19212: shell/rtc: use rtc_tm_normalize() to sanitize input r=benpicco a=benpicco
19360: gcoap: make use coap_build_reply() in gcoap_resp_init() r=benpicco a=benpicco
19401: shell/cmds: add genfile command r=benpicco a=benpicco
19645: sys/isrpipe: Replace xtimer with ztimer_usec r=benpicco a=MrKevinWeiss
### Contribution description
Getting ready for the xtimer dep.
### Testing procedure
Green murdock, there is no explicit test for isrpipe but since it runs xtimer compat it should operate the same.
### Issues/PRs references
19720: tests: remove unnecessary use of floating point r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: MrKevinWeiss <weiss.kevin604@gmail.com>
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
19693: sys/color: extend unittest and fix module r=maribu a=kfessel
### Contribution description
this extends the unittest for sys_color testing more colors
### Testing procedure
```
RIOT_tree/tests/unittests$ make tests-color test
```
will fail since our `rgb2hsv` implementation is wrong (or is using an other colorspace than hsv2rgb (without documenting))
the new `hsv2rgb` test will succeed
### Issues/PRs references
#19614 was the reason i had a look at this
#1315 added the rgb2hsv and hsv2rgb function
#9940 added the test for black special case
https://www.vagrearg.org/content/hsvrgb << some optimization for that function (avoiding float)
Co-authored-by: Karl Fessel <karl.fessel@ovgu.de>
19686: sys/string_utils: add memchk() r=maribu a=benpicco
19687: tests/unittests: remove old workaround for SAML1X and gcc9.X bug r=maribu a=dylad
### Contribution description
This reverts #13462, this workaround is no longer needed with newer GCC version.
### Testing procedure
Try to compile tests/unittests for `saml11-xpro` or `saml10-xpro`
### Issues/PRs references
This is a revert of #13462.
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
19610: drivers/periph/rtc: improve doc on rtc_set_alarm r=maribu a=maribu
### Contribution description
- point out behavior on denormalized time stamps
- use errno codes to indicate errors (and adapt the few instances of actual error handling to use them)
19670: cpu/stm32: stm32f4 BRR from BSRR r=maribu a=kfessel
### Contribution description
sometimes one wants to save one instruction :)
just write the bits we need to write.
### Testing procedure
tests/periph/gpio_ll tests this
### Issues/PRs references
`@maribu` might know some reference
maybe #19407
19678: gnrc_sixlowpan_iphc: fix NULL pointer dereference r=maribu a=miri64
19679: gnrc_sixlowpan_frag_sfr: fix ARQ scheduler race-condition r=maribu a=miri64
19680: gnrc_sixlowpan_frag_rb: fix OOB write in _rbuf_add r=maribu a=miri64
19681: sys/xtimer: improve documentation r=maribu a=maribu
### Contribution description
- Add a warning that xtimer is deprecated, so that new code hopefully starts using ztimer
- Add a hint that `ztimer_xtimer_compat` can be used even after `xtimer` is gone
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Karl Fessel <karl.fessel@ovgu.de>
Co-authored-by: Martine Lenders <m.lenders@fu-berlin.de>
- Add a deprecation note to xtimer, so that new code hopefully
starts using ztimer
- Add a hint that `ztimer_xtimer_compat` can be used even after `xtimer`
is gone
19268: shell_lock: don't set CONFIG_SHELL_SHUTDOWN_ON_EXIT r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
19601: SUIT: Prepared manifests r=chrysn a=chrysn
### Contribution description
While SUIT can generally be used already with manifests that are "dropped into memory" (by any mechanism), the convenient SUIT worker thread mechanism so far could not be used with it.
This adds the suit_worker_try_prepare / suit_worker_trigger_prepared
pair for using the SUIT worker, and breaks suit_handle_manifest_buf out
of suit_handle_url (where the latter now calls the former).
#### By-catch
As part of factoring out reaping of the zombie worker thread, a locking
error that deadlocks the SUIT worker in case the race between the mutex
being unlocked and the thread being reaped hits the necessary handling
code is fixed (and mutex_unlock is called in the error path).
