Marian Buschsieweke
80c202f3e5
tests/gnrc_ipv6_nib: Use NETOPT_MAX_DPU_SIZE
...
Updated the test to use NETOPT_MAX_DPU_SIZE instead of the deprecated
NETOPT_MAX_PACKET_SIZE
2019-02-18 20:19:07 +01:00
Marian Buschsieweke
6efd1f840a
tests/gnrf_netif: Use NETOPT_MAX_DPU_SIZE
...
Updated the test to use NETOPT_MAX_DPU_SIZE instead of the deprecated
NETOPT_MAX_PACKET_SIZE
2019-02-18 20:19:04 +01:00
ac775b8ae5
Merge pull request #9181 from haukepetersen/opt_event_independencefromthread
...
sys/event: make event queue independent from thread
2019-02-16 13:50:14 +01:00
Simon Brummer
63ea8080f6
gnrc_tcp: fix test setup
2019-02-16 08:23:20 +01:00
Leandro Lanzieri
aefdc6550c
tests: Add test for AD7746 driver
2019-02-15 13:37:45 +01:00
Juan I Carrano
643de0a857
Merge pull request #11005 from cladmi/pr/test/periph_eeprom/use_eeprom_clear_byte
...
tests/periph_eeprom: use EEPROM_CLEAR_BYTE
2019-02-12 18:00:53 +01:00
Gaëtan Harter
8e4b11cdd0
Merge pull request #10369 from miri64/gnrc_ipv6_nib/fix/arsm-16-bit
...
gnrc_ipv6_nib/arsm: ensure proper int width in backoff calculation
2019-02-12 17:54:52 +01:00
Martine Lenders
f5086e76df
tests/unittests: add tests for exponential NS backoff
2019-02-12 17:01:14 +01:00
Gaëtan Harter
c894b67733
tests/periph_eeprom: take EEPROM_CLEAR_BYTE into account
...
After being cleared, the memory can be `0xFF` for `atmega` platforms for
example.
Fix the test to take EEPROM_CLEAR_BYTE into account.
2019-02-12 16:37:42 +01:00
Gaëtan Harter
3058c8c645
tests/periph_eeprom: use memcmp for cleared bytes
...
`strcmp` was used to check that the 4 bytes were empty but was not
testing what it should as an empty string is `0` bytes long.
The whole must be verified.
2019-02-12 16:37:42 +01:00
Gaëtan Harter
7455e0b6fe
tests/periph_eeprom: use memcmp
...
Use `memcmp` where it is obvious it is not doing a string comparison.
2019-02-12 16:37:42 +01:00
Gaëtan Harter
6d8fd279ac
tests/periph_eeprom: remove useless casts
...
Casting to `const char *` is not necessary as input, the type are
already the right ones.
It could not be before as `result` was with the wrong type.
2019-02-12 16:37:42 +01:00
Gaëtan Harter
c029fcde11
tests/periph_eeprom: fix 'results' type
...
Results type should only be an array of char, not an array of pointers.
2019-02-12 16:37:42 +01:00
Martine Lenders
875377d622
tests/unittests: suppress cppcheck redundantAssignment warning
...
To make the CI happy ;-).
2019-02-08 23:35:37 +01:00
Martine Lenders
2451fb36f8
tests: add unittest for state corruption in NC cache-out
2019-02-08 19:22:51 +01:00
Kees Bakker
50ec5130d6
drivers: add support for SHT2x (I2C temp and humidity sensor)
...
Several parts were inspired by a driver written by:
George Psimenos (gp7g14@soton.ac.uk )
Steffen Robertz (steffen.robertz@rwth-aachen.de )
2019-02-05 22:17:30 +01:00
PeterKietzmann
b2857529ef
tests/gnrc_tcp_server: don't set PORT=tap0 as default
2019-02-05 15:01:12 +01:00
PeterKietzmann
e03bbb4f2e
tests/gnrc_tcp_client: don't set PORT=tap1 as default
2019-02-05 15:01:05 +01:00
Kevin "Bear Puncher" Weiss
7dc243e3cc
Merge pull request #10220 from bergzand/pr/crypto/chacha20poly1305
...
chacha20poly1305: Initial implementation of AEAD cipher.
2019-02-04 12:52:24 +01:00
f4a4f5d0b1
chacha20poly1305: Provide a test based on the rfc
...
Add a test case to the crypto tests testing the chacha20poly1305
algorithm with the test vectors from rfc 8439.
2019-02-04 09:29:26 +01:00
Martine Lenders
73d72c0c52
Merge pull request #10893 from aabadie/pr/tests/periph_rtt
...
tests/periph_rtt: add Python script for automatic testing + use 5s delay between Hellos
2019-02-01 10:20:46 +01:00
Kevin "Bear Puncher" Weiss
1d693403b6
Merge pull request #10743 from yegorich/uart-enhanced-settings
...
RFC: UART enhanced settings
2019-01-31 17:11:28 +01:00
Sebastian Meiling
805efb69c5
Merge pull request #10458 from MichelRottleuthner/pr_driver_sds011
...
add driver for SDS011 active laser dust sensor
2019-01-31 15:54:09 +02:00
Yegor Yefremov
2673b662af
tests/periph_uart: add tests for uart_mode
...
Add positive and negative tests for data bits, stop bits and parity:
- 7E1, 7O1
- 8E1, 8O1
- 8N2
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-01-31 14:15:20 +01:00
Yegor Yefremov
738cbf685b
tests/periph_uart: add support for changing serial
...
Add command mode that will be used like this:
mode <dev> <data bits> <parity> <stop bits>
This command must be called after init otherwise
the UART won't be fully initialized.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-01-31 14:15:20 +01:00
6a570f3a82
tests/periph_rtt: add automatic testing script
2019-01-31 10:47:05 +01:00
aee4771a42
tests/periph_rtt: use a 5s delay between each hello
2019-01-31 10:46:56 +01:00
f6e616d48f
tests/pkg_semtech-loramac: fix send return value management
2019-01-30 18:58:43 +01:00
Michel Rottleuthner
17a1358ccb
tests: add test application for sds011 driver
2019-01-30 13:15:17 +01:00
782b181b63
Merge pull request #10887 from aabadie/pr/make/distclean_cleanup
...
tests: remove leftover test targets in test application makefiles
2019-01-28 16:25:02 +01:00
Marian Buschsieweke
075ad47bb3
tests/driver_ltc4150: BOARD_INSUFFICIENT_MEMORY
2019-01-28 13:53:47 +01:00
Marian Buschsieweke
2ba57ac00c
tests/driver_ltc4150: Workarround for msp430
...
