19346: pkg/tinydtls: allow build for AVR r=benpicco a=benpicco
19512: SUBSYSTEMS.md: add jia200x to subsystems r=benpicco a=jia200x
19513: boards/nrf52840dongle/doc: Update nrfutil pointers r=benpicco a=chrysn
### Contribution description
Nordic changed its nrfutil; this change adjust to it.
I'm not fully happy with recommending that tool at all due to its bad quality (see rambling in https://github.com/RIOT-OS/RIOT/issues/19511), but short of soldering on a debug header or touch-probing it with wires it's the only way in to the device. I may later add follow-up recommendations to switch to riotboot, but this now at least fixes the immediate issue.
### Testing procedure
* Look at the updated documentation.
### Issues/PRs references
Closes: https://github.com/RIOT-OS/RIOT/issues/19511
19514: dist/testbed-support: remove obsolete boards from iotlab archi r=benpicco a=aabadie
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Jose Alamos <jose@alamos.cc>
Co-authored-by: chrysn <chrysn@fsfe.org>
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
18620: core: add core_mutex_debug to aid debugging deadlocks r=maribu a=maribu
### Contribution description
Adding `USEMODULE += core_mutex_debug` to your `Makefile` results in
on log messages such as
[mutex] waiting for thread 1 (pc = 0x800024d)
being added whenever `mutex_lock()` blocks. This makes tracing down
deadlocks easier.
### Testing procedure
Run e.g.
```sh
USEMODULE=core_mutex_debug BOARD=nucleo-f767zi make -C tests/mutex_cancel flash test
```
which should provide output such as
```
Welcome to pyterm!
Type '/exit' to exit.
READY
s
[mutex] waiting for thread 1 (pc = 0x8000f35)
START
main(): This is RIOT! (Version: 2022.10-devel-841-g5cc02-core/mutex/debug)
Test Application for mutex_cancel / mutex_lock_cancelable
=========================================================
Test without cancellation: OK
Test early cancellation: OK
Verify no side effects on subsequent calls: [mutex] waiting for thread 1 (pc = 0x800024d)
OK
Test late cancellation: [mutex] waiting for thread 1 (pc = 0x0)
OK
TEST PASSED
```
```sh
$ arm-none-eabi-addr2line -a 0x800024d -e tests/mutex_cancel/bin/nucleo-f767zi/tests_mutex_cancel.elf
0x0800024d
/home/maribu/Repos/software/RIOT/tests/mutex_cancel/main.c:51
```
### Issues/PRs references
Depends on and includes https://github.com/RIOT-OS/RIOT/pull/18619
19296: nanocoap: allow to define CoAP resources as XFA r=maribu a=benpicco
19504: cpu/cc26xx_cc13xx: Fix bogus array-bound warning r=maribu a=maribu
### Contribution description
GCC 12 create a bogus array out of bounds warning as it assumes that because there is special handling for `uart == 0` and `uart == 1`, `uart` can indeed be `1`. There is an `assert(uart < UART_NUMOF)` above that would blow up prior to any out of bounds access.
In any case, optimizing out the special handling of `uart == 1` for when `UART_NUMOF == 1` likely improves the generated code and fixes the warning.
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:88:8: error: array subscript 1 is above array bounds of 'uart_isr_ctx_t[1]' [-Werror=array-bounds]
88 | ctx[uart].rx_cb = rx_cb;
| ~~~^~~~~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:52:23: note: while referencing 'ctx'
52 | static uart_isr_ctx_t ctx[UART_NUMOF];
| ^~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:89:8: error: array subscript 1 is above array bounds of 'uart_isr_ctx_t[1]' [-Werror=array-bounds]
89 | ctx[uart].arg = arg;
| ~~~^~~~~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:52:23: note: while referencing 'ctx'
52 | static uart_isr_ctx_t ctx[UART_NUMOF];
| ^~~
### Testing procedure
The actual change is a pretty obvious one-liner, so that code review and a green CI should be sufficient. If not, running any UART example app without regression should do.
### Issues/PRs references
None
19506: tools/openocd: Fix handling of OPENOCD_CMD_RESET_HALT r=maribu a=maribu
### Contribution description
The OPENOCD_CMD_RESET_HALT was not longer correctly passed to the script. This fixes the issue.
### Testing procedure
Flashing of e.g. the `cc2650-launchpad` with upstream OpenOCD should work again.
### Issues/PRs references
The change was added to https://github.com/RIOT-OS/RIOT/pull/19050 after testing the PR and before merging. I'm not sure if the fix never worked because of this, or if behavior of `target-export-variables` or GNU Make changed.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
19485: sys/shell: Fix missing dependency r=aabadie a=maribu
### Contribution description
The shell commands depend on the shell module being use. This was already the case in KConfig, but was overlooked in the shell's `Makefile.dep`.
In addition, this uncovered that `tests/memarray` had a bogus dependency on shell commands without every using the shell.
