19523: boards/iotlab-m3: enable l3g4200d_ng r=benpicco a=benpicco
19527: drivers/sdcard_spi: small cleanup r=benpicco a=gschorcht
### Contribution description
This PR provides a small cleanup:
- the copy of `sdcard_spi_params_t` is removed (commit bfc2a51f70)
- the documentation was changed to fit the 100 characters per line. (commit 36f0162b34)
It is not necessary to hold a complete copy `sdcard_spi_params_t` in the device descriptor. Constant parameters can be used directly from ROM instead. This saves 24 bytes of RAM.
### Testing procedure
Use any board with SD Card SPI interface. The driver test should still work, for example:
```
BOARD=esp32-wrover-kit make -j8 -C tests/driver_sdcard_spi flash term
```
```
main(): This is RIOT! (Version: 2023.07-devel-176-g7213c-drivers/sdcard_spi_cleanup)
SD-card spi driver test application
insert SD-card and use 'init' command to set card to spi mode
WARNING: using 'write' or 'copy' commands WILL overwrite data on your sd-card and
almost for sure corrupt existing filesystems, partitions and contained data!
> init
Initializing SD-card at SPI_0...
[OK]
>
```
### Issues/PRs references
19530: sys/xtimer: add missing "modules.h" include to `xtimer.h` r=benpicco a=kaspar030
19532: tests/unittests: tests-core-mbox: add missing `container.h` include r=benpicco a=kaspar030
19533: core: move macros/math.h to core/lib/include/macros r=benpicco a=kaspar030
19535: nanocoap_sock: defuse nanocoap_sock_get() API footgun r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
18620: core: add core_mutex_debug to aid debugging deadlocks r=maribu a=maribu
### Contribution description
Adding `USEMODULE += core_mutex_debug` to your `Makefile` results in
on log messages such as
[mutex] waiting for thread 1 (pc = 0x800024d)
being added whenever `mutex_lock()` blocks. This makes tracing down
deadlocks easier.
### Testing procedure
Run e.g.
```sh
USEMODULE=core_mutex_debug BOARD=nucleo-f767zi make -C tests/mutex_cancel flash test
```
which should provide output such as
```
Welcome to pyterm!
Type '/exit' to exit.
READY
s
[mutex] waiting for thread 1 (pc = 0x8000f35)
START
main(): This is RIOT! (Version: 2022.10-devel-841-g5cc02-core/mutex/debug)
Test Application for mutex_cancel / mutex_lock_cancelable
=========================================================
Test without cancellation: OK
Test early cancellation: OK
Verify no side effects on subsequent calls: [mutex] waiting for thread 1 (pc = 0x800024d)
OK
Test late cancellation: [mutex] waiting for thread 1 (pc = 0x0)
OK
TEST PASSED
```
```sh
$ arm-none-eabi-addr2line -a 0x800024d -e tests/mutex_cancel/bin/nucleo-f767zi/tests_mutex_cancel.elf
0x0800024d
/home/maribu/Repos/software/RIOT/tests/mutex_cancel/main.c:51
```
### Issues/PRs references
Depends on and includes https://github.com/RIOT-OS/RIOT/pull/18619
19296: nanocoap: allow to define CoAP resources as XFA r=maribu a=benpicco
19504: cpu/cc26xx_cc13xx: Fix bogus array-bound warning r=maribu a=maribu
### Contribution description
GCC 12 create a bogus array out of bounds warning as it assumes that because there is special handling for `uart == 0` and `uart == 1`, `uart` can indeed be `1`. There is an `assert(uart < UART_NUMOF)` above that would blow up prior to any out of bounds access.
In any case, optimizing out the special handling of `uart == 1` for when `UART_NUMOF == 1` likely improves the generated code and fixes the warning.
