Leandro Lanzieri
d25fc243c4
treewide: change prefix for generated Kconfig symbols.
...
This changes the prefixes of the symbols generated from USEMODULE and
USEPKG variables. The changes are as follow:
KCONFIG_MODULE_ => KCONFIG_USEMODULE_
KCONFIG_PKG_ => KCONFIG_USEPKG_
MODULE_ => USEMODULE_
PKG_ => USEPKG_
2020-08-31 09:37:09 +02:00
Benjamin Valentin
f0e77840dc
cpu/nrf52: spi_twi_irq add workaround for nRF52810 vendor file
...
Either nRF52810 should define SPIM_COUNT 2 or nRF52805 should
define SPIM_COUNT 1.
But as it nRF52805 defines SPIM_COUNT 2 and nRF52810 defines SPIM_COUNT 1
even though both have a single SPI and a single, separate TWI peripheral.
Re-define SPIM_COUNT to 2 on nRF52810 as this is the easiest solution.
2020-08-16 23:26:17 +02:00
Benjamin Valentin
5ecf2e8bb1
cpu/nrf52: ensure PWM is present
...
Not all members of the family have a PWM peripheral
2020-08-16 23:26:17 +02:00
Benjamin Valentin
899e97af30
cpu/nrf52: add definitions for remaining family members
2020-08-16 23:26:17 +02:00
Benjamin Valentin
91ad431e34
cpu/nrf52: fix nrf52811 vector definition
...
SWI2 was missing - compare with vendor/nrf52811.h
2020-08-09 21:46:06 +02:00
Benjamin Valentin
4980cb7abe
cpu/nrf52: fix nrf52832 vector definition
...
The CPU has 39 interrupt vectors and the FPU interrupt is the last one.
(Yes this MCU has an FPU).
Compare with vendor/nrf52.h
2020-08-09 21:46:06 +02:00
Benjamin Valentin
3f8bb169c6
cpu/nrf52: fix nrf52840 vector definition
...
The CPU has 48 interrupt vectors and spi3 is the last one.
See vendor/nrf52840.h
2020-08-09 21:46:06 +02:00
Benjamin Valentin
ec67798cf0
cpu/nrf52: fix spi_twi_irq for nrf52805/10/11
...
These smaller parts have SPI1 mapped to TWI0 (if SPI1 exists at all).
2020-08-09 21:46:06 +02:00
Benjamin Valentin
ca2b7e1952
cpu/nrf5x_common: UART: capture whole nrf52 lineup
2020-08-09 21:46:06 +02:00
Benjamin Valentin
2f236cb092
cpu/nrf52: only enable instruction cache if available
...
The instruction cache is not available on all nrf52 MCUs.
2020-08-09 21:46:06 +02:00
Benjamin Valentin
ea2638dcac
cpu/nrf52: split up vector definition
...
The interrupt vectors vary between each member of the family.
To retain sanity, split the vectors file up for each MCU.
2020-08-09 21:46:06 +02:00
Benjamin Valentin
307495985a
cpu/nrf52: not all parts have a FPU
2020-08-09 21:46:06 +02:00
Benjamin Valentin
7a9e68af96
cpu/nrf52: add vendor files for nrf52805/10/20/33
2020-08-09 21:46:06 +02:00
Jose Alamos
5c824f6f12
nrf802154: fix set_tx_power function
2020-07-31 17:16:10 +02:00
Leandro Lanzieri
6a9c28aa72
cpu/nrf52: Add Kconfig symbols
2020-07-16 10:23:49 +02:00
Leandro Lanzieri
4d65bc8e0a
cpu: Rename CPU_ARCH to CPU_CORE
2020-06-16 12:05:40 +02:00
83a6ad182d
nrf52/i2c: Use mutex and IRQ for blocking
...
This commit enhances the I2C code of the nRF52 family to block on a
mutex while the I2C transfer is busy. The mutex is unlocked in the ISR
when it is trigger by either a stop condition or an error condition.
2020-06-02 10:24:40 +02:00
b15c4ef418
Merge pull request #14069 from benpicco/cpu/nrf52-cleanup
...
cpu/nrf52: update & fix vendor files, derive flash settings
2020-05-19 10:55:50 +02:00
720ccad7dd
nrf52: Add EasyDMA-based SPI periph driver
2020-05-18 19:16:17 +02:00
1139c0737f
nrf52: add common SPI/I2C IRQ code
2020-05-18 19:14:56 +02:00
Benjamin Valentin
bdf40d5ffa
cpu/nrf52: fix NRF52811 vendor file
...
That `system_nrf52811.h` include must be removed.
2020-05-16 19:22:14 +02:00
Benjamin Valentin
d8a5f87aee
cpu/nrf52: update vendor files
2020-05-16 19:21:56 +02:00
Benjamin Valentin
d34551e8da
cpu/nrf52: use vendor defines for flash size
...
We don't need to define FLASHPAGE_SIZE and FLASHPAGE_NUMOF ourself if
the BPROT peripheral is present.
Now why nrf52840 doesn't have it, I don't know, but for nrf52832 and
nrf23811 the values in BPROT_REGIONS_SIZE and BPROT_REGIONS_NUM match
the values manually provided here before.