### Testing procedure
Ideally binaries should not differ (except for debug section).
### Issues/PRs references
Split out of https://github.com/RIOT-OS/RIOT/pull/19483
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
19321: examples/gnrc_border_router: add BLE as downlink option r=benpicco a=benpicco
19325: esptools/install.sh: Fix shellcheck issues r=benpicco a=bergzand
### Contribution description
Quote all the things!
### Testing procedure
The script should still work as before
### Issues/PRs references
None
19327: shell/cmds: GNRC: replace puts() with printf() r=benpicco a=benpicco
19328: pkg/u8g2: bump version r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Koen Zandberg <koen@bergzand.net>
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
The telnet example prints a line to the console, but it is not ended
with a newline. When using pyterm, the last line is then never shown as
it reads the console line by line and is waiting for the end of the
line.
This patch swaps use of `printf` for `puts` for the last line printed.
This means the missing newline character gets added. This is also done
to be consistent with the rest of the file, where puts is used whenever
possible instead of printf.
19294: sys/shell: don't include suit command by default r=benpicco a=benpicco
19295: gcoap: Finish the gcoap_get_resource_list_tl -> gcoap_get_resource_list renaming r=benpicco a=chrysn
### Contribution description
In #16688, an argument was added to the `gcoap_get_resource_list` function by creating a new function `gcoap_get_resource_list_tl` with a deprecation and roll-over plan.
This plan has not been acted on so far.
This PR shortens the original plan by just adding the argument to `gcoap_get_resource_list` and removing `gcoap_get_resource_list_tl` in a single go. The rationale for this deviation is that while it's a public API, its only two practical consumers are the (built-in) well-known/core implementation, and the (built-in) CoRE Resource Directory (cord) endpoint. Moreover, a further change to this API (switching over to `coap_block_slicer_t`) is expected to happen within this release cycle, which would take something like 4 total releases to get through otherwise, which is unrealistic for an API that there are no known external users of.
A second commit clean up ToDo items (in the changed function's documentation) that referred to a IETF draft that has long been abandoned by the CoRE WG.
### Testing procedure
Plain inspection and CI passing should suffice.
### AOB
There is a second analogous pair left over from #16688, `gcoap_req_send` / `gcoap_req_send_tl`. As that *is* expected to be used widely, I prefer not to mix these two concerns, and get the present one through without unnecessary hold-up.
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: chrysn <chrysn@fsfe.org>
19256: pkg/tinyusb: add GD32VF103 support r=gschorcht a=gschorcht
### Contribution description
This PR provides the tinyUSB support for GD32VF103 and enables the `tinyusb_device` feature as well as `stdio_tinyusb_cdc_acm` for GD32VF103 boards.
### Testing procedure
```
BOARD=sipeeed-longan-nano make -C tests/shell flash term
```
should work
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
* riot-wrappers:
* Fix infinite loop when using a Mutex
* Make ValueInThread Copy/Clone
* riot-sys:
* Export xxx_DEV (eg. I2C_DEV) C macros as functions
* Add auto_init_utils.h
19193: rust: Update dependencies, use riot-wrappers from git r=benpicco a=chrysn
### Contribution description
As riot-wrappers has advanced a bit since it was last released, Rust modules are switched to using it from git again. (This is a regular ping-pong between testing the latest release in RIOT master, and using released support crates when they're current).
This primarily updates riot-wrappers, which has accumulated several compatible changes. Several other crates receive updates as well.
### Testing procedure
* Green CI
### Issues/PRs references
Changes on the riot-wrappers side:
* https://github.com/RIOT-OS/rust-riot-wrappers/pull/17
* https://github.com/RIOT-OS/rust-riot-wrappers/pull/22
* https://github.com/RIOT-OS/rust-riot-wrappers/pull/29
* https://github.com/RIOT-OS/rust-riot-wrappers/pull/30
[edit: added:]
This also serves to help preparing a 0.8.1 release of riot-wrappers, which performs some deprecations so that a breaking 0.9 change can be done more effortlessly later on.
19214: cpu/gd32v: add periph_spi support r=benpicco a=gschorcht
### Contribution description
This PR provides the `periph_spi` support and is one of a bunch of PRs that complete the peripheral drivers for GD32VF103.
The driver is a modified version of the driver for STM32F1 with some changes that were necessary to get it working on GD32V.
### Testing procedure
`tests/periph_spi` as well as a test with any SPI sensor should work. `tests/driver_sdcard_spi` should work on `sipeed-longan-nano`.
### Issues/PRs references
Depeneds on PR #19216
Co-authored-by: chrysn <chrysn@fsfe.org>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
18477: gnrc_static: add static network configuration r=miri64 a=benpicco
19101: CI: update check-labels-action r=miri64 a=kaspar030
19155: Revert "sys/pm_layered: pm_(un)block add attribute optimize(3)" r=maribu a=Teufelchen1
Revert "sys/pm_layered: pm_(un)block add attribute optimize(3) -shortens hotpath"
This reverts commit 5447203921.