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:88:8: error: array subscript 1 is above array bounds of 'uart_isr_ctx_t[1]' [-Werror=array-bounds]
88 | ctx[uart].rx_cb = rx_cb;
| ~~~^~~~~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:52:23: note: while referencing 'ctx'
52 | static uart_isr_ctx_t ctx[UART_NUMOF];
| ^~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:89:8: error: array subscript 1 is above array bounds of 'uart_isr_ctx_t[1]' [-Werror=array-bounds]
89 | ctx[uart].arg = arg;
| ~~~^~~~~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:52:23: note: while referencing 'ctx'
52 | static uart_isr_ctx_t ctx[UART_NUMOF];
| ^~~
### Testing procedure
The actual change is a pretty obvious one-liner, so that code review and a green CI should be sufficient. If not, running any UART example app without regression should do.
### Issues/PRs references
None
19506: tools/openocd: Fix handling of OPENOCD_CMD_RESET_HALT r=maribu a=maribu
### Contribution description
The OPENOCD_CMD_RESET_HALT was not longer correctly passed to the script. This fixes the issue.
### Testing procedure
Flashing of e.g. the `cc2650-launchpad` with upstream OpenOCD should work again.
### Issues/PRs references
The change was added to https://github.com/RIOT-OS/RIOT/pull/19050 after testing the PR and before merging. I'm not sure if the fix never worked because of this, or if behavior of `target-export-variables` or GNU Make changed.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
19383: cord: include gcoap_req_send returning 0 in error r=benpicco a=bergzand
### Contribution description
gcoap_req_send returns 0 if it was unable to send the CoAP request. CoRD did not include that case in the return code checks. This changes CoRD to include it and drop the registration if CoAP could not send the request. The old behaviour made the CoRD thread lock up.
### Testing procedure
- Check with the gcoap API docs.
- I can reliable trigger the issue with a RIOT application including both the `cord_ep_standalone` module and some measurement reported both sending requests to the same application. If at some point the application is shut down, gcoap has all its memo's occupied with the measurement reporting and can't add the CoRD update request. Thus the CoRD update request fails with a zero code and the thread (previously) would lock up.
### Issues/PRs references
None
19385: cpu/stm32/periph/timer: fix clobered IRQ flag r=benpicco a=Enoch247
### Contribution description
From the git commit:
> The STM32 periph_timer driver reads the timer's status flags, then clears them all. It is possible that a timer interrupt could occur between reading the flag and clearing it. This would lead to a lost interrupt.
>
> The timer's status flags can be cleared by software, but can only be set by the hardware. This patch takes advantage of this by only clearing the flags it knows are set. The rest of the flags are set, which doesn't actually change their state.
I had trouble finding anything in ST's datasheet saying that software could not set the timer's status flags, but testing showed that this is how it works in practice. Further, [ST's own HAL ](https://github.com/STMicroelectronics/STM32CubeF4/blob/master/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h#L1258)confirms this. If the hardware didn't work this way, it would be impossible to atomically read-modify-write the flags.
### Testing procedure
I tested by doing the following:
1. `make -C tests/periph_timer BOARD=nucleo-f767zi all flash term`
2. press s
3. press [ENTER]
4. observe test passes
5. `make -C tests/periph_timer_periodic BOARD=nucleo-f767zi all flash term`
6. press s
7. press [ENTER]
8. observe test passes
9. `make -C tests/periph_timer_short_relative_set BOARD=nucleo-f767zi all flash term`
10. press s
11. press [ENTER]
12. observe test passes
### Issues/PRs references
- none known
Co-authored-by: Koen Zandberg <koen@bergzand.net>
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
gcoap_req_send returns 0 if it was unable to send the CoAP request. CoRD
did not include that case in the return code checks. This changes CoRD
to include it and drop the registration if CoAP could not send the
request. The old behaviour made the CoRD thread lock up.
19365: bootloaders: fix bootloader button logic r=benpicco a=dylad
### Contribution description
In lastest master, the `BTN_BOOTLOADER_INVERTED` logic doesn't work as expected.
This PR fixes the underlying logic by replacing the `BTN_BOOTLOADER_INVERTED` macro definition by a runtime function.
In fact the current code:
```
#ifndef BTN_BOOTLOADER_INVERTED
#if (BTN0_MODE == GPIO_IN_PD)
#define BTN_BOOTLOADER_INVERTED false
#else
#define BTN_BOOTLOADER_INVERTED true
#endif
#endif
```
cannot work because both `BTN0_MODE` and `GPIO_IN_PD` are not known by the precompiler as they are enum values defined at cpu level.
Thus, replaces it by a runtime function in our bootloader applications.
I've also add `GPIO_OD_PU` along side `GPIO_IN_PU` and add a new define (which can be override at board level or app level) in case an external pullup is used.
### Testing procedure
Flash the riotboot_dfu bootloader:
`make BOARD=saml21-xpro -C bootloaders/riotboot_dfu flash`
Then, flash any test app:
`PROGRAMMER=dfu-util USEMODULE=usbus_dfu make BOARD=saml21-xpro -C tests/shell riotboot/flash-slot0`
With master, the application will not start.
With this PR, the application will start after flashing.
### Issues/PRs references
Fixes#19364
19366: nanocoap_sock: don't include token in empty ACK response r=benpicco a=benpicco
19367: cord: bump reference from draft to rfc r=benpicco a=bergzand
### Contribution description
The draft is an RFC, this bumps the "see also" in the docs to the rfc.
### Testing procedure
Check that the correct RFC is linked in the docs.
### Issues/PRs references
None
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Koen Zandberg <koen@bergzand.net>
19119: makefiles/tools/serial.inc.mk: Allow detection of debug adapter r=benpicco a=maribu
### Contribution description
This PR adds the ability to automatically detect the debug adapter for boards with an integrated programmer/debugger, if that debugger also provides the TTY.
This extends the TTY detection that can be enabled with `MOST_RECENT_PORT=1` to set `DEBUG_ADAPTER_ID` to the TTY's serial, but only if `DEBUG_ADAPTER_ID_IS_TTY_SERIAL` is set to `1` by the board (as not all boards have an integrated programmer/debugger).
### Testing procedure
Connect a HiFive-1B and a nRF52840DK at the same time and try `make BOARD=<nrf52840dk|hifive1b> MOST_RECENT_PORT=1 -C examples/default flash term` for both. The programmer will not reliably select the correct programmer in `master`. With this PR, it will.
### Issues/PRs references
None
19313: gnrc_static: don't parse address as prefix r=benpicco a=benpicco
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
19294: sys/shell: don't include suit command by default r=benpicco a=benpicco
19295: gcoap: Finish the gcoap_get_resource_list_tl -> gcoap_get_resource_list renaming r=benpicco a=chrysn
### Contribution description
In #16688, an argument was added to the `gcoap_get_resource_list` function by creating a new function `gcoap_get_resource_list_tl` with a deprecation and roll-over plan.
This plan has not been acted on so far.
This PR shortens the original plan by just adding the argument to `gcoap_get_resource_list` and removing `gcoap_get_resource_list_tl` in a single go. The rationale for this deviation is that while it's a public API, its only two practical consumers are the (built-in) well-known/core implementation, and the (built-in) CoRE Resource Directory (cord) endpoint. Moreover, a further change to this API (switching over to `coap_block_slicer_t`) is expected to happen within this release cycle, which would take something like 4 total releases to get through otherwise, which is unrealistic for an API that there are no known external users of.
A second commit clean up ToDo items (in the changed function's documentation) that referred to a IETF draft that has long been abandoned by the CoRE WG.
### Testing procedure
Plain inspection and CI passing should suffice.
### AOB
There is a second analogous pair left over from #16688, `gcoap_req_send` / `gcoap_req_send_tl`. As that *is* expected to be used widely, I prefer not to mix these two concerns, and get the present one through without unnecessary hold-up.
