This has the following advantages:
- faster and leaner when C11 atomics are not efficient (e.g. on LLVM
this is almost always the case, as LLVM will only use efficient
atomics if it doesn't has to bail out to library calls even for
exotic things)
- Even for GCC e.g. on the nucleo-f429zi this safes 72 B of .text
for examples/filesystem despite runtime checks added for
over- and underflow
- less pain in the ass for C++ and rust users, as both C++ and
c2rust are incompatible with C11 atomics
- adds test for overflow of the open file counter for more robust
operation
- adds `assumes()` so that underflows are detected in non-production
code
In order to properly handle an observe cancellation of a client, the server has to keep track of the notification MIDs (to be able to match an RST to a notification), see [RFC7641, 3.6 Cancellation](https://www.rfc-editor.org/rfc/rfc7641.html#section-3.6) for mor details. An alternative to this would be to make either the client send an explicit observe deregister request, or make the server send the next notification via CON (which hten allows matching of the RST due to the CON state).
This changes the implementation to be solely build upon `endian.h`
and `unaligned.h`.
This turns `byteorder.h` basically in syntactic sugar on top of the
`<endian.h>` API, reducing the complexity of the implementation and,
hence, the maintenance effort.
Note that yields a small ROM reduction as well *yeah!*
```
make BOARD=nrf52840dk RIOT_CI_BUILD=1 BUILD_IN_DOCKER=1 -C tests/unittests
```
Yields before this commit:
```
text data bss dec hex filename
417788 2200 28640 448628 6d874 /data/riotbuild/riotbase/tests/unittests/bin/nrf52840dk/tests_unittests.elf
```
And with this commit:
```
text data bss dec hex filename
417756 2200 28640 448596 6d854 /data/riotbuild/riotbase/tests/unittests/bin/nrf52840dk/tests_unittests.elf
```
* priority_queue_t: Replaced `-1U` literal with PRIORITY_QUEUE_DATA_SIGNALING define
* architecture.h: Added 64-bit
* bloom.h: Fixed typedef for the hashfp_t function pointer
* vfs.h: Increased default vfs buffer sizes for 64 bit
* bytes.h: Check if socklen_t is already defined
* ztimer: Use PRIxPTR format specifier
This removes the static (thread-unsafe) variables from sha256 and
hmac_sha256 to remove a potential footgun. The static variable is only
used when the caller does not supply a pointer to store the digest and
it is returned via the (undocumented) return value.
This commit removes this option and makes the digest argument mandatory.
When riotboot/slot.h is included, but riotboot is not enabled in the
build, a compiler error occures. This is because SLOT0_LEN is not
defined. This patch fixes this by surrounding the offending macrro with
a conditional compile. `riotboot_slot_size()` may still be called, in
which case it returns 0 for the size of any slot given.
The function signature in the Doxygen generated doc was incorrect.
Given that the implementation does have the correct signature, the
impact may not be that large. Still, incorrect doc is confusing, so
let's fix it.
20003: coap: create typedef for CoAP methods r=benpicco a=benpicco
20028: nanocoap: fix incorrect uses of coap_get_code() r=benpicco a=benpicco
20036: boards/nucleo-l4r5zi : add PWM configuration r=benpicco a=krzysztof-cabaj
### Contribution description
This PR adds to the Nucleo-l4r5zi PWM configuration
### Testing procedure
Flash the board using `tests/periph/pwm` program. Check if you could, for example, change LED
intensity using PWM.
### Issues/PRs references
None.
20041: pkg/littlefs2: bump to v2.8.1 r=benpicco a=bergzand
### Contribution description
Minor version number bump.
### Testing procedure
- Check if I copied the correct commit hash.
- Run the tests.
### Issues/PRs references
None
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: krzysztof-cabaj <kcabaj@gmail.com>
Co-authored-by: Koen Zandberg <koen@bergzand.net>
19465: drivers/mtd: use XFA for pointers to defined MTDs r=benpicco a=gschorcht
### Contribution description
This PR provides the support to hold pointers to defined MTDs within a XFA. The XFA allows
- to access MTDs of different types (`mtd_flashpage`, `mtd_sdcard`, `mtd_emulated`, ...) by an index
- to determine the number of MTDs defined in the system.