### Testing procedure
SUIT tests should pass.
https://github.com/RIOT-OS/RIOT/pull/19659 provides a demo of how the new API is used.
### Issues/PRs references
I think that the currently employed mechanism of having a resource to which a URL with the manifest gets posted is contrary to the design goals of SUIT -- the signed manifest should be what justifies the device to spend resources (eg. get data from a server), not a URI that is just *not* signed.
This PR makes it easier to implement a resource to which the manifest can be POSTed, rather than a CoAP URI that represents the manifest, as is proposed (but not mature) in
https://github.com/RIOT-OS/RIOT/pull/19659.
[edit: Adjusted to reflect decisions made during review]
Co-authored-by: chrysn <chrysn@fsfe.org>
This adds the suit_worker_try_prepare / suit_worker_trigger_prepared
pair for using the SUIT worker, and breaks suit_handle_manifest_buf out
of suit_handle_url (where the latter now calls the former).
As part of factoring out reaping of the zombie worker thread, a locking
error that deadlocks the SUIT worker in case the race between the mutex
being unlocked and the thread being reaped hits the necessary handling
code is fixed (and mutex_unlock is called in the error path).
19658: sys/posix/sockets: fix code style & set sin6_scope_id in _ep_to_sockaddr() r=benpicco a=maribu
### Contribution description
- Fix double indent of switch cases to single indent, as per coding convention. (Whitespace only change.)
- Set sin6_scope_id to netif in `_ep_to_sockaddr()`
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
19618: cpu/stm32: fix riotboot settings for L4 and WB r=benpicco a=gschorcht
### Contribution description
This PR fixes the `riotboot` configuration for L4 and WB.
The family is not called `stm32l4` or `stm32wb` but `l4` and `wb`. That is, the `riotboot` configuration didn't work at all. Furthermore, a minimum `RIOTBOOT_LEN` of `0x2000` is required for L4.
Found when investigating the compilation errors for `bootloaders/riotboot_serial` in PR #19576.
### Testing procedure
1. Green CI.
2. Use the following commands:
```
BOARD=nucleo-l496zg make -C tests/riotboot info-debug-variable-RIOTBOOT_HDR_LEN
BOARD=p-nucleo-wb55 make -C tests/riotboot info-debug-variable-RIOTBOOT_HDR_LEN
```
In master these commands give
```
0x400
```
With this PR these commands give
```
0x200
```
as expected.
3. Use the following commands:
```
BOARD=nucleo-l496zg make -C tests/riotboot info-debug-variable-RIOTBOOT_LEN
BOARD=p-nucleo-wb55 make -C tests/riotboot info-debug-variable-RIOTBOOT_LEN
```
In master these commands give
```
0x1000
```
With this PR these commands give
```
0x2000
```
as expected.
### Issues/PRs references
19639: tests/net/gnrc_mac_timeout: add automated test r=aabadie a=aabadie
19644: gnrc_ipv6_nib: include RIO with all subnets in downstream RA r=benpicco a=benpicco
19649: gnrc_sixlowpan_iphc: prefix bits outside context must be zero r=benpicco a=benpicco
19656: gnrc/ipv6_auto_subnets: allow to configure minimal prefix length r=benpicco a=benpicco
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
19335: ipv6/nib: 6LBR should not send RS on their downstream interface r=fabian18 a=fabian18
19581: cpu/samd5x: enable FDPLL1 at 200MHz r=benpicco a=dylad
### Contribution description
This PR allows to use the second FDPLL (the first one is used to generated the 120MHz frequency used by the core and some peripherals). The second FDPLL is setup to run at 200MHz which is the maximum allowed by this MCU.
In fact, I reused the existing function which setup FDPLL0 so it can be used in a generic way for both PLL (since they are the same IP).
I change the way the computation offset (left shift by 5) is done because 200MHz << 5 wouldn't fit inside an `uint32_t` and I wanted to avoid using an `uint64_t` here
Two additional commits are present for a small cleanup and a fix.
This is currently unused in our codebase, so it shouldn't impact this platform too much as the `ONDEMAND` bit is set. the FDPLL will not be running out of the box. But `@gschorcht` might need it pretty soon.