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: chrysn <chrysn@fsfe.org>
This is an API change in the latter, which would typically now take an
extra argument GCOAP_SOCKET_TYPE_UNDEF.
Follow-Up-For: https://github.com/RIOT-OS/RIOT/pull/16688
19278: gnrc_dhcpv6_client_simple_pd: select upstream based on type/index r=benpicco a=benpicco
19290: sys/crypto: make AES_KEY struct private & rename it r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
19142: sock_dtls: move common code into sock_dtls_establish_session() r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
18903: pkg/tinyusb: add tinyUSB netdev driver r=dylad a=gschorcht
### Contribution description
This PR adds the tinyUSB netdev driver.
The tinyUSB netdev driver is part of the tinyUSB package and is enabled by module `tinyusb_netdev`. It is available for boards that provide the `tinyusb_device` feature.
**Please note** Since the tinyUSB package is distinct from (and incompatible with) the USB stack provided around USBUS in RIOT (see USB), the tinyUSB netdev driver cannot be used together with with any USBUS device class.
The tinyUSB netdev driver uses Ethernet over USB and supports the following protocols:
- CDC ECM (Ethernet Control Model)
- CDC NCM (Network Control Model)
- RNDIS (Microsoft Remote NDIS)
While Linux and macOS support all these protocols, Microsoft Windows only supports the RNDIS protocol and since Windows version 11 also the CDC NCM protocol. macOS supports the RNDIS protocol since version 10.15 (Catalina).
Which protocol is used is selected by the corresponding pseudomodules `tinyusb_class_net_cdc_ecm`, `tinyusb_class_net_cdc_ncm` and `tinyusb_class_net_rndis`.
The CDC ECM protocol (`tinyusb_class_net_cdc_ecm`) and the RNDIS protocol (`tinyusb_class_net_rndis`) can be used simultaneously to support all operating systems, for example :
```
USEMODULE='tinyusb_netdev tinyusb_class_net_rndis tinyusb_class_net_cdc_ecm' \
BOARD=... make -C ... flash
```
In this case, the CDC ECM protocol is the default protocol and the RNDIS protocol the alternative protocol defined as second device configuration. The CDC NCM protocol cannot be used together with the CDC ECM or the RNDIS protocol.
This PR includes PR #18983 for now to be compilable.
Comparison with USBUS CDC ECM (`nucleo-f767zi` board):
```
text data bss dec hex filename
65916 596 18728 85240 14cf8 tests_pkg_tinyusb_netdev.elf
```
```
text data bss dec hex filename
63120 544 15444 79108 13504 tests_usbus_cdc_ecm.elf
```
### Testing procedure
Use a board that is supported by tinyUSB. Compile and flash the test application for each protocol:
1. RNDIS
```
BOARD=... make -j8 -C tests/pkg_tinyusb_netdev flash
```
2. CDC ECM
```
CLASS=tinyusb_class_net_cdc_ecm BOARD=... make -j8 -C tests/pkg_tinyusb_netdev flash
```
3. CDC NCM
```
CLASS=tinyusb_class_net_cdc_ncm BOARD=... make -j8 -C tests/pkg_tinyusb_netdev flash
```
For each test, a network interface should be added on the host. Use command `ifconfig` on USB device and on the host and check that both have a link local address. In syslog there should be an output like the following:
<details>
```
Nov 13 18:14:46 gunny8 kernel: [4611465.480025] usb 1-2.2: new full-speed USB device number 28 using xhci_hcd
Nov 13 18:14:47 gunny8 kernel: [4611465.581641] usb 1-2.2: New USB device found, idVendor=1209, idProduct=7d01, bcdDevice= 1.00
Nov 13 18:14:47 gunny8 kernel: [4611465.581646] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 13 18:14:47 gunny8 kernel: [4611465.581650] usb 1-2.2: Product: nucleo-f767zi
Nov 13 18:14:47 gunny8 kernel: [4611465.581653] usb 1-2.2: Manufacturer: RIOT-os.org
Nov 13 18:14:47 gunny8 kernel: [4611465.581654] usb 1-2.2: SerialNumber: 6591620BCB270283
Nov 13 18:14:47 gunny8 vmnetBridge: RTM_NEWLINK: name:usb0 index:508 flags:0x00001002