### Testing procedure
To be defined once PR #19443 is merged because emulated MTDs will allow to test this PR on arbitrary boards.
### Porting Guide
For external boards:
- remove the `MTD_NUMOF` definition from `board.h`
- add `MTD_XFA_ADD(<mtd_dev>, <idx>);` to the definition of `<mtd_dev>`.
- `MTD_0`, `MTD_1`, … defines are no longer needed.
### Issues/PRs references
Related to PR #19443
19981: Fletcher32: Add incremental API r=benpicco a=bergzand
### Contribution description
This PR extends the current fletcher32 checksum with an incremental API mode. This way the bytes to be checksummed can be supplied via multiple successive calls and do not have to be provided in a single consecutive buffer.
I've also rephrased the warning with the original function a bit as that function uses an `unaligned_get_u16` to access the data. The data thus does not require alignment, but the length does need to be supplied as number of 16 bit words.
### Testing procedure
The test has been extended
### Issues/PRs references
None
19995: sys/psa_crypto: Fix macro for public key max size and SE example r=benpicco a=Einhornhool
### Contribution description
#### 1. Wrong public key size when using secure elements, introduced by #19954
Fixed conditions for key size macros in `crypto_sizes.h`.
#### 2. EdDSA and ECDSA examples fail when using a secure element because of unsopported changes introduced by #19954
Updated `example/psa_crypto` to use only supported functions for secure elements.
### Testing procedure
Build `example/psa_crypto` for secure elements and run application
Output on master:
```
2023-10-19 14:33:24,372 # main(): This is RIOT! (Version: 2019.07-devel-22378-gb6772)
2023-10-19 14:33:24,372 # HMAC SHA256 took 56393 us
2023-10-19 14:33:24,372 # Cipher AES 128 took 68826 us
2023-10-19 14:33:24,372 # *** RIOT kernel panic:
2023-10-19 14:33:24,373 # HARD FAULT HANDLER
2023-10-19 14:33:24,373 #
2023-10-19 14:33:24,373 # *** rebooting...
```
Output with fixes:
```
2023-10-19 13:35:24,715 # main(): This is RIOT! (Version: 2019.07-devel-22384-g8ef66-dev/psa-crypto-fixes)
2023-10-19 13:35:24,715 # HMAC SHA256 took 56374 us
2023-10-19 13:35:24,715 # Cipher AES 128 took 68805 us
2023-10-19 13:35:24,715 # ECDSA took 281164 us
2023-10-19 13:35:24,715 # All Done
```
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Koen Zandberg <koen@bergzand.net>
Co-authored-by: Lena Boeckmann <lena.boeckmann@haw-hamburg.de>
19963: sys/event/timeout: add event_timeout_is_pending() r=benpicco a=benpicco
19971: sys/shell/gnrc_netif: Fix a few blockers for sharing ifconfig shell r=benpicco a=yarrick
19974: gnrc_ipv6_ext_frag: _completed: Add comment why list head is not checked for NULL pointer dereference r=benpicco a=miri64
19975: pkg/nanocbor: Bump to latest commit r=benpicco a=bergzand
### Contribution description
Not much to see here
Important changes:
- Add stream-like interface for encoder
- Separate functions for number of items left in arrays and maps
### Testing procedure
The usual test should still work
### Issues/PRs references
None
19976: core: Express -1 as ~0 in thread_status_t cast r=benpicco a=SimonIT
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Erik Ekman <eekman@google.com>
Co-authored-by: Martine Lenders <m.lenders@fu-berlin.de>
Co-authored-by: Koen Zandberg <koen@bergzand.net>
Co-authored-by: SimonIT <simonit.orig@gmail.com>
Router Advertisements are enabled automatically for routing nodes
as soon as they obtain a prefix (e.g. via DHCPv6, UHCP, …).
Enabling router advertisements without a prefix to advertise is
wrong and causes no router solicitations to be send on an upstream
interface.
Also from https://www.rfc-editor.org/rfc/rfc4861#section-6.2.1
Note that AdvSendAdvertisements MUST be FALSE by
default so that a node will not accidentally start
acting as a router unless it is explicitly
configured by system management to send Router
Advertisements.
