Benjamin Valentin
db0edd3ec1
drivers/lis2dh12: power mode -> resolution
...
This is easier to understand.
2021-04-23 17:21:04 +02:00
Bas Stottelaar
cc645c083e
Merge pull request #15684 from iosabi/drv_si705x
...
drivers/si70xx: Add support for Si705x sensors
2021-04-21 22:29:01 +02:00
Marian Buschsieweke
855a6fa36a
Merge pull request #16296 from fabian18/nrf24l01p_ng_eui_get
...
drivers/nrf24l01p_ng: add hook nrf24l01p_ng_eui_get()
2021-04-21 13:56:30 +02:00
iosabi
f72efb1daf
drivers/si70xx: Add support for Si705x sensors
...
The Silicon Labs Si705x sensors (Si7050/1/3/4/5) are very similar to the
Si7021 sensors featuring only a temperature sensor and no humidity
sensor. The only difference between the Si705x is the temperature
accuracy of the reading, ranging from +/- 0.1 C in the Si7051 to +/- 1 C
in the Si7050.
This patch adds support for this family of sensors extending the
functionality of the existing si70xx driver. Following the style of
other modules, this implements a pseudomodule per supported chip, adding
si7050, si7051, si7053, si7054 and si7055 pseudomodules.
As a minor change this patch also implements the missing
si70xx_get_serial, si70xx_get_id and si70xx_get_revision functions that
were declared in the si70xx.h header but implemented as private
functions. The si70xx_get_id() may be relevant for the application to
know at run time exactly which version of the hardware is installed.
The updated test running with a Si7051 shows the following output, which
seems consistent with the room temperature conditions during the test.
```
make SI70XX_VARIANT=si7051 -C tests/driver_si70xx/ all flash
```
```
SI70XX temperature and humidity sensor test application
Initializing sensor...
[OK]
Found SI7051 sensor, revision 32
temperature: 24.71 C
temperature: 24.69 C
```
2021-04-17 20:14:35 +00:00
benpicco
fa8057ffbf
Merge pull request #16180 from nicoHarel/drivers/ds3231
...
drivers/ds3231: add alarm support
2021-04-13 13:57:16 +02:00
Fabian Hüßler
f5f2decfa4
nrf24l01p_ng: add hook nrf24l01p_ng_eui_get()
2021-04-09 17:39:40 +02:00
6ee94bdcdf
Merge pull request #16222 from fjmolinas/pr_driver_sgp30
...
driver/sgp30: initial import
2021-04-09 14:00:38 +02:00
Marian Buschsieweke
93ba8bea3b
Merge pull request #16286 from fabian18/cc110x_eui_get
...
drivers/cc110x: add hook cc1xxx_eui_get()
2021-04-08 12:51:46 +02:00
Fabian Hüßler
d8affca746
drivers/cc110x: add weak function cc1xxx_eui_get()
2021-04-08 10:38:16 +02:00
Francisco Molina
478624cbb6
driver/sgp30: initial import
2021-04-08 10:14:30 +02:00
Leandro Lanzieri
e7732d9a00
Merge pull request #16217 from fjmolinas/pr_driver_sm_pwm_01c
...
drivers/sm_pwm_01c: initial import
2021-04-08 09:04:38 +02:00
Francisco Molina
240c016143
drivers/sm_pwm_01c: initial import
2021-04-07 12:05:09 +02:00
Nicolas Harel
c710aff9c6
drivers/ds3231: add alarm support
...
tests/driver_ds3231
drivers/ds3231: add alarm support with IRQ
drivers/ds3231: alarm support and documentation
drivers/ds3231: alarm interrupt with mutex
drivers/ds3231: alarm, _unlock function
fixup! drivers/ds3231: add alarm support
2021-04-06 14:48:31 +02:00
2fb6a11407
drivers/flashrom: remove deprecated flashrom API (since 2017)
2021-04-05 17:06:24 +02:00
0b5b9bd80f
drivers: add implementation for sx126x lora radio
2021-03-30 16:12:39 +02:00
Marian Buschsieweke
1d0ee42046
drivers/at86rf2xx: make TX/RX IRQs read only
...
This brings the implementation in sync with the API.
2021-03-22 08:15:54 +01:00
Marian Buschsieweke
08063bebfe
drivers/at86rf215: make TX/RX IRQs read only
...
This brings the implementation in sync with the API.
2021-03-22 08:15:54 +01:00
Marian Buschsieweke
fba104c2ce
drivers/kw2xrf: make TX/RX IRQs read only
...
This brings the implementation in sync with the API.
2021-03-22 08:15:54 +01:00
Marian Buschsieweke
a18ec987bf
drivers/mrf24j40: make TX/RX IRQs read only
...
This brings the implementation in sync with the API.
2021-03-22 08:15:54 +01:00
Marian Buschsieweke
52c8be9da9
drivers/mrf24j40: drop unused define
...
MRF24J40_OPT_REQ_AUTO_ACK is never used and wrongly documented. Let's
just drop it.
2021-03-22 08:15:53 +01:00
chrysn
3a719c69c7
doc/SAUL: State expectations on blocking and interrupts
2021-03-21 14:35:01 +01:00
Marian Buschsieweke
40859b61f0
drivers/periph_spi: fix Doxygen commands
...
use @retval to document individual return values rather than @return
2021-03-17 10:34:20 +01:00
benpicco
2614831c86
Merge pull request #16137 from maribu/stm32_rtt
...
drivers/periph_rtt: add periph_rtt_set_counter feautre
2021-03-08 16:53:57 +01:00
Francisco
d369dffb4f
Merge pull request #14339 from aabadie/pr/sys/auto_init_screen
...
drivers: sys/auto_init: pkg/lvgl: setup disp_dev, touch_dev and lvgl auto_init
2021-03-04 19:23:32 +01:00
Marian Buschsieweke
b9cb75fedf
drivers/periph/rtt: add periph_rtt_set_counter feature
...
Some periph_rtt implementations do not provide `rtt_set_counter()`. This
adds `periph_rtt_set_counter` as feature to allow testing for its
availability. The feature is provided at CPU level if periph_rtt is
provided by the board for all CPUs implementing `rtt_set_counter()`.
