUSY);
+    }
+
+    pm_set(0);
+
+    return 0;
+}
+
 static const shell_command_t shell_commands[] = {
+    { "shutdown", "turn off the radio & shut down", send_and_shutdown },
     { "udp", "send data over UDP and listen on UDP ports", udp_cmd },
     { NULL, NULL, NULL }
 };
diff --git a/examples/gnrc_networking/udp.c b/examples/gnrc_networking/udp.c
index e8a559846e..cb80855b76 100644
--- a/examples/gnrc_networking/udp.c
+++ b/examples/gnrc_networking/udp.c
@@ -36,7 +36,7 @@ static gnrc_netreg_entry_t server = GNRC_NETREG_ENTRY_INIT_PID(GNRC_NETREG_DEMUX
                                                                KERNEL_PID_UNDEF);

-static void send(char *addr_str, char *port_str, char *data, unsigned int num,
+void send(char *addr_str, char *port_str, char *data, unsigned int num,
                  unsigned int delay)
 {
     gnrc_netif_t *netif = NULL;
 2020-04-01 23:08:44 +02:00
benpicco
660b1a9b5f
Merge pull request #10083 from gschorcht/drivers_hmc5883l 
drivers: add driver for Honeywell HMC5883L magnetometer
 2020-04-01 14:49:34 +02:00
benpicco
d1ccfe6c9a
Merge pull request #13778 from akshaim/fxos8700_CT_Config 
drivers/include/fxos8700.h : Compile Configs
 2020-04-01 13:43:01 +02:00
Gunar Schorcht
df612a3790 sys/auto_init: add hmc5883l device driver 2020-04-01 13:37:22 +02:00
Gunar Schorcht
e6090adb3f drivers: add hmc5883l device driver 2020-04-01 13:37:22 +02:00
Leandro Lanzieri
6f30086609
Merge pull request #13775 from akshaim/ds1307_CT_Config 
drivers/include/ds1307.h : Compile Configs
 2020-04-01 13:28:36 +02:00
Leandro Lanzieri
bb6fa878a2
Merge pull request #13770 from akshaim/dose_CT_Config 
drivers/include/dose.h : Compile Configs
 2020-04-01 13:10:01 +02:00
Akshai M
27458701b6 drivers/include/fxos8700.h : Compile Configs 2020-04-01 14:53:44 +05:30
Akshai M
5e97feb88e drivers/include/dose.h : Compile Configs 2020-04-01 14:35:45 +05:30
Akshai M
c94abb5a36 drivers/include/ds1307.h : Compile Configs 2020-04-01 13:42:45 +05:30
Akshai M
9e3ea3e7b6 drivers/include/ads101x.h: Tagged Compile Time Parameters 2020-04-01 12:50:02 +05:30
Marian Buschsieweke
007ac492ff
drivers/ws281x: Use FEATURES_REQUIRED_ANY 2020-04-01 09:12:50 +02:00
Benjamin Valentin
1ed125dc06 drivers/at86rf215: document AT86RF215_TRIM_VAL 
There is a compile-time configurable TRIM value.
This adds documentation for it.
 2020-03-31 22:54:53 +02:00
benpicco
baa2024241
Merge pull request #13766 from akshaim/at_CT_Config 
drivers/include/at.h : Tagged Compile Time Configurations
 2020-03-31 21:51:44 +02:00
Akshai M
769fd0840c drivers/include/at86rf215.h: Tagged Compile Time Configuration 2020-03-31 22:20:02 +05:30
Akshai M
df9814df12 drivers/include/at.h : Tagged Compile Time Configurations 2020-03-31 21:45:16 +05:30
Francisco
1a8b35f54b
Merge pull request #13377 from leandrolanzieri/pr/kconfig_migrate/drivers/periph_wdt 
drivers/periph/wdt: Expose configurations to Kconfig
 2020-03-31 16:36:36 +02:00
benpicco
e7c1605119
Merge pull request #13691 from benpicco/tests/driver_netdev_common 
tests/driver_netdev_common: add compile-test for network drivers
 2020-03-31 14:50:28 +02:00
Leandro Lanzieri
8cca9bfc28
drivers/wdt: Expose configuration to Kconfig 2020-03-31 13:39:38 +02:00
Leandro Lanzieri
00b71a2708
drivers/wdt: Move WDT_WARNING_PERIOD to 'CONFIG_' namespace 2020-03-31 13:39:37 +02:00
Benjamin Valentin
611f4161d6 drivers/at86rf215: fix reset after deep sleep 
When the radio is in DEEP SLEEP, reading the state register will return 0.
This makes the reset routine abort early even though the device is connected
and still waking up.