The msp430 toolchain is missing an `fputs()` implementation. This commit makes
them use the `printf("%s", str);` instead of `fputs(str, stdout);`, which is
semantically equivalent (but has more overhead).
2019-01-28 13:53:38 +01:00
Marian Buschsieweke
618e2e58d5
tests: Added test for ltc4150 driver
2019-01-28 13:50:42 +01:00
Marian Buschsieweke
5acd87bf6f
tests/saul: Updated BOARD_INSUFFICIENT_MEMORY
2019-01-28 13:33:27 +01:00
9bf82ecd16
tests/pkg_cmsis-dsp: remove useless test target
2019-01-28 10:26:36 +01:00
3ef9707e40
tests/cond_order: remove useless test target
2019-01-28 10:26:20 +01:00
MrKevinWeiss
957cc83cc6
doc: Update copywrites it include HAW
2019-01-28 09:08:50 +01:00
eb79ba0400
tests/pkg_lora-serialization: remove useless test target
2019-01-27 19:39:26 +01:00
Ken Bannister
e96209fddb
net/gcoap: use coap_opt_finish in unit tests
2019-01-27 09:14:46 -05:00
b8565e492d
Merge pull request #10851 from miri64/tests/feat/gnrc_sixlowpan_frag-tests
...
tests: provide unittests for gnrc_sixlowpan_frag/rbuf
2019-01-25 17:55:28 +01:00
Martine Lenders
6ff06d3f41
tests: provide unittests for gnrc_sixlowpan_frag/rbuf
...
The reason I put these unittests into their own application is that I
intentionally wanted to test this module very isolated.
2019-01-25 16:57:09 +01:00
Kevin "Bear Puncher" Weiss
06b5a58e62
Merge pull request #10802 from leandrolanzieri/pr/boards/sensebox_samd21-mtd
...
boards/sensebox_samd21: Add MTD definition
2019-01-24 12:20:16 +01:00
Sebastian Meiling
907b761750
Merge pull request #10792 from gschorcht/esp8266_esp_wifi_netdev
...
esp8266: esp_wifi netdev driver
2019-01-24 12:09:46 +01:00
Gunar Schorcht
e6cf33eb4c
tests/lwip*: blacklist esp8266 boards
2019-01-24 10:29:19 +01:00
Sebastian Meiling
44234783da
Merge pull request #10823 from kb2ma/nanocoap/verify_before_write_option
...
net/nanocoap: validate option length
2019-01-24 09:23:26 +01:00
Ran Berant
59416fc6ce
drivers/at: make at_dev_init() return uart initialize status
...
in case there's an error uart_init() returns an error value,
this value indicates the reason for the error thus we should
return it from at_dev_init() so the user will be able to identify
whether the init succeded or failed.
2019-01-23 19:02:14 +02:00
Martine Lenders
d3f8739a1e
Merge pull request #5949 from zhuoshuguo/add_timeout_module_to_gnrc_mac
...
gnrc_mac: add timeout module.
2019-01-22 10:34:30 +01:00
7e3c382547
Merge pull request #10653 from dylad/pr/saml1x_support
...
cpu/saml1x: add support for SAML10 and SAML11 MCUs (Cortex-M23)
2019-01-22 08:53:06 +01:00
94d6bafc28
Merge pull request #10831 from cladmi/pr/tests/adapt_tests_auto_lookup
...
tests/posix_semaphore: private sub functions for tests libs
2019-01-21 18:02:37 +01:00
Dylan Laduranty
7afacf97e7
tests/*: add saml1*-xpro to BOARD_INSUFFICIENT_MEMORY
2019-01-21 17:11:32 +01:00
Dylan Laduranty
762e5251b4
tests/unittests: disable optimization for test_atomic_inc_rollover
...
Disable optimization for this function only with CPU_SAML1X MCUs due to an internal crosscompiler bug
2019-01-21 17:10:19 +01:00
zhuoshuguo
79e5586d0c
gnrc_mac: add timeout module.
...
Co-Authored-By: zhuoshuguo <zhuosgzju@gmail.com>
2019-01-21 22:46:10 +08:00
e990391948
tests/periph_dma: add automatic testing of DMA over UART
2019-01-21 15:06:16 +01:00
Gaëtan Harter
6e7fa9e9e0
tests/posix_semaphore: private sub functions for tests libs
...
While trying python test libraries, like pytest, the automatic test collection
detects the `testNUM` functions as tests but does not know the `term` argument
and fails.
This declares them as private to only find `testfunc(child)` entry point.
Another solution could have been to use `testNUM(child)` and rename
`testfunc` to `main` but would not match other tests.
2019-01-21 12:32:29 +01:00
Ken Bannister
715b79a1e7
tests/nanocoap: build request that fills buffer
2019-01-18 12:34:55 -05:00
Sebastian Meiling
f9a3bdf1a7
Merge pull request #10671 from kb2ma/nanocoap/retry_qty
...
net/nanocoap: fix confirmable retry countdown
2019-01-18 17:49:00 +01:00
Dylan Laduranty
a78f357b26
Merge pull request #10813 from aabadie/pr/tests/pkg_hacl_monocypher
...
tests/pkg_{hacl,monocypher}: set custom timeout value
2019-01-18 16:08:29 +01:00
a1546375da
tests/periph_rtc: add automatic python test script
2019-01-18 14:42:58 +01:00
ebb45459b0
Merge pull request #10777 from fedepell/test_flashpage_enh_1
...
tests/periph_flashpage: improve flashpage tests
2019-01-18 14:37:39 +01:00
Leandro Lanzieri
2625a86450
boards/sensebox_samd21: Add MTD definitions
2019-01-18 13:25:35 +01:00
Ken Bannister
2e2847372c
tests/nanocoap: allow server to ignore requests
2019-01-18 05:47:43 -05:00
a1736b08ad
tests/pkg_{hacl,monocypher}: set custom timeout value
...
On samr30-xpro the tests takes respectively 20 and 14 seconds to complete
2019-01-18 11:29:46 +01:00
939774105f
tests/periph_rtc: fix alarm period in README
...
The default period value the application code is set to 2s
2019-01-18 09:17:30 +01:00
Gaëtan Harter
5260b62160
tests/build_system_utils: fix TESTS name collision
...