2021-03-04 18:05:06 +01:00
benpicco
753c833109
Merge pull request #15871 from jan-mo/feat/20210120_lis2dh12_extension
...
driver_lis2dh12: functionality extension
2021-03-04 15:20:55 +01:00
Jan Mohr
4598602176
drivers/lis2dh12: functionality extension
2021-03-04 00:43:04 +01:00
c1c9785da1
drivers/usbdev_mock: add to drivers_misc category
2021-03-03 18:09:39 +01:00
d227a117a2
drivers/screen_dev: add a bit of documentation
2021-03-03 18:04:42 +01:00
1362c61abb
drivers/stmpe811: add runtime configurable event callback
2021-03-03 18:00:49 +01:00
528d884b5d
drivers/touch_dev: extend API to set event callback function
2021-03-03 18:00:49 +01:00
0f9693b18f
drivers/touch_dev: add touch driver registry
2021-03-03 18:00:48 +01:00
f4bc980236
drivers/disp_dev: add display driver registry
2021-03-03 18:00:48 +01:00
Jean Pierre Dudey
a30184b5a9
Merge pull request #15896 from maribu/spi-api-cleanup
...
drivers/periph/spi: clean up error codes and doc
2021-02-27 01:09:49 +01:00
Martine Lenders
de4ee0f934
Merge pull request #15562 from benpicco/socket_zep_register
...
socket_zep: register with netdev, provide EUI-64 as command line parameter
2021-02-20 20:32:01 +01:00
Memiks
e6cb7392d7
drivers/bmx280: remove unused parameter spi3w_en #15954
2021-02-16 09:04:08 +09:00
Marian Buschsieweke
acd9f4cc1a
drivers/periph_ptp: fix adjustment API
...
The clock adjustment API only used a 16 bit integer for speed correction. This
is to course grained to allow compensating clock drifts at high accuracy.
Using a 32 bit integer instead would allow to fix for a drift of up to
about 1 nanosecond drift per each 5 seconds.
That ought to be enough for anyone! (*cough* *cough*)
2021-02-10 09:55:52 +01:00
Francisco Molina
85caf7cbc7
drivers/flashpage: add FLASHPAGE_ERASE_STATE definition
2021-02-09 11:11:46 +01:00
benpicco
a5e5ec5215
Merge pull request #15897 from bergzand/pr/riotboot/flashwrite_remove_flashpage_size
...
riotboot/flashwrite: Remove last dependencies on flashpage size
2021-02-01 17:21:09 +01:00
Jens Wetterich
533428448d
drivers/ina3221: Add docs to SAUL group
2021-02-01 14:31:11 +01:00
Jens Wetterich
8dff7b57ad
drivers/ina3221: Fix compatibility with C++
2021-02-01 14:31:11 +01:00
c93c3e46d6
flashpage: Support non uniform flashpage sizes
2021-02-01 14:27:22 +01:00
Marian Buschsieweke
ae79f5fc59
drivers/periph/spi: clean up error codes and doc
...
- Use negative errno as error codes, rather than home-grown enums
- Update the home-grown enum with negative errno codes for backward
compatibility and mark it deprecated
- Update API doc to use negative errno codes
- Fix various style issues in Doxygen doc
- Use `@retval` to document specific return values instead of abusing
`@return` for this
- Align parameters to proper indent level
2021-02-01 11:02:14 +01:00
Benjamin Valentin
e8bbe1d1c7
mtd: re-add mtd_write_page()
...
Add a write_page() command that performs a read-modify-write cycle
if necessary.
2021-01-28 11:51:28 +01:00
Benjamin Valentin
60eb75da3c
mtd: rename mtd_write_page() -> mtd_write_page_raw()
...
The function will not abstract away the behavior of the underlying media
(e.g. whether only 1 -> 0 writes are possible without erase), thus rename it.
2021-01-26 11:48:26 +01:00
Benjamin Valentin
d8918c24fa
socket_zep: register with netdev
2021-01-25 22:59:01 +01:00
Fabian Hüßler
7d618afa17
nrf24l01p_ng: make use of netdev_register()
2021-01-24 20:49:39 +01:00
Fabian Hüßler
063ff60890
drivers/include: add NETDEV_NRF24L01P_NG
2021-01-24 20:49:39 +01:00
fabian18
f7a77ebb04
drivers/nrf24l01p_ng: netdev driver for nrf24l01+
...
The driver uses the netdev interface. Due to the limited
capabilities of the transceiver (32 byte FIFO and no source address in the layer2 frame),
it relies on 6LowPAN compression and adds the source address to the frame for that.
2021-01-24 20:49:39 +01:00
Jean Pierre Dudey
273721efc0
drivers: add bq2429x power management IC driver
...
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2021-01-22 19:30:12 +01:00
0eba27161e
cst816s: Initial include of cst816s touch screen driver
2021-01-14 18:17:51 +01:00
Francisco Molina
960e0c5f43
sys/ieee802154/submac: add handling of invalid CRC frames
2021-01-13 23:42:45 +01:00
ac9d8e603e
drivers/pca9685: fix typo (oscilator => oscillator)
2021-01-08 10:15:33 +01:00
Martine Lenders
640ff4f5d8
Merge pull request #15609 from maribu/ethernet-rx-timestamp
...
sys/net/gnrc/netif/ethernet: Support RX timestamp
2021-01-07 19:53:52 +01:00
Marian Buschsieweke
f6bca70d11
sys/net/gnrc/netif/ethernet: Support RX timestamp
2021-01-06 20:30:14 +01:00
quangphhr
afa723b2f7
drivers/hsc: add driver for honeywell pressure and temperature sensor
2021-01-06 10:22:17 +01:00
Marian Buschsieweke
e5a0154255
Merge pull request #14660 from maribu/netdev_confirm_send
...
drivers/net: Add netdev_driver_t::confirm_send
2021-01-05 16:11:20 +01:00
Marian Buschsieweke
53fcb97b2f
drivers/net: Add netdev_driver_t::confirm_send
...
Changed the API of `netdev_driver_t`:
- The `send()` function should no longer return the number of bytes and should
not block
- The upper layer now must call the new `confirm_send()` function after
calling `send()`; either busy waiting until something different to `-EBUSY`
is returned, or after `NETDEV_EVENT_TX_COMPLETE` was signaled
During transition to the new API, the upper layer must remain backward
compatible and must assume the legacy API if `netdev_driver_t::confirm_send()`
is `NULL`.
2021-01-05 15:34:11 +01:00
Leandro Lanzieri
675ddb6ccc
drivers/pn532: use pseudomodules to select i2c or spi
2021-01-04 16:55:16 +01:00
Jens Wetterich
e36a0d883a
esp_common/esp_now: use netdev_register()
2020-12-23 19:44:57 +01:00
benpicco
770bda165a
Merge pull request #15571 from iosabi/drv_si1133
...
drivers/si1133: New SI1133 UV/IR/Ambient light driver
2020-12-14 08:41:00 +01:00
iosabi
ce76125a22
drivers/si1133: New SI1133 UV/IR/Ambient light driver
...
