When setting the `ENABLE_DEBUG` flag to *1* in ip.c,
the **rpl_udp** example won't compile, because the variable `addr_str`
is also defined in **rpl_udp.h** as extern.
Prefixing `addr_str` with `static` in ip.c solves this problem.
llvm-ar does not understand `-rc`, but works for creating empty
archives when called with `rc` (without the leading dash). BSD `ar`
which ships with OSX, which the test is written for, understands the
argument with or without the leading dash (but does not support creating
empty archives.)
add peripheral drivers for Freescale Kinetis MCUs:
adc driver
cpuid driver
gpio driver
hwtimer_arch driver (hwtimer used Low Power Timer)
i2c driver (master mode only)
mcg driver
pwm driver
random_rnga driver
random_rngb driver
rtc driver
spi driver
timer driver (timer used Periodic Interrupt Timer)
uart driver
add doc.txt (configuration examples)
random_rnga: Update RNGA driver in preparation for RNGB driver.
random_rngb: Add RNGB driver.
spi: refactor SPI to work for multiple CTARS, add spi_acquire, spi_release
gpio: Add gpio_irq_enable, gpio_irq_disable. Refactor GPIO.
gpio: Add gpio_irq_enable, gpio_irq_disable.
gpio: Refactor ISR functions to work with all GPIOs (0-31) and all ports (PORTA-PORTH)
adc: Refactor ADC, add calibration and scaling.
Added integer scaling of results in adc_map.
Handle precision setting in adc_init.
Set ADC clock divider depending on module clock.
Add ADC_1 as a possible device.
Add ADC calibration procedure according to K60 ref manual.
Handle ADC pins which are not part of the pin function mux.
Signed-off-by: Joakim Gebart <joakim.gebart@eistec.se>
Currently, the DIO options `dodag conf` and `prefix info` are off by two
bytes in their `length` field. The RFC states, that the length field
should not include the option `type` field and the `length` field (two bytes).
For Prefix Info Option: Option Length: 30 (RFC 6550, P.61)
For Dodag Conf Option: Option Length: 14 (RFC 6550, P.52)
Wireshark complains about DIOs as malformed packets, otherwise.
Can be reproduced by running the rpl_udp example and logging the DIOs
via wireshark.
I enabled debug output in all files to poke around
and there were some errors (seemingly) due to code
changes that were not tested with debug enabled. This
commits tries to fix these issues.