19539: drivers/periph_sdmmc: define a High-level SDIO/SD/MMC API and low-level SDMMC periperal driver interface r=benpicco a=gschorcht
### Contribution description
This PR provides a SDIO/SD/MMC Device API (SDMMC). It implements a SD host controller driver that provides a high-level functions using a low-level SDIO/SD/MMC peripheral driver for accessing
- MultiMediaCards (MMC) and Embedded MultiMediaCards (eMMC)
- SD Memory Cards (SD Cards) with Standard Capacity (SDSC), High Capacity (SDHC) or Extended Capacity (SDXC).
It supports:
- 1-bit, 4-bit and 8-bit data bus width
- Default Speed and High Speed
- Auto-CLK
The SDIO/SD/MMC device API (SDMMC) is divided into two parts:
1. The high-level API that implements the SD Host Controller driver and allows
- to inititialize and identify different types of cards,
- to access them either blockwise or bytewise,
- to get information about the used card, and
- to send single commands or application specific commands to the card.
2. The low-level SDIO/SD/MMC peripheral driver implements the low-level functions required by the high-level device API. It has to be implemented for each MCU.
### Limitations:
- Only one card per SDIO/SD/MMC device is supported.
- eMMCs specific features are not supported.
- UHS-I, UHS-II and UHS-III are not supported.
### Testing procedure
PR #19540, PR #19760 or PR #19786 is needed to test this PR.
### Issues/PRs references
Prerequisite for PR #19540
Prerequisite for PR #19760
Prerequisite for PR #19786
19815: cpu/sam0_common/periph/sdhc: busy waiting and clock fixes r=benpicco a=benpicco
19860: drivers/ft5x06: fix vendor ID for FT6xx6 and FTxxxx register addresses r=benpicco a=gschorcht
### Contribution description
This PR provides a fix of the vendor ID for FT6xx6 touch panel driver ICs and a fix of register addresses for FTxxxx.
According to the [Application Note for FT6x06 CTPM](https://cdn-shop.adafruit.com/datasheets/FT6x06_AN_public_ver0.1.3.pdf), the vendor ID of FT6x06 touch panel driver ICs is `0x11` instead of `0xcd`. Although there are no information found in the Web about the FT6x36, the FT6336U touch panel of a ESP32-S3 WT32 SC01 Plus is also working with `0x11` as vendor ID so that it seems that FT6x36 is also using `0x11` as vendor ID.
Figured out with a `stm32f723e-disco` board (revision D03). Without this PR, `tests/drivers/ft5x06` gives:
```
+------------Initializing------------+
[ft5x06] init: invalid vendor ID: '0x11' (expected: 0xcd)
[Error] Initialization failed
```
With this PR it works as expected.
```
+------------Initializing------------+
Initialization successful
main(): This is RIOT! (Version: 2023.10-devel-96-gbb9011-drivers/ft5x06_fix_vendor_id)
FT5x06 test application
+------------Initializing------------+
[ft5x06] init: configuring touchscreen interrupt
Initialization successful
1 touch detected
[ft5x06] read gesture_id '0x00'
Touch 1 - X: 151, Y:138
[ft5x06] read gesture_id '0x00'
```
Some background information found in the Web:
- According to the [STM32CubeF7](c20e6dd15b/Drivers/BSP/STM32F723E-Discovery/stm32f723e_discovery_ts.c (L24-L27)) the FRIDA LCD panel mounted on the `stm32f723e-disco` board either uses FT6x36 (prior revision D) or FT3x67 (revision D). However, the FT5x06 driver type for the card is defined as FT6x06, which does not seem correct: bb9011c3fb/boards/stm32f723e-disco/include/board.h (L59)
- According to the [STM32CubeF7](c20e6dd15b/Drivers/BSP/Components/ft6x06/ft6x06.h (L269-L270)), the vendor ID for FT6x36 should be `0xcd`. However, the FT6336U on ESP32-S3 WT32 SC01 Plus works with vendor ID `0x11`.
- The [Adafruit FT6206 library](95118cd983/Adafruit_FT6206.h (L28)) uses `0x11` as vendor id.
- The `stm32l496g-disco` board uses a FT6236 which has vendor ID `0xcd`.