Nov 13 18:14:47 gunny8 vmnet-natd: RTM_NEWLINK: name:usb0 index:508 flags:0x00001002
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.1066] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/528)
Nov 13 18:14:47 gunny8 kernel: [4611465.594604] rndis_host 1-2.2:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-2.2, RNDIS device, fa:db:7c:1b:58:80
Nov 13 18:14:47 gunny8 mtp-probe: checking bus 1, device 28: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2"
Nov 13 18:14:47 gunny8 mtp-probe: bus: 1, device: 28 was not an MTP device
Nov 13 18:14:47 gunny8 systemd-udevd[17796]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Nov 13 18:14:47 gunny8 vmnet-natd: RTM_NEWLINK: name:usb0 index:508 flags:0x00001002
Nov 13 18:14:47 gunny8 kernel: [4611465.643852] rndis_host 1-2.2:1.0 enp0s20f0u2u2: renamed from usb0
Nov 13 18:14:47 gunny8 vmnetBridge: RTM_NEWLINK: name:usb0 index:508 flags:0x00001002
Nov 13 18:14:47 gunny8 vmnet-natd: RTM_NEWLINK: name:enp0s20f0u2u2 index:508 flags:0x00001002
Nov 13 18:14:47 gunny8 vmnetBridge: RTM_NEWLINK: name:enp0s20f0u2u2 index:508 flags:0x00001002
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.1833] device (usb0): interface index 508 renamed iface from 'usb0' to 'enp0s20f0u2u2'
Nov 13 18:14:47 gunny8 upowerd[2845]: unhandled action 'bind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.1
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2037] device (enp0s20f0u2u2): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Nov 13 18:14:47 gunny8 vmnet-natd: RTM_NEWLINK: name:enp0s20f0u2u2 index:508 flags:0x00011043
Nov 13 18:14:47 gunny8 vmnetBridge: RTM_NEWLINK: name:enp0s20f0u2u2 index:508 flags:0x00011043
Nov 13 18:14:47 gunny8 vmnetBridge: Adding interface enp0s20f0u2u2 index:508
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2075] device (enp0s20f0u2u2): carrier: link connected
Nov 13 18:14:47 gunny8 upowerd[2845]: unhandled action 'bind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2129] settings: (enp0s20f0u2u2): created default wired connection 'Kabelgebundene Verbindung 2'
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <warn> [1668359687.2142] device (enp0s20f0u2u2): connectivity: "/proc/sys/net/ipv4/conf/enp0s20f0u2u2/rp_filter" is set to "1". This might break connectivity checking for IPv4 on this device
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2151] device (enp0s20f0u2u2): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Nov 13 18:14:47 gunny8 vmnetBridge: RTM_NEWLINK: name:enp0s20f0u2u2 index:508 flags:0x00011043
Nov 13 18:14:47 gunny8 vmnet-natd: RTM_NEWLINK: name:enp0s20f0u2u2 index:508 flags:0x00011043
Nov 13 18:14:47 gunny8 upowerd[2845]: unhandled action 'bind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2
Nov 13 18:14:47 gunny8 systemd-udevd[17796]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2403] policy: auto-activating connection 'Kabelgebundene Verbindung 2' (0b1ae45e-c76e-3efb-a2cd-138ca2b2a59c)
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2414] device (enp0s20f0u2u2): Activation: starting connection 'Kabelgebundene Verbindung 2' (0b1ae45e-c76e-3efb-a2cd-138ca2b2a59c)
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2419] device (enp0s20f0u2u2): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2429] device (enp0s20f0u2u2): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2440] device (enp0s20f0u2u2): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2445] dhcp4 (enp0s20f0u2u2): activation: beginning transaction (timeout in 45 seconds)
Nov 13 18:14:47 gunny8 vmnetBridge: RTM_NEWLINK: name:enp0s20f0u2u2 index:508 flags:0x00011043
Nov 13 18:14:47 gunny8 vmnet-natd: RTM_NEWLINK: name:enp0s20f0u2u2 index:508 flags:0x00011043
Nov 13 18:14:47 gunny8 avahi-daemon[1464]: Joining mDNS multicast group on interface enp0s20f0u2u2.IPv6 with address fe80::dba4:adb8:9ffe:d93e.