TESTS is used to find the tests files for the application but was used
to list test targets. Rename to COMPILE_TESTS as already done in some of
my other applications.
2019-01-16 18:24:13 +01:00
Sebastian Meiling
2fde8335c9
Merge pull request #10728 from keestux/memcpy-struct-copy
...
Do normal assignment instead of memcpy
2019-01-16 09:18:44 +01:00
Federico Pellegrin
4b7c37cca0
tests/periph_flashpage: improve flashpage tests
...
-) verify correctness of data written by raw write test
-) write to really last flash page and not last - 1
-) use flashpage_addr instead of manual calculation
2019-01-16 05:29:23 +01:00
Emmanuel Baccelli
209d90bc00
Merge pull request #10215 from kYc0o/pr/riotboot_multislot
...
riotboot: add multislot support
2019-01-15 19:04:28 +01:00
Francisco Acosta
8e5ac629e0
tests/riotboot: extend to accept slot 0 or 1
...
Modify the test to accept slot values 0 and 1.
2019-01-14 16:14:34 +01:00
Cenk Gündoğan
6a4c764c95
Merge pull request #10569 from miri64/gnrc_netif/enh/rm-get-NETOPT_IPV6_IID
...
gnrc_netif: make _get_iid() just wrapper around _iid_from_addr()
2019-01-14 14:09:34 +01:00
Martine Lenders
7ae90564d9
gnrc_netif: make _get_iid() just wrapper around _iid_from_addr()
...
This way the IID generation gets much simplified and code duplication
is avoided since it removes GNRC's requirement for NETOPT_IPV6_IID.
2019-01-14 13:42:58 +01:00
9767dd3d49
Merge pull request #10754 from kaspar030/fix_nanocoap_optlen
...
nanocoap: fix server-side option_count overflow
2019-01-14 13:26:37 +01:00
Ken Bannister
1058a8d07e
tests/nanocoap: add test for option parse overflow
2019-01-14 12:30:06 +01:00
dd53bb89f7
tests/unittests/nanocoap: add test case for option_count overflow
2019-01-14 12:30:06 +01:00
José Alamos
5b350d6b2a
Merge pull request #10392 from miri64/tests/new/gnrc_rpl_srh
...
tests: introduce dedicated `gnrc_rpl_srh` test
2019-01-11 15:42:23 +01:00
Martine Lenders
3ff2edfe33
tests/gnrc_rpl_srh: output unittests as text
2019-01-11 15:18:53 +01:00
Martine Lenders
1d5184a948
tests: move gnrc_rpl_srh unittests to dedicated test application
2019-01-11 15:18:52 +01:00
Martine Lenders
df3d1be3e6
tests/gnrc_rpl_srh: introduce dedicated gnrc_rpl_srh test
2019-01-11 15:18:52 +01:00
José Alamos
bb095e45ce
Merge pull request #10382 from miri64/tests/enh/gnrc_ipv6_ext_scapy
...
tests/gnrc_ipv6_ext: port to scapy
2019-01-11 13:44:35 +01:00
Martine Lenders
70c970695a
tests/gnrc_ipv6_ext: port to scapy
2019-01-11 13:27:21 +01:00
Kees Bakker
c12db036d0
tests/driver_sx127x: do normal assignment instead of memcpy
2019-01-10 19:50:25 +01:00
Marian Buschsieweke
f3b9398ed7
tests/gnrc_udp: Fixed typo in Makefile
2019-01-10 13:55:16 +01:00
Sebastian Meiling
7b405058b4
Merge pull request #10640 from kb2ma/tests/nanocoap_infrastructure
...
tests: add nanocoap CLI app for client and server testing
2019-01-10 09:16:42 +01:00
steffen
2ff2b2c1d7
drivers: Initial support for TPS6274x converter
...
drivers/tps6274x: initial support step-down converter
tests/driver_tps6274x: Added testcase for the step-down converter
boards/jiminy-mega256rfr2: Added TPS6274x config
2019-01-10 00:00:02 +01:00
Ken Bannister
ee09936cc5
tests: add CLI app for nanocoap testing
...
Includes both server and client components.
2019-01-08 08:25:04 -05:00
Sebastian Meiling
d06aa5f23f
Merge pull request #10597 from miri64/tests/cleanup/rm-NETOPT_IPV6_IID
...
tests: remove NETOPT_IPV6_IID get() from driver_at86rf2xx test
2019-01-08 09:59:43 +01:00
Kees Bakker
1d5a67dcce
drivers/bh1750fvi: change prototype of bh1750fvi_init
...
The params argument is now a const pointer. This eliminates the need for
a type cast that converts a const to a non-const.
2019-01-07 21:37:02 +01:00
Martine Lenders
b2a261f0c3
tests: remove NETOPT_IPV6_IID get() from driver_at86rf2xx test
2019-01-07 17:09:23 +01:00
Sebastian Meiling
79b051907a
Merge pull request #10706 from keestux/eliminate-cast-at86rf2xx
...
tests/driver_at86rf2xx: eliminate cast
2019-01-07 14:32:16 +01:00
Sebastian Meiling
612469f8ad
Merge pull request #10398 from Josar/pr/xtimer_hang/priority_worker
...
tests/xtimer_drift: increase priority of worker
2019-01-07 10:40:01 +01:00
Kevin "Bear Puncher" Weiss
9554f751d8
Merge pull request #6630 from OTAkeys/pr/cortex-m4f-fpu
...
cortexm_common: add FPU support for cortex-m4f and cortex-m7
2019-01-04 11:56:18 +01:00
Kees Bakker
d909cf3a84
tests/driver_at86rf2xx: eliminate cast
2019-01-03 22:56:15 +01:00
5072acc8b8
Merge pull request #10698 from MrKevinWeiss/pr/fixsetbaudrate
...
tests/periph_uart: fix baudrate truncation
2019-01-03 18:43:36 +01:00
MrKevinWeiss
501b257223
tests/periph_uart: fix baudrate truncation
...
Since some boards an int is 16 bits the atoi truncates values.
This commit using a long instead of an int.
2019-01-03 16:38:33 +01:00
Vincent Dupont
402b60e30c
tests: add thread_float test app
2019-01-03 16:06:30 +01:00
MrKevinWeiss
d2e67261ae
tests/driver_ds1307: Blacklist iotlab boards
...
This states iotlab boards shouldn't run these tests.
This is because the i2c address of L3G4200 is the same ad the ds1307.
This causes an error that thinks the test is valid when it is not.
