benpicco
5d1bf26f0c
Merge pull request #13076 from gschorcht/boards/esp32/ttgo_t_beam_gps
...
boards/esp32: enable GPS module on ESP32 TTGO T-Beam V1.0
2020-02-01 23:25:55 +01:00
Gunar Schorcht
c30674d539
boards/esp32-ttgo-t-beam: switch on GPS module
2020-02-01 16:12:05 +01:00
Gunar Schorcht
624c6f24ca
boards/esp32: allow board specific initialization
2020-02-01 16:12:05 +01:00
32f4986757
boards/hifive1*: remove useless stdio_uart include
...
stdio_uart is already pulled by default by the dependency resolution
mechanism.
2020-01-31 14:30:32 +01:00
Benjamin Valentin
985d340621
boards/avsextrem: update SPI config
2020-01-31 12:01:09 +01:00
Benjamin Valentin
3ae7bb425b
boards/msba2: update SPI configuration
2020-01-31 12:01:09 +01:00
Dylan Laduranty
d929087e57
Merge pull request #13233 from benpicco/edbg-update
...
tools/edbg: update to latest upstream version
2020-01-31 11:04:23 +01:00
benpicco
cdb427b760
Merge pull request #12475 from francois-berder/wifire-gpio-refactor
...
cpu: mips_pic32_common: Refactor GPIO peripheral
2020-01-31 09:46:57 +01:00
Benjamin Valentin
bd19a55804
boards: remove EDBG_DEVICE_TYPE
...
EDBG_DEVICE_TYPE is a property of the CPU, is should not be set
by every board individually.
2020-01-31 09:35:27 +01:00
Sören Tempel
8485c535d5
waspmote-pro: don't build the boards_common_atmega module
...
Only include its headers. Without this change board_init would be
defined twice. Once in `boards/waspmote-pro/board.c` and the other time
`boards/common/atmega/board.c`.
2020-01-29 12:32:16 +01:00
Francisco Molina
94853d5e1d
boards/iotlab-%: define DEBUG_ADAPTER
2020-01-28 11:56:56 +01:00
Francisco Molina
f79397f7be
boards/iotlab-%: use common openocd config
2020-01-28 11:56:38 +01:00
98995f685b
Merge pull request #13179 from fjmolinas/pr_openocd_stm32f7_probe
...
boards/nucleo-f767zi: add correct flash bank openocd config
2020-01-28 10:48:23 +01:00
Francisco Molina
1dec5ba61b
boards/common/stm32f7: add correct flash bank configuration
...
openocd configuration file for `stm32f7` relies on probing to find out
FLASH_ADDR. On nucleo-f767zi board probing (`flash probe 0`) fails when
`srst` is asserted, but `srst` needs to be asserted to be able to flash
the `BOARD` when sleeping or after a hardfault.
To circumvent this in boards/common/stm32/dist/stm32f7.cfg we define a new
flash bank with the appropriate fash start address and specify that this is
the flash bank to be used as default configuration instead of the
default by setting FLASH_BANK=4
2020-01-27 22:32:06 +01:00
Frits Kuipers
9206b955eb
boards/pinetime: Add pyocd support to pinetime board
2020-01-27 19:43:48 +01:00
benpicco
f6d750afe9
Merge pull request #13201 from gschorcht/boards/nucleo-f4xx-doc-fix
...
boards: doc fix for several nucleo-f4xxxx boards
2020-01-25 15:19:55 +01:00
Gunar Schorcht
6fc82f2b2a
boards: doc fix for several nucleo-f4xxxx boards
...
Rows in markdown tables must not contain a line break. Otherwise the table is broken.
2020-01-25 13:28:15 +01:00
benpicco
43b736969b
Merge pull request #13138 from francois-berder/pic32-docs
...
boards: Improve documentation for pic32-clicker and pic32-wifire
2020-01-24 17:48:43 +01:00
Francois Berder
f4404f2df6
boards: pic32-wifire: Improve documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-01-24 09:49:09 +00:00
Francois Berder
f1e1de5710
boards: pic32-clicker: Improve documentation
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-01-24 09:49:09 +00:00
benpicco
358a2625fc
Merge pull request #13136 from jeandudey/2020_01_15-cc2538dk-resc
...
boards: cc2538dk: remove `machine SetClockSource`.