Nov 13 18:14:47 gunny8 avahi-daemon[1464]: New relevant interface enp0s20f0u2u2.IPv6 for mDNS.
Nov 13 18:14:47 gunny8 avahi-daemon[1464]: Registering new address record for fe80::dba4:adb8:9ffe:d93e on enp0s20f0u2u2.*.
Nov 13 18:14:47 gunny8 kernel: [4611465.895046] userif-1: sent link down event.
Nov 13 18:14:47 gunny8 kernel: [4611465.895052] userif-1: sent link up event.
```
</details>
Ping from and to the host.
### Issues/PRs references
Depends on PR https://github.com/RIOT-OS/RIOT/pull/18983
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
18472: drivers/mrf24j40: add support for IEEE 802.15.4 Radio HAL r=benpicco a=jia200x
19175: drivers/periph_common/flashpage: fix silent error r=benpicco a=Enoch247
### Contribution description
This patch removes a test that silently hides failed writes to NULL. Instead, assert is used to ensure that the address is not NULL.
### Testing procedure
I am not certain how to update the tests to catch asserts. If this is possible, I will add a test, if someone will point me to a good example to learn from.
### Issues/PRs references
- none
Co-authored-by: Jose Alamos <jose@alamos.cc>
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
18477: gnrc_static: add static network configuration r=miri64 a=benpicco
19101: CI: update check-labels-action r=miri64 a=kaspar030
19155: Revert "sys/pm_layered: pm_(un)block add attribute optimize(3)" r=maribu a=Teufelchen1
Revert "sys/pm_layered: pm_(un)block add attribute optimize(3) -shortens hotpath"
This reverts commit 5447203921.
### Contribution description
Compiling `examples/gnrc_networking_mac` using `TOOLCHAIN=llvm` yields the following error:
```
RIOT/sys/pm_layered/pm.c:77:16: error: unknown attribute 'optimize' ignored [-Werror,-Wunknown-attributes]
__attribute__((optimize(3)))
```
As indicated, this is because the attribute `optimize` is GCC only and not present in LLVM.
Compare the manpages of [GCC](https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html) and [LLVM](https://clang.llvm.org/docs/AttributeReference.html).
### Testing procedure
Since this should only affect performance and not behavior, no special testing is needed. I am not aware of any tests in RIOT which could verify that assumption.
### Issues/PRs references
Introduced in #18846
There is another instance of this attribute being used in[ shell_lock.c](6fb340d654/sys/shell_lock/shell_lock.c (L80)). Since the usage is security related, I omit it from this PR.
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
Co-authored-by: Teufelchen1 <bennet.blischke@haw-hamburg.de>
17810: drivers/slipdev: implement sleep states r=benpicco a=benpicco
18348: sys/net/gnrc/pktbuf_static: make use of alignas() r=maribu a=maribu
### Contribution description
Since we are now using C11, we can make use of `alignas()` provided by `<stdalign.h>` to make the alignment code easier to read.
### Testing procedure
I didn't expect this to change binaries, but is safes 4 bytes. `elf_diff` shows that the compiler (at least GCC 11.3.0) was not able to detect that `gnrc_pktbuf_static_buf` was just an alias for `_pktbuf_buf`. That makes sense since it would be hard without LTO to rule out external writes to `gnrc_pktbuf_static_buf`, unless one would have added a `const` (to the pointer, not to the data the pointer points to).
