1be60741e3
boards/nrf52xxxdk: refactor UART config
2019-01-25 15:51:50 +01:00
Leandro Lanzieri
ba592ae4d3
Merge pull request #10848 from PeterKietzmann/pr_phy-kw41_ccs811condif
...
boards/phynode-kw41z:enable support for cc811 sensor
2019-01-25 11:42:40 +01:00
PeterKietzmann
536cf1b4e9
boards/phynode-kw41z:enable ccs811,mma8x5x,tcs37727 sensors
2019-01-25 11:10:08 +01:00
03ed77b141
Merge pull request #10805 from beduino-project/fix-hifive1-coreclock-define
...
boards/hifive1: fix CLOCK_CORECLOCK
2019-01-24 20:48:40 +01:00
Kevin "Bear Puncher" Weiss
06b5a58e62
Merge pull request #10802 from leandrolanzieri/pr/boards/sensebox_samd21-mtd
...
boards/sensebox_samd21: Add MTD definition
2019-01-24 12:20:16 +01:00
Martine Lenders
fbe43634d9
Merge pull request #10844 from maribu/ethernet_shield
...
boards/arduino*: Added/refactored params for W5100
2019-01-24 11:59:43 +01:00
Marian Buschsieweke
d2c8eab793
boards/arduino*: Added/refactored params for W5100
...
- ATmega based boards: Added parameter for W5100 to board_common.h
- Arduino Due based boards: Use board.h instead of providing w5100_params.h
2019-01-22 15:46:33 +01:00
7e3c382547
Merge pull request #10653 from dylad/pr/saml1x_support
...
cpu/saml1x: add support for SAML10 and SAML11 MCUs (Cortex-M23)
2019-01-22 08:53:06 +01:00
Sebastian Meiling
0edf76d362
Merge pull request #9984 from kaspar030/refactor_atmega_libc
...
cpu/atmega_common: refactor AVR libc code into module
2019-01-22 08:41:37 +01:00
Dylan Laduranty
e838f0c291
board/saml11-xpro: add support for SAML11-XPRO board
2019-01-21 17:08:02 +01:00
Dylan Laduranty
2132f5b85b
board/saml10-xpro: add support for SAML10-XPRO board
2019-01-21 17:07:42 +01:00
Dylan Laduranty
99966b318a
board/common/saml1x: add common configuration
2019-01-21 17:07:18 +01:00
8d1a0ae074
boards: revert forced use of periph_dma with STM32
...
The periph_dma is not pulled in automatically for all applications.
Applications willing to use the configured peripherals with periph_dma
for a given board will have to include the feature explictly in their
Makefile.
It was causing unrelated issues as threads got de-scheduled while
calling printf and this was not handled properly in tests at that
moment.
2019-01-21 15:14:28 +01:00
7313525035
atmega_common: refactor avr-libc-extra into avr_libc_extra module
2019-01-21 14:37:08 +01:00
c6b9bb5055
boards/b-l475e-iot01a: provide already configured features
...
RTC and RTT are available and already configured for this board but not provided by the build system
2019-01-20 13:10:25 +01:00
Leandro Lanzieri
2625a86450
boards/sensebox_samd21: Add MTD definitions
2019-01-18 13:25:35 +01:00
Tristan Bruns
8d50b8cc60
boards/hifive1: fix CLOCK_CORECLOCK
2019-01-17 17:21:09 +01:00
Tristan Bruns
6c1f2bb174
boards/hifive1: fix file permissions of flasher.sh
2019-01-17 16:33:25 +01:00
9daf3c74a9
boards/iotlab-m3: disable DMA with SPI
2019-01-15 19:49:32 +01:00
Sebastian Meiling
4a91b61ad8
Merge pull request #9930 from gebart/pr/frdm-k64f-lptmr
...
frdm-k64f: Add LPTMR configuration
2019-01-11 13:29:59 +01:00
afe3d676a5
Merge pull request #10126 from gschorcht/esp8266_doc
...
cpu/esp8266: doc extended
2019-01-11 08:00:09 +01:00
steffen
2ff2b2c1d7
drivers: Initial support for TPS6274x converter
...
drivers/tps6274x: initial support step-down converter
tests/driver_tps6274x: Added testcase for the step-down converter
boards/jiminy-mega256rfr2: Added TPS6274x config
2019-01-10 00:00:02 +01:00
Gunar Schorcht
d99d72c583
Merge pull request #10737 from aabadie/pr/boards/esp32-wroom-32-button
...
boards/esp32-wroom-32: configure saul button as inverted
2019-01-09 17:24:21 +01:00
Gunar Schorcht
fa0b4b801f
cpu/esp8266: doc fixes
2019-01-09 16:55:21 +01:00
Kevin "Bear Puncher" Weiss
0b23e8898e
Merge pull request #10641 from gschorcht/esp32_spi_revision
...
cpu/esp32: cleanup in periph/spi
2019-01-09 14:02:06 +01:00
Gunar Schorcht
cb6b7539f4
boards/esp32*: cleanup of SPI interfaces
...
