Allow accessing supported timer frequencies with a dedicated API.
This API needs to be implemented per platform and is available with
the feature periph_timer_query_freqs.
19539: drivers/periph_sdmmc: define a High-level SDIO/SD/MMC API and low-level SDMMC periperal driver interface r=benpicco a=gschorcht
### Contribution description
This PR provides a SDIO/SD/MMC Device API (SDMMC). It implements a SD host controller driver that provides a high-level functions using a low-level SDIO/SD/MMC peripheral driver for accessing
- MultiMediaCards (MMC) and Embedded MultiMediaCards (eMMC)
- SD Memory Cards (SD Cards) with Standard Capacity (SDSC), High Capacity (SDHC) or Extended Capacity (SDXC).
It supports:
- 1-bit, 4-bit and 8-bit data bus width
- Default Speed and High Speed
- Auto-CLK
The SDIO/SD/MMC device API (SDMMC) is divided into two parts:
1. The high-level API that implements the SD Host Controller driver and allows
- to inititialize and identify different types of cards,
- to access them either blockwise or bytewise,
- to get information about the used card, and
- to send single commands or application specific commands to the card.
2. The low-level SDIO/SD/MMC peripheral driver implements the low-level functions required by the high-level device API. It has to be implemented for each MCU.
### Limitations:
- Only one card per SDIO/SD/MMC device is supported.
- eMMCs specific features are not supported.
- UHS-I, UHS-II and UHS-III are not supported.
### Testing procedure
PR #19540, PR #19760 or PR #19786 is needed to test this PR.
### Issues/PRs references
Prerequisite for PR #19540
Prerequisite for PR #19760
Prerequisite for PR #19786
19815: cpu/sam0_common/periph/sdhc: busy waiting and clock fixes r=benpicco a=benpicco
19860: drivers/ft5x06: fix vendor ID for FT6xx6 and FTxxxx register addresses r=benpicco a=gschorcht
### Contribution description
This PR provides a fix of the vendor ID for FT6xx6 touch panel driver ICs and a fix of register addresses for FTxxxx.
According to the [Application Note for FT6x06 CTPM](https://cdn-shop.adafruit.com/datasheets/FT6x06_AN_public_ver0.1.3.pdf), the vendor ID of FT6x06 touch panel driver ICs is `0x11` instead of `0xcd`. Although there are no information found in the Web about the FT6x36, the FT6336U touch panel of a ESP32-S3 WT32 SC01 Plus is also working with `0x11` as vendor ID so that it seems that FT6x36 is also using `0x11` as vendor ID.
Figured out with a `stm32f723e-disco` board (revision D03). Without this PR, `tests/drivers/ft5x06` gives:
```
+------------Initializing------------+
[ft5x06] init: invalid vendor ID: '0x11' (expected: 0xcd)
[Error] Initialization failed
```
With this PR it works as expected.
```
+------------Initializing------------+
Initialization successful
main(): This is RIOT! (Version: 2023.10-devel-96-gbb9011-drivers/ft5x06_fix_vendor_id)
FT5x06 test application
+------------Initializing------------+
[ft5x06] init: configuring touchscreen interrupt
Initialization successful
1 touch detected
[ft5x06] read gesture_id '0x00'
Touch 1 - X: 151, Y:138
[ft5x06] read gesture_id '0x00'
```
Some background information found in the Web:
- According to the [STM32CubeF7](c20e6dd15b/Drivers/BSP/STM32F723E-Discovery/stm32f723e_discovery_ts.c (L24-L27)) the FRIDA LCD panel mounted on the `stm32f723e-disco` board either uses FT6x36 (prior revision D) or FT3x67 (revision D). However, the FT5x06 driver type for the card is defined as FT6x06, which does not seem correct: bb9011c3fb/boards/stm32f723e-disco/include/board.h (L59)
- According to the [STM32CubeF7](c20e6dd15b/Drivers/BSP/Components/ft6x06/ft6x06.h (L269-L270)), the vendor ID for FT6x36 should be `0xcd`. However, the FT6336U on ESP32-S3 WT32 SC01 Plus works with vendor ID `0x11`.
- The [Adafruit FT6206 library](95118cd983/Adafruit_FT6206.h (L28)) uses `0x11` as vendor id.
- The `stm32l496g-disco` board uses a FT6236 which has vendor ID `0xcd`.
So the information available on the web is confusing. Maybe, a better solution would be to accept `0x11` as well as `0xcd` as vendor ID for FT6xxx touch panels. Unfortunately, there are no documents available on the registers directly from FocalTech 😟 so it seems to be more speculation than knowledge.
### Testing procedure
### Issues/PRs references
19886: cpu/efm32: fix DAC configuration r=benpicco a=gschorcht
### Contribution description
The EFM32 MCU allows the reference voltage to be configured per DAC device, not per DAC channel. Also, the DAC reference voltage was defined in the configuration but not used anywhere.
At the moment we have only defined one board (`stwstk6220a`) that uses the DAC, so changing the configuration interface shouldn't be critical.
