b801d57f0c
Merge pull request #15555 from dylad/pr/makefiles/dfu_optionnal_dfuse
...
boards: move DfuSe specific argument at board level
2020-12-09 14:08:50 +01:00
dylad
47f8d69845
boards: update boards using DfuSe
...
Update these boards to make use of a new argument to keep using DfuSe mode of dfu-util
2020-12-09 11:48:37 +01:00
75d2002e76
boards/stm32f1/f3: adapt Kconfig for clock configuration
2020-12-08 17:36:52 +01:00
39e06babf5
boards/stm32: use generic clk_conf.h header
2020-10-27 08:44:56 +01:00
e9bf08e6d5
boards/stm32f1*: adapt to new clock configuration
2020-09-24 11:27:24 +02:00
1b8460d68f
boards/stm32f1: use shared default clock configuration
2020-08-31 08:40:17 +02:00
hugues
228a71f96e
boards/common/blxxxpill/include/periph_conf.h: reorder adc_config[]
2020-08-27 23:27:42 +02:00
hugues
c6362a5441
boards/common/blxxxpill: declare adc_config[] directly in periph_conf.h
2020-08-27 03:56:26 +02:00
hugues
6c35a6a69f
boards/common/blxxxpill: DMA feature added
2020-08-19 18:25:03 +02:00
2068c11837
blxxxpill: remove obsolete spi_divtable
2020-08-18 16:55:02 +02:00
589e187f17
boards/common/blxxxpill: model features in Kconfig
2020-07-16 11:34:03 +02:00
Gabriel Moyano
2367ff3885
boards/blxxxpill: add TIM1, TIM3 and TIM4 as qdec dev
2020-05-29 22:08:25 +02:00
facb626b02
boards/stm32*: adapt for new stm32 cpu organization
2020-05-20 13:39:10 +02:00
benpicco
e45777d077
Merge pull request #13809 from Vinggui/master
...
Added a new flashing parameter for generic cheap St-link and bluepill(-128kib) boards.
2020-05-12 11:48:43 +02:00
Vinicius G. Guimaraes
f8776a989f
boards/blxxxpill: add support for stm32duino bootloader and for generic St-Link V2.
2020-05-04 19:36:15 -07:00
Francisco Molina
b78e4efb56
cpu/stm32f1: dont provide periph_rtc at cpu level
...
stm32f1 periph_rtc implementation gets a 1s resolution by dividing
CLOCK_LSx by 32768. This only make sense if CLOCK_LSE is set,
otherwise CLOCK_LSI=~40000, which will lead to an imprecise rtc.
2020-04-27 08:59:21 +02:00
Francisco Molina
a72abe5903
boards/common/blxxxpill: provide periph_rtt
2020-04-24 10:44:57 +02:00
Hoernchen20
c64f7f72c2
boards/common/blxxxpill: Drop ADC lines used for stdio
2020-04-22 21:16:20 +02:00
Hoernchen20
4e87682ba1
boards/common/blxxxpill: Add internal ADC lines
2020-04-22 21:08:20 +02:00
Gunar Schorcht
5b8d503bc9
boards/common/blxxxpill: fix broken links
2020-03-24 10:38:40 +01:00
631fbd9fc8
boards/blxxxpill: rework programmer specific configuration
2020-03-10 11:42:10 +01:00
f56470925b
boards: include common dfu logic where applicable
2020-03-10 11:42:10 +01:00
Marian Buschsieweke
8fd8c8273f
boards/{nucleo-f103rb,b*pill}: Expose JTAG pins as GPIOs
...
The Nucleo-F103RB comes with an internal SWD programmer/debugger. Thus, the JTAG
pins are not going to be used for debugging / programming anyway. The pins are
exposed on the headers, so allowing them to be used as GPIOs make a lot of
sense.
The Bluepill / Blackpill boards only expose the SWD pins on the debug header,
but the JTAG pins (not also used by SWD) are exposed on the GPIO pin headers.
Hence, exposing them as regular GPIOs seems to be a reasonable choice.
2020-03-08 13:06:34 +01:00
kcant
f770c6fffd
Update doc.txt
...
Broken links correction to https://web.archive.org/web/20190428082446/ *
2019-12-28 18:38:27 +01:00
Marian Buschsieweke
c510ad858c
boards/common/blxxxpill: Use STM32 programmer conf
2019-11-12 19:48:05 +01:00
Gaëtan Harter
fc9f2a0f65
boards: remove duplicate include 'RIOTCPU/cpu/Makefile.features'
...
When 'CPU' is defined, the CPU Makefile.features is included by the
build system in the main Makefile.features.
No need to do it manually anymore.
2019-09-30 12:38:01 +02:00
243b02d8e0
boards/blxxxpill: move CPU/CPU_MODEL to Makefile.features
2019-09-29 18:51:41 +02:00
Marian Buschsieweke
09d1dcf6b3
boards: Split off 128KiB version of bl*pill
...
- Created new `bluepill-128kib` as 128KiB version of the `bluepill`
- Created new `blackpill-128kib` as 128KiB version of the `blackpill`
- Updated `openocd.cfg` to allow flashing 128KiB of ROM
2019-09-29 16:42:44 +02:00