### Testing procedure
This PR can be tested on a `same54-xpro` and an oscilloscope using the following the patch:
```
From 76490845ec72387b24116bdd364a61365c186aa1 Mon Sep 17 00:00:00 2001
From: Dylan Laduranty <dylan.laduranty@mesotic.com>
Date: Thu, 11 May 2023 17:42:16 +0200
Subject: [PATCH] removeme! for debug purpose
Signed-off-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
---
cpu/samd5x/cpu.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/cpu/samd5x/cpu.c b/cpu/samd5x/cpu.c
index f778991a5b..2866c8c9e5 100644
--- a/cpu/samd5x/cpu.c
+++ b/cpu/samd5x/cpu.c
`@@` -220,7 +220,7 `@@` static void fdpll_init(uint8_t idx, uint32_t f_cpu)
}
static void gclk_connect(uint8_t id, uint8_t src, uint32_t flags) {
- GCLK->GENCTRL[id].reg = GCLK_GENCTRL_SRC(src) | GCLK_GENCTRL_GENEN | flags | GCLK_GENCTRL_IDC;
+ GCLK->GENCTRL[id].reg = GCLK_GENCTRL_SRC(src) | GCLK_GENCTRL_GENEN | flags | GCLK_GENCTRL_OE | GCLK_GENCTRL_IDC;
while (GCLK->SYNCBUSY.reg & GCLK_SYNCBUSY_GENCTRL(id)) {}
}
`@@` -384,6 +384,12 `@@` void cpu_init(void)
dma_init();
#endif
+ sam0_gclk_enable(SAM0_GCLK_200MHZ);
+ /* output both FDPLL (GCLK0 and GCLK4) to gpios */
+ gpio_init_mux(GPIO_PIN(PB, 14), GPIO_MUX_M);
+ gpio_init_mux(GPIO_PIN(PB, 10), GPIO_MUX_M);
+ /* PB14 -> EXT2 PB10 -> QSPI SCK */
+
/* initialize stdio prior to periph_init() to allow use of DEBUG() there */
early_init();
--
2.35.3
```
It will output both FDPLLs to PB14 and PB10. Their frequency can then be measured using an oscilloscope.
### Issues/PRs references
None.
19612: pkg/ndn-riot: drop unmaintained pkg r=benpicco a=maribu
### Contribution description
Upstream [1] has seen no activity since 2018, so it safe to assume this is dead. It is reasonable to assume that any users - if there ever were any - have moved on.
Fixes https://github.com/RIOT-OS/RIOT/issues/15638
[1]: https://github.com/named-data-iot/ndn-riot
19643: examples/suit_update: some test fixes r=aabadie a=kaspar030
19655: net/ipv6: make use of clz in ipv6_addr_match_prefix() r=benpicco a=benpicco
Co-authored-by: Fabian Hüßler <fabian.huessler@st.ovgu.de>
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
19611: sys/net/rpl: fix possible NULL dereference r=benpicco a=maribu
### Contribution description
As the title says
19640: core/thread: drop unused thread_arch_t r=benpicco a=maribu
### Contribution description
No architecture makes use of thread_arch_t anymore, so let's drop it.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Rather than setting the correct blk_len, the code only wrote 1 and 0
into the three bytes due to the use of a logic and where a bitwise
and should be used.
The coreclk shell command now prints the CPU frequency in Hz, which
can be useful for boards with RC generated CPU frequency (e.g.
RP2040, FE310, or MPS430Fx1xx MCUs allow this) which may quite a bit
off the target frequency.
19594: sys: drop broken and legacy Mac OS handling r=maribu a=maribu
### Contribution description
This drops special handling for Mac OS (X) `native`, which is not supported anymore anyway and causing issues when building for non-`native` targets on Mac OS.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
This drops special handling for Mac OS (X) `native`, which is not
supported anymore anyway and causing issues when building for
non-`native` targets on Mac OS.