2020-05-12 18:10:15 +02:00
Benjamin Valentin
20a044c956
cpu/nrf52: fix nrf52811 interrupt vector table
...
SPI1 and TWI0 share the same IRQ, not SPI1 and TWI1
2020-05-12 15:10:06 +02:00
Benjamin Valentin
d53bc7bf73
cpu/nrf52: add peripherals.h vendor files
...
Those make our lives much easier.
2020-05-12 14:52:06 +02:00
Benjamin Valentin
fb2f2c456f
cpu/nrf52: add nrf52811 vendor files
2020-05-12 14:49:26 +02:00
Philipp Blum
35dcf637f2
cpu/nrf52: add support for nrf52811
2020-05-10 17:10:33 +02:00
Akshai M
642fe16807
cpu/nrf52/include/nrf802154.h : Add Group
...
Add CT Params to netdev group in Config for Doxygen
2020-04-14 20:52:16 +05:30
Jose Alamos
77325b4cde
ieee802154: add CONFIG_ prefix to config macros
2020-04-08 19:08:25 +02:00
Leandro Lanzieri
64552a3b9a
cpu/cortexm_common: Move common modules to Makefile.dep
...
This moves the following modules to a architecture-specific Makefile.dep
file:
- cortexm_common
- cortexm_common_periph
- newlib
- newlib_nano
- periph
2020-04-01 09:46:21 +02:00
fc6b586919
Merge pull request #13586 from bergzand/pr/nrf/dcdc
...
nrf5x: Add and enable configuration for the built-in DC/DC converter
2020-03-24 11:56:40 +01:00
Dylan Laduranty
0b15db3694
cpu/nrf5x: use generic hw fc module
2020-03-10 14:47:19 +01:00
64f04e4da9
nrf5x: Add built-in DC/DC converter enable function
...
The internal DC/DC converter is more efficient compared to the LDO
regulator. The downside of the DC/DC converter is that it requires an
external inductor to be present on the board. Enabling the DC/DC
converter is guarded with NRF5X_ENABLE_DCDC, this macro must be defined
if the DC/DC converter is to be enabled.
2020-03-07 17:37:40 +01:00
Jose Alamos
3ad574a822
drivers/netdev: use netdev_trigger_event_isr function
2020-03-06 14:03:43 +01:00
68ec8b2c2b
Merge pull request #13391 from kaspar030/mpu_feature
...
cpu/cortex-m: turn MPU support into a feature
2020-03-04 07:09:40 +01:00
a3c527fdbc
cpu/*: add cortex_mpu to known-to-support CPU families
2020-03-03 22:59:41 +01:00
f568162f9b
cpu/nrf5x: provide specific gpio_t definition
2020-02-19 19:16:58 +01:00
d7c0102115
cpu/cortexm: move CPU_ARCH/FAM to Makefile.features
2020-02-17 16:02:48 +01:00
Karl Fessel
4445faaa3a
core/shed: remove not needed bitarithm include add missing
...
bitarithm.h is not needed for the interface of shed but may cause conflicts
due to different definitions of SETBIT and CLRBIT
common implementations are: (value, offset) xor (value, mask) bitarithm
implements the later
frac.c and nrf52/usbdev.c use bitarithm.h but where missing the include
sam0/rtt.c defined a bit using mask from bitarithm,
changed that to the soulution used in sam0/rtc.c
2020-02-05 12:45:29 +01:00
Martine Lenders
8d749dc024
Merge pull request #13148 from chrysn-pull-requests/usb-default-vidpid
...
USB: Use default VID/PID for RIOT-included peripherals
2020-01-30 17:37:52 +01:00
chrysn
e65f3f372b
USB VID/PID: Set whitelist define for internals that use usb.h
...
This list is probably incomplete as it was created experimentally.
2020-01-30 15:04:10 +01:00
66d903c209
cpu/nrf5x: move dependencies to Makefile.dep
2020-01-28 13:18:39 +01:00
Jose Alamos
709c1aac30
Kconfig: Expose NRF802154 configurations
2020-01-21 11:29:00 +01:00
Jose Alamos
f652564eb1
nrf802154: implement CCA
2020-01-21 11:06:20 +01:00
Jose Alamos
09c79f07e7
nrf802154: use correct ED_RSSIOFFS sign
2020-01-21 11:06:20 +01:00
Marian Buschsieweke
186d2ccfa4
cpu/nrf52/periph: adc_sample() now returns int32_t
2020-01-10 14:13:15 +01:00
c8d1d6b3f3
cpu/nrf52: fix typos
2019-11-23 22:39:36 +01:00
Francois Berder
4a31f94cfc
many typo fixes
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2019-11-23 22:39:07 +01:00
Yegor Yefremov
df7e760588
doxygen/I2C: don't include overridden typedefs
...
Add missing #ifndefs to overridden I2C typedefs.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-11-15 10:35:33 +01:00
Yegor Yefremov
5b0252b150
doxygen/ADC: don't include overridden typedefs
...
Add missing #ifndefs to overridden ADC resolution typedefs.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-11-15 10:35:32 +01:00