SPI0_DEV and SPI1_DEV configuration parameters are renamed SPI0_CTRL and SPI1_CTRL to better describe what they define and to avoid confusion with SPI_DEV (0) and SPI_DEV (1).
2019-01-09 13:04:28 +01:00
081c4a9c90
boards/esp32-olimex-evb: configure saul button as inverted
2019-01-09 12:52:24 +01:00
484572f881
boards/esp32-wroom-32: configure saul button as inverted
2019-01-09 10:00:16 +01:00
Kevin "Bear Puncher" Weiss
a1218f007b
Merge pull request #10643 from gschorcht/esp32_uart_board_fix
...
boards/esp32: UART configuration fix
2019-01-08 17:55:38 +01:00
3a5c9cb921
boards/nucleo-f207zg: configure and use DMA
2019-01-08 09:32:18 +01:00
abc97c2a1e
boards/nucleo-l152re: configure and use DMA
2019-01-08 09:32:18 +01:00
294711d9ba
boards/nucleo-f767zi: configure and use DMA
2019-01-08 09:32:18 +01:00
0b6bccb543
boards/iotlab-m3: configure and use DMA
...
Used with UART and SPI peripheral
2019-01-08 09:32:18 +01:00
9ecf12119f
boards/b-l475e-iot01a: configure and use DMA
2019-01-08 09:32:18 +01:00
Vincent Dupont
08a85fbfdd
boards/b-l072z-lrwan1: configure and use DMA
2019-01-08 09:32:18 +01:00
Vincent Dupont
962d81b652
boards/nucleo-f091rc: configure and use DMA
2019-01-08 09:32:18 +01:00
Bas Stottelaar
00e13e5713
boards: slstk3402a: use wtimer by default
2019-01-07 18:51:08 +01:00
Kevin "Bear Puncher" Weiss
605365cae0
Merge pull request #10696 from Derwaan/board/z1_fix-btn0
...
board/z1: Fix BTN0_PIN
2019-01-07 15:29:45 +01:00
bc5e3e7721
Merge pull request #10213 from kYc0o/pr/stm32l152_add_second_bank
...
boards/common: change openocd config file for stm32l1x
2019-01-03 13:31:04 +01:00
Kevin "Bear Puncher" Weiss
d9f26dbbe2
Merge pull request #10636 from aabadie/pr/cpu/nrf5x_gpio_common
...
cpu/nrf5x: move periph_gpio/periph_gpio_irq at an even more common level
2019-01-03 11:37:48 +01:00
Gomez Julien
905855b7c2
board/z1: Fix BTN0_PIN
...
Set BTN0_PIN to GPIO_PIN(2, 5) in board.h
#10611
2019-01-03 11:35:08 +01:00
Kevin "Bear Puncher" Weiss
2bf29dd99e
Merge pull request #10692 from aabadie/pr/boards/nucleo-f767_i2c
...
boards/nucleo-f767zi: use common STM32 i2c configuration
2019-01-03 10:17:44 +01:00
Kevin "Bear Puncher" Weiss
fd15cb8f77
Merge pull request #10646 from aabadie/pr/boards/nucleo-f072-i2c
...
boards/nucleo-f072rb: configure I2C using common stm32 configuration
2019-01-03 09:48:57 +01:00
Kevin "Bear Puncher" Weiss
90b5865692
Merge pull request #10691 from aabadie/pr/boards/stm32_useless_defines
...
boards/stm32: remove useless empty conf defines
2019-01-02 17:00:30 +01:00
c0b1d37d73
boards/nucleo-f072rb: use common i2c configuration
2019-01-02 16:08:56 +01:00
402f02d471
boards/nucleo-f767zi: use STM32 common i2c config
2019-01-02 16:06:34 +01:00
9a69c9bbc5
boards/stm32: remove useless empty conf defines
2019-01-02 14:52:38 +01:00
3eba44a660
boards/nucleo-f0207zg: use common clock and i2c configuration
2019-01-02 14:29:26 +01:00
24bc5ae254
boards/nucleo-f0xx: use common i2c configuration
2019-01-02 14:23:46 +01:00
541fc7f93f
boards/stm32: add f2 common clock configuration
2019-01-02 14:23:46 +01:00
Kevin "Bear Puncher" Weiss
02ec3845de
Merge pull request #9728 from aabadie/pr/boards/stm32_common_i2c
...
