c0628a3058
add peripheral drivers for Freescale Kinetis MCUs:
adc driver
cpuid driver
gpio driver
hwtimer_arch driver (hwtimer used Low Power Timer)
i2c driver (master mode only)
mcg driver
pwm driver
random_rnga driver
random_rngb driver
rtc driver
spi driver
timer driver (timer used Periodic Interrupt Timer)
uart driver
add doc.txt (configuration examples)
random_rnga: Update RNGA driver in preparation for RNGB driver.
random_rngb: Add RNGB driver.
spi: refactor SPI to work for multiple CTARS, add spi_acquire, spi_release
gpio: Add gpio_irq_enable, gpio_irq_disable. Refactor GPIO.
gpio: Add gpio_irq_enable, gpio_irq_disable.
gpio: Refactor ISR functions to work with all GPIOs (0-31) and all ports (PORTA-PORTH)
adc: Refactor ADC, add calibration and scaling.
Added integer scaling of results in adc_map.
Handle precision setting in adc_init.
Set ADC clock divider depending on module clock.
Add ADC_1 as a possible device.
Add ADC calibration procedure according to K60 ref manual.
Handle ADC pins which are not part of the pin function mux.
Signed-off-by: Joakim Gebart <joakim.gebart@eistec.se>
|
||
|---|---|---|
| boards | ||
| core | ||
| cpu | ||
| dist | ||
| doc | ||
| drivers | ||
| examples | ||
| pkg | ||
| sys | ||
| tests | ||
| .astylerc | ||
| .gitattributes | ||
| .gitignore | ||
| .travis.yml | ||
| CONTRIBUTING.md | ||
| keyword_space.sed | ||
| LICENSE | ||
| Makefile | ||
| Makefile.application | ||
| Makefile.base | ||
| Makefile.buildtests | ||
| Makefile.cflags | ||
| Makefile.defaultmodules | ||
| Makefile.dep | ||
| Makefile.include | ||
| Makefile.modules | ||
| Makefile.pseudomodules | ||
| Makefile.vars | ||
| README.md | ||
| release-notes.txt | ||
ZZZZZZ
ZZZZZZZZZZZZ
ZZZZZZZZZZZZZZZZ
ZZZZZZZ ZZZZZZ
ZZZZZZ ZZZZZ
ZZZZZ ZZZZ
ZZZZ ZZZZZ
ZZZZ ZZZZ
ZZZZ ZZZZZ
ZZZZ ZZZZZZ
ZZZZ ZZZZZZZZ 777 7777 7777777777
ZZ ZZZZ ZZZZZZZZ 777 77777777 77777777777
ZZZZZZZ ZZZZ ZZZZZZZ 777 7777 7777 777
ZZZZZZZZZ ZZZZ Z 777 777 777 777
ZZZZZZ ZZZZ 777 777 777 777
ZZZZZ ZZZZ 777 777 777 777
ZZZZZ ZZZZZ ZZZZ 777 777 777 777
ZZZZ ZZZZZ ZZZZZ 777 777 777 777
ZZZZ ZZZZZ ZZZZZ 777 777 777 777
ZZZZ ZZZZ ZZZZZ 777 777 777 777
ZZZZZ ZZZZZ ZZZZZ 777 777 777 777
ZZZZZZ ZZZZZZ ZZZZZ 777 7777777777 777
ZZZZZZZZZZZZZZZ ZZZZ 777 77777777 777
ZZZZZZZZZZZ Z
ZZZZZ
The friendly Operating System for IoT!
FEATURES
RIOT OS is an operating system for Internet of Things (IoT) devices. It is based on a microkernel and designed for
- energy efficiency
- hardware independent development
- a high degree of modularity
Its features comprise
- a preemptive, tickless scheduler with priorities
- flexible memory management
- high resolution timers
- virtual, long-term timers
- the native port allows to run RIOT as-is on Linux, BSD, and MacOS. Multiple instances of RIOT running on a single machine can also be interconnected via a simple virtual Ethernet bridge
- Wiselib support (C++ algorithm library, including routing, clustering, timesync, localization, security and more algorithms)
- IPv6
- TCP and UDP
- 6LoWPAN
- RPL
GETTING STARTED
- You want to start the RIOT? Just follow our Getting started documentation
- The RIOT API itself can be built from the code using doxygen. The latest version is uploaded daily to http://riot-os.org/api.
USING THE NATIVE PORT WITH NETWORKING
If you compile RIOT for the native cpu and include the nativenet module, you can specify a network interface like this: PORT=tap0 make term
SETTING UP A TAP NETWORK
There is a shellscript in RIOT/cpu/native called tapsetup.sh which you can use to create a network of tap interfaces.
USAGE To create a bridge and two (or count at your option) tap interfaces: ./tapsetup.sh create [count]
EXAMPLE APPLICATIONS
In the examples directory you can find some example applications. The default application demonstrates all available features for the current platform.
For example, you can use it to the test the native networking by running two instances: make term PORT=tap0 and make term PORT=tap1. Now configure two different addresses for both RIOT instances by typing addr 1 and addr 2 respectively and send a text message from one "node" to another by typing txtsnd 2 hello on the first "node".
CONTRIBUTE
To contribute something to RIOT, please refer to the development procedures and read all notes for best practice.
MAILING LISTS
- RIOT OS kernel developers list
- devel@riot-os.org (http://lists.riot-os.org/mailman/listinfo/devel)
- RIOT OS users list
- users@riot-os.org (http://lists.riot-os.org/mailman/listinfo/users)
- RIOT commits
- commits@riot-os.org (http://lists.riot-os.org/mailman/listinfo/commits)
- Github notifications
- notifications@riot-os.org (http://lists.riot-os.org/mailman/listinfo/notifications)
LICENSE
- All sources and binaries that have been developed at Freie Universität Berlin are licensed under the GNU Lesser General Public License version 2 as published by the Free Software Foundation.
- Some external sources, especially files developed by SICS are published under a separate license.
All code files contain licensing information.
For more information, see the RIOT website: