edeffdcd54
suit: Adapt manifest handling to use common storage backend
2020-09-30 14:32:27 +02:00
Jose Alamos
fda73fdf0a
gnrc_lorawan: uncrustify files
2020-09-30 14:18:54 +02:00
Jose Alamos
71bda3bcd8
gnrc_lorawan: remove GNRC specific dependencies
2020-09-30 14:18:54 +02:00
Jose Alamos
0162a16d82
gnrc_lorawan: fix BUSY logic
2020-09-30 14:18:54 +02:00
Jose Alamos
2e6ba90435
gnrc_lorawan: refactor rx_done callback
2020-09-30 14:18:54 +02:00
Jose Alamos
5146261f03
gnrc_lorawan: rename radio event functions
2020-09-30 14:18:54 +02:00
Benjamin Valentin
33f49183d9
cpu/nrf5x_common: UART: add support for 1 MBaud
...
`UART_BAUDRATE_BAUDRATE_Baud1M` is defined in the vendor files, so
make it available to the user.
2020-09-30 13:42:59 +02:00
a29eaf557f
suit/storage/flashwrite: Add riotboot flashwrite storage backend
2020-09-30 13:32:39 +02:00
9ce2ba1c55
suit/storage/ram: Introduce RAM storage backend for SUIT
2020-09-30 13:32:38 +02:00
7742750abd
suit: Introduce generic storage backend
...
This commit introduces a common storage backend for SUIT manifest
payloads. Different backends can be compiled into a single firmware.
Degending on the component name in the SUIT manifest, a storage backend
is selected by the parser.
2020-09-30 13:32:38 +02:00
chrysn
2053a1785a
cpu/nrf52: Ensure that uninitialized PWM outputs are disabled
2020-09-30 13:16:59 +02:00
chrysn
65d4c88be8
cpu/nrf52: Warn against implicit 0 in PWM channels
...
Working with less-than-full PWMs has shown that a warning is indicated
here, as just missing an item would result in inadvertently driving
P0.00.
2020-09-30 13:15:18 +02:00
chrysn
8dd60286a7
cpu/nrf52: Fix PWM generation if <4 channels are used
...
The PWM decodeer, in LOAD=Single mode, loads data in groups of 4
half-words. Previously, if any channel was not connected to a pin (a
connection that's immaterial to the loader), a smaller number would be
given resulting in the decoder not loading anything at all.
See-Also: https://infocenter.nordicsemi.com/pdf/nRF52840_PS_v1.1.pdf#page=256
2020-09-30 13:14:47 +02:00
chrysn
65e63ffbbb
cpu/nrf52: Don't touch pin modes on PWM startup
...
Once PWM is running, the active PWM module overrides the PIN_CNF state;
only when PWM is stopped the pin returns into its PIN_CNF state (which,
then, the board may set to whatever idle means there).
(Moreover, the code there only worked for P0 registers, not eg. the
P1.09 of the nrf52840dongle's RGB LED).
2020-09-30 13:14:47 +02:00
d59fd84bff
tests: blacklist mtd using tests for esp32-wroom-32
2020-09-30 13:02:31 +02:00
Vincent Dupont
590f07b38a
stm32/can: fix features dependency
2020-09-30 12:59:03 +02:00
Vincent Dupont
c498bbdc83
esp32/can: include can_esp.h from periph_cpu.h
2020-09-30 12:59:03 +02:00
Vincent Dupont
e2fa5bcb7c
tests/candev: adapt to use periph_can
...
This makes tests/candev use periph_can by default instead of old native
specific driver.
2020-09-30 12:59:03 +02:00
Vincent Dupont
b4f29035ce
native/can: fix CAN init
...
Native CAN device was not properly ported to periph_can interface.
This commit fixes this by renaming all needed structures and files so
auto_init_can can initialize the native device. FEATURES_PROVIDED is
also updated for native.
2020-09-30 12:59:03 +02:00
Vincent Dupont
98c39d5104
can: add proper checks for ifnum validity
...
Most functions were using asserts, but in some cases it might not be a
programmatic error to pass an invalid ifnum. This makes sure the code
does not crash by testing it at runtim and returning an error.
2020-09-30 12:59:02 +02:00
benpicco
329a65fb3b
Merge pull request #15122 from benpicco/boards/common/nrf52xxxdk-led_pwm
...
boards/common/nrf52xxxdk: configure LEDs as PWM
2020-09-30 11:28:06 +02:00
Benjamin Valentin
307ea6224a
net/eui48: add eui64_to_eui48()
...
Provide helper function to mangle a EUI-64 into an EUI-48.
This can be useful to get predictable, locally unique addreses.
2020-09-30 11:18:36 +02:00
Benjamin Valentin
d7943a49aa
net/eui48: reorder code
...