Instead, just add a timeout to the polling of the WAKEUP IRQ bit.
In practise it has shown that the loop will be taken two times on 'normal'
reset and four times when the radio was in DEEP SLEEP.

Polling 255 times sure does not hurt.

To reproduce the issue, put both interfaces into SLEEP mode,
then reboot the module:

    ifconfig 7 set state sleep
    ifconfig 8 set state sleep
    reboot
 2020-03-29 19:44:40 +02:00
Akshai M
58516f7e2a drivers/include/sx127x.h: Tagged Compile Time Configuration 2020-03-27 19:06:10 +05:30
Martine S. Lenders
62d48d5bf3
gnrc_netif: document new *_create() out parameter as such 2020-03-26 14:37:44 +01:00
Martine Lenders
061eb88c05
Merge pull request #12994 from jia200x/pr/gnrc_netif_desc_alloc 
gnrc_netif: implementation of dynamic GNRC_NETIF_NUMOF approach
 2020-03-26 14:30:44 +01:00
Jose Alamos
67ed9defbe gnrc_netif_xxx_create: use external netif allocation 2020-03-26 11:12:23 +01:00
Marian Buschsieweke
937361856d
Merge pull request #13702 from ccoors/feature/esp32-ws281x 
drivers/ws281x: Add support for esp32
 2020-03-25 21:39:40 +01:00
Christian Friedrich Coors
08703766fc drivers/ws281x: Add ESP32 support 2020-03-25 17:25:35 +01:00
Dylan Laduranty
c4a8c63002
Merge pull request #13693 from benpicco/boards/same54-xpro-ext 
boards/same54-xpro: configure remaining EXT connectors
 2020-03-25 14:08:13 +01:00
Francisco Molina
9fa0099d62
cpu/stm32wb: add flashpage support 
- Since flash access is shared with CPU2 we resize ROM_LEN
  according to CPU2 secure flash memmory area.
- Add assert to prevent unauthorized reads from CPU2 secure
  flash area
 2020-03-25 09:29:56 +01:00
Alexandre Abadie
6faae9a9c9
Merge pull request #13657 from aabadie/pr/boards/backlight_common_defines 
boards/pinetime: add defines for controlling the backlight pin
 2020-03-24 13:52:57 +01:00
Alexandre Abadie
1498a7ada2
drivers/disp_dev: add help functions for backlight 2020-03-24 12:02:50 +01:00
Gunar Schorcht
4d306a4636 drivers/sht3x: fix broken links 2020-03-24 10:38:40 +01:00
Gunar Schorcht
3542c7af0e drivers/sdcard_spi: fix broken links 2020-03-24 10:38:40 +01:00
Gunar Schorcht
1d79de0c92 drivers/ccs811: fix broken links 2020-03-24 10:38:40 +01:00
Benjamin Valentin
f673e275f3 drivers/at86rf215: adapt default config to same54-xpro EXT1 
Previously the default config was for connecting the REB215-XPRO
module to EXT3 on same54-xpro.