2019-01-03 14:38:56 +01:00
Kevin "Bear Puncher" Weiss
e4ed9d703d
Merge pull request #10118 from aabadie/pr/tests/sx127x_default_board
...
tests/sx127x: set b-l072z-lrwan1 as default board
2019-01-03 11:35:49 +01:00
José Alamos
f14d46d935
Merge pull request #10242 from miri64/gnrc_ipv6_ext_rh/enh/icmpv6_error_msg
...
gnrc_ipv6_ext_rh: add ICMPv6 error message sending
2019-01-03 10:35:54 +01:00
f90c69cf6e
tests/bench_runtime_coreapis: improve pexpect autotest
2019-01-02 14:22:37 +01:00
4e7bfb65df
tests/bench_runtime_coreapis: globally import testrunner
2019-01-02 14:22:28 +01:00
Martine Lenders
9f51e15889
Merge pull request #10606 from aabadie/pr/tests/posix_semaphore_timeout_margin
...
tests/posix_semaphore: increase timeout margin
2018-12-28 12:10:10 +01:00
Martine Lenders
e13bc4285b
Merge pull request #10191 from fedepell/at_recv_bytes_1
...
drivers/at: add function to read raw data bytes from modem
2018-12-28 12:09:35 +01:00
Sebastian Meiling
cf1a5e0cae
Merge pull request #10396 from Josar/pr/xtimer_hang/periodic_wakeup
...
test/xtimer_hang: use xtimer_periodic_wakeup
2018-12-21 21:18:17 +01:00
Sebastian Meiling
139b5dba3c
Merge pull request #10501 from kb2ma/gcoap/req_path_null
...
net/gcoap: allow NULL path in gcoap_req_init()
2018-12-21 14:36:04 +01:00
Dylan Laduranty
764c7d2cc1
Merge pull request #10069 from fedepell/sam0_flashwrite
...
sam0 flashpage_write: correct translation from RIOT pages to CPU pages writing
2018-12-21 14:17:20 +01:00
Federico Pellegrin
50f2078fcd
tests/periph_flashpage: test_last_raw must erase page before write
2018-12-20 21:18:52 +01:00
Gunar Schorcht
ae3ad4a93f
tests/ccs811: satisfy Codacy
2018-12-20 12:42:44 +01:00
Gunar Schorcht
f03fb32f88
tests/driver_ccs811: fixes for Codacy
2018-12-20 12:42:44 +01:00
8a7edeb193
drivers/ccs811: fix build issues on ARM ( #1 )
...
* drivers/ccs811: fix types in debug messages
* drivers/driver_ccs811_full: fix unused variable build error
2018-12-20 12:42:44 +01:00
Schorcht
4323d9c233
drivers/ccs811: splitted test apps
2018-12-20 12:42:44 +01:00
Schorcht
74e1ab220c
drivers: add driver for CCS811 gas sensor
2018-12-20 12:42:44 +01:00
4878cf2119
Merge pull request #10400 from miri64/core/enh/thread_has_queue_func
...
core: provide function to check msg queue initialization
2018-12-19 18:41:39 +01:00
Martine Lenders
91b526b0ad
tests/gnrc_netif: use thread_has_msg_queue() for msg queue check
2018-12-19 15:39:50 +01:00
Martine Lenders
be5dd81a79
tests/unittests: adapt rpl_srh tests for API change
2018-12-18 19:46:27 +01:00
Francisco Acosta
66911d6ce1
tests/riotboot: add basic automatic test in python
...
Co-authored-by: Federico Pellegrin <fede@evolware.org>
2018-12-18 19:31:35 +01:00
Francisco Acosta
f1c57b21ec
tests: add riotboot bootloader test
...
The tests overrides the target all to be tested by the CI.
All the instructions how to use it are in README.md
The test is successful if the image boots and displays
information about the image and running slot.
Co-authored-by: Federico Pellegrin <fede@evolware.org>
2018-12-18 19:31:35 +01:00
Gaëtan Harter
47830f44c2
Merge pull request #10603 from aabadie/pr/tests/pthread_timeout
...
tests/pthread_condition_variable: increase timeout
2018-12-17 17:57:15 +01:00
Martine Lenders
a3864aa103
Merge pull request #9158 from aabadie/pr/periph/stm32_lpuart
...
cpu/stm32-common: add support for lpuart
2018-12-17 12:16:27 +01:00
bd77949bc7
tests/posix_semaphore: increase timeout margin
...
Otherwise it may break on nrf51 boards where the timeout can be slightly above 100. Using 105us margin seems enough
2018-12-14 22:22:36 +01:00
87dd5f9341
tests/pthread_condition_variable: increase timeout
...
Otherwise it raises a timeout on slow boards. It takes around 2 minutes
on nrf51 based boards (e.g microbit)
2018-12-14 22:05:12 +01:00
Gaëtan Harter
169a72b9a7
Merge pull request #10590 from aabadie/tests/pkg_libcose_timeout
...
tests/pkg_libcose: increase timeout of autotest
2018-12-14 21:05:58 +01:00
Gaëtan Harter
60f3e1af8a
Merge pull request #10591 from aabadie/pr/tests/libfixmath_extend_timeout
...
tests/libfixmath_unittests: extend timeout in autotest
2018-12-14 19:46:44 +01:00
Gaëtan Harter
7b5b778cea
Merge pull request #10602 from aabadie/pr/tests/pkg_micro-ecc_timeout
...
tests/pkg_micro-ecc*: increase expect timeout
2018-12-14 19:28:56 +01:00
dbe43d7515
tests/periph_uart: add periph_lpuart optional dependency
2018-12-13 12:39:00 +01:00
0ea00d932e
tests/pkg_libcose: increase timeout of autotest
...
On a microbit (nrf51) the autotest takes around 4 minutes to complete.
2018-12-13 10:04:30 +01:00
5c4698bfd8
tests/pkg_micro-ecc*: increase expect timeout
...
Otherwise the test takes too long on nrf51 based boards and fails:
- 80s on a microbit for tests/pkg_micro-ecc
- 120s on a microbit for tests/pkg_micro-ecc-with-hwrng
2018-12-13 10:00:51 +01:00
Leandro Lanzieri
4ce63d00ea
Merge pull request #10280 from fedepell/stk3700_arduino
...
boards/common/silabs: add Arduino API support for SiLabs boards
2018-12-12 09:51:13 +01:00
d8d9dd32bf
tests/libfixmath_unittests: extend timeout in autotest
...
