This is mostly based on the cc1352-launchpad boards, is essentially the same
buttons and leds pins, what changes is the CCXML files used to flash with
`make flash` and the UART pins.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
Fixes i-nucleo-lrwan1 board name in the BOARD_WITHOUT_LORAMAC_RX which disables the RX function of pkg/semtech_loramac and saves 1302 bytes RAM and about 2 kByte of code.
For the ATmega platform the ADC lines are not defined according to the GPIOs. Instead, they are defined from 0 to ADC_NUMOF-1, which in turn represents the bit in the corresponding ADC registers. The mapping from the line number to the corresponding ADC register/bit combination is done implicitly by the periph/adc implementation.
The reassembly buffer only needs (and stores) the headers *before* the
fragment header (called per-fragment headers in RFC 8200, section 4.5).
Currently, when a subsequent IPv6 fragment is received before the first
fragment the fragment header is however not removed. With this fix it
does.
This adds information regarding the usage of Kconfig from an user
perspective and in-depth information on how Kconfig is currently
integrated to RIOT's build system.
With the new toolchain version required to fix issue #13133, the compilation of `examples/posix_socket` fails due to a C linkage error in `atomic_base.h`. The reason is that including `drivers/include/mtd.h` in `boards/esp32/board_common.h` inside the `extern C` block finally leads to including `atomic_base.h` inside the `extern C` block which in turn to the C linkage error for the template definitions in this file.
This implements a client for DHCPv6 IA_PD (Identity Association for
Prefix Delegation). Goal was to have a IETF-compliant alternative to
UHCP. The implementation was based on RFC 8415.
f5cbe00118 disables `stdio_rtt` when `stdio_uart` is used. However,
if a board has `periph_usbdev` in `FEATURES_PROVIDED` and
`stdio_cdc_acm` is used by the application, linking fails, as now both
`stdio_rtt` and `stdio_cdc_acm` implement the STDIO functions.
This fix excludes `stdio_rtt` if any STDIO but `stdio_rtt` is provided.
If no STDIO is provided the fall-back is used as before.
It causes errors on current Renode versions. It wasn't documented on the
Renode changelog, but SetClockSource property was removed. Before this
change it showed this error:
There was an error executing command 'machine SetClockSource cpu'
machine does not provide a field, method or property SetClockSource.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