19477: sys /cpp11-compat: remove pseudo anonymous namespaces r=MrKevinWeiss a=kfessel
### Contribution description
remove pseudo anonymous namespaces in favor of defines that are used thoughout the rest of riot
### Testing procedure
cpp test do not fail
### Issues/PRs references
Co-authored-by: Karl Fessel <karl.fessel@ovgu.de>
19368: debug: add DEBUG_BREAKPOINT() macro, set breakpoint on failed assertion r=benpicco a=benpicco
19529: cpu/stm32/periph/dac: optimize setting DAC r=benpicco a=Enoch247
### Contribution description
The current implmentation right shifted the 16 bit value passed into `dac_set()` down to the 12 bits that the DAC is actually capable of. This patch drops the shift and instead writes the 16 bit value to the DAC's left aligned 12 bit wide data holding register.
### Testing procedure
do something like:
``` c
#include "perip/dac.h"
int main(void)
{
dac_set(DAC_LINE(0), 0xffff/2);
return 0;
}
```
- observe DAC's output is half of vref
### Issues/PRs references
- none known
19531: tests/unittests: allow passing `UNIT_TESTS` via env r=benpicco a=kaspar030
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
19523: boards/iotlab-m3: enable l3g4200d_ng r=benpicco a=benpicco
19527: drivers/sdcard_spi: small cleanup r=benpicco a=gschorcht
### Contribution description
This PR provides a small cleanup:
- the copy of `sdcard_spi_params_t` is removed (commit bfc2a51f70)
- the documentation was changed to fit the 100 characters per line. (commit 36f0162b34)
It is not necessary to hold a complete copy `sdcard_spi_params_t` in the device descriptor. Constant parameters can be used directly from ROM instead. This saves 24 bytes of RAM.
### Testing procedure
Use any board with SD Card SPI interface. The driver test should still work, for example:
```
BOARD=esp32-wrover-kit make -j8 -C tests/driver_sdcard_spi flash term
```
```
main(): This is RIOT! (Version: 2023.07-devel-176-g7213c-drivers/sdcard_spi_cleanup)
SD-card spi driver test application
insert SD-card and use 'init' command to set card to spi mode
WARNING: using 'write' or 'copy' commands WILL overwrite data on your sd-card and
almost for sure corrupt existing filesystems, partitions and contained data!
> init
Initializing SD-card at SPI_0...
[OK]
>
```
### Issues/PRs references
19530: sys/xtimer: add missing "modules.h" include to `xtimer.h` r=benpicco a=kaspar030
19532: tests/unittests: tests-core-mbox: add missing `container.h` include r=benpicco a=kaspar030
19533: core: move macros/math.h to core/lib/include/macros r=benpicco a=kaspar030
19535: nanocoap_sock: defuse nanocoap_sock_get() API footgun r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
18620: core: add core_mutex_debug to aid debugging deadlocks r=maribu a=maribu
### Contribution description
Adding `USEMODULE += core_mutex_debug` to your `Makefile` results in
on log messages such as
[mutex] waiting for thread 1 (pc = 0x800024d)
being added whenever `mutex_lock()` blocks. This makes tracing down
deadlocks easier.
### Testing procedure
Run e.g.
```sh
USEMODULE=core_mutex_debug BOARD=nucleo-f767zi make -C tests/mutex_cancel flash test
```
which should provide output such as
```
Welcome to pyterm!
Type '/exit' to exit.
READY
s
[mutex] waiting for thread 1 (pc = 0x8000f35)
START
main(): This is RIOT! (Version: 2022.10-devel-841-g5cc02-core/mutex/debug)
Test Application for mutex_cancel / mutex_lock_cancelable
=========================================================
Test without cancellation: OK
Test early cancellation: OK
Verify no side effects on subsequent calls: [mutex] waiting for thread 1 (pc = 0x800024d)
OK
Test late cancellation: [mutex] waiting for thread 1 (pc = 0x0)
OK
TEST PASSED
```
```sh
$ arm-none-eabi-addr2line -a 0x800024d -e tests/mutex_cancel/bin/nucleo-f767zi/tests_mutex_cancel.elf
0x0800024d
/home/maribu/Repos/software/RIOT/tests/mutex_cancel/main.c:51
```
### Issues/PRs references
Depends on and includes https://github.com/RIOT-OS/RIOT/pull/18619
19296: nanocoap: allow to define CoAP resources as XFA r=maribu a=benpicco
19504: cpu/cc26xx_cc13xx: Fix bogus array-bound warning r=maribu a=maribu
### Contribution description
GCC 12 create a bogus array out of bounds warning as it assumes that because there is special handling for `uart == 0` and `uart == 1`, `uart` can indeed be `1`. There is an `assert(uart < UART_NUMOF)` above that would blow up prior to any out of bounds access.