It can takes up to 640s to complete on microbit
2018-12-11 14:42:08 +01:00
Hauke Petersen
45698d95fa
tests/events: blacklist boards for insuff. mem
2018-12-11 13:41:21 +01:00
Hauke Petersen
795699fed3
tests/events: use EVENT_QUEUE_INIT
2018-12-11 13:41:21 +01:00
Juan I Carrano
c644110bdb
Merge pull request #10573 from cladmi/pr/tests/compile_tests_in_docker
...
tests: compile-tests should only be executed in building machine
2018-12-10 15:46:23 +01:00
José Alamos
970bec1d1b
Merge pull request #10233 from miri64/gnrc_ipv6/enh/assume-no-preparsed-pkt
...
gnrc_ipv6: assume no preparsed packets
2018-12-10 14:21:17 +01:00
Gaëtan Harter
5a2609c573
Merge pull request #10439 from jcarrano/ensure-value
...
makefile/utils: Add a function for checking that a string is not empty.
2018-12-07 19:17:37 +01:00
Gaëtan Harter
9d252a883e
tests/build_system_utils: add test for build system utilities
...
This will allow testing the build system 'utils' functions.
2018-12-07 18:19:38 +01:00
Gaëtan Harter
58bcde876a
tests/cortexm_common_ldscript: only execute compile-tests in docker
...
Without the protection, the host system also tries to execute the tests.
2018-12-07 17:41:57 +01:00
Gaëtan Harter
4dd6eb3e5b
tests/libc_newlib: only execute compile-test in docker
...
Without the protection, the host system also tries to execute the tests.
2018-12-07 17:41:57 +01:00
Gaëtan Harter
aea71dc309
tests/libc_newlib: verify the file exist before testing
...
If the file does not exist, because of concurrency issues, there is no
error. So verify it is there for good measures.
2018-12-07 17:41:57 +01:00
Martine Lenders
2b280f867e
tests/gnrc_ipv6_ext: remove test for parsed packet reception
2018-12-06 16:22:31 +01:00
Hauke Petersen
92fcb4de6a
Merge pull request #10513 from miri64/gnrc_netif/enh/iid-conversion
...
gnrc_netif: add general IID to/from l2addr conversion functions
2018-12-06 15:57:06 +01:00
Martine Lenders
f757376fc6
tests/gnrc_sock_udp: mark arduino-atmega2560 for insufficient memory
2018-12-06 15:39:00 +01:00
Gaëtan Harter
1bc0bbb1a8
tests/xtimer_usleep: disable running test on native
...
The test randomly fails for unrelated PRs. Expecting real-time timing on
native is not really possible. Maybe it could be fixed but it currently
triggers many false positive.
2018-12-05 17:32:53 +01:00
Gaëtan Harter
1e7d72dea9
tests/xtimer_now64_continuity: disable running test on native
...
The test randomly fails for unrelated PRs. Expecting real-time timing on
native is not really possible. Maybe it could be fixed but it currently
triggers many false positive.
2018-12-05 17:31:12 +01:00
3e8c113c59
tests/periph_eeprom: cleanup + add auto tests for clear and set
2018-12-04 11:25:08 +01:00
f1d3d206c9
tests/periph_eeprom: add set command in shell
2018-12-04 11:24:57 +01:00
c95c1e4def
tests/periph_eeprom: add clear and erase commands
2018-12-04 11:24:57 +01:00
90db0bf253
Merge pull request #10253 from kYc0o/pr/riot_hdr
...
sys: add riotboot_hdr module
2018-12-04 09:44:45 +01:00
1de4ae743a
tests: exclude nrf51dk from big tests
2018-12-04 08:37:00 +01:00
Francisco Acosta
ffb1ba6e47
tests: add riotboot_hdr test
...
Unittest for riotboot_hdr submodule. If successful, it must
print 4 successful tests.
2018-12-04 00:01:42 +01:00
Martine Lenders
0c09a9ad8b
Merge pull request #10538 from smlng/pr/embunit
...
tests: adapt embunit TEST_ASSERT_EQUAL_STRING
2018-12-03 16:59:06 +01:00
Sebastian Meiling
a638b6c1ba
tests: verify embunit TEST_ASSERT_EQUAL_STRING
2018-12-03 15:44:02 +01:00
Kevin "Bear Puncher" Weiss
f05852290a
Merge pull request #9236 from bergzand/pr/crypto/poly1305
...
crypto: Poly1305 implementation
2018-12-03 14:31:28 +01:00
Peter Kietzmann
c83493728a
Merge pull request #10435 from leandrolanzieri/pr/boards/sodaq_sara_r410m
...
boards/sodaq-sara-aff: Initial support
2018-12-03 14:11:34 +01:00
Marian Buschsieweke
003c04bd4c
Merge pull request #10012 from gschorcht/drivers_sht3x
...
drivers: sht3x temperature and humidity sensor
2018-12-03 10:43:16 +01:00
Leandro Lanzieri
d53fbb0045
boards/sodaq-sara-aff: Initial support
2018-12-03 10:05:37 +01:00
d5c527161d
test/crypto: Add tests for poly1305
...
Tests are based on the tests vectors provided in RFC 7539
2018-12-03 09:31:10 +01:00
Joakim Nohlgård
36e5b8ef23
usb-kw41z: NXP USB-KW41Z wireless IoT USB dongle
2018-12-01 13:51:55 +01:00
Sebastian Meiling
43d39b7a33
Merge pull request #8333 from samkumar/feature-condition-variable
...
core: condition variable implementation
2018-11-30 21:15:53 +01:00
Sam Kumar
fb8edbb610
core: condition variable implementation
2018-11-30 11:22:07 -08:00
Federico Pellegrin
e34d46e096
drivers/at: add function to read raw data bytes from modem
2018-11-30 14:59:00 +01:00
Juan I Carrano
77c9cc4041
Merge pull request #10219 from bergzand/pr/crypt/helper_add_wipe
...
crypto/helper: Add secure wipe function
2018-11-30 11:32:45 +01:00
b59bfd5554
Merge pull request #10505 from miri64/gnrc_mac/fix/header-includes
...
gnrc_mac: fix header includes
2018-11-29 22:02:46 +01:00
Sebastian Meiling
7913811a0f
tests: board specific TIMER_SPEED in periph_timer
...
By default the periph_timer tests wants to init all timers with 1MHz,
which is not suitable for all timers, e.g. the atmega timers cannot
run at that speed to make the test work they need to be set to 250kHz.