boards: factorize some nucleo f4/f7/l4 i2c configuration
2019-01-02 14:05:32 +01:00
536e4a55a8
boards/nucleo-l496zg: provide and configure i2c
2019-01-02 11:27:42 +01:00
ed6dcfe872
boards/nucleo-f746zg: provide and configure i2c
2019-01-02 11:27:25 +01:00
4fd4ce4c54
boards/nucleo-f722/l476: use common i2c configuration
2019-01-02 11:26:54 +01:00
f8d8ddb1ef
boards/stm32: adapt common i2c config to f7 and l4
2019-01-02 11:25:32 +01:00
b81941f953
boards/nucleo-f4**: use common clock and I2c configuration
2019-01-02 10:30:13 +01:00
08608c350c
boards/stm32: add common I2C configuration
...
This configuration provides 1 I2C using I2C1 on PB8 and PB9, which is very common for STMs
2019-01-02 10:30:13 +01:00
11da5036fb
boards/stm32: add new common clock configurations
2019-01-02 10:30:13 +01:00
824201b9ea
boards/nucleo-l433rc: add I2C configuration
2019-01-02 10:19:46 +01:00
973a6a4c93
boards/stm32: remove unnecessary ADC defines in board config
2019-01-02 09:15:22 +01:00
Martine Lenders
b0f64dbb98
Merge pull request #9847 from aabadie/pr/tools/pyocd
...
dist/tools: add support for PyOCD programmer/debugger
2018-12-28 12:09:51 +01:00
f682476c87
boards/nucleo-l496zg: adapt conf to lpuart driver
...
Co-authored-by: Vincent Dupont <vincent@otakeys.com>
2018-12-27 14:16:05 +01:00
d2a07f0494
boards/nrf51dk: add pyocd in supported programmers
2018-12-21 14:56:26 +01:00
77c9f783bd
boards/microbit: add pyocd in supported programmers
2018-12-21 14:56:26 +01:00
Dylan Laduranty
63e71cbbde
Merge pull request #10314 from fedepell/saml21-xpro_arduino
...
boards/saml21-xpro: add Arduino API support for saml21-xpro board
2018-12-20 14:03:19 +01:00
Federico Pellegrin
dc8c84f7eb
boards/saml21-xpro: add Arduino API support for saml21-xpro board
2018-12-20 12:41:40 +01:00
Gunar Schorcht
c352966d29
boards/esp32: UART configuration fix
...
Fixes the UART pin configuration for UART_DEV(0). Since this configuration is fixed and only defined for documentation purposes, the change has no impact on the code.
2018-12-20 07:57:20 +01:00
4ae15d18b5
boards/stm32based: remove periph_gpio/irq from board level
2018-12-18 21:51:14 +01:00
839daf871a
boards/nrf52: remove periph_gpio feature
...
It is now provided at cpu level in cpu/nrf5x_common
2018-12-18 21:33:27 +01:00
Francisco Acosta
3cf33f7b5c
boards: add riotboot feature to tested boards
...
Currently only tested boards provide the feature riotboot.
Potentially all boards embeding a cortex-m0+/3/4/7 are
able to have riotboot as a feature, but other dependencies
need to be met, e.g. usage of cortexm.ld linker script,
double initialisation of cpu_init(), etc. See doc in
bootloaders/riotboot.
2018-12-18 19:31:35 +01:00
Peter Kietzmann
f1e80c4dd3
Merge pull request #10434 from aabadie/pr/sam0_gpio_features
...
cpu/sam0_common: provide periph_gpio/gpio_irq features at cpu level
2018-12-18 17:54:11 +01:00
Gaëtan Harter
321dc5292f
Merge pull request #10548 from jcarrano/flash-canned-recipe
...
Makefile.include: flash: do not peek into MAKECMDGOALS.
2018-12-18 14:09:55 +01:00
d95e19af15
boards*: remove periph_gpio/gpio_irq provided feature
...
It is now provided at cpu level
2018-12-17 20:54:09 +01:00
Martine Lenders
78308b93df
Merge pull request #10279 from aabadie/pr/boards/nrf52_common
...
boards/common/nrf52: introduce new and more generic common place
2018-12-17 12:29:57 +01:00
Martine Lenders
a3864aa103
Merge pull request #9158 from aabadie/pr/periph/stm32_lpuart
...
cpu/stm32-common: add support for lpuart
2018-12-17 12:16:27 +01:00
MrKevinWeiss
d7eb070eb4
cpu/stm32f1: Add remap support for stm32f1 cpus and boards
...
