lpc23xx has 2k of battery RAM that is retained in Deep Power Down mode.
To not overwrite that data it must only be initialized on Power On Reset.
However, RSIR looks the same when waking up from Deep Power Down as it does
on the power-on case.
So use 4 bytes of the backup RAM to keep a signature that is only valid if
memory was retained (no power-on Reset).
A small change to the linker script is required so two sections can be
placed into flash.
The application is mainly to compile-test non-blocking UART
functionality, but some functional testing is also possible.
With non-blocking UART the total runtime of the program is 2100735 µs
on same54-xpro.
With blocking UART the total runtime is 2152407 µs.
The UART peripheral clock seems to be sporadically set to wrong value when the CPU clock is changed. In this case, the UART clock is not set to 115.200 kbps but to 96 kbps, so that the output in the console seems like garbage. This can also cause automatic tests to fail. Therefore, the CPU clock is only changed if CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ defines a different default CPU clock than the one already used at boot time.
The common ADC API dictates that a sample call must return -1 on an
incorrect resolution. The sam0 ADC implementation instead threw an
assertion failure.
- Define test_utils_interactive_sync as DEFAULT_MODULE in Makefile.tests_common
- For tests disabling autoinit, add test_utils_interactive_sync to main
- Add DISABLE_MODULE += test_utils_interactive_sync for tests requiring
sudo, `tests/shell`, `tests/minimal` and `tests/stdin`
- Add shell_commands to tests/periph_wdt and tests/struct_tm_utility to
pull `r` and `s` commands
- Remove includes and usage in `tests/main.c` for tests that where
already using test_utils_interactive_sync
Prevent a possible race condition when _mutex_timeout fires just after the
mutex was locked but before the xtimer was removed
The flow
int xtimer_mutex_lock_timeout(mutex_t *mutex, uint64_t timeout) {
...
mutex_lock(mutex);
/* mutex locked */
/* _mutex_timeout fires and tries to remove thread from mutex queue */
/* DEBUG: simulate callback call between lock and remove */
xtimer_spin(xtimer_ticks_from_usec(timeout*2));
xtimer_remove(&t);
...
}
- Since `printf()` is buffered it might not arrive in a single
read to pexpect. Regex which terminate in a group match might
match only some elements, this might break tests that depend
on exact group matching.
