As analyzed in #12678 there are cases where different reports can be
generated for the different snips of the packet send via the `sock`.
To catch all errors generated by the stack, the sock has to subscribe
for all snips of the packet sent. If any of the snips reports an error
distinct from `GNRC_NETERR_SUCCESS` or the previous one, we report that
status instead of just the first we receive. This way we are ensured to
have the first error reported by the stack for the given packet.
IS_ACTIVE allows to evaluate macro definitions in non-preprocessor
expressions. It takes a macro that may be defined to 1 or not defined at
all and expands to 1 or 0 respectively.
ATmega128RFA1/ATmega256RFR2 do not have a unique CPU ID.
Use the RC oscillator callibration byte as an impromptu CPU ID and rely
on bootlader constants present on all ATmega families for the remaining
bytes.
This way we can provide a faux CPU ID on all ATmega MCUs and typical hobbyists
with no access to JTAG adapters or high voltage programmer capable of writing
the user signature have a good chance that the CPU IDs of their device do not collide.
This reverts commit cf01c743a8.
Adding an unexplained delay seemed wrong in the first place, but it fixed
the display on the MCB2388.
Turns out the display was erroneously operating in 8-bit mode due to the
uninitialized flag register.
Why the delay helped here I don't know.
But with #12634 fixing this, this hack is not needed anymore.
This converts the hard-coded UART driver to the new ways.
- allow the board to configure the RX & TX pins
- allow for more than one UART
- allow setting the baudrate
- implement poweron()/poweroff() functions
cd1ce6b98d accidentally disabled generating documentation for
`xtimer_msg_*()` functions.
Always define those functions when building the documentation.
Arduino is always enabling C++11 support, so sketches and libs are depending on
it. Every C++ compiler has been enabling C++11 by default for some years now.
Still, Ubuntu's avr-gcc is so **horrible** out of date, that it is not enabled
there. As a simple work around, -std=c++11 is now passed to the C++ compiler if
Arduino is used.
This imports the protocol parameters for Selective Fragment Recovery
(SFR). For the values I took some educated guesses based on my
experience with previous experimentation with fragment forwarding.
The defines currently are based on [draft v7].
[draft v7]: https://tools.ietf.org/html/draft-ietf-6lo-fragment-recovery-07#section-7.1
fixup! gnrc_sixlowpan_frag: initial import of SRF parameters