So the information available on the web is confusing. Maybe, a better solution would be to accept `0x11` as well as `0xcd` as vendor ID for FT6xxx touch panels. Unfortunately, there are no documents available on the registers directly from FocalTech 😟 so it seems to be more speculation than knowledge.
### Testing procedure
### Issues/PRs references
19886: cpu/efm32: fix DAC configuration r=benpicco a=gschorcht
### Contribution description
The EFM32 MCU allows the reference voltage to be configured per DAC device, not per DAC channel. Also, the DAC reference voltage was defined in the configuration but not used anywhere.
At the moment we have only defined one board (`stwstk6220a`) that uses the DAC, so changing the configuration interface shouldn't be critical.
### Testing procedure
`tests/periph/dac` should still work for the `stwstk6220a`
```
BOARD=slwstk6220a make -j8 -C tests/periph/dac flash
```
I don't have a `stwstk6220a` board (EFM32 Series 0) so that I can't test it. I could only test it for the `sltb009a` board (EFM32 Series 1) with the change for VDAC in PR #19887.
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
19876: sys/net/ipv4/addr: fix typos r=benpicco a=Enoch247
### Contribution description
This patch fixes some typos in the doxygen doc.
### Testing procedure
Nothing to test. No change to code.
### Issues/PRs references
- None known
19878: makefiles/usb_board_reset.mk: declare term-delay target with test target r=benpicco a=aabadie
19888: boards/sltb009a: complete and fix documentation r=benpicco a=gschorcht
### Contribution description
This PR completes and fixes the documentation which was still in the state as generated automatically by `efm2riot`.
The PR also includes a fix of the configuration of the second UART device that was find out while completing the documentation.
### Testing procedure
Green CI
### Issues/PRs references
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19487: nanocoap: implement extended tokens (RFC 8974) r=benpicco a=benpicco
19808: boards: add ESP32-S3-USB-OTG support r=benpicco a=gschorcht
### Contribution description
This PR provides the support for the [ESP32-S3-USB-OTG](https://docs.espressif.com/projects/espressif-esp-dev-kits/en/latest/esp32s3/esp32-s3-usb-otg/user_guide.html) board.
The SD card can only be used in SPI mode at the moment. As soon as PR #19786 is merged, the SD/MMC support can be enabled and the SD card can then be used in SD mode with 4-bit data bus width.
The display uses uses the ST7789 driver IC that is compatible with the ST7735. For that purpose the ST7735 driver is extended by a pseudomodule definition `st7789` for the ST7789 which is enabled by the board and enables automatically the `st7789` (e57c48a33ee2a869c15603788e5306ba066f91cf). Vise versa, board's `Makefile.dep` enables automatically the `st7789` pseudomodule if the `st7735` is used. The pseudomodule `st7789` is just used to increase the upper limit for supported lines. This change is also part of PR #19807.
~The PR includes a very small documentation fix for ESP32-S3-DevKit board that was noticed during the development of this board definition (1155b6ac1b8efa39d8a0bd7150e602095159fdc1).~
### Testing procedure
The board has been tested with all basic tests for supported hardware including `tests/driver/st3375`:
- [x] tests/drivers/st3375
- [x] tests/periph/gpio
- [x] tests/periph/pwm
- [x] tests/periph/spi
- [x] tests/periph/uart
- [x] tests/sys/usbus_cdc_ecm
### Issues/PRs references
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
RIOT supports two distinct families of the MSP430: The [MSP430 x1xx]
MCU family and the [MSP430 F2xx/G2xx] MCU family. For both incompatible
MCU families the code was located in the msp430fxyz folder, resulting
in case of the UART driver in particularly bizarre code looking roughly
like this:
#ifndef UART_USE_USCI
/* implementation of x1xx peripheral ... */
#else
/* implementation of F2xx/G2xx peripheral ... */
#endif
/* zero shared code between both variants */
This splits the peripheral drivers for USCI and USART serial IP blocks
into separate files and relocates everything in cpu/msp430, similar to
how cpu/stm32 is organized.
[MSP430 x1xx]: https://www.ti.com/lit/ug/slau049f/slau049f.pdf
[MSP430 F2xx/G2xx]: https://www.ti.com/lit/ug/slau144k/slau144k.pdf