The SI1133 from Silicon Labs is a UV Index Sensor and Ambient Light
Sensor in a small 2x2 mm DFN package. The sensor can measure
independently ultra violet (UV) light, infra red (IR) light and
ambient light, however the ambient light is also influenced by the
IR light requiring compensation from the IR readings.
The SI1133 is quite different from other Silicon Labs chips in RIOT OS
and therefore needs its own driver. In particular, the SI1133 has 7
different photodiode configurations to read but only 6 channels to
read them in parallel so only some channels can be read each time.
This patch implements a new driver allowing to read the data directly
and a saul interface for the three kinds of light source. There are
many configuration options including interrupts and continous modes
that are left out of this initial driver.
2020-12-14 03:13:23 +00:00
dylad
7cbaa3f890
net/netdev: create SAM0 Ethernet entry in netdev_type_t
2020-12-13 21:41:20 +01:00
chrysn
272c8d29cc
Merge pull request #13908 from benpicco/periph/dac_play
...
drivers/periph_common: dac: add dac_play()
2020-12-11 07:31:44 +01:00
benpicco
1477a340fe
Merge pull request #15150 from fabian18/ieee802154_security
...
Initial implementation of IEEE 802.15.4 security
2020-12-09 14:14:27 +01:00
Akshai M
bfd3a903fb
drivers/rn2xx3 : r/LORAMAC_DEFAULT_AR/CONFIG_RN2XX3_DEFAULT_AR
...
Move 'LORAMAC_DEFAULT_AR' to drivers/rn2xx3 i.e
'RN2XX3_DEFAULT_AR'
Move 'RN2XX3_DEFAULT_AR' to 'CONFIG_' namespace
Co-authored-by: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
2020-12-08 11:33:44 +01:00
Benjamin Valentin
ceb3f8443a
drivers/dac_dds: add module to play sample buffer over a DAC
...
This adds an API function to play a buffer of Audio samples using a DAC.
Double buffered operation is supported by specifying a callback that will
be called when the next buffer can be queued with dac_dds_play().
2020-12-04 23:12:32 +01:00
Fabian Hüßler
1b5bcec554
drivers/netdev: Add IEEE 802.15.4 security
2020-12-04 09:40:55 +01:00
Akshai M
d65a4b3f97
drivers/ili9341 : Update documentation
2020-12-03 14:20:34 +01:00
Akshai M
9f81956e41
drivers/ili9341 : Model 'CONFIG_ILI9341_LE_MODE' as BOOL
2020-12-03 14:20:34 +01:00
Akshai M
a322c6d4c0
drivers/ili9341 : Move 'ILI9341_VCOML' to 'CONFIG_'
2020-12-03 14:20:34 +01:00
Akshai M
d6935cd7bb
drivers/ili9341 : Move 'ILI9341_VCOMH' to 'CONFIG_'
2020-12-03 14:20:34 +01:00
Akshai M
7bb83f9e01
drivers/ili9341 : Move 'ILI9341_GVDD' to 'CONFIG_'
2020-12-03 14:20:34 +01:00
benpicco
a80631a297
Merge pull request #15074 from maribu/ptp-clock
...
drivers/periph/ptp_clock
2020-12-03 09:59:07 +01:00
Marian Buschsieweke
7d1edd51f4
drivers/periph: Added PTP clock API
2020-12-02 17:53:00 +01:00
benpicco
665c07eb53
Merge pull request #15120 from benpicco/driver/at86rf215-trim
...
driver/at86rf215: add functions to configure trim & clock output at run-time
2020-12-02 16:53:02 +01:00
Benjamin Valentin
95d082a2be
driver/at86rf215: add functions to set trim & clock output at run-time
...
To calibrate the at86rf215 radio, trim value has to be set at run-time
during board production.
Add two helper functions to control the trim value and clock output register.
2020-12-02 14:59:17 +01:00
Fabian Hüßler
c526a34770
sx127x: make use of netdev_register()
...
Call netdev_register() in sx127x_setup()
and pass the index in auto_init_sx127x()
and semtech_loramac_init()
2020-12-01 16:34:11 +01:00
Fabian Hüßler
8ca2e09d95
drivers/include: add NETDEV_SX127X
2020-12-01 16:34:06 +01:00
Marian Buschsieweke
56cf30172f
Merge pull request #15532 from fabian18/cc110x_netdev_register
...
drivers/cc110x: use netdev_register
2020-12-01 16:17:37 +01:00
Fabian Hüßler
39adf908ce
cc110x: make use of netdev_register()
...
Call netdev_register() in cc110x_setup()
and pass the index in auto_init_cc110x()
2020-12-01 12:11:20 +01:00
Fabian Hüßler
320b1c4206
drivers/include: add NETDEV_CC110X
2020-12-01 12:06:12 +01:00
Benjamin Valentin
eb199d4c78
netdev: move definition of NETDEV_INDEX_ANY to netdev
2020-12-01 11:55:06 +01:00
benpicco
333fce44b4
Merge pull request #14973 from benpicco/driver/at86rf215-batmon
...
drivers/at86rf215: implement battery monitor, add power bus
2020-12-01 11:52:46 +01:00
Benjamin Valentin
a28a60f16c
cpu/stm32: periph_eth: register with netdev
2020-11-29 23:10:37 +01:00
Francisco
14877443f7
Merge pull request #15494 from gdiribarne/bugfix/sfr04-avr-overflow
...
drivers/srf04: fix overflow on AVR
2020-11-26 11:14:15 +01:00
1d5e2e9cd9
all: remove traces of kernel_types.h
...
Automatically removed using:
$ git grep -l kernel_types | xargs sed -i '/^#include .kernel_types/d'
2020-11-25 17:52:34 +01:00
0b801c4de0
all: adapt to moved sched defines
2020-11-23 16:56:34 +01:00
Gilles Diribarne
5a5c8507d4
drivers/sfr04: Use uncrustify
2020-11-22 23:12:40 +01:00
Gilles Diribarne
caa1ad822d
drivers/sfr04: Fixed int overflow for AVR (arduino board)
2020-11-22 23:03:21 +01:00
benpicco
6cf6b47c27
Merge pull request #15445 from btcven/2020_11_05-gp2y10xx
...
drivers: add gp2y10xx dust sensor
2020-11-18 09:56:03 +01:00
Jean Pierre Dudey
e920a2e645
drivers: add gp2y10xx dust sensor
...