2018-11-29 16:25:06 +01:00
Sebastian Meiling
739cb85830
tests: add README.md for periph_timer
...
Moving test description from code to a separate README.md file to reduce
binary size to make the test fit on an arduino-uno.
2018-11-29 16:24:51 +01:00
Kevin "Bear Puncher" Weiss
153759b926
Merge pull request #10498 from smlng/pr/adapt/7542
...
atmega: add periph_pwm (taken from #7542 )
2018-11-29 15:54:51 +01:00
Martine Lenders
9d6a32b551
gnrc_mac: fix header includes
...
The inclusion of `net/gnrc.h` in `net/gnrc/mac/types.h` header makes it
impossible to include the `net/gnrc/netif.h` header within
`net/gnrc/netif/hdr.h`, due to `net/gnrc/mac/types.h` being included
with `net/gnrc/netif/mac.h` (which is included in `net/gnrc/netif.h`)
2018-11-29 12:39:34 +01:00
Victor Arino
8ff8aefb72
boards/arduino-atmega-common: support for PWM
2018-11-29 08:50:56 +01:00
Ken Bannister
ffa0c5b03c
tests/gcoap: test NULL path in gcoap_req_init()
2018-11-28 13:26:04 -05:00
f9eebce43f
tests/qdsa: Move from unittests to regular tests
...
Stack size is changed from 4 times the default + printf to 5 times the
default stack size. Only on the lpc2387 this reduces the resulting stack
space. the test is not rerun for the lpc2387 and is untested.
2018-11-28 14:37:37 +01:00
Martine Lenders
85b9be71da
Merge pull request #10188 from smlng/pr/tests/pkg_cn-cbor
...
tests/cn-cbor: move from unittests to regular test
2018-11-27 23:51:11 +01:00
smlng
7b0a7db286
tests/cn-cbor: move from unittests to regular test
...
This moves tests for the cn-cbor package from unittests to a regular
test, which should help to decrease binary size of unittests.
2018-11-27 22:17:05 +01:00
smlng
618fd16699
tests/relic: move from unittests to regular test
...
This moves tests for the relic package from unittests to a regular
test, which should help to decrease binary size of unittests.
2018-11-27 20:41:26 +01:00
Juan I Carrano
050e06f20f
Merge pull request #10376 from cladmi/pr/crypto/ccm/const_input
...
crypto/modes/ccm: update api to const input buffers
2018-11-27 15:33:00 +01:00
Hauke Petersen
b603c298ef
Merge pull request #9156 from kb2ma/gcoap/use_opt_add_api
...
net/gcoap: Use nanocoap pkt/options API
2018-11-26 11:20:27 +01:00
Ken Bannister
424a01ddc1
net/gcoap: remove gcoap attributes from coap_pkt_t
2018-11-24 07:09:25 -05:00
Ken Bannister
f8e5b3dee3
net/gcoap: update tests for nanocoap options API
2018-11-24 07:09:25 -05:00
José Alamos
396f53c2a1
Merge pull request #10300 from miri64/tests/enh/gnrc_rpl_srh_unittests
...
unittests/tests-rpl_srh: various improvements
2018-11-23 13:48:16 +01:00
Martine Lenders
78164977d8
Merge pull request #10223 from kb2ma/nanocoap/string_opt_first_char
...
net/nanocoap: fix string option separator write handling
2018-11-22 16:43:45 +01:00
Ken Bannister
fa77929cc7
net/nanocoap: fix string option separator handling
...
Assumed initial character was a separator when writing the option,
and skipped over it.
2018-11-22 09:25:05 -05:00
José Alamos
1cb780ea26
Merge pull request #10447 from miri64/gnrc_pktbuf/feat/merge
...
gnrc_pktbuf: add gnrc_pktbuf_merge()
2018-11-22 13:58:14 +01:00
Tobias Heider
b4f7259a93
tests: add gnrc_pktbuf_merge() unittests
2018-11-22 11:13:33 +01:00
Schorcht
00cb786344
tests: add SHT3X sensor driver test application
2018-11-21 09:07:20 +01:00
1279697f9f
tests/driver_mma8x5x: adapt README with type param removal
2018-11-20 10:42:14 +01:00
Martine Lenders
a63dec8074
unittests/gnrc_rpl_srh: make test constructor static
2018-11-20 09:32:32 +01:00
Gaëtan Harter
5c426f0fc9
tests-crypto-modes-ccm: change test inputs to const
...
Do required changes to have test inputs as const buffers.
2018-11-19 16:44:04 +01:00
Gaëtan Harter
3ca51d8b5d
tests-crypto/test-crypto.h: update api to const input buffers
...
Input buffers are not modified, so can be declared const arguments.
This will allow using `const` inputs for `modes/ccm` tests.
2018-11-19 16:44:04 +01:00
Gaëtan Harter
c87fe94ec1
crypto/modes/ccm: update api to const input buffers
...
Input buffers are not modified, so can be declared const arguments.
2018-11-19 16:44:04 +01:00
Kevin "Bear Puncher" Weiss
c7894d2bfc
Merge pull request #10385 from PeterKietzmann/pr_tests_puf_args
...
tests/puf_sram: add input args to automation script
2018-11-19 09:54:48 +01:00
ZetaR60
1b1d7b8b91
Merge pull request #10411 from cladmi/pr/eepreg/remove_features_required
...
tests/eepreg: remove duplicate FEATURES_REQUIRED
2018-11-17 15:18:45 -05:00
Martine Lenders
a0067b925d
tests/unittests: provide tests for gnrc_pkt_len_upto()
2018-11-16 15:51:36 +01:00
Gaëtan Harter
195d51b92a
tests/eepreg: remove duplicate FEATURES_REQUIRED
...
The dependency from eepreg to FEATURES_REQUIRED is already defined in
`sys/Makefile.dep` so should not need to be duplicated in the
application Makefile.
2018-11-16 12:07:00 +01:00
josar
ccbb294f9d
tests/xtimer_drift: increase priority of worker
...
When the slacker threads and the worker thread have the same priority
the drift and jitter depend on the workload.
Timer set before the worker thread will be fired before the worker and so
the result is not the timings the system might reach when proper priority
is set. Increasing the priority of the worker thread ensures that the
measureed timings are the achievable timings.
2018-11-15 12:36:02 +01:00
josar
82d126158e
test/xtimer_hang: use xtimer_periodic_wakeup
...