Since now more SPI buses are configured on same54-xpro and the default
config also serves as a compile test for boards with only one SPI bus,
connect the module to the (new) first SPI bus by default.
 2020-03-24 01:16:47 +01:00
Benjamin Valentin
c4f248d51c drivers/dose: fix declaration of signal() 2020-03-23 20:35:54 +01:00
benpicco
e725111562
Merge pull request #13656 from gschorcht/drivers/apds9xx_fix_wait_long_init 
drivers/apd99xx: fix wait long initialization
 2020-03-22 17:26:22 +01:00
Francisco
cdbf0b2d69
Merge pull request #13583 from benpicco/at86rf215-minimal 
drivers/at86rf215: add basic support for AT86RF215 dual-band radio
 2020-03-20 09:33:50 +01:00
benpicco
5435792034
Merge pull request #12277 from benemorius/pr/kw41zrf 
drivers: add kw41zrf
 2020-03-20 00:49:56 +01:00
Joakim Nohlgård
5bd67d88a8 drivers/kw41zrf: Transceiver driver for the KW41Z radio 
This is the radio found in NXP Kinetis KW41Z, KW21Z. Only 802.15.4 mode
is implemented (KW41Z also supports BLE on the same transceiver).

The driver uses vendor supplied initialization code for the low level
XCVR hardware, these files were imported from KSDK 2.2.0 (framework_5.3.5)
 2020-03-19 17:00:04 -05:00
Benjamin Valentin
d716195ecb drivers/periph_common: init RTT before RTC 2020-03-19 15:25:14 +01:00
Benjamin Valentin
60cc3b8757 periph/rtt: Allow using MOCK_RTT defines from Unit Test 2020-03-19 15:25:14 +01:00
Benjamin Valentin
cd2b86c4b1 rtt_rtc: add RTT based RTC implementation 2020-03-19 15:25:14 +01:00
Benjamin Valentin
d35511bee7 drivers/at86rf215: Add basic driver for the AT86RF215 radio 
This adds a driver for the SPI based AT86RF215 transceiver.
The chip supports the IEEE Std 802.15.4-2015 and IEEE Std 802.15.4g-2012 standard.

This driver supports two versions of the chip:
    - AT86RF215:  dual sub-GHz & 2.4 GHz radio & baseband
    - AT86RF215M: sub-GHz radio & baseband only

Both radios support the following PHY modes:
    - MR-FSK
    - MR-OFDM
    - MR-O-QPKS
    - O-QPSK (legacy)

The driver currently only implements support for legacy O-QPSK.

To use both interfaces, add

    GNRC_NETIF_NUMOF := 2

to your Makefile.

The transceiver is able to send frames of up to 2047 bytes according to
IEEE 802.15.4g-2012 when operating in non-legacy mode.

Known issues:

 - [ ] dBm setting values are bogus
 - [ ] Channel spacing for sub-GHz MR-O-QPSK might be wrong
 - [ ] TX/RX stress test will lock up the driver on openmote-b
 2020-03-19 14:39:18 +01:00
Gunar Schorcht
2581fdee66 drivers/apd99xx: fix wait long initialization 2020-03-19 10:26:30 +01:00
Martine Lenders
5defa1ae34
Merge pull request #13466 from gschorcht/fix_compilation_with_ndebug 
tests: fix compilation problems with NDEBUG
 2020-03-12 19:34:33 +01:00
Gunar Schorcht
bd658b02ae drivers/mtd_mapper: fix NDEBUG compile problem 2020-03-12 18:04:42 +01:00
Robert Hartung
dc6665d5cf
Merge pull request #12717 from dylad/pr/bme680_pkg_driver 
driver/bme680: add I2C/SPI driver for BME680 device
 2020-03-12 14:00:40 +01:00
benpicco
24477ae3cb
Merge pull request #13588 from maribu/cc110x-isr 
drivers/cc110x: Handle lost IRQs more gracefully
 2020-03-12 12:21:07 +01:00
Gunar Schorcht
a1e2f36adb drivers/saul: add auto_init for BME680 2020-03-12 08:52:10 +01:00
Gunar Schorcht
c4325e4d5e drivers/bme680: add SAUL capabilities 2020-03-12 08:52:10 +01:00
Gunar Schorcht
1118f80180 drivers/saul: add common gas class 2020-03-12 08:42:59 +01:00
Gunar Schorcht
9dd11eb188 drivers: add support for BME680 driver 
Add the support for BME680 based on the BME680 vendor driver package.
 2020-03-12 08:42:59 +01:00
Schorcht
811850bba7 sys/auto_init: add APDS99XX ALS and proximity 2020-03-11 14:21:47 +01:00
Schorcht
7548a6e849 drivers: add APDS99XX ALS and proximity 2020-03-11 14:21:47 +01:00
Gunar Schorcht
87021a0b18 drivers/sy127x: clear interrupts for DIO3 
If ValidHeader interrupt is set, it triggers DIO3 interrupt. However, if DIO3 line is not connected, ValidHeader interrupt is still set in RegIrqFlags register when RxDone interrupt is triggered on DIO0. It sets the mode back to idle. Therefore, the _on_dio3_irq does not clear the ValidHeader interrupt flag.
 2020-03-10 10:47:36 +01:00
Gunar Schorcht
56040e3369 driver/sx127x: allow the use of DIO0 for CAD_DONE 2020-03-10 10:08:30 +01:00
Gunar Schorcht
e3a82cd6fc driver/sx127x: set DIO1 mapping 
Since the RxTimeout interrupt is enabled, DIO1 mapping should be set also to RxTimeout in case the driver is extended in future and DIO1 mapping is changed for any reason.
 2020-03-10 10:08:24 +01:00
Gunar Schorcht
1eb8701965 drivers/sx127x: ensure that DIO2 is defined 
If frequency hopping is used (LORA_FREQUENCY_HOPPING_DEFAULT = true), DIO2 pin is needed for the FhssChangeChannel interrupt to get it working.
 2020-03-10 10:08:19 +01:00
Gunar Schorcht
3adbbdcf9b drivers/sx127x: fix length check of netstat_opt_tin _set 2020-03-08 17:10:46 +01:00
Marian Buschsieweke
02a425f114
drivers/cc110x: Handle lost IRQs more gracefully 
When an IRQ is lost during cc110x_send(), the driver will remain locked until
another IRQ is triggered. This commit changes the behavior to wait for at most
an reasonable upper bound, which is chosen to not only allow the driver to
recover but also (at least in theory) complete the transmission correctly.
 2020-03-08 12:49:57 +01:00
Kaspar Schleiser
57985806c1
Merge pull request #13562 from jia200x/pr/netdev_irq_end 
netdev: add netdev_trigger_event_isr() function
 2020-03-06 15:37:24 +01:00
Jose Alamos
3ad574a822 drivers/netdev: use netdev_trigger_event_isr function 2020-03-06 14:03:43 +01:00
Jose Alamos
67bc0e13af netdev: add netdev_trigger_event_isr function 2020-03-06 14:02:40 +01:00
benpicco
7877ffdf2a
Merge pull request #13511 from fjmolinas/pr_auto_init_periph 
drivers/periph_common: add periph_init% modules
 2020-03-06 13:05:57 +01:00
Francisco Molina
6b6479e6e9
drivers/periph_common: add periph_init% module 2020-03-06 11:21:19 +01:00
Martine Lenders
ff425576a0
slipdev_stdio: provide stdio multiplexing over SLIP 2020-03-06 08:58:45 +01:00
Martine Lenders
8e827055f0
slipmux: remove inesc member 
It's not needed anymore.
 2020-03-06 08:58:45 +01:00