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2020-11-18 09:13:56 +01:00
Hauke Petersen
c4a8c45a3e
periph/rtt: fix tick conversion macros
2020-11-16 10:00:24 +01:00
Benjamin Valentin
f9650bdbc3
drivers/at86rf215: implement Battery Monitor
2020-11-13 22:59:09 +01:00
benpicco
be9eb22bb8
Merge pull request #15106 from chrysn-pull-requests/saul-rgbleds
...
saul_pwm: auto-init'able RGB LEDs and dimmers
2020-11-13 18:22:30 +01:00
benpicco
d9598a0f54
Merge pull request #15412 from bergzand/pr/flashpage/merge_raw
...
periph_flashpage: Make pagewise API optional
2020-11-12 22:32:21 +01:00
41bbaa7442
flashpage: Make pagewise API optional
...
flashpage currently requires pagewise implementation with an optional
extension for per block writes (flashpage_raw). Most implementations
with flashpage_raw implement the pagewise access via the flashpage_raw
functions. This commit makes the flashpage raw the main access method
and adds an extension feature for the pagewise access.
The functions and defines are renamed to reflect this. The API is also
extended with a dedicated function for erasing a sector.
2020-11-11 22:26:33 +01:00
Hauke Petersen
8a31519558
drivers: add support for ds3231 RTC
2020-11-09 15:18:54 +01:00
Francisco
3e3da1217d
Merge pull request #15249 from aabadie/pr/tools/typo
...
tools/codespell: fix new typos and make it fail when typos are found
2020-11-03 15:01:20 +01:00
benpicco
9681c204d6
Merge pull request #14959 from benpicco/at86rf215-mr-fsk
...
drivers/at86rf215: implement MR-FSK
2020-11-03 11:26:24 +01:00
Benjamin Valentin
6f23263503
drivers/at86rf215: implement MR-FSK
2020-11-03 10:51:21 +01:00
Benjamin Valentin
53ca0dd1d0
drivers/mtd_spi_nor: define WP and HOLD pin
...
Hold and WP are not used by the driver, but if they are connected
to the flash they must be driven HIGH to enable writes and not stop
any flash operation.
2020-11-02 21:17:36 +01:00
benpicco
e77d12da26
Merge pull request #15188 from benpicco/drivers/kw41zrf-register
...
drivers/kw41zrf: register with netdev
2020-10-31 14:30:00 +01:00
Marian Buschsieweke
125c892c03
drivers/periph/timer: Use uint32_t for frequency
...
For all currently supported platforms `unsigned long` is 32 bit in width. But
better use `uint32_t` to be safe.
2020-10-30 22:02:12 +01:00
cd3ee9e825
drivers/mii: fix typo 'auto-negotation' => 'auto-negotiation'
2020-10-27 10:33:48 +01:00
Benjamin Valentin
fde3026312
drivers/mtd_spi_nor: prevent data corruption on 'sector erase'
...
There is no difference between 4k erase and sector erase.
But sector erase would previously do `.block_erase` which would not
erase a sector (4k) but a whole block (64k).
Fortunately all boards declare `SPI_NOR_F_SECT_4K` and all file systems
don't try to erase anything smaller, so this was never triggered.
Add an `assert(0)` to crash instead of corrupting data.
2020-10-26 13:48:26 +01:00
Benjamin Valentin
0425325260
drivers/mtd_spi_nor: use single transfer to read JEDEC ID
...
Just read the JEDEC ID with a single SPI transfer, there can only
be 10 banks.
This makes adaption to QSPI much simpler because now flash functions
don't call the SPI API directly anymore.
2020-10-26 13:02:09 +01:00
Bas Stottelaar
26835a949f
drivers/*: remove unused assert.h include
2020-10-22 11:29:27 +02:00
chrysn
d196c7c4a6
drivers/saul/auto_init: Add PWM for LEDs
...
In analogy to the existing GPIO mappings, this provides (write-only)
SAUL entries for PWM'd LEDs in a single-LED (as SAUL_ACT_DIMMER) and an
RGB (as SAUL_ACT_RGB_LED) mode.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
2020-10-17 11:20:17 +02:00
benpicco
4edf5c7cbd
Merge pull request #15208 from benpicco/ieee802154_submac-etx
...
netdev/ieee802154_submac: add retransmission reporting
2020-10-15 14:31:54 +02:00
Benjamin Valentin
37aad4ef38
netdev/ieee802154_submac: add retransmission reporting
...
If we do software retransmissions, we already keep a count.
Allow to query it with `NETOPT_TX_RETRIES_NEEDED`.
2020-10-15 13:26:42 +02:00
Nishchay-sopho
eb1064eef4
drivers/scd30: Add reset function to Sensirion scd30 sensor
2020-10-14 15:07:01 +02:00
Marian Buschsieweke
6294382627
cpu/stm32: Use mii.h for periph_eth
...
Use shared MII definitions and utilities instead own definitions.
2020-10-12 08:46:20 +02:00
Marian Buschsieweke
33d916b237
drivers/mii: Media-Independent Interface utils
...
Add utilities for working with Ethernet Media-Independent Interface for use by
Ethernet drivers.
2020-10-12 08:46:20 +02:00
Benjamin Valentin
b32bc3dbd1
drivers/kw41zrf: register with netdev
2020-10-08 16:19:23 +02:00
Benjamin Valentin
1afe72a5e5
drivers/enc28j60: register with netdev
2020-10-08 10:36:56 +02:00
benpicco
ab37c9fba1
Merge pull request #14949 from benpicco/drivers/mrf24j40-register
...
drivers/mrf24j40: register with netdev
2020-10-08 10:33:37 +02:00
Francisco
3918d714ce
Merge pull request #13624 from wosym/pr/candev_mcp2515
...
tests/candev: add mcp2515 + driver/mcp2515: add driver
2020-10-08 09:45:40 +02:00
Benjamin Valentin
a1d8c79a98
drivers/mrf24j40: pass long address via pointer
2020-10-07 16:39:39 +02:00
Benjamin Valentin
988ee1648f
drivers/mrf24j40: register with netdev
2020-10-07 16:39:39 +02:00
Marian Buschsieweke
5b9463aca1
drivers/netdev: Clarify documentation
2020-10-06 10:48:06 +02:00
Wouter Symons
757f810118
drivers/mcp2515: complete driver + adapt to 2020 RIOT API
2020-10-03 15:20:42 +02:00
Vincent Dupont
62a9929f9b
mcp2515: add a driver for the mcp2515 SPI CAN controller
...
This driver implements the candev interface
2020-10-03 15:20:42 +02:00
feac7dc978
drivers/pir: fix typo 'whan' -> 'when'
2020-10-02 08:06:16 +02:00
dc8d32d30e
drivers/periph/gpio: fix typo 'occured' -> 'occurred'
2020-10-02 08:05:55 +02:00
9236b6ca5c
drivers/ltc4150: fix typo 'tread' -> 'treat'
2020-10-02 08:05:31 +02:00
59297c3779
drivers/lc709203f: fix typo 'Invlid' -> 'Invalid'
2020-10-02 08:05:00 +02:00
5ef55e37d7
drivers/ina3221: fix typos
...