In any case, optimizing out the special handling of `uart == 1` for when `UART_NUMOF == 1` likely improves the generated code and fixes the warning.
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:88:8: error: array subscript 1 is above array bounds of 'uart_isr_ctx_t[1]' [-Werror=array-bounds]
88 | ctx[uart].rx_cb = rx_cb;
| ~~~^~~~~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:52:23: note: while referencing 'ctx'
52 | static uart_isr_ctx_t ctx[UART_NUMOF];
| ^~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:89:8: error: array subscript 1 is above array bounds of 'uart_isr_ctx_t[1]' [-Werror=array-bounds]
89 | ctx[uart].arg = arg;
| ~~~^~~~~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:52:23: note: while referencing 'ctx'
52 | static uart_isr_ctx_t ctx[UART_NUMOF];
| ^~~
### Testing procedure
The actual change is a pretty obvious one-liner, so that code review and a green CI should be sufficient. If not, running any UART example app without regression should do.
### Issues/PRs references
None
19506: tools/openocd: Fix handling of OPENOCD_CMD_RESET_HALT r=maribu a=maribu
### Contribution description
The OPENOCD_CMD_RESET_HALT was not longer correctly passed to the script. This fixes the issue.
### Testing procedure
Flashing of e.g. the `cc2650-launchpad` with upstream OpenOCD should work again.
### Issues/PRs references
The change was added to https://github.com/RIOT-OS/RIOT/pull/19050 after testing the PR and before merging. I'm not sure if the fix never worked because of this, or if behavior of `target-export-variables` or GNU Make changed.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
19485: sys/shell: Fix missing dependency r=aabadie a=maribu
### Contribution description
The shell commands depend on the shell module being use. This was already the case in KConfig, but was overlooked in the shell's `Makefile.dep`.
In addition, this uncovered that `tests/memarray` had a bogus dependency on shell commands without every using the shell.
### Testing procedure
Ideally binaries should not differ (except for debug section).
### Issues/PRs references
Split out of https://github.com/RIOT-OS/RIOT/pull/19483
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
19488: usbus: remove deprecated USBUS_HANDLER_FLAG_TR_FAIL flag r=gschorcht a=dylad
### Contribution description
This PR removes the deprecated `USBUS_HANDLER_FLAG_TR_FAIL` flag.
### Testing procedure
CI should be enough.
### Issues/PRs references
Was deprecated by #17046
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
The shell_cmds module depends on the shell module. This was correctly
added to KConfig, but the Makefile dependencies missed this one. This
commit adds the missing dep.
19436: cpp11-compat: thread::sleep_for in microseconds r=benpicco a=kfessel
### Contribution description
after reviewing #19369 i found that there is a conversion to nanoseconds just to convert it to microseconds some instrunctions later for ztimer64_usec to handle it this removes one of the conversions (convert once direct to microseconds)
### Testing procedure
run the cpp tests
### Issues/PRs references
#19369
Co-authored-by: Karl Fessel <karl.fessel@ovgu.de>
Use symbol `USBDEV_SET_ADDR_AFTER_STATUS` to determine whether the device address has to be set directly after SETUP stage or after the associated STATUS stage.
This extends support for the GET STATUS requests to support endpoints
and interfaces as recipient. It also adds the SET and CLEAR FEATURE
requests for the endpoints with support to set and clear the halt
condition on an endpoint.
Instead of directly stalling an endpoint, handlers should enable the
halt condition on an usbus endpoint to signal error condition.
This can then be cleared via a CLEAR FEATURE request from the host.
This function should not be called by the driver as USBUS will handle it already. So remove this call to prevent duplication
Signed-off-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
19402: sys/net/gnrc/netif: fixing no global address wait r=benpicco a=jan-mo
### Contribution description
The function `gnrc_netif_ipv6_wait_global_address()` will always return true, even if no global address is attached to the interface.