The [output of `elf_diff`](https://mari-bu.de/pr_18348_gnrc_pktbuf_static_elf_diff.html) looks otherwise quite unscary.
Also:
```
$ make BOARD=nucleo-f767zi -C tests/unittests/ tests-pktbuf flash test
make: Entering directory '/home/maribu/Repos/software/RIOT/tests/unittests'
Building application "tests_unittests" for "nucleo-f767zi" with MCU "stm32".
[...]
Welcome to pyterm!
Type '/exit' to exit.
READY
s
START
.............................................
OK (45 tests)
make: Leaving directory '/home/maribu/Repos/software/RIOT/tests/unittests'
```
### Issues/PRs references
None
19120: CI: seperate check-labels and check-commits workflows r=maribu a=kaspar030
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
The macros CONCAT(), MIN(), and MAX() are defined over and over again in
RIOT's code base. This de-duplicates the code by moving the macros to a
common place.
18773: nanocoap_sock: fix handling empty ACKs with separate response r=maribu a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
If a NON confirmable message is sent with a callback function,
not receiving a response in time would lead to a retransmission.
This is of course an error, as only CON messages are to be retransmitted.
In situations with high packet loss, if all sync packets are lost, conflicting
subnets will be configured.
If the network is static, this can be prevented by always using the highest number
of subnets that has been observed.
This assumes no nodes are physically added / removed from the network.
This eliminates race conditions around unregistering netdevs.
gnrc_netreg_lookup-style functions perform a DEVELHELP check on whether
that lock is held.
Model the LoRaWAN integration to GNRC's netif command (ifconfig) as
submodule of it, namely `shell_cmd_gnrc_netif_lorawan`.
This should fix a regression introduced by
https://github.com/RIOT-OS/RIOT/pull/18355
As far as I can tell, no DHCPv6 RFC specifies this option. The handling
for the zero option was added in #17736 by @benpicco to fix issues
encountered while trying to retrieve a DHCHPv6 lease. However, I
strongly suspect that the zero option was encountered in this case due
to an out-of-bounds read performed in RIOT's DHCPv6 client
implementation (i.e. the option parsing loop read beyond the packet
bounds). This issue was fixed in #18307 and I strongly suspect that it
should also fix the issue @benpicco originally encountered in #17736. As
such, I propose that we remove the if statement which treats the zero
option as an end-of-payload marker.
Fixes#18309
Previously `shell_commands` was a "catch-all" module that included
shell commands for each and every used module that has a shell
companion. Instead, the new `shell_cmds` module is now used to provide
shell commands as individually selectable submodules, e.g.
`cmd_gnrc_icmpv6_echo` now provides the ICMPv6 echo command (a.k.a.
ping).
To still have a "catch all" module to pull in shell commands of modules
already used, `shell_cmds_default` was introduced. `shell_commands`
depends now on `shell_cmds_default` for backward compatibility, but
has been deprecated. New apps should use `shell_cmds_default`
instead.
For a handful of shell commands individual selection was already
possible. Those modules now depend on the corresponding `cmd_%` module
and they have been deprecated.
This adds support for netdevs implementing the new API that provides
`netdev_driver_t::confirm_send()`. This allows implementing netdevs
in an event based non-blocking fashion, making live of driver
developers a bit easier. In addition, `gnrc_tx_sync` will now throttle
users of `sock_udp_send()` so that they can only send datagrams as
fast as the network stack and hardware is able to send out.
Finally, this lays the groundwork to fetch TX statistics (such as
TX timestamps, reception of layer 2 ACKs/NACKs, etc.) from the network
devices.