- 'measurment' -> 'measurement'
- 'enble' -> 'enable'
2020-10-02 08:04:23 +02:00
2f2eeb7a7b
drivers/at: fix typo 'correspondant' -> 'correspondent'
2020-10-02 08:03:10 +02:00
benpicco
6cb8da7813
Merge pull request #14950 from jia200x/pr/ieee802154/submac
...
ieee802154_submac: add initial support for common MAC sub layer
2020-10-01 11:31:52 +02:00
Jose Alamos
4bb77b0b2f
netdev/ieee802154_submac: add compatibility layer
2020-09-30 17:25:31 +02:00
benpicco
b2401eb73b
Merge pull request #14966 from HendrikVE/pr/driver/aip31068
...
driver/aip31068: add new driver
2020-09-30 15:52:52 +02:00
Hendrik van Essen
6778bf4b98
driver/aip31068: add new driver
2020-09-29 14:42:15 +02:00
Martine Lenders
cd8666735e
Merge pull request #15107 from benpicco/boards/samr21-xpro_edbg_eui
...
boards/samr21-xpro: fix reading EUI-64 from EDBG on cold boot
2020-09-29 11:04:04 +02:00
Benjamin Valentin
971c03eeb9
drivers/edbg_eui: add note on edbg startup time
2020-09-28 20:18:43 +02:00
7c029c7f43
Merge pull request #14907 from OTAkeys/pr/adcxx1c_get_alert
...
drivers/adcxx1c: add clear alert function
2020-09-28 13:28:15 +02:00
316871a4fa
Merge pull request #15068 from MrKevinWeiss/pr/dev_enum
...
drivers/dev_enums: Remove unused dev_enums.h
2020-09-25 17:35:21 +02:00
MrKevinWeiss
7893158b5a
drivers/dev_enums: Remove unused dev_enums.h
2020-09-24 09:27:39 +02:00
Viktor Gal
7ea8f738fd
Add support for Adafruit Seesaw Soil moisture sensor ( #14835 )
...
drivers/seesaw_soil: Add support for Adafruit Seesaw Soil moisture sensor
2020-09-23 17:35:33 +02:00
chrysn
9295f69da4
Merge pull request #15062 from kaspar030/fix_efm32_16b_timer_set_absolute
...
cpu/efm32/periph/timer: fix timer_set_absolute() in 16bit case
2020-09-23 11:28:00 +02:00
chrysn
d8d56e5e3a
periph/timer: Document that set_absolute is expected to wrap
...
Most timers are implemented this way already, and keeping (documenting)
it that way allows the generic timer_set implementation to stay as
simple as it is.
2020-09-23 10:59:18 +02:00
MrKevinWeiss
cc1c2ab811
drivers/periph: Remove unused timer enum from dev_enums
2020-09-22 16:26:01 +02:00
José Alamos
9c130cd2fd
Merge pull request #15032 from jia200x/pr/at86rf2xx/fix_overflow
...
drivers/at86rf2xx: fix at86rf2xx_set_rxsensitivity
2020-09-17 10:32:06 +02:00
Jose Alamos
074dc8d328
drivers/at86rf2xx: fix at86rf2xx_set_rxsensitivity
2020-09-16 14:47:51 +02:00
Benjamin Valentin
696ddf3dbb
drivers/periph/timer: amend documentation for timer_set_periodic()
...
The function needs the `periph_timer_periodic` feature.
Add a `@note` about that to the documentation.
2020-09-13 19:06:28 +02:00
benpicco
842933855f
Merge pull request #14995 from benpicco/cpu/cc2538-register
...
cc2538_rf: register with netdev
2020-09-11 16:03:08 +02:00
Benjamin Valentin
1811686540
cc2538_rf: register with netdev
2020-09-11 13:33:37 +02:00
Francisco
858533e68e
Merge pull request #14994 from benpicco/nrf802154-register
...
nrf802154: register with netdev
2020-09-11 12:48:40 +02:00
Cenk Gündoğan
0d0bc91553
Merge pull request #14754 from leandrolanzieri/pr/no_archives
...
build system: link object files
2020-09-10 09:36:29 +02:00
Benjamin Valentin
58dc106309
nrf802154: register with netdev
2020-09-10 00:05:25 +02:00
9b9ed236ba
Merge pull request #14916 from MrKevinWeiss/pr/slwstk6220a
...
drivers/periph: Remove UART from device_enums.h
2020-09-09 10:53:27 +02:00
fdaf7fd822
Merge pull request #14596 from benpicco/drivers/at86rf2xx-retries
...
drivers/at86rf2xx: support frame retry reporting on AT86RFR2
2020-09-09 10:27:05 +02:00
MrKevinWeiss
bdeb39576e
drivers/periph: Remove UART from dev_enums.h
2020-09-09 10:25:38 +02:00
Benjamin Valentin
0871b69c84
drivers/at86rf2xx: support frame retry reporting on at86rfr2
...
At86rfr2 doesn't report retries directly, but it can generate a TX start
interrupt for each (re)try, so we can count manually.
2020-09-08 14:48:57 +02:00
Benjamin Valentin
634714ff78
drivers/at86rf215: implement Reduced Power Consumption
...
Reduced Power Consumption is available for MR-O-QPSK and
MR-FSK.
In this mode the receiver will be turned off periodically,
defaulting to a 50% duty cycle.
This reduces power consumption when in IDLE RX by almost 50%
and is therefore enabled by default.
2020-09-07 13:48:47 +02:00
Leandro Lanzieri
16b5fd303b
drivers: add usbdev_mock
2020-09-04 15:01:16 +02:00
Francisco
6f84870c26
Merge pull request #14634 from benpicco/eui_provider
...
net/link_layer: implement EUI provider
2020-09-01 16:26:08 +02:00
benpicco
6f271b7d3e
Merge pull request #14903 from benpicco/drivers/include/periph/rtc-fix
...
drivers/periph_common: RTC: fix doxygen
2020-09-01 15:15:55 +02:00
Vincent Dupont
8526e68b70
drivers/adcxx1c: add clear alert function
2020-08-31 15:53:53 +02:00
Benjamin Valentin
bd57640d5b
drivers/periph_common: RTC: fix doxygen
2020-08-31 14:16:42 +02:00
Gunar Schorcht
147b79169c
drivers/periph/gpio: add comparison functions
...
The expandable GPIO API requires the comparison of structured GPIO types. This means that inline functions must be used instead of direct comparisons. For the migration process, drivers and other modules must first be changed so that they use the inline comparison functions.