2020-01-24 10:45:59 +01:00
Marian Buschsieweke
f58b82bd39
Merge pull request #13163 from gschorcht/board/mega-xplained/fix_adc_lines
...
boards/mega-xplained: fix ADC line defintions
2020-01-23 11:34:38 +01:00
Jean Pierre Dudey
a73f3809cc
cpu/cc13x2: rename cc13x2 cpu to cc26x2_cc13x2
...
The CC26x2 and CC13x2 share the same register definitions, and both are
treated equally in the TI's technical reference manual. [1]
- To avoid confusions in the future I renamed it to `cc26x2_cc13x2`.
- Documentation was updated.
- The `cc1312-launchpad` board that uses the `cc13x2` MCU was updated.
- The `cc1352-launchpad` board that uses the `cc13x2` MCU was updated.
[1]: https://www.ti.com/lit/ug/swcu185d/swcu185d.pdf
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-01-20 09:31:48 -05:00
Jean Pierre Dudey
f96fc62369
cc1352-launchpad: fix documentation errors.
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-01-20 08:05:52 -05:00
Jean Pierre Dudey
cc170e9987
cc1352-launchpad: remove export from XDEBUGGER
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-01-20 08:04:54 -05:00
Jean Pierre Dudey
a6117ff0a2
cc1352-launchpad: enable periph_gpio_irq.
...
This feature is supported by the processor.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-01-20 08:04:02 -05:00
97cb4c5707
Merge pull request #13134 from jeandudey/2020_01_15-cc1312-launchpad
...
boards: add cc1312-launchpad board.
2020-01-20 07:39:38 +01:00
Jean Pierre Dudey
633aa8cd41
boards: add cc1312-launchpad board.
...
This is mostly based on the cc1352-launchpad boards, is essentially the same
buttons and leds pins, what changes is the CCXML files used to flash with
`make flash` and the UART pins.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-01-19 11:36:31 -05:00
Gunar Schorcht
f53534ed44
boards/mega-xplained: fix ADC line defintions
...
For the ATmega platform the ADC lines are not defined according to the GPIOs. Instead, they are defined from 0 to ADC_NUMOF-1, which in turn represents the bit in the corresponding ADC registers. The mapping from the line number to the corresponding ADC register/bit combination is done implicitly by the periph/adc implementation.
2020-01-18 13:19:11 +01:00
9ae80f56d1
pinetime: Fix battery ADC line define
2020-01-18 11:15:04 +01:00
c4877c6d41
Merge pull request #13141 from gschorcht/cpu/esp32/fix_c_linkage
...
cpu/esp32: fix C linkage compilation error
2020-01-16 15:06:01 +01:00
Gunar Schorcht
416e8ce8e6
cpu/esp32: fix C linkage compilatio error
...
With the new toolchain version required to fix issue #13133 , the compilation of `examples/posix_socket` fails due to a C linkage error in `atomic_base.h`. The reason is that including `drivers/include/mtd.h` in `boards/esp32/board_common.h` inside the `extern C` block finally leads to including `atomic_base.h` inside the `extern C` block which in turn to the C linkage error for the template definitions in this file.
2020-01-16 13:03:49 +01:00
81dbba2588
boards/pinetime: fix jlink rtt configuration
2020-01-15 22:12:06 +01:00
Martine S. Lenders
78b5c1ee5c
boards: initial import of Adafruit Feather nRF52840 Express
...