When sleeping in the main function with xtimer_sleep not every percentage
will be printed as the sleep duration and the processing time added do
not result in full percentage values.
Using xtimer_periodic_wakeup ensures that every integer percentage is printed.
2018-11-15 12:14:09 +01:00
PeterKietzmann
0de38c2a6f
tests/puf_sram: add input args to automation script
2018-11-14 13:34:41 +01:00
Gaëtan Harter
147390c209
tests/ccm: add test for auth_data_len upper value
...
Maximal supported value is 0xFEFF.
2018-11-12 16:38:45 +01:00
Federico Pellegrin
994999132a
boards/common/silabs: add Arduino API support for SiLabs boards
2018-11-08 17:03:19 +01:00
730286903a
crypto/helper: Add test for crypto_secure_wipe
...
The test added for crypto_secure_wipe wipes a buffer with a secret in
it. Only the last byte is kept as it was. The last byte is used to check
that the function doesn't write outside the supplied buffer.
2018-11-07 18:27:10 +01:00
Cenk Gündoğan
df9e25353b
test: trickle: fix condition for success
...
The current test implementation wrongly assumes that the diff between
two fired events (e1, e2) must always increase. That is not true, as
event e1 may reside on the upper part of [I/2, I) and e2 on the lower
part of [I, 2*I).
This commit fixes the test to look at the actual time that was randonmly
chosen from both intervals (t1, t2). Given that the intervals are
doubled, t1 must always be smaller than t2.
2018-11-05 16:58:54 +01:00
Francisco Acosta
dd3ca90e8a
examples, tests: add memory insufficient arduino boards
...
The unification of a bigger stack for the atmega platforms
makes some boards to not have enough memory to provide
the big stack plus the application code.
It is possible though, to override the stack size to a
smaller amount if running the test is necessary.
2018-11-02 17:57:13 +01:00
MichelRottleuthner
1606e16879
Merge pull request #10174 from Josar/pr/xtimer_hang/debug_pins
...
test/xtimer_hang: DEBUG_PINS
2018-11-01 10:20:06 +01:00
josar
162d17c5a2
test/xtimer_hang: DEBUG_PINS
...
Add the option to use debug pins to investigate timing issues.
2018-10-31 12:41:43 +01:00
Cenk Gündoğan
f30d0a68d8
Merge pull request #10305 from jia200x/pr/fix_my9221_test
...
tests/driver_my9221: fix for loop indexes
2018-10-31 11:59:14 +01:00
Jose Alamos
b543f2dc67
tests/driver_my9221: fix for loop indexes
2018-10-31 10:59:51 +01:00
Emmanuel Baccelli
365d82ed09
Merge pull request #9829 from OTAkeys/pr/uuid_string
...
uuid: add uuid_to_string() and uuid_from_string()
2018-10-30 14:30:47 +01:00
Martine Lenders
17738d7dd4
unittests/tests-rpl_srh: rename to tests-gnrc_rpl_srh
2018-10-30 12:41:45 +01:00
Martine Lenders
fb4689290d
unittests/tests-rpl_srh: add failure tests
2018-10-30 12:41:40 +01:00
Martine Lenders
c7b90aab81
unittests/tests-rpl_srh: factor-out pointer initialization
2018-10-30 12:26:15 +01:00
Martine Lenders
54a8caf0cd
unittests/tests-rpl_srh: reorder stack vars where appropriately
...
Also make constants static const ;-).
2018-10-30 12:16:38 +01:00
Martine Lenders
e56c6188ae
unittests/tests-rpl_srh: move buffers out of function context
...
Things like this already lead to problems in other unittests, so move
them out of the stack.
2018-10-30 12:14:47 +01:00
Joakim Nohlgård
21efb20184
Merge pull request #9725 from miri64/tests/enh/pkg_cmsis-dsp-testscript
...
tests/pkg_cmsis-dsp: provide testscript
2018-10-27 02:39:32 +02:00
Martine Lenders
d6ea335bfc
unittests: add tests for gnrc_pktbuf_reverse_snips()
2018-10-25 23:11:33 +02:00
Martine Lenders
959e4491fa
Merge pull request #9702 from maribu/phydat_fit
...
sys/phydat: New phydat_fit API
2018-10-25 19:16:54 +02:00
Martine Lenders
466bc341a6
Merge pull request #10231 from miri64/gnrc_ipv6_ext/enh/move-rh-to-gnrc
...
gnrc_ipv6_ext: move ipv6_ext_rh (partly) to GNRC
2018-10-25 19:15:22 +02:00
danpetry
99ae495226
Merge pull request #10011 from leandrolanzieri/pr/drivers/ds18
...
drivers/ds18: Add Maxim Integrated 1-Wire temperature sensor driver
2018-10-25 17:26:10 +02:00
Gaëtan Harter
c5deac4865
Merge pull request #10023 from miri64/gnrc_netif/fix/no-addr-but-addr-len
...
gnrc_netif: Fix l2addr_len > 0, but no l2addr edge-case
2018-10-25 14:31:32 +02:00
Martine Lenders
390ddfba7c
tests/unittests: adapt for value name changes
2018-10-25 14:02:46 +02:00
Gaëtan Harter
40187e81fa
Merge pull request #10184 from bergzand/pr/tests/tweetnacl_move
...
tests/tweetnacl: Move from unittests to regular test
2018-10-25 12:27:16 +02:00
José Alamos
059ef5c437
Merge pull request #10201 from MrKevinWeiss/pr/tests/fixlibfixmath
...
tests/libfixmath: Add delay at start of test
2018-10-25 11:06:37 +02:00
MrKevinWeiss
646c6d67c0
tests/libfixmath: Add delay at start of test
...
The delay allows allows time for the `make term` to connect and start flushing the output buffer before the buffer overflows.
2018-10-24 17:27:30 +02:00
137e4825ed
tests/tweetnacl: Move from unittests to regular test
...
Stack size is changed from 4 times the default + printf to 5 times the
default stack size. Only on the lpc2387 this reduces the resulting stack
space. the test is not rerun for the lpc2387 and is untested.
Tests are disable for the Arduino. While they "might" work, it takes
around 8 minutes to complete the tests.
2018-10-24 16:56:32 +02:00
Frits Kuipers
8b8790c18f
drivers/ds18: Add Maxim Integrated ds18 driver
...
tests/driver_ds18: Add test application for DS18B20 sensor.
tests/driver_ds18: Add whitelist of boards
2018-10-24 16:02:05 +02:00
José Alamos
ea219c3eba
Merge pull request #10217 from cladmi/pr/tests/heatshrink/ci
...
tests/pkg_heatshrink: re-enable CI test
2018-10-24 13:56:16 +02:00
Marian Buschsieweke
fe46cae00d
sys/phydat: New phydat_fit API
...
