The INTFLAGS register is cleared by writing a 1 to the corresponding interrupt
flag bit. From the samr21's manual:
> Writing a zero to this bit has no effect.
> Writing a one to this bit clears the Compare 0 interrupt flag.
This is a common pattern in flag registers.
This RTT driver is using or-equal to clear the flags, which means it can
possibly clear other interrupts. There's a small chance that one event is
missed if it happens very close to another event.
Credits to @benpicco, @dylad for pointing out missing fixes.
When flashing some applications the flasher sometimes gets stuck which
prevents flashing after.
It may be from a specific firmware or operation but do not have one yet.
Connect with reset asserted fix flashing from this state.
It was found after the `stm32f3discovery` get stuck in a non-flashable mode
after some firmwares.
- Moved compiler & linker flags from boards/common/msba2 to cpu/arm7_common
- Moved dependency to newlib nano to cpu/arm7_common
- Moved config to link in cpu/startup.o to cpu/arm7_common
Enable the handling of flashing `softdevice.hex` when flashing the firmware
for openocd.
However, for flashing, only the `hexfile` and `binfile` can currently be used.
The `elffile` is generated with local pages aligned to `0x10000` which makes
the program starting at `0x1f000` be flashed from `0x10000` with padding bytes
even if the `.text` section is indeed at `0x1f000`:
readelf --sections bin/nrf52dk/gnrc_networking.elf
...
[ 1] .text PROGBITS 0001f000 00f000 00f698 00 AX 0 0 16
...
readelf --segments bin/nrf52dk/gnrc_networking.elf
...
LOAD 0x000000 0x00010000 0x00010000 0x1e6a0 0x1e6a0 R E 0x10000
...
The padding bytes would go through `verify_image` in `openocd` so be expected
to not be overwritten but are by `softdevice.hex`
Using --nmagic at link time removes the local page alignement but would
need dedicated testing.
`examples/gnrc_networking_mac/udp.c` is a duplicate of the file in
`gnrc_networking`. However, while the latter moved along in code style
and static analysis, the first was left a bit at the wayside. This
change resyncs the two files.
The default channel configuration is managed within the Makefiles of many
examples and tests. This commit moves the default channel logic to
`makefiles/default-channel.ink.mk` to ease maintenance. All Makefiles that
previously managed the default channel configuration themself have been
updated to include that file.
The default channel configuration of the cc110x has been added
This (re-)introduces the `CC110X_DEFAULT_CHANNEL` preprocessor macro to set the
default channel of the `cc110x` at compile time. The same macro has been used
in the previous version of the driver, so some users might still expect it to
work.