This provides support initial support for the [Adafruit Feather nRF52840
Express][feather-nrf52840]. The current feature set includes:
- Default flashing via Segger J-Link
- UART, SPI, and I2C exposed in accordance to the Feather [pinout]
- SAUL support for on-board LEDs and button
[feather-nrf52840]: https://learn.adafruit.com/introducing-the-adafruit-nrf52840-feather/
[pinout]: https://cdn-learn.adafruit.com/assets/assets/000/046/243/original/adafruit_products_Feather_M0_Adalogger_v2.2-1.png
[pid.codes]: http://pid.codes/1209/7D00/
2020-01-15 22:11:58 +01:00
3b4fe41296
Merge pull request #13130 from kaspar030/ili9341_resolution_param
...
drivers/ili9341: add number of lines parameter
2020-01-15 18:33:14 +01:00
Jean Pierre Dudey
94ca53c3b9
boards: cc2538dk: remove machine SetClockSource.
...
It causes errors on current Renode versions. It wasn't documented on the
Renode changelog, but SetClockSource property was removed. Before this
change it showed this error:
There was an error executing command 'machine SetClockSource cpu'
machine does not provide a field, method or property SetClockSource.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-01-15 11:44:02 -05:00
47634addf3
boards/pinetime: configure ili9341 LCD number of lines
2020-01-15 15:36:21 +01:00
76b9cfb677
Merge pull request #12973 from fjmolinas/pr_atmega_tx_isr
...
cpu/atmega_common/periph/uart: use TX_ISR to check TX end
2020-01-15 11:51:22 +01:00
Hauke Petersen
8b408fc828
Merge pull request #12724 from aabadie/pr/stdio_rtt_blacklist
...
make: improve handling of the stdio_rtt module, improve dependency management at application level
2020-01-15 10:12:13 +01:00
Francisco Molina
fb388bf5b6
boards/atmega/include/periph_conf_atmega_common: add USARTn_TX_vect
2020-01-15 10:02:41 +01:00
fcec59261c
Merge pull request #12552 from kaspar030/add_pinetime_support
...
boards: add initial support for the PINE64 PineTime smartwatch
2020-01-15 09:51:40 +01:00
630ff1425a
Merge pull request #13125 from francois-berder/clicker-pic32prog
...
boards: pic32-clicker: Use pic32prog as default programmer
2020-01-15 07:08:31 +01:00
benpicco
2ff710c762
Merge pull request #12669 from benpicco/mcb2388
...
boards: add mcb2388
2020-01-14 22:46:49 +01:00
Benjamin Valentin
9183d16278
boards: add mcb2388
...
The MCB2388 Evaluation Board is a development board for the LPC2388 MCU.
LPC2388 and LPC2387 are very simmilar, the only difference is added USB Host
support.
Since this is not used yet, I chose to just pretend it's an lpc2387.
So far, only the two UARTs, LEDs and LCD display are configured.
2020-01-14 21:21:08 +01:00
5c21df5fee
boards/pinetime: initial support for the PINE64 PineTime smartwatch
2020-01-14 21:06:43 +01:00
Francois Berder
634fea8347
boards: pic32-clicker: Use pic32prog as default programmer
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-01-14 19:43:13 +00:00
8d16ccb96a
Merge pull request #13115 from basilfx/feature/slstk3401a_doc_fixes
...
boards/slstk3401a: update documentation
2020-01-14 17:00:03 +01:00
ef947d3495
Merge pull request #13114 from basilfx/feature/slstk3402a_doc_fixes
...
boards/slstk3402a: update documentation
2020-01-14 16:59:52 +01:00
a1850773ff
Merge pull request #13116 from basilfx/feature/stk3600_docs
...
boards/stk3600: add documentation
2020-01-14 16:00:35 +01:00
f3476452cb
Merge pull request #13117 from basilfx/feature/stk3700_docs
...
boards/stk3700: add documentation
2020-01-14 15:28:27 +01:00
628f085f37
Merge pull request #13118 from basilfx/feature/slwstk6000b_docs
...
boards/slwstk6000b: add documentation
2020-01-14 15:02:49 +01:00
5de5616c92
Merge pull request #13113 from basilfx/feature/sltb001a_doc_fixes
...
boards/sltb001a: update documentation
2020-01-14 15:02:34 +01:00
Martine Lenders
7430ea98ed
Merge pull request #13096 from nmeum/pr/fix_asan_target
...
boards/native: fix all-asan Makefile target
2020-01-14 13:43:22 +01:00
Francisco
f76f7c73ce
Merge pull request #12957 from aabadie/pr/cpu/fe310_spi
...
cpu/fe310: add spi peripheral driver
2020-01-14 10:54:47 +01:00
Bas Stottelaar
4f3083793d
Merge pull request #13099 from basilfx/feature/ikea_tradfri_modules
...
boards/ikea-tradfri: add board documentation.
