Marian Buschsieweke
d3d2cdae8a
drivers/ws281x: Fix dependencies
...
arch_esp32 was missing in FEATURES_REQUIRED_ANY for the ws281x, resulting in
ESP32 boards incorrectly being reported as unsupported.
2020-04-09 13:30:18 +02:00
Leandro Lanzieri
6e49724a66
drivers/Makefile.dep: Set CONFIG_MRF24J40_USE_EXT_PA_LNA if not Kconfig
...
For the mrf24j40 check if Kconfig is being used before setting the
configuration CFLAG.
2020-04-08 18:49:32 +02:00
Leandro Lanzieri
ede9117a1e
drivers/mrf24j40: Turn MRF24J40_USE_EXT_PA_LNA into bool config
...
MRF24J40_USE_EXT_PA_LNA is moved to the 'CONFIG_' namespace and by
default is not set. Now it is checked in code using 'IS_ACTIVE'.
2020-04-08 18:49:30 +02:00
067b324645
Merge pull request #11945 from benpicco/EEPROM-m95m01
...
drivers: add driver for AT25xxx family of EEPROMs
2020-04-07 13:19:21 +02:00
Benjamin Valentin
97fc2f2af1
drivers: add AT25xxx series EEPROM
...
This adds a driver for the ST M95xxx series SPI EEPROMs.
The driver has been tested with the M95M01 EEPROM, but should
work with other chips from that family.
SPI-EEPROMs from other vendors from the families AT25xxx, 25AAxxx,
25LCxxx, CAT25xxx & BR25Sxxx should also in the same way.
2020-04-07 12:31:46 +02:00
Leandro Lanzieri
c74544c9ec
Merge pull request #13349 from maribu/dependency-or
...
build system: Restructure dependency resolution
2020-04-02 10:40:44 +02:00
benpicco
660b1a9b5f
Merge pull request #10083 from gschorcht/drivers_hmc5883l
...
drivers: add driver for Honeywell HMC5883L magnetometer
2020-04-01 14:49:34 +02:00
Gunar Schorcht
e6090adb3f
drivers: add hmc5883l device driver
2020-04-01 13:37:22 +02:00
Marian Buschsieweke
007ac492ff
drivers/ws281x: Use FEATURES_REQUIRED_ANY
2020-04-01 09:12:50 +02:00
Christian Friedrich Coors
08703766fc
drivers/ws281x: Add ESP32 support
2020-03-25 17:25:35 +01:00
Francisco
cdbf0b2d69
Merge pull request #13583 from benpicco/at86rf215-minimal
...
drivers/at86rf215: add basic support for AT86RF215 dual-band radio
2020-03-20 09:33:50 +01:00
benpicco
5435792034
Merge pull request #12277 from benemorius/pr/kw41zrf
...
drivers: add kw41zrf
2020-03-20 00:49:56 +01:00
Joakim Nohlgård
5bd67d88a8
drivers/kw41zrf: Transceiver driver for the KW41Z radio
...
This is the radio found in NXP Kinetis KW41Z, KW21Z. Only 802.15.4 mode
is implemented (KW41Z also supports BLE on the same transceiver).
The driver uses vendor supplied initialization code for the low level
XCVR hardware, these files were imported from KSDK 2.2.0 (framework_5.3.5)
2020-03-19 17:00:04 -05:00
Benjamin Valentin
cd2b86c4b1
rtt_rtc: add RTT based RTC implementation
2020-03-19 15:25:14 +01:00