- most were trivial
- missing group close or open
- extra space
- no doxygen comment
- name commad might open an implicit group
this hould also be implicit cosed but does not happen somtimes
- crazy: internal declared groups have to be closed internal
As per Section 5.2.1 of the MQTT-SN specification, the MQTT-SN length
header is either 1- or 3-octet long. If it is 3-octet long then the
first octet is 0x01. The asymcute implementation currently only checks
that the incoming packet is at least 2-octet long before attempting to
parse it (MIN_PKT_LEN). However, if the first octet is 0x01 the packet
must be more than 3 octet long in order to be valid. Since asymcute
does not check this it reads one octet beyond the packet data for a
2-octet packet where the first octet has the value 0x01. This commit
fixes this issue by adding an additional sanity check to _len_get.
Currently, asymcute only matches an MQTT-SN request to its
acknowledgement using the MsgId header. However, I strongly believe
this to be insufficient as asymcute would thus also match a SUBACK
to a prior PUBLISH message (for example) as long as the message ID
matches. To address this issue, this commit modifies _req_preprocess
to also compare the request message type in addition to the message id.
The _parse_reply function iterates over the DHCPv6 message options
twice but only performs sanity checks on the option length in the
first iteration. As such, both loop iterations need to be identical.
Unfortunately, there aren't without this commit as (1) they use
different maximum length values and (2) the first iteration stops
parsing as soon as it encounters a zero option while the second
doesn't. As such, it is possible for out-of-bounds read to be
performed by the second loop iteration. This commit fixes this.
The handlers for these MQTT message lock the connection mutex on
function entry. During automated testing of asymcute, I discovered
return paths for these function which do not unlock the connection
mutex. This results in a deadlock which prevents asymcute from
sending any further messages.
Synchronize the RPL thread updating the RPL netstats with the RPL
shell command reading it by disabling IRQs. This will prevent printing
corrupted data on non-32bit platforms as well as printing inconsistent
data (e.g. TX count of old state in conjunction with TX bytes of new
state) for all platforms.
Co-authored-by: Martine Lenders <mail@martine-lenders.eu>
There is a repeating pattern in the struct that is split out into a
subtype in this commit. This makes handling the data easier, as now
done in the print routine.
Instead of retrieving a pointer with NETOPT_STATS, retrieve the current
data. This avoids data corruptions when reading from one thread (e.g.
the thread running the shell (ifconfig command)) while another thread
is updating it (e.g. the netif thread).
The issue affects all boards, as users typically expect the count of
TX packets and the number of TX bytes to refer to the same state. For
16 bit and 8 bit platforms even a single netstat entry can read back
corrupted.
This fixes the issue by just copying the whole netstat_t struct over
without requiring explicit locking on the user side. A multi-threaded
network stack still needs to synchronize the thread responding to
netopt_get with the thread writing to the netstat_t structure, but that
is an implementation detail no relevant to the user of the API.
An EUI provider can provide EUIs for multiple interfaces based on
their index.
For this is should get the index of the interface, not the index of
the EUI provider.
The assertion is a bit overeager.
In case of receiving a wrong message ID, we re-try receive without
entering the STATE_REQUEST_SEND state again, so it is expected that
we get a non-NULL ctx/response from sock_udp_recv_buf().
What this assert should actually check is that we don't get a non-NULL
ctx after calling sock_udp_recv_buf() with a non-NULL ctx.
So make this explicit to not falsely fail the assertion.
In a881af8b08 we would return early if the subnet did not change,
but we must still send the router advertisement with the route information
option to the upstream network, otherwise hosts in that network will not
consider the downstream subnet off-link.
- add `netif_get_ipv6()` to query IPv6 (as a slim convenience wrapper
for `netif_get_opt()`)
- add `netifs_get_ipv6()` to query IPv6 addresses of all netifs
- add `netif_print_ipv6()` to print the IPv6 address(es) of a single
netif
- add `netifs_print_ipv6()` to print the IPv6 address(es) of all netifs
If there are still messages in the mbox when gnrc_netreg_unregister()
is called, we must release the associated pktbuf snips, otherwise
they are leaked away forever.
E.g. `sock_udp_close()` was called without receiving all messages with
`sock_udp_recv()`.