The current phydat_fit implementation the following limitations:
- The API is way more complicated to use than needed
- It doesn't perform any rounding
- It uses `long` in a place where actual width (or better range) of the type
is pretty important.
This commit addresses these limitations and uses lookup-tables to reduce the
number of divisions required.
Before this commit code using it looked like this:
``` C
long values[] = { 100000, 2000000, 30000000 };
phydat_t dat = { .scale = 42, .unit = UNIT_V };
phydat_fit(&dat, values[0], 0, phydat_fit(&dat, values[1], 1, phydat_fit(&dat, values[2], 2, 0)));
```
Now it can be used like this:
``` C
int32_t values[] = { 100000, 2000000, 30000000 };
phydat_t dat = { .unit = UNIT_V, .scale = 42 };
phydat_fit(&dat, values, 3);
```
2018-10-24 13:05:51 +02:00
Gaëtan Harter
f160a75aa5
Merge pull request #10209 from bergzand/pr/pkg/hacl_move
...
tests/hacl: Move from unittests to regular test
2018-10-23 18:32:27 +02:00
Martine Lenders
3068fb8aed
Merge pull request #9034 from cladmi/pr/tests/pkg_micro-ecc/blacklist/wsn430
...
tests/pkg_micro-ecc: blacklist wsn430 boards
2018-10-23 18:17:44 +02:00
052fea24aa
tests/hacl: Move from unittests to regular test
2018-10-23 17:46:13 +02:00
fd7a05e635
tests: Add test for fletcher multipart functions
2018-10-23 17:35:58 +02:00
danpetry
6fcb9ad552
tests/tsl4531x: Add tests to cover API changes.
...
The changes to the test correspond to the change in the API and design
of the driver, as described in the previous commit and in tsl4531x.h.
2018-10-23 17:26:28 +02:00
Juan Carrano
b99bd67efd
tests/driver_tsl4531x: Add tests for illuminance sensor.
...
Missing README.
2018-10-23 17:26:28 +02:00
Gaëtan Harter
4157a07152
tests/external_module_dir: test for EXTERNAL_MODULE_DIRS
...
It demonstrates:
* Adding a module with source code
* Setting a header include directory
* Adding dependences, which are evaluated before other modules dependencies
If the application compiles, everything is ok.
2018-10-23 13:22:25 +02:00
Gaëtan Harter
69225e6add
tests/pkg_micro-ecc: blacklist 16bits boards
...
Test breaks on wsn430 boards with the node rebooting.
This must come becauso `micro-ecc` does not have 16b support.
I also blacklisted the other 16bits boards.
* https://github.com/kmackay/micro-ecc/issues/96
2018-10-22 14:28:44 +02:00
cladmi
d23fea6043
tests/pkg_heatshrink: re-enable CI test
...
When moved out of `unittests` running test on CI was not re-enabled.
2018-10-21 19:31:25 +02:00
aedc5260d8
Merge pull request #9848 from ZetaR60/RIOT_eepreg2
...
sys/eepreg: EEPROM registration support (version 2)
2018-10-21 11:20:53 +02:00
Matthew Blue
a99361e0b6
tests/eepreg: Initial test support
2018-10-20 09:30:41 -04:00
smlng
24032ac9ae
tests/heatshrink: move from unittests to regular test
...
This moves tests for the heatshrink package from unittests to a regular
test, which should help to decrease binary size of unittests.
2018-10-19 15:18:16 +02:00
Martine Lenders
ed1eb8ed9c
Merge pull request #10183 from bergzand/pr/tests/libcose_move
...
tests/libcose: Move from unittests to regular test
2018-10-18 15:16:20 +02:00
José Alamos
372a729e21
Merge pull request #10070 from OTAkeys/pr/bump_littlefs_version
...
pkg/littlefs: bump version to v1.6.2
2018-10-18 14:35:55 +02:00
PeterKietzmann
d3e34b4334
sys/ecc: add repetition code
2018-10-18 13:37:21 +02:00
03e2eca813
tests/libcose: Move from unittests to regular test
2018-10-18 11:43:18 +02:00
Martine Lenders
179f17ca42
Merge pull request #9989 from PeterKietzmann/pr_add_golay
...
sys/ecc: add golay(24,12) half rate code
2018-10-18 09:31:17 +02:00
PeterKietzmann
9768995a0b
sys/ecc: add golay(24,12) ECC
2018-10-18 09:05:28 +02:00
910b088094
Merge pull request #10172 from miri64/tests/fix/lwip_sock_array_address
...
tests/lwip_sock_{i,ud}p: correctly get array address
2018-10-17 20:36:33 +02:00
Martine Lenders
98c63e4995
tests: provide tests for reception on sock with port 0
2018-10-17 20:27:48 +02:00
8b2d295ab6
Merge pull request #10107 from miri64/tests/fix/lwip-sock-stack
...
tests/lwip_sock_*: Stop main thread from overflowing
2018-10-17 20:26:31 +02:00
Martine Lenders
bf8ebbac81
tests/lwip_sock_{i,ud}p: correctly get array address
...
We want the address of the start of the array.
2018-10-17 11:43:11 +02:00
917548f37c
Merge pull request #10170 from fedepell/arduino_tests_1
...
tests/arduino: add automatic test for arduino module
2018-10-17 09:15:20 +02:00
Martine Lenders
a291facbd7
tests/lwip_sock_tcp: make non-static end-point consts static
2018-10-16 19:09:24 +02:00
Martine Lenders
f6964c1065
tests/lwip_sock_tcp: make IPv4 address byteorder static
2018-10-16 19:09:23 +02:00
Martine Lenders
4934df3112
tests/lwip_sock_ip: make non-static consts static
2018-10-16 19:09:23 +02:00
Martine Lenders
73ec2ac652
tests/lwip_sock_ip: make IPv4 address byteorder static
2018-10-16 19:09:23 +02:00
Martine Lenders
6789a0b246
tests/lwip_sock_udp: make non-static consts static
2018-10-16 19:09:23 +02:00
Martine Lenders
a5370ff6df
tests/lwip_sock_udp: make IPv4 address byteorder static
2018-10-16 19:09:23 +02:00