Martine Lenders
f11940973c
slipdev: internally expose byte stuffing functionality 2020-03-06 08:58:45 +01:00
Martine Lenders
79e80d4fec
slipdev: expose marker byte definitions 2020-03-06 08:56:40 +01:00
Martine Lenders
23f6cf8a37
slipdev: provide default configuration 2020-03-05 18:17:01 +01:00
benpicco
7af046d740
Merge pull request #13548 from benpicco/sys/auto_init/netif-manual 
sys/auto_init: allow delayed initialisation of SAUL & gnrc_netif
 2020-03-05 17:05:02 +01:00
Jan Mohr
aa5ffe5a6d drivers/lis2dh12: added interrupt function 2020-03-04 17:01:58 +01:00
Benjamin Valentin
521b1ce440 sys/auto_init: allow delayed initialisation of SAUL 
Co-authored-by: Martine S. Lenders <m.lenders@fu-berlin.de>
 2020-03-04 16:13:40 +01:00
Kaspar Schleiser
1298ae828a
Merge pull request #13202 from bergzand/pr/mtd/mapper 
MTD: Add module for remapping MTD sectors
 2020-03-04 11:51:39 +01:00
Koen Zandberg
9a430cd682
mtd: add module for remapping MTD sectors 2020-03-04 10:47:50 +01:00
Benjamin Valentin
725311a054 periph_common/rtc: add rtc_tm_valid() 
Add a function to verify all members of a struct tm are within
the valid range.
 2020-03-03 16:26:14 +01:00
Gunar Schorcht
9e372104f0
Merge pull request #13284 from benpicco/rtc_mktime 
periph_common/rtc: add rtc_mktime() & rtc_localtime() helper functions for RTC implementations
 2020-03-03 14:12:50 +01:00
Alexandre Abadie
b050608771
Merge pull request #13262 from aabadie/pr/sys/disp_dev 
sys/disp_dev: add generic interface for display drivers
 2020-03-03 13:25:45 +01:00
Kaspar Schleiser
d13d1aed48
Merge pull request #13336 from bergzand/pr/mtd_spi_nor/erase_timings_in_struct 
mtd_spi_nor: erase timings in struct
 2020-03-03 11:59:28 +01:00
Benjamin Valentin
5b64ae4ef5 periph_common/rtc: add rtc_localtime() 
Add function to convert a RTC timestamp (non-UNIX) to a time struct.
 2020-03-03 11:01:02 +01:00
Alexandre Abadie
acfac5d32d
drivers/ili9341: provide adaption to disp_dev interface 2020-03-03 10:25:55 +01:00
Alexandre Abadie
ac6d0b9077
sys: add interface for generic display device 2020-03-03 10:25:54 +01:00
Koen Zandberg
dc04b86d1b
mtd_spi_nor: Add wait timings to parameters 2020-03-03 09:49:00 +01:00
Benjamin Valentin
fbada0df58 periph_common/rtc: handle m_mday == 0 in rtc_tm_normalize() 2020-02-29 17:42:50 +01:00
Benjamin Valentin
becff61e20 periph_common/rtc: add rtc_mktime() 
Add a function to convert a time struct to an unsigned timestamp (non-UNIX).
 2020-02-29 17:42:50 +01:00
Benjamin Valentin
743471362e drivers/ds18: fix doxygen group of ds18_internal.h 2020-02-27 17:43:53 +01:00
benpicco
50a5845b15
Merge pull request #13037 from benpicco/lpc23xx_i2c 
cpu/lpc2387: implement periph/i2c
 2020-02-27 09:58:34 +01:00
Gunar Schorcht
a27e77cfb3 drivers/at24mac: fix grouping in doc 2020-02-27 08:46:40 +01:00
Gunar Schorcht
dfae4fbb27 drivers/bmx280: remove line break in defgroup 
defgroup command must not contain a line break.
 2020-02-27 08:43:21 +01:00
Gunar Schorcht
2bbc02a6e0 drivers/sps30: brief documentation added 2020-02-27 08:43:21 +01:00
Gunar Schorcht
a9a9745ffd drivers/at: change grouping in doc 2020-02-27 08:43:21 +01:00
Gunar Schorcht
4c210b7b2f drivers/at24xxx: fix grouping in doc 2020-02-27 08:43:21 +01:00
Gunar Schorcht
918b3517a7 doc: create a category for miscellaneous drivers 
A documentation category for drivers that do not fit in any other driver category is added.
 2020-02-27 08:43:21 +01:00
Benjamin Valentin
00131bb745 drivers/at24mac: include kernel_defines.h 
We need that header file for the ARRAY_SIZE() macro.
 2020-02-26 23:41:38 +01:00
Kaspar Schleiser
2dcf65d942
Merge pull request #13332 from bergzand/pr/mtd_spi_nor/params_struct 
mtd_spi_nor: Move const params to separate struct
 2020-02-26 09:43:18 +01:00
Alexandre Abadie
2b713f13cb
drivers/srf08: refactor driver configuration 2020-02-25 21:24:02 +01:00