2020-01-14 10:25:53 +01:00
Francisco
a6cf5cf3f9
Merge pull request #12946 from aabadie/pr/cpu/fe310_i2c
...
cpu/fe310: add i2c peripheral driver
2020-01-14 10:20:11 +01:00
57d5a1db1c
boards: provide stdio_rtt as default module where required
...
For the moment, hamilton, ruuvitag and thingy52 use stdio_rtt by default.
2020-01-14 07:48:08 +01:00
Bas Stottelaar
12ec03d2e0
boards/sltb001a: update documentation
2020-01-13 23:38:43 +01:00
Bas Stottelaar
8f22110210
boards/slstk3402a: update documentation
2020-01-13 23:38:10 +01:00
Bas Stottelaar
488c545674
boards/slstk3401a: update documentation
2020-01-13 23:37:40 +01:00
Bas Stottelaar
52ecf0fcc1
boards/stk3600: add documentation
2020-01-13 23:37:02 +01:00
Bas Stottelaar
b9b8358175
boards/stk3700: add documentation
2020-01-13 23:36:29 +01:00
Bas Stottelaar
aeed1f3153
boards/slwstk6000b: add documentation
2020-01-13 23:31:51 +01:00
Bas Stottelaar
8a98bf5260
boards/ikea-tradfri: add board documentation.
2020-01-13 21:40:00 +01:00
Leandro Lanzieri
50f1b1423a
Merge pull request #12999 from fjmolinas/pr_native_makefile_include_explicit_path
...
boards: use explicit paths for file inclusion
2020-01-13 16:00:48 +01:00
Francisco Molina
74cecf30f0
boards/common/arduino-mkr: remove /Makefile.dep
...
Makefile.dep is already included for the board no need to do it here.
2020-01-13 11:53:48 +01:00
Francisco Molina
5a8f996111
boards: replace use of $(BOARD) by explicit name
...
With the introduction of BOARDSDIR external boards can re-use common
code of BOARDS present in RIOTBASE. To be able to do this file
references may not use $(BOARD) since BOARD will be set by the
external BOARD.
2020-01-13 11:53:48 +01:00
MichelRottleuthner
53cb3b087c
Merge pull request #9530 from Hyungsin/forupstream_xtimer
...
sys: xtimer concurrency/robustness improvement
2020-01-13 08:24:15 +01:00
Sören Tempel
e2b8231796
boards/native: fix crash with all-asan
...
Without this change a RIOT application compiled with all-asan will
segfault as RIOT provides its own malloc by default. Add a define for
disabling custom malloc, calloc and realloc implementations and use it
when compiling with all-asan.
2020-01-12 16:17:48 +01:00
Francois Berder
237f7363fa
boards: pic32-wifire: Do not include vendor header in board header
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-01-11 17:11:35 +00:00
8405fbe611
boards/hifive1*: provide and configure SPI feature
2020-01-11 13:06:39 +01:00
b3658ad95e
boards/hifive1b: provide i2c configuration
2020-01-11 13:06:10 +01:00
Hyungsin
6eed5b9d43
remove XTIMER_OVERHEAD
2020-01-10 13:22:11 -08:00
b42cf186fe
boards/hifive1*: remove gpio interrupt definition
...
This macro is now defined in periph_cpu.h
2020-01-10 16:41:33 +01:00
473f1d7147
boards/hifive1*: cleanup board initialization
2020-01-10 16:41:33 +01:00
97ef5d53de
boards/hifive1*: rework clock configuration
2020-01-10 16:41:33 +01:00
39cf4d38c1
boards/hifive1*: move xtimer definitions to board.h
2020-01-10 16:41:32 +01:00
Yegor Yefremov
8101f52e3f
boards/esp32: add TTGO T-Beam board definition
...
