Benjamin Valentin
64107dd3a9
cpu/lpc2387: rtc: only initialize RTC after cold boot or external reset
...
On the MCB2388 plugging the power will result in both the POR and EXTR
bit being set.
Not sure if this is a property of the board, but it means RTC is also
reset after programming, so it behaves just like Backup RAM.
If we woke from Deep Sleep the POR bit will be cleared, so the RTC is not
reset.
2020-02-10 23:04:47 +01:00
Benjamin Valentin
80dde82c86
cpu/lpc2387: clear POR bit if we woke from Deep Sleep
...
RSIR is 0x1 (POR) if we woke from Deep Sleep.
This makes it hard to distinguish between real power-on and waking from
Deep Sleep, which is why the Backup RAM signature was introduced.
However, calling cpu_woke_from_backup() a second time will always return
true, as the signature will have been set up by early boot then.
Thus, clear the POR bit if the signature was already in place.
The result is:
RSIR == 0 -> woke from sleep
RSIR == 1 -> cold boot
2020-02-10 23:04:46 +01:00
Benjamin Valentin
6dbbc8f33a
cpu/lpc2387: rtc: remove _rtc_set()
...
Calling localtime() adds considerable overhead.
There are easier ways to set the date to 1970.
For tests/periph_rtc this results in this ROM change:
master:
text data bss dec hex
31328 240 98064 129632 1fa60
with this patch:
text data bss dec hex
20036 140 98168 118344 1ce48
2020-02-10 23:04:46 +01:00
b685b4d720
Merge pull request #13303 from chrysn-pull-requests/doc-libcose
...
pkg/libcose: Add to documentation
2020-02-10 20:36:21 +01:00
Martine Lenders
ebb20f2d44
Merge pull request #13305 from miri64/gnrc_ipv6_ext_frag_stats/feat/initial
...
gnrc_ipv6_ext_frag: initial import of statistics module
2020-02-10 20:23:13 +01:00
e27a0be577
Merge pull request #13328 from bergzand/pr/docs/display_group
...
drivers: Add display device doxygen group
2020-02-10 20:19:16 +01:00
benpicco
4f8114a09f
Merge pull request #12793 from benpicco/ws281x_vt100
...
drivers/ws281x: add VT100 backend for native
2020-02-10 18:23:07 +01:00
Francisco
e2dc125fb3
Merge pull request #13308 from maribu/atmega_state_cleanup
...
cpu/atmega_common: Cleanup state flags
2020-02-10 17:37:24 +01:00
chrysn
2c83308ec2
pkg/libcose: Add to documentation
2020-02-10 17:15:57 +01:00
benpicco
b44cf48a87
Merge pull request #13246 from benpicco/lpc23xx-spi
...
cpu/lpc2387: make SPI configurable
2020-02-10 17:01:41 +01:00
benpicco
0b04f61d3b
Merge pull request #12911 from benpicco/lpc2387-adc
...
cpu/lpc2387: implement periph/adc
2020-02-10 16:13:07 +01:00
benpicco
f997f42ade
Merge pull request #13304 from miri64/gnrc_sixlowpan_frag_stats/enh/count-avg-fragments
...
gnrc_sixlowpan_frag_stats: add average fragments per datagram statistic
2020-02-10 15:23:52 +01:00
Benjamin Valentin
11d77271cf
drivers/ws281x: introduce WS281X_HAVE_INIT
...
This brings the backend-dependant init() function in line with
`WS281X_HAVE_PREPARE_TRANSMISSION` and `WS281X_HAVE_END_TRANSMISSION`.
2020-02-10 14:45:26 +01:00
Benjamin Valentin
720eff3416
tests/driver_ws281x: allow build on native
...
Also add an additional newline before each test title to improve
the rendering on native console output.
2020-02-10 14:45:26 +01:00
Benjamin Valentin
8352e4aae0
drivers/ws281x: add VT100 backend for native
...
To quickly iterate on animations it is handy to being able to simulate
the output on native.
This adds a VT100 terminal backend to the ws281x driver that outputs
the colors straight to the terminal.
2020-02-10 14:40:15 +01:00
6b2478953c
pcd8544: move to display devices doxygen group
2020-02-10 14:11:17 +01:00
7ade31ad5b
ili9341: move to display devices doxygen group
2020-02-10 14:11:05 +01:00
d070f2924d
hd44780: move to display devices doxygen group
2020-02-10 14:10:46 +01:00
965a0f9c9a
dsp0401: move to display devices doxygen group
2020-02-10 14:10:18 +01:00
8a481abc90
drivers: Add display devices doxygen group
2020-02-10 14:09:57 +01:00
2e32a11822
Merge pull request #13326 from aabadie/pr/doc/ili9341_cleanup
...
drivers/ili9341: cleanup doxygen documentation
2020-02-10 14:08:35 +01:00
Benjamin Valentin
d675eb7cbb
boards/mcb2388: update SPI configuration
2020-02-10 13:41:00 +01:00
Benjamin Valentin
4342d81220
boards/mcb2388: add ADC configuration
...
The MCB2388 has a potentiometer connected to an ADC input.
2020-02-10 13:25:26 +01:00
Benjamin Valentin
9c0dfaada9
boards/msba2: add ADC configuration
...
ADC pins are on the AD/DA pins (JP8).
Configure AD0.0 - AD0.2 as laid out on the board schematics.
2020-02-10 13:25:26 +01:00
Benjamin Valentin
13e578bc84
cpu/lpc2387: implement periph/adc
...
lpc23xx has a 10 bit ADC with up to 8 channels.