Currently the function only waits for any message and does not check if it was from the bus or not. So in `msg.content.ptr` is no valid address and therefore it returns true.
I added just the check, if the message is from the bus of any interface and then checking the address. We could also first check if the address in `msg.content.ptr` is valid, but this will just hide the bug. Also the timeout was never checked. It was just assuming that no other message will be received during the wait.
### Testing procedure
Use two devices, one works as a border router and supports the global address, the other will wait for the global address. You can call the function `gnrc_netif_ipv6_wait_global_address()` on the waiting node and see whether it returns true and finds the global address in the given time-range.
19404: sys/trickle: cleanup deps r=benpicco a=MrKevinWeiss
### Contribution description
Cleans the dependencies of the `trickle` module. This removes the deprecated xtimer and models kconfig.
### Testing procedure
Green murdock
### Issues/PRs references
19405: cpu/efm32: pwm_init errors are zeros r=benpicco a=chrysn
### Contribution description
pwm_init is documented to return 0 on errors, and has an unsigned return value.
EFM32's initialization function returned negative values, which through implicit casting become 0xffffffff or 0xfffffffe, which are successful by the documentation.
This makes all the EFM32 error paths return 0 as they should.
Also, it fixes a variable name and the corresponding error message that used to talk of "initiation" (which would be the start of a process) rather than "initialization" (which is a process that is completed before something else can happen).
### Testing procedure
* on stk3700, tests/periph_pwm, run `init 0 0 10 1000` / `set 0 0 500`
* The init used to respond with "The pwm frequency is set to 4294967294", and the set does nothing.
* The init now responds with "Error: device is not <del>initiated</del><ins>initialized</ins>". The set still does nothing, but then one doesn't expect it to any more.
(But really, looking at the patch and the docs should suffice).
### Issues/PRs references
By-catch from testing the Rust wrappers provided by `@remmirad` at https://github.com/RIOT-OS/rust-riot-wrappers/pull/38
Co-authored-by: Jan Mohr <jan.mohr@ml-pa.com>
Co-authored-by: MrKevinWeiss <weiss.kevin604@gmail.com>
Co-authored-by: chrysn <chrysn@fsfe.org>
19392: ztimer: Fix doc on ztimer_remove r=benpicco a=bergzand
### Contribution description
See the subject
### Testing procedure
Read the modified docs
### Issues/PRs references
None
19398: gnrc_ipv6_static_addr: fix build with only static address r=benpicco a=benpicco
19399: drivers/usbdev_synopsys_dwc2: add ESP32x power management r=benpicco a=gschorcht
### Contribution description
This PR adds power management handling for ESP32x SoCs.
### Testing procedure
Use and ESP32-S2 or ESP32-S3 board and flash `tests/periph_pm` using the `stdio_cdc_acm`
```
USEMODULE=stdio_cdc_acm BOARD=esp32s3-devkit make -j8 -C tests/periph_pm flash
```
Connect the terminal to the board and execute command:
```
set_rtc 1 1
```
The console should continue to work after the 1-s light sleep.
### Issues/PRs references
Co-authored-by: Koen Zandberg <koen@bergzand.net>
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19371: sys/usbus: check for the number of required and provided EPs in static configurations r=dylad a=gschorcht
### Contribution description
This PR provides a static check at compile time whether the number of EPs required in a static configuration does not exceed the number of EPs provided by the USB device.
#### Background
In issue #19359 the problem was reported that `usbus_cdc_ecm` didn't work together with `stdio_cdc_acm` on some STM32 boards. The reason for some of the boards was simply that the application tried to allocate more EPs than available and simply ignored this and just didn't work.
#### Solution
Since `auto_init_usb` uses a static configuration with exactly one USBUS stack instance and one USB device, at least in case `auto_init` is used a static check can be carried out to make sure that the number of EPs required by the application doesn't exceed the number of EPs provided by the USB device. For this purpose, each `usbus_*` module defines the number of IN and OUT EPs required by that module. Each USB device driver defines the number of EPs provided by USB device if it differs from the default of 8 EPs. During the auto initialization the total number of required IN and OUT EPs is then compared with the number of EPs provided by the USB device using a static assert.