2020-08-31 13:10:28 +02:00
Benjamin Valentin
3e8d6388f8
netdev_ieee802154: use eui_provider in netdev_ieee802154_setup()
2020-08-30 23:43:57 +02:00
benpicco
a0bae383d7
Merge pull request #14818 from Nishchay-sopho/drivers/sps30/add_sleep_mode
...
drivers/sps30: Add sleep mode
2020-08-25 23:49:32 +02:00
Nishchay-sopho
a368b0bc36
drivers/sps30: Add sleep mode
2020-08-25 16:20:18 +02:00
9b2aa40e03
Merge pull request #14038 from benpicco/mtd_pagewise
...
mtd: add page addressed operations to allow access > 4GiB on SD cards
2020-08-25 13:10:20 +02:00
Marian Buschsieweke
92ae260617
Merge pull request #14778 from benpicco/sys/luid_netdev
...
sys/luid: add luid_netdev_get_eui48() & luid_netdev_get_eui64()
2020-08-21 21:30:14 +02:00
Benjamin Valentin
d29397cfd8
netdev_ieee802154: add netdev_ieee802154_setup()
2020-08-21 15:33:19 +02:00
6199ada6b5
drivers/sx127x: migrate to ztimer
2020-08-20 13:41:32 +02:00
Benjamin Valentin
02f37b998a
drivers/at24cxxx: export page-wise write function
...
Export the _write_page() function so it can be used by the MTD subsystem.
2020-08-18 17:25:40 +02:00
Benjamin Valentin
7c8fe862ce
drivers/at25xxx: export page-wise write function
...
Export the _write_page() function so it can be used by the MTD subsystem.
2020-08-18 17:25:40 +02:00
Benjamin Valentin
4034f96169
mtd: add page addressed operations
...
Currently read(), write() and erase() all use 32 bit addressing.
This is a problem when writing to media > 4 GiB, e.g. SD cards.
The current implementation would wrap around after 4 GiB and corrupt data.
To avoid this, add functions to the MTD subsystem that allow for page-wise
addressing. This is how most of the underling storage drivers and the
file-systems above work anyway.
In the future we should then deprecate the 32-bit functions if all drivers
are converted.
2020-08-18 17:25:39 +02:00
Benjamin Valentin
1582b105d3
drivers/at86rf2xx: fix typo
2020-08-17 22:53:51 +02:00
Benjamin Valentin
decadc41a0
drivers/dose: register driver with netdev
2020-08-17 22:53:51 +02:00
Benjamin Valentin
4f19b54b7b
drivers/at86rf215: register driver with netdev
2020-08-17 22:53:51 +02:00
Benjamin Valentin
53eedc283b
drivers/at86rf2xx: register driver with netdev
2020-08-17 22:53:51 +02:00
Benjamin Valentin
7ceb3f0a68
netdev: add netdev_register() to keep track if netdev IDs
...
It is desireable to have a way to identify network devices.
This should be independent from the type of netdev, so a common identifier is needed.
Base this on the driver ID and the index in the configuration struct.
This way we achive unique IDs that stay consistent for any firmware flashed on a board.
2020-08-17 22:50:18 +02:00
Nishchay-sopho
3245dee8d8
drivers/sps30: Update units of measurement
2020-08-12 12:50:35 +02:00
Francisco
ad3568be87
Merge pull request #14712 from benpicco/gpio_init_int-clarify
...
periph/gpio: clarify behavior of gpio_irq_enable()
2020-08-11 11:30:05 +02:00
Benjamin Valentin
7543e714c1
drivers/periph_common: RTC: move RIOT_EPOCH to header, document it.
2020-08-07 13:22:19 +02:00
Benjamin Valentin
8c95198cbb
periph/gpio: clarify behavior of gpio_irq_enable()
...
What happens with events that occured after `gpio_irq_disable()` is
currently not defined.
If they are not cleared, they will generate an interrupt on `gpio_irq_enable()`.
This does not seem like the intended behavior, so make the documentation more
explicit.
2020-08-05 17:41:27 +02:00
José Alamos
7967066f51
Merge pull request #14657 from maribu/netdev_doc
...
drivers/net: Fix netdev_driver_t doc
2020-08-04 10:49:24 +02:00
Benjamin Valentin
aa0e5e7afa
drivers/cc110x: replace binary constants and use unsigned char
...
binary constants are a GCC extension
2020-07-31 13:38:03 +02:00
Benjamin Valentin
2e34298265
drivers/nrf24l01p: use unsigned char
2020-07-31 13:38:03 +02:00
Marian Buschsieweke
86513dc97a
drivers/net: Fix netdev_driver_t doc
...
- Fix indent
- Use @reval instead of @return when referring to a single return value
- Use term "frame" instead of "packet"
2020-07-30 20:22:17 +02:00
4b4e9830b0
drivers/touch_dev: clarify touch position coordinates origin
2020-07-29 14:49:17 +02:00
388bbfa008
drivers: add generic screen wrapper around display and touch devices
2020-07-29 14:30:03 +02:00
benpicco
7acdecb1df
Merge pull request #14447 from Nishchay-sopho/drivers/scd30
...
driver/scd30 : Add driver for scd30 sensor
2020-07-28 12:41:58 +02:00
benpicco
ecab75b529
Merge pull request #13632 from benpicco/cpu/sam0_common/uart-deinit
...
drivers/periph/uart: add periph_uart_reconfigure feature & implementation for sam0
2020-07-28 11:12:19 +02:00
nagrawal
900e4b61dc
driver/scd30: Add driver for Sensirion SCD30
...
Created tests for Sensirion scd30 driver
Moved Makefile.dep and Makefile.include as per new spec
2020-07-28 10:38:01 +02:00
Benjamin Valentin
3eb54179ae
drivers/periph/uart: add periph_uart_reconfigure feature
2020-07-28 10:10:15 +02:00
Benjamin Valentin
7af8a3e2d3
drivers/periph/timer: add note about TIM_FLAG_RESET_ON_MATCH
2020-07-27 17:17:08 +02:00
Francisco
d187e83221
Merge pull request #14570 from fjmolinas/pr_fix_mock_rtt_defs
...
drivers/rtt: override RTT_MAX_VALUE and RTT_FREQUENCY for mock
2020-07-22 16:33:29 +02:00
Francisco Molina
9dde6ec53d
drivers/rtt: overrite RTT_MAX_VALUE and RTT_FREQUENCY for mock
...
mock_rtt relies on setting mock values for RTT_MAX_VALUE and
RTT_FREQUENCY. Platforms with a rtt will already define these
values which leads to mock_rtt working with different values than
rtt_rtc.