### Testing procedure
`tests/periph/dac` should still work for the `stwstk6220a`
```
BOARD=slwstk6220a make -j8 -C tests/periph/dac flash
```
I don't have a `stwstk6220a` board (EFM32 Series 0) so that I can't test it. I could only test it for the `sltb009a` board (EFM32 Series 1) with the change for VDAC in PR #19887.
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
19712: cpu/riscv: Add PMP driver r=MrKevinWeiss a=Teufelchen1
### Contribution description
Hi! 🐘
this adds a basic RISC-V physical memory protection (PMP) driver to RIOT. Well, 'driver' might be a stretched, feels more like a little utility :)
EDIT: Also added a no-execute RAM option for the hifive & a corresponding test
Since I only have an Hifive rev b, it's only enabled on this board / cpu. I also tested the code on an ESP32-C but the feature can't be enabled there, as `cpu/riscv_common/` is not used by the ESP32...
### Testing procedure
* Grab a hifive rev b
* go to `examples/hello-world`
* Add `USEMODULES += periph_pmp` to the `Makefile`
* Include `pmp.h` in `main.c`
* Add code e.g. `print_pmpcfg(0);`
* compile & flash & term
You should see something like this:
```
# Hello World!
# You are running RIOT on a(n) hifive1b board.
# This board features a(n) fe310 MCU.
# pmp00cfg: - R-X OFF 0x00000000 - 0x00000000
```
Co-authored-by: Teufelchen1 <bennet.blischke@outlook.com>
- Rename all `arduino_pinmap.h` to `arduino_iomap.h`
- An empty `arduino_pinmap.h` that just includes `arduino_iomap.h`
is provided for backward compatibility
- Move all info from `arduino_board.h` into the new file as trivial
macros, so that they can also be used outside of sketches
- The new name reflects the fact not just pin mappings, but also
other I/O features such as PWMs are mapped
- Drop all `arduino_board.h`
- `arduino_board.h` and `arduino_iomap.h` now provide the exact
same information, just in a different format
- a generic `arduino_board.h` is provided instead that just
uses the info in `arduinio_iomap.h` and provides them in the
format the code in `sys/arduino` expects it
- Add fine grained features to indicate for mappings
- availability of mappings for analog pins, DAC pins, PWM pins,
UART devices, SPI/I2C buses to the corresponding RIOT
identification can now be expressed:
- `arduino_pins`: `ARDUINO_PIN_0` etc. are available
- `arduino_analog`: `ARDUINO_A0` etc. are available
- `arduino_pwm`: `ARDUINO_PIN_13_PWM_DEV` etc. are available
- `arduino_dac`: `ARDUINO_DAC0` etc. are available
- `arduino_uart`: `ARDUINO_UART_D0D1` or similar are available
- `arduino_spi`: `ARDUINO_SPI_ISP` or similar are available
- `arduino_i2c`: `ARDUINO_I2C_UNO` or similar are available
- mechanical/electrical compatibility with specific form factors
can now be expressed as features:
- `aruino_shield_nano`: Arduino NANO compatible headers
- `aruino_shield_uno`: Arduino UNO compatible headers
- `aruino_shield_mega`: Arduino MEGA compatible headers
- `aruino_shield_isp`: ISP header is available
This provides the groundwork to implement shield support as modules
that can rely on the I/O mappings, rather than having to provide a
configuration per board.
To be able to define configurations like EP data sizes depending on whether full-speed or high-speed USB device peripherals are used, the feature `HAS_PERIPH_USBDEV_HS` is introduced.
To control the compilation of NimBLE modules `nimble_*_ext` that require the Bluetooth 5 Advertising Extension, the `ble_adv_ext` is introduced to indicate that a platform supports this feature.
These BLE_* features are not necessarily nRF5x specific and should be defined as common features. The commit also fixes the alphabetical order for HAS_RUST_TARGET.
For RISC-V and Cortex-M-not-3, triples are known and have worked in some
configuration, but do not work at the moment and stay disabled until the
reference platforms (native, M3) have been established well.
The RTT overflow callback is not available on all RTT implementations.
This means it is either a no-op or `rtt_set_overflow_cb()` is a no-op
or it will overwrite the alarm set with `rtt_set_alarm()`.
This adds a feature to indicate that proper overflow reporting is available.
Some periph_rtt implementations do not provide `rtt_set_counter()`. This
adds `periph_rtt_set_counter` as feature to allow testing for its
availability. The feature is provided at CPU level if periph_rtt is
provided by the board for all CPUs implementing `rtt_set_counter()`.
flashpage currently requires pagewise implementation with an optional
extension for per block writes (flashpage_raw). Most implementations
with flashpage_raw implement the pagewise access via the flashpage_raw
functions. This commit makes the flashpage raw the main access method
and adds an extension feature for the pagewise access.
The functions and defines are renamed to reflect this. The API is also
extended with a dedicated function for erasing a sector.
On samd5x only the RTC can wake the CPU from Deep Sleep (pm modes 0 & 1).
The external interrupt controller is disabled, but we can use the tamper
detection of the RTC.
If an gpio interrupt is configured on one of the five tamper detect pins,
those can be used to wake the CPU from Deep Sleep / Hibernate.