The ADC should be clocked at 4.5 MHz or less, so it uses
(72MHz CCLK / 8) / 2.
2020-02-10 13:25:26 +01:00
e573d8b57f
drivers/ili9341: cleanup doxygen documentation
2020-02-10 11:46:01 +01:00
1ad14f3c79
Merge pull request #13322 from francois-berder/cleanup-numof
...
boards: Use ARRAY_SIZE for setting UART_NUMOF, SPI_NUMOF, I2C_NUMOF
2020-02-10 11:38:51 +01:00
Francois Berder
b4ab22673e
boards: Use ARRAY_SIZE for setting UART_NUMOF, SPI_NUMOF, I2C_NUMOF
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-02-09 20:55:46 +00:00
Dylan Laduranty
b5bb846d3a
Merge pull request #13312 from benpicco/cpu/sam0-vendor_cleanup
...
cpu/sam0_common: use vendor provided MCU header dispatch
2020-02-07 20:33:45 +01:00
Gunar Schorcht
c585535640
Merge pull request #13291 from aabadie/pr/boards/makefile_dep
...
boards: move remaining uses of USEMODULE from Makefile.include to Makefile.dep
2020-02-07 16:16:02 +01:00
benpicco
16ab89bf28
Merge pull request #12728 from bergzand/pr/at86rf2xx/fix_recv_before_send
...
at86rf2xx: fix receive before send detection
2020-02-07 13:54:52 +01:00
Gunar Schorcht
3514eecf9d
Merge pull request #12474 from kaspar030/add_event_threads
...
sys: add shared event threads
2020-02-07 13:29:29 +01:00
713fead00a
boards: move some USEMODULE to Makefile.dep
2020-02-07 13:21:22 +01:00
benpicco
5a4d39e2ee
Merge pull request #13288 from catcombo/fix-ds18-temperature-conversion
...
Fix ds18 temperature conversion
2020-02-07 13:09:22 +01:00
42d54600f7
at86rf2xx: fix receive before send detection
...
The at86rf2xx radio handled a transfer complete condition with the radio
in the BUSY_TX_ARET state as a finished transmission. This condition and
state also occurs when a reception occurs just before switching to
transmitting. This would cause a condition where first a TX_COMPLETE was
signalled and second a RX_COMPLETE was signalled. The network stack
would then read the transmitted frame as a received frame.
The patch fixes the errornous RX callback by only submitting the
TX_COMPLETE condition when there are at least 2 frames pending
(at86rf2xx::pending_tx).
2020-02-07 13:08:33 +01:00
benpicco
dfcf155aa6
Merge pull request #13311 from benpicco/cpu/samr21-asf
...
cpu/sam0_common: update samr21 vendor files to version 1.1.72
2020-02-07 13:06:11 +01:00
9a93805bee
tests/event_threads: initial event threads test application
2020-02-07 12:17:56 +01:00
e01ad86eb3
sys/event: add shared event threads
2020-02-07 12:17:56 +01:00
Benjamin Valentin
b0078b1a98
cpu/sam0_common: update samr21 vendor files to version 1.1.72
...
This release adds EXTINT defines compatible with later versions of
the sam0 series of MCUs.
2020-02-07 12:14:45 +01:00
Cenk Gündoğan
7459adda79
Merge pull request #13292 from leandrolanzieri/pr/makefile_base/module_simple_exp
...
makefiles: Use simple expansion for widely used variables
2020-02-07 12:02:04 +01:00
Evgeniy Krysanov
234313a9f1
drivers/ds18: add arduino-nano to BOARD_WHITELIST in ds18 driver test
2020-02-07 12:55:43 +03:00
benpicco
66c7c63c94
Merge pull request #13061 from gschorcht/cpu/esp32/rtc_xtal_32k
...
cpu/esp32: allow external 32 kHz crystal for the RTC hardware timer
2020-02-07 10:24:22 +01:00
Gunar Schorcht
1e71606305
boards/esp32: enable 32 kHz XTAL for WROVER-KIT
2020-02-07 00:46:16 +01:00
Gunar Schorcht
4c0cfdcc8e
cpu/esp32: allow external 32 kHz crystal for RTC
2020-02-07 00:46:16 +01:00
Peter Kietzmann
b339b1c134
Merge pull request #13254 from maksim-ka/pr-relic-branch
...
pkg/relic: use random module for seeding relic PRNG
2020-02-06 23:48:43 +01:00
maksim-ka
d3d181c5a8
pkg/relic: use random module for seeding relic PRNG
2020-02-06 21:11:39 +01:00
Benjamin Valentin
bd1953dd80
cpu/sam0_common: use vendor files to dispatch MCU headers
...
Instead of manually re-creating the files from ASF, just use
the vendor provided dispatch headers and ease the maintainance
burden.
2020-02-06 19:52:05 +01:00
Benjamin Valentin
fd793b8917
cpu/samd51: add common header file from ASF
...
Somehow I forgot to commit this.
2020-02-06 19:49:50 +01:00
benpicco
615739a961
Merge pull request #13302 from Einhornhool/cryptoauth-device-conf
...
tests/pkg_cryptoauthlib_internal_tests: add unsupported device handling
2020-02-06 18:33:35 +01:00
benpicco
24fb7a9aae
Merge pull request #12933 from maribu/atmega_pcint_cleanup
...
cpu/atmega_common/periph/gpio: Clean up PCINT support
2020-02-06 18:29:15 +01:00