This commit changes the ifdef logic so that when using mock_rtt
RTT_MAX_VALUE and RTT_FREQUENCY are redefined.
2020-07-22 08:52:54 +02:00
Akshai M
60170971bd
net/l2filter : Update documentation
2020-07-22 00:26:09 +05:30
Akshai M
caab4cd8c5
net/l2filter : Move 'L2FILTER_LISTSIZE' to 'CONFIG_'
2020-07-22 00:26:09 +05:30
Hendrik van Essen
9d068d582a
drivers/pca9633: make enum anonymous
2020-07-17 15:05:32 +02:00
Benjamin Valentin
b080d3da7a
drivers/soft_uart: implement inverted TX & RX
...
In the current implementation, RX is flank based, so it's entirely level
agnostic.
I still chose to include a SOFT_UART_FLAG_INVERT_RX flag for symmetry and
to allow for a possible future, sampling based implementation.
2020-07-14 23:04:36 +02:00
Benjamin Valentin
96c67b0fa5
drivers/soft_uart: add software based UART implementation
2020-07-14 22:51:59 +02:00
Francisco
325b7a8d8e
Merge pull request #13631 from benpicco/cpu/sam0_common/spi-deinit
...
drivers/periph/spi: add periph_spi_reconfigure feature & implementation for sam0
2020-06-30 15:34:53 +02:00
Leandro Lanzieri
955efd85ff
drivers/at: Add at_urc_isr module to process URCs upon arrival
2020-06-30 11:41:13 +02:00
benpicco
a92dac5701
Merge pull request #14329 from Nishchay-sopho/drivers/sdp3x
...
driver/sdp3x : Add driver for sdp3x sensor
2020-06-29 21:16:39 +02:00
Dirk Ehmen
05980765f2
drivers/sdp3x: Driver for sensirion sdp3x sensor
2020-06-29 20:50:41 +02:00
benpicco
f372beb405
Merge pull request #12363 from maribu/dfplayer
...
drivers/dfplayer: New driver for the DFPlayer Mini MP3 player
2020-06-28 23:24:36 +02:00
Marian Buschsieweke
82bfb66cb8
drivers: Added driver for the DFPlayer MP3 player
2020-06-28 21:06:43 +02:00
Gunar Schorcht
660a852935
drivers: add netdev driver for ATWINC15x0 WiFi module
2020-06-26 12:33:38 +02:00
benpicco
3665e40726
Merge pull request #14242 from HendrikVE/pr/driver/pca9633
...
driver/pca9633: add new driver
2020-06-26 00:44:24 +02:00
Hendrik van Essen
1430ddca55
driver/pca9633: add new driver
2020-06-25 22:31:15 +02:00
benpicco
b13085defb
Merge pull request #14110 from fabian18/mtd_at24cxxx
...
drivers/at24cxxx: MTD wrapper for at24cxxx
2020-06-24 18:46:36 +02:00
Benjamin Valentin
896fcd43b0
drivers/periph/spi: add periph_spi_reconfigure feature
2020-06-21 21:19:17 +02:00
Marian Buschsieweke
f3af071b19
Merge pull request #11432 from maribu/pulse_counter_c11_atomics
...
drivers/pulse_counter: Use C11 atomics & bugfix
2020-06-17 17:03:48 +02:00
Akshai M
e672ca2010
drivers/at : Expose to Kconfig
...
Expose configurations to Kconfig:
Model choice for CONFIG_AT_SEND_EOL
Allow value to be configured as exponent for AT_BUF_SIZE
2020-06-17 14:52:21 +05:30
Akshai M
f9741b3ed5
drivers/at : Add CONFIG_
...
Add CONFIG_ prefix to AT_SEND_EOL, AT_SEND_SKIP_ECHO,
CONFIG_AT_RECV_OK, CONFIG_AT_RECV_ERROR
2020-06-17 14:52:21 +05:30
Akshai M
921badbf38
drivers/at : Inverse Logic
...
Inverse logic for AT_SEND_ECHO
2020-06-17 14:52:21 +05:30
ebc147d058
drivers/mhz19: initial support
2020-06-17 08:41:41 +02:00
Francisco Molina
8d329942df
drivers/periph/rtt: introduce RTT_MIN_OFFSET
2020-06-11 09:30:25 +02:00
Benjamin Valentin
93236e0f2c
drivers/at86rf215: add modulation config to KConfig
2020-06-09 11:48:59 +02:00
Benjamin Valentin
6a2d9f9762
drivers/at86rf215: make default O-QPSK rate configutable
2020-06-09 11:48:59 +02:00
Benjamin Valentin
4e9420bffc
drivers/at86rf215: prefix configuration defines with CONFIG_
2020-06-09 11:48:59 +02:00
benpicco
3a1ee4983c
Merge pull request #14010 from benpicco/at86rf215-mr-ofdm
...
drivers/at86rf215: implement MR-OFDM
2020-06-03 16:39:04 +02:00
Benjamin Valentin
cc5fbdf9f8
drivers/at86rf215: implement MR-OFDM
2020-06-03 15:58:50 +02:00
Leandro Lanzieri
16c6ecf28d
Merge pull request #14046 from benpicco/at86rf2xx-phy_modes
...
drivers/at86rf2xx: add support for high data rates
2020-06-03 08:35:30 +02:00
Leandro Lanzieri
48759eccdc
drivers/wdt: Add feature to indicate a configurable warning period
...
This adds the feature `periph_wdt_warning_period` that indicates that a
platform WDT driver implementation supports a configurable
CONFIG_WDT_WARNING_PERIOD.
2020-06-02 12:54:25 +02:00
Benjamin Valentin
cd107be976
drivers/periph/timer: add timer_set_periodic()
2020-05-28 17:37:41 +02:00
Benjamin Valentin
616ebf9cfb
drivers/edbg_eui: add driver to get MAC address from Atmel EDBG
...
The EDBG debugger on the `samr21-xpro` contains a unique 64 bit address
intended to be used as a MAC address for the internal radio.
This adds a driver to read that EUI-64 from the debugger, it should match
with the MAC address printed on the label on the board.
2020-05-26 10:44:11 +02:00
Akshai M
7d679c7f0f
drivers/rn2xx3.h : Add CONFIG_
...
Add CONFIG_ prefix to RN2XX3_DEFAULT_SLEEP
2020-05-22 15:52:03 +05:30
fabian18
9ecd836443
drivers/at24cxxx: add MTD wrapper for at24cxxx EEPROMs
2020-05-20 19:20:05 +02:00
Akshai M
74a7bb230b
drivers/tmp00x : Expose to Kconfig
...