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2020-01-10 10:04:38 +01:00
267e273c56
boards/hifive1b: set custom reset delay of 1s for tests
2020-01-10 08:34:45 +01:00
ce0bb35587
Merge pull request #12993 from fjmolinas/pr_cc2538_rtt
...
cpu/cc2538: add periph_rtt
2020-01-08 09:55:45 +01:00
Francisco Molina
b436ba4a0c
boards/common/remote: add periph_rtt
2020-01-08 09:16:49 +01:00
Francisco Molina
59ada62930
boards/openmote-b: add periph_rtt
2020-01-08 09:16:49 +01:00
748ffff931
boards/nrf52: remove use of export for LINKER_SCRIPT
2020-01-03 16:07:15 +01:00
c71e931d77
boards/native: remove use of export for LINKFLAGS
2020-01-02 09:47:33 +01:00
kcant
3a29d346ef
Relink wiki.stm32duino.com to web.archive.org ( #13011 )
...
wiki.stm32duino.com broken links correction
2019-12-28 18:39:22 +01:00
kcant
f770c6fffd
Update doc.txt
...
Broken links correction to https://web.archive.org/web/20190428082446/ *
2019-12-28 18:38:27 +01:00
dylad
fc9549b069
boards/sam0: update sam0-based board to use hw fc
2019-12-20 21:26:56 +01:00
876824201c
boards/hifive1*: apply new UART configuration scheme
2019-12-20 15:22:09 +01:00
326d570b11
Merge pull request #12990 from fjmolinas/pr_b-l475e-iot01a_assert_srst
...
boards/b-l475e-iot01a: set OPENOCD_RESET_USE_CONNECT_ASSERT_SRST
2019-12-19 15:10:08 +01:00
Francisco Molina
b4a8cf8351
boards/b-l475e-iot01a: set OPENOCD_RESET_USE_CONNECT_ASSERT_SRST
...
b-l475e-iot01a can become unflashable when hardfaults occure.
To make sure flashing succeeds `connect_assert_srst` is called
before connecting to flash through openocd.
2019-12-19 14:21:27 +01:00
Hauke Petersen
3330676fd5
boards/nrf52840dk: disable UART HWFC
2019-12-18 11:53:26 +01:00
Francisco
927b03f0ff
Merge pull request #12902 from aabadie/pr/boards/hifive1b_arduino
...
boards/hifive1b: add arduino feature
2019-12-16 13:31:17 +01:00
0ef371899d
boards/hifive1b: add arduino feature
2019-12-13 16:25:11 +01:00
Hauke Petersen
d0375ea119
boards/native: fix default value of PORT
2019-12-13 11:36:57 +01:00
benpicco
03b95ef833
Merge pull request #12883 from fabian18/microduino-corerf-doc-pin-mapping
...
boards/microduino-corerf: doc SPI and I2C pin mapping
2019-12-05 21:14:05 +01:00
fabian18
f3f4c3b4b8
boards/microduino-corerf: doc SPI and I2C pin mapping
2019-12-05 19:43:35 +01:00
e5d5892167
boards/hifive1*: remove periph_gpio provided features
...
There are now provided at cpu level
2019-12-05 15:27:12 +01:00
Marian Buschsieweke
cf0fb1dff1
Merge pull request #12868 from benpicco/lpc2k-fix
...
lpc2k_pgm: fix build warnings, add lpc2388
2019-12-05 13:02:19 +01:00
Benjamin Valentin
472373637c
boards/microduino-corerf: enable RTT
...
The board *does* have a crystal oscillator connected, so we can
enable RTT.
2019-12-04 22:45:18 +01:00
Benjamin Valentin
e958798225
boards/microduino-corerf: use 115200 baud for stdio
...
The MCU can handle that baud rate just fine.
A standard baud rate is much easier to use than those awkward 57600 baud.
2019-12-04 22:43:41 +01:00