### Testing procedure
1. Green CI
2. Compilation of
```python
USEMODULE='stdio_cdc_acm' BOARD=nucleo-f439zi make -j8 -C tests/usbus_cdc_ecm
```
should lead to compilation error
```python
sys/auto_init/usb/auto_init_usb.c:81:1: error: static assertion failed: "Number of required IN endpoints exceeded"
_Static_assert(USBUS_EP_IN_REQUIRED_NUMOF <= USBDEV_NUM_ENDPOINTS,
^~~~~~~~~~~~~~
Makefile.base:146: recipe for target 'tests/usbus_cdc_ecm/bin/nucleo-f439zi/auto_init_usbus/auto_init_usb.o' failed
```
while compilation of
```
USEMODULE='stdio_cdc_acm' BOARD=nucleo-f767zi make -j8 -C tests/usbus_cdc_ecm
```
should work.
### Issues/PRs references
Fixes issue #19359 partially.
19382: tests/pkg_nanors: use static allocation r=benpicco a=benpicco
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
19386: usbus/dfu: do not create alt interface if NUM_SLOTS=1 r=benpicco a=dylad
### Contribution description
In some cases, it is really useful to build `riotboot` with `NUM_SLOTS=1`.
When use in combination with `riotboot_dfu`, there is no need to export the second slot if `riotboot` is built with `NUM_SLOTS=1`.
Thus, prevent the alt interface declaration in dfu if `NUM_SLOTS=1` so that only slot0 can be used to flash.
### Testing procedure
Add `NUM_SLOTS=1` to `bootloaders/riotboot_dfu/Makefile`
Flash the riotboot DFU bootloader to any board supported by USBUS:
`make BOARD=xxx -C bootloaders/riotboot_dfu flash`
and run
`dfu-util -l`
With NUM_SLOTS=2 you will get:
```
dfu-util -l
dfu-util 0.11
Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2021 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to http://sourceforge.net/p/dfu-util/tickets/
Found DFU: [1209:7d02] ver=0100, devnum=11, cfg=1, intf=0, path="1-4", alt=1, name="RIOT-OS Slot 1", serial="AB88DCAE80893484"
Found DFU: [1209:7d02] ver=0100, devnum=11, cfg=1, intf=0, path="1-4", alt=0, name="RIOT-OS Slot 0", serial="AB88DCAE80893484"
```
with NUM_SLOTS=1 you will get:
```
dfu-util -l
dfu-util 0.11
Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2021 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to http://sourceforge.net/p/dfu-util/tickets/
Found DFU: [1209:7d02] ver=0100, devnum=14, cfg=1, intf=0, path="1-4", alt=0, name="RIOT-OS Slot 0", serial="AB88DCAE80893484"
```
### Issues/PRs references
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
If riotboot is built with NUM_SLOTS=1, there is no reason to advertise a second slot in the bootloader
Signed-off-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
19383: cord: include gcoap_req_send returning 0 in error r=benpicco a=bergzand
### Contribution description
gcoap_req_send returns 0 if it was unable to send the CoAP request. CoRD did not include that case in the return code checks. This changes CoRD to include it and drop the registration if CoAP could not send the request. The old behaviour made the CoRD thread lock up.
### Testing procedure
- Check with the gcoap API docs.
- I can reliable trigger the issue with a RIOT application including both the `cord_ep_standalone` module and some measurement reported both sending requests to the same application. If at some point the application is shut down, gcoap has all its memo's occupied with the measurement reporting and can't add the CoRD update request. Thus the CoRD update request fails with a zero code and the thread (previously) would lock up.
### Issues/PRs references
None
19385: cpu/stm32/periph/timer: fix clobered IRQ flag r=benpicco a=Enoch247
### Contribution description
From the git commit:
> The STM32 periph_timer driver reads the timer's status flags, then clears them all. It is possible that a timer interrupt could occur between reading the flag and clearing it. This would lead to a lost interrupt.
>
> The timer's status flags can be cleared by software, but can only be set by the hardware. This patch takes advantage of this by only clearing the flags it knows are set. The rest of the flags are set, which doesn't actually change their state.