Expose configurations to Kconfig
Co-authored-by: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
2020-05-20 19:09:48 +05:30
Akshai M
414fae5b0c
drivers/tmp00x : Model as bool
...
Model CONFIG_TMP00X_USE_LOW_POWER and CONFIG_TMP00X_USE_RAW_VALUES
as bool
2020-05-20 19:09:48 +05:30
Akshai M
94d6b898fc
drivers/tmp00x : Add CONFIG_
...
Add CONFIG_ prefix to compile configurations
2020-05-20 19:09:48 +05:30
Leandro Lanzieri
391f49fade
Merge pull request #14047 from benpicco/drivers/mrf24j40-turbo
...
drivers/mrf24j40: add Turbo Mode
2020-05-19 18:00:05 +02:00
Marian Buschsieweke
568404134a
drivers/periph/cpuid: Fix typo in doc
2020-05-14 16:53:05 +02:00
673ba21b9e
Merge pull request #14045 from benpicco/mtd_mapper_sectors
...
mtd_mapper: count offset in sectors
2020-05-12 13:47:12 +02:00
Benjamin Valentin
81b07895af
mtd_mapper: count offset in sectors
...
The offset of MTD regions must be aligned with erase sectors.
So in order not to waste address space, avoid misconfiguration and
eventually support storage media > 4 GiB, give the offset in sectors
instead of bytes.
2020-05-12 12:02:05 +02:00
Benjamin Valentin
baeb5134b7
drivers/mrf24j40: add Turbo Mode
...
MRF24J40 supports a proprietary turbo mode with a data rate of 625 kbit/s
instead of the standard 250 kbit/s.
It can be enabled through
ifconfig 7 set high_rate 1
2020-05-09 16:10:46 +02:00
Benjamin Valentin
ac040c6baf
drivers/at86rf2xx: add support for high data rates
...
AT86RF2xx supports high data rates in O-QPSK mode.
This is a proprietary feature, so data rates > 0 are only supported by
other AT86RF2xx devices.
high_rate 0: 250 kbit/s (IEEE mode)
high_rate 1: 500 kbit/s
high_rate 2: 1000 kbit/s (compatible with at86rf215)
high_rate 3: 2000 kbit/s
2020-05-09 01:24:08 +02:00
Akshai M
db96ebcbe1
drivers/isl29020 : Expose to Kconfig
...
Expose configurations to Kconfig.
2020-05-08 18:07:27 +05:30
Akshai M
38687e63bb
drivers/isl29020 : Add CONFIG_
...
Add CONFIG_ prefix to ISL29020_DEFAULT_ADDRESS
2020-05-08 18:07:27 +05:30
Akshai M
b4a23b8899
drivers/tcs37727 : Expose to Kconfig
...
Co-authored-by: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
2020-05-07 23:55:32 +05:30
Akshai M
04bdd405d2
drivers/tcs37727 : Add CONFIG_
...
Add CONFIG_ prefix to TCS37727_ATIME_DEFAULT and update
documentation for doxygen.
2020-05-07 23:20:24 +05:30
fabian18
50d408b202
Revert "drivers/at25xxx: return read/written bytes to match MTD API"
...
This reverts commit 8a2a936726
2020-05-06 20:24:27 +02:00
fabian18
a3a1c160ee
mtd: Change API to return 0 on success
...
Returning the number of bytes written/read could return a negative integer
because a uint32_t is expected for the length in read()/write() operations.
2020-05-06 20:24:27 +02:00
benpicco
8e11acc9f8
Merge pull request #13877 from ML-PA-Consulting-GmbH/feat/20200409__add_mtd_spi_eeprom
...
drivers/mtd_spi_eeprom: add MTD wrapper for AT25XXX EEPROMs
2020-05-06 15:56:34 +02:00
Francisco
cea0d1c532
Merge pull request #13421 from benpicco/cpu/sam0_common/i2c-deinit
...
drivers/periph/i2c: add periph_i2c_reconfigure feature & implementation for sam0
2020-05-05 19:09:47 +02:00
Benjamin Valentin
21958ff531
drivers/periph/i2c: add periph_i2c_reconfigure feature
...
It is often desireable to re-configure the pins of a bus back to GPIO mode,
either to save power when an external peripheral is turned off and current
would leak, or because a device may need a non-standard in-band signal to
be generated on the bus lines.
To serve those use cases, this patch introduces four new functions to the
I2C API:
- `i2c_init_pins()` equivalent to spi_init_pins(), restores I2C pin configuration
- `i2c_deinit_pins()` to switch the configuration of the I2C pins back to GPIO
mode and block access to the bus.
- `i2c_pin_sda()` to get the data pin for a given bus
- `i2c_pin_scl()` to get the clock pin for a given bus
Since it's unreasonable to expect having implementations for all platforms
already, those functions are only availiable when the periph_i2c_reconfigure
feature is availiable.
Applications should use FEATURES_REQUIRED += periph_i2c_reconfigure or
FEATURES_OPTIONAL if they want to make use of those functions.
2020-05-05 16:12:19 +02:00
Johannes Koster
177a653bd1
drivers/at25xxx: add MTD wrapper for AT25XXX EEPROMs
...
drivers/at25xxx: add mtd_wrapper as submodule
tests: add mtd_at25xxx test module for mtd wrapper
drivers/Makefile.dep: add at25xxx dep for mtd_at25xxx module
2020-05-05 13:37:51 +01:00
Akshai M
21dd8f7555
drivers/l3g4200d : Expose to Kconfig
...
Expose configurations to Kconfig.
2020-05-05 13:19:49 +05:30
Akshai M
ebbfcfb56b
drivers/l3g4200d : Add CONFIG_
...
Add CONFIG_ prefix to L3G4200D_DEFAULT_ADDRESS
2020-05-05 13:18:34 +05:30
Leandro Lanzieri
28eedd6459
Merge pull request #14000 from akshaim/Kconfig_lpsxxx
...
drivers/lpsxxx : Expose Configurations to Kconfig
2020-05-05 09:09:30 +02:00
Leandro Lanzieri
1fe30c1aca
Merge pull request #13932 from akshaim/Kconfig_mtd_sdcard_1
...
drivers/mtd_sdcard : Expose Configurations to Kconfig
2020-05-04 21:14:59 +02:00
Akshai M
854145c884
drivers/mtd_sdard : Add MACRO and CONFIG_
...
Replace MTD_SDCARD_SKIP_ERASE with MTD_SDCARD_ERASE
Add CONFIG_ Prefix to MTD_SDCARD_ERASE
Model CONFIG_MTD_SDCARD_ERASE as bool
2020-05-04 22:12:13 +05:30