This commit fixes configuration problems when trying to use i2c pins that need to be remapped.
All B8 and B9 pins for STM32F1 need to be remapped, so a check is done if the remappable pins are selected.
2018-12-14 09:16:37 +01:00
58b85b256b
boards: update UART conf for STM32 based boards
2018-12-13 12:39:00 +01:00
537e93a527
board/nucleo-l073: use LPUART for third UART
2018-12-13 12:39:00 +01:00
8c6a7bc370
boards/nucleo-l433rc: use lpuart for stdio
...
- this UART is connected to st-link and can be reached via USB
- the second UART is linked to Arduino RX/TX pins
2018-12-13 12:39:00 +01:00
Kevin "Bear Puncher" Weiss
e0997b4fc7
Merge pull request #10600 from jia200x/pr/phyNODE_kw41Z
...
boards/phynode-kw41z: add initial support
2018-12-13 11:44:34 +01:00
5b17d52542
Merge pull request #10466 from maribu/stm32f103c_i2c
...
boards/common/stm32f103c8: Fixed I2C configuration
2018-12-13 11:25:22 +01:00
Jose Alamos
40d791e898
doc: add documentation for phynode-kw41z board
2018-12-13 10:35:50 +01:00
Jose Alamos
50c7b5c11a
boards/phynode-kw41z: add initial support
2018-12-13 10:35:50 +01:00
aa7a8058d8
boards/ruuvitag: also use nrf52 common place
2018-12-13 10:15:42 +01:00
50fb400413
boards/thingy52: also use nrf52 common place
2018-12-13 10:15:42 +01:00
5fd907eb08
boards/nrf52840dk: remove useless provided feature
2018-12-13 10:15:42 +01:00
cd2f18311f
boards/nrf52dk: remove useless provided feature
2018-12-13 10:15:42 +01:00
b2f4a7e735
boards/acd52832: also use nrf52 common place
2018-12-13 10:15:42 +01:00
5429c71cd3
boards/nrf52xxdk: use available nrf52 common place
2018-12-13 10:15:42 +01:00
cd206a909c
boards/common/nrf52: add common nrf52 place
2018-12-13 10:15:42 +01:00
Leandro Lanzieri
4ce63d00ea
Merge pull request #10280 from fedepell/stk3700_arduino
...
boards/common/silabs: add Arduino API support for SiLabs boards
2018-12-12 09:51:13 +01:00
104bb525c9
boards/microbit: fix typo in flash script
2018-12-11 11:10:53 +01:00
Juan Carrano
c6b8cbea00
kinetis-based-boards: use FLASHDEPS instead of flash: xxxx.
...
With the canned recipe for flashing, flash dependencies should be
added to FLASHDEPS, instead of writing `flash: dependencies`. This
ensures that both flash and flash-only depend on the same prerequisites.
2018-12-06 15:36:53 +01:00
MrKevinWeiss
97e84f816c
boards/frdm-k22f: Add second UART to config
...
This PR adds a second uart on two non-conflicting pins.
Since the first UART is used for shell this allows a usable UART.
2018-12-06 14:45:45 +01:00
Joakim Nohlgård
a42df69ea8
frdm-k64f: Add LPTMR configuration
2018-12-06 14:18:05 +01:00
Leandro Lanzieri
b6abbad6fb
Merge pull request #10553 from aabadie/pr/boards/feature_periph_irq_missing
...
boards/{firefly,samr30-xpro}: add missing `periph_gpio_irq` provided feature
2018-12-06 13:11:36 +01:00
e9c9fd5133
boards/samr30-xpro: add missing periph_gpio_irq feature
2018-12-05 17:56:57 +01:00
b600a908ec
boards/firefly: add missing periph_gpio_irq feature
2018-12-05 17:56:48 +01:00
Gaëtan Harter
0b664453dc
hifive1/flasher.sh: get flash file from cli
...
Get FLASH_FILE from command line instead of environment variable.
The documentation was claiming ELFFILE was given as a command line argument
already, but is was not.
This is the same change as with `openocd.sh`.
2018-12-05 16:21:03 +01:00
Gaëtan Harter
a0b97ad737
openocd: get flash and debug files from cli
...
Get FLASH_FILE and ELFFILE from command line instead of environment variable.
The documentation was claiming ELFFILE was given as a command line argument
already, but is was not.
2018-12-05 16:21:03 +01:00