### Contribution description
Compiling `examples/gnrc_networking_mac` using `TOOLCHAIN=llvm` yields the following error:
```
RIOT/sys/pm_layered/pm.c:77:16: error: unknown attribute 'optimize' ignored [-Werror,-Wunknown-attributes]
__attribute__((optimize(3)))
```
As indicated, this is because the attribute `optimize` is GCC only and not present in LLVM.
Compare the manpages of [GCC](https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html) and [LLVM](https://clang.llvm.org/docs/AttributeReference.html).
### Testing procedure
Since this should only affect performance and not behavior, no special testing is needed. I am not aware of any tests in RIOT which could verify that assumption.
### Issues/PRs references
Introduced in #18846
There is another instance of this attribute being used in[ shell_lock.c](6fb340d654/sys/shell_lock/shell_lock.c (L80)). Since the usage is security related, I omit it from this PR.
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
Co-authored-by: Teufelchen1 <bennet.blischke@haw-hamburg.de>
Executing the shell command with an URI-Path that doesn't start with a
slash results in an assertion error while composing the client side
message. This is suboptimal user experience, so add an explicit check
for a valid URI-Path and a dedicated error message.
The space inside the expression made the ifneq always non-equal; the
intended behavior is "if we're using any of these interfaces, or
REUSE_TAP is set".
18962: pkg/lwip: Force loglevel when using log module r=maribu a=yarrick
18999: Paho: Allow building for 8 and 16 bit platforms r=maribu a=OlegHahm
### Contribution description
Providing a patch to Paho upstream which uses fixed size integers (int32_t) instead of plain int whenever it is used to represent a size of an object.
This patch will allow to build the Paho package for platforms where an integer has a width of less than 32 bit.
This patch is also provided as a PR to the upstream version of Paho (https://github.com/eclipse/paho.mqtt.embedded-c/pull/238) but unfortunately the upstream seems to be unmaintained.
### Testing procedure
Build for a 8 or 16 bit platform that has enough memory for the example, e.g., https://api.riot-os.org/group__boards__atxmega-a1u-xpro.html:
BUILD_IN_DOCKER=1 BOARD=atxmega-a1u-xpro make clean all
Without this PR this build will fail, with the patches applied it will succeed.
### Issues/PRs references
This PR makes #18997 obsolete and thus reverts the change.
19034: boards/nucleo-l496zg: doc improvement r=maribu a=krzysztof-cabaj
### Contribution description
This PR adds to nucleo-l496zg documentation MCU table - similar to those, for example for, Nucleo F103RB, F302R8 or F446RE.
### Testing procedure
```
make doc
xdg-open doc/doxygen/html/group__boards__nucleo-l496zg.html
```
### Issues/PRs references
None
Co-authored-by: Erik Ekman <eekman@google.com>
Co-authored-by: Oleg Hahm <oleg@hobbykeller.org>
Co-authored-by: krzysztof-cabaj <kcabaj@gmail.com>
19024: pkg/paho-mqtt: add support for DNS r=aabadie a=benpicco
<!--
The RIOT community cares a lot about code quality.
Therefore, before describing what your contribution is about, we would like
you to make sure that your modifications are compliant with the RIOT
coding conventions, see https://github.com/RIOT-OS/RIOT/blob/master/CODING_CONVENTIONS.md.
-->
### Contribution description
This is pretty straightforward, we only need to hook up `dns_query()`.
Since paho supports both IPv4 and IPv6 we use `AF_UNSPEC` in the query.
This can however give us a A record if we only have IPv6 enabled, so translate the request based on what IP address module is enabled in `dns_query()`.
### Testing procedure
connecting by name works
```
> con test.mosquitto.org 1883
mqtt_example: Connecting to MQTT Broker from test.mosquitto.org 1883
mqtt_example: Trying to connect to test.mosquitto.org , port: 1883
user: clientId: password:
mqtt_example: Connection successfully
```
connecting by IP still works
```
> con 2001:41d0:1:925e::1 1883
mqtt_example: Connecting to MQTT Broker from 2001:41d0:1:925e::1 1883
mqtt_example: Trying to connect to 2001:41d0:1:925e::1 , port: 1883
user: clientId: password:
mqtt_example: Connection successfully
```
<!--
Details steps to test your contribution:
- which test/example to compile for which board and is there a 'test' command
- how to know that it was not working/available in master
- the expected success test output
-->
### Issues/PRs references
<!--
Examples: Fixes#1234. See also #5678. Depends on PR #9876.
Please use keywords (e.g., fixes, resolve) with the links to the issues you
resolved, this way they will be automatically closed when your pull request
is merged. See https://help.github.com/articles/closing-issues-using-keywords/.
-->
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