Move eui48_set_local() and eui48_clear_group() to the top so we can
use it later in the file.
2020-09-30 11:18:34 +02:00
benpicco
0bc80250cf
Merge pull request #15101 from benpicco/sys/net/uhcp-log
...
sys/net/uhcp: use LOG_xxx functions
2020-09-30 11:08:53 +02:00
40262c1b7a
cpu/stm32: reorganize Kconfig files per families
2020-09-30 10:31:38 +02:00
1e6a336227
cpu/stm32/Kconfig: move features declared in models to lines
2020-09-30 10:31:29 +02:00
8738bd5e5c
cpu/stm32: select lines from models in Kconfig
2020-09-30 10:31:29 +02:00
d1bab4a25f
cpu/stm32: add Kconfig config for all cpu lines
2020-09-30 10:31:29 +02:00
ba4edb3c63
cpu/stm32: split main Kconfig
2020-09-30 10:31:29 +02:00
e8c79e7a41
cpu/stm32: extend CPU_LINES for G4 and L1
2020-09-30 10:31:29 +02:00
cada451383
cpu/stm32: document info extracted from CPU model name
2020-09-30 10:31:28 +02:00
2dab6c7b30
Merge pull request #15111 from maribu/xtimer-assert
...
sys/{x,z}timer: assert() successful initialization of periph_timer
2020-09-30 08:52:34 +02:00
aa6e64316c
Merge pull request #15053 from kaspar030/ztimer_periodic
...
sys/ztimer: add periodic timers API
2020-09-29 23:58:51 +02:00
7b30777429
tests/ztimer_periodic: initial commit
2020-09-29 23:04:39 +02:00
548c4f02fc
sys/ztimer: add ztimer_periodic
2020-09-29 23:04:39 +02:00
Benjamin Valentin
8361a273ca
boards/common/nrf52xxxdk: configure LEDs as PWM
...
The 'common' pwm pins don't make sense for every board.
Use the LED pin defines instead as a sensible PWM default.
2020-09-29 21:58:37 +02:00
benpicco
bd7a9fe330
Merge pull request #15115 from chrysn-pull-requests/nrf52840-pwm
...
boards/nrf52840dongle: Configure PWM to drive the LEDs
2020-09-29 21:21:47 +02:00
Marian Buschsieweke
a206df5399
Merge pull request #15104 from maribu/platform
...
sys/architecture: New module to access architecture internals in platform-independent way
2020-09-29 18:12:34 +02:00
bcbe3ac1d5
Merge pull request #15114 from aabadie/pr/boards/stm32f0_apb2_clock_fix
...
boards/stm32f0: fix missing CLOCK_APB2 define
2020-09-29 17:37:19 +02:00
d407878bc5
Merge pull request #15112 from aabadie/pr/boards/nucleo64-g431kb
...
boards/nucleo-g431rb: add initial support
2020-09-29 15:26:39 +02:00
ea007ada05
suit: Mark conversion function arguments as const
...
Small cleanup to mark arguments of the conversion functions for param to
cbor and vice versa as const where possible
2020-09-29 15:18:57 +02:00
8159819087
tools/suit: Add optional component ID argument
...
This extends the component argument of the gen_manifest.py script with
an optional component name. As component names in the SUIT manifest
consist of an array of bytestrings, the commponent name in the argument
is also split. Each part of the name ends up as a separate part of the
component name in the manifest. Component names are split by colons to
match the separator used in the rest of the argument.
2020-09-29 15:18:56 +02:00
f05c5f7708
riotboot/flashwrite: Add force flush to storage function
2020-09-29 15:18:56 +02:00
a00314bfc4
riotboot: Add function to retrieve the slot size
2020-09-29 15:18:52 +02:00
chrysn
5b9c1d31fd
boards/nrf52840dongle: Configure PWM to drive the LEDs
2020-09-29 15:16:22 +02:00
fc794d9a21
Merge pull request #15092 from bergzand/pr/suit/per_component_flags
...
suit: Introduce per-component flags
2020-09-29 15:03:06 +02:00
Hendrik van Essen
8dc94b6ccd
tests/driver_aip31068: add test for aip31068 driver
2020-09-29 14:42:19 +02:00
Hendrik van Essen
6778bf4b98
driver/aip31068: add new driver
2020-09-29 14:42:15 +02:00
Francisco
109012b194
Merge pull request #14923 from aabadie/pr/boards/stm32f0f1f3_clock_kconfig
...
boards/stm32f1/f3: rework clock initialization and configuration
2020-09-29 14:30:58 +02:00
a7bb409eb5
boards/stm32f0: fix missing CLOCK_APB2 define
2020-09-29 14:28:33 +02:00
