Change documentation on return codes in periph/timer API to
return 0 on success and (-1) on error by default.
For timer_init this was already the case, but for timer_set,
timer_set_absolute, and timer_clear this is now changed
from 1 to 0 for success, while error remains (-1).
i2c_release() should not have a return value, as:
- There is no reasonable error handling possible by the caller, so there is no
value in indicating success/failure via the return value to the caller
- There is no legitimate reason to fail *unless* an invalid I2C bus was released
or an I2C bus that was not previously acquired was released
--> This would indicate a bug in the code and should be tackled by an
assert()
This driver is compliant with the candev interface. It has been tested
with STM32F0 and STM32F2 and STM32F413 ONLY at this time but should be
compliant with other STM32Fx devices
This commit adds usbdev, a common API to interface USB peripheral
devices. The API is split into two parts, one for the USB device itself
and one for the USB endpoint.
Change description to reflect the configurability of the serial
interface.
Also, fix the uart_mode parameter description as the UART will be
configured and not initialized.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
As suggested in PR#5899 add a routine uart_mode() that will
setup data bits, stop bits and parity at runtime.
uart.h provides a set of enums defining these settings and each
platform will override them to specify values corresponding to
its configuration registers.
The idea behind the enums is to specify default settings i.e. 8N1
through the 0 value item. Invoking uart_mode(uart, 0, 0, 0) will
setup 8N1 mode.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
The write_reg/s states a repeated start write is used but that is not how the i2c is implemeneted.
Most devices also only use a continuous write so the API should be changed to match implementation and the majority of sensors.