I had trouble finding anything in ST's datasheet saying that software could not set the timer's status flags, but testing showed that this is how it works in practice. Further, [ST's own HAL ](https://github.com/STMicroelectronics/STM32CubeF4/blob/master/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h#L1258)confirms this. If the hardware didn't work this way, it would be impossible to atomically read-modify-write the flags.
### Testing procedure
I tested by doing the following:
1. `make -C tests/periph_timer BOARD=nucleo-f767zi all flash term`
2. press s
3. press [ENTER]
4. observe test passes
5. `make -C tests/periph_timer_periodic BOARD=nucleo-f767zi all flash term`
6. press s
7. press [ENTER]
8. observe test passes
9. `make -C tests/periph_timer_short_relative_set BOARD=nucleo-f767zi all flash term`
10. press s
11. press [ENTER]
12. observe test passes
### Issues/PRs references
- none known
Co-authored-by: Koen Zandberg <koen@bergzand.net>
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
Since `auto_init_usb` provides a static auto configuration for a single USBUS stack instance using a single USB device, a static assert can be used here to check whether the number of EPs required by the configuration does not exceed the number of EPs provided by the USB device.
gcoap_req_send returns 0 if it was unable to send the CoAP request. CoRD
did not include that case in the return code checks. This changes CoRD
to include it and drop the registration if CoAP could not send the
request. The old behaviour made the CoRD thread lock up.
To be able to check during compilation that the number of endpoints provided by a USB peripheral is not exceeded, each interface class has to define the number of IN and OUT endpoints it requires.
If the number of endpoints is not sufficient for an application, it should not be silently ignored and cause a non-working application. Rather, should cause an assertion as it is a configuration issue.
17086: usbdev: Add dedicated stall functions r=benpicco a=bergzand
### Contribution description
This PR adds dedicated stall functions for usbdev peripherals. Two
functions are added. The first function (usbdev_ep_stall) to enable and
disable the stall condition on generic endpoints. The second function is
a dedicated function to set the stall condition on endpoint zero in both
directions. This status can only be set and should automatically be
cleared by the usbdev implementation (or hardware) after a new setup
request is received from the host.
### Testing procedure
- examples/usbus_minimal should still enumerate correctly on the host side.
- #17085 can be used to demonstrate the ep0_stall function with the `tests/usbus_cdc_acm_stdio/` test
### Issues/PRs references
None
Co-authored-by: Koen Zandberg <koen@bergzand.net>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19365: bootloaders: fix bootloader button logic r=benpicco a=dylad
### Contribution description
In lastest master, the `BTN_BOOTLOADER_INVERTED` logic doesn't work as expected.
This PR fixes the underlying logic by replacing the `BTN_BOOTLOADER_INVERTED` macro definition by a runtime function.
In fact the current code:
```
#ifndef BTN_BOOTLOADER_INVERTED
#if (BTN0_MODE == GPIO_IN_PD)
#define BTN_BOOTLOADER_INVERTED false
#else
#define BTN_BOOTLOADER_INVERTED true
#endif
#endif
```
cannot work because both `BTN0_MODE` and `GPIO_IN_PD` are not known by the precompiler as they are enum values defined at cpu level.
Thus, replaces it by a runtime function in our bootloader applications.
I've also add `GPIO_OD_PU` along side `GPIO_IN_PU` and add a new define (which can be override at board level or app level) in case an external pullup is used.
### Testing procedure
Flash the riotboot_dfu bootloader:
`make BOARD=saml21-xpro -C bootloaders/riotboot_dfu flash`
Then, flash any test app:
`PROGRAMMER=dfu-util USEMODULE=usbus_dfu make BOARD=saml21-xpro -C tests/shell riotboot/flash-slot0`
With master, the application will not start.
With this PR, the application will start after flashing.
### Issues/PRs references
Fixes#19364
19366: nanocoap_sock: don't include token in empty ACK response r=benpicco a=benpicco
19367: cord: bump reference from draft to rfc r=benpicco a=bergzand
### Contribution description
The draft is an RFC, this bumps the "see also" in the docs to the rfc.
### Testing procedure
Check that the correct RFC is linked in the docs.
### Issues/PRs references
None
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Koen Zandberg <koen@bergzand.net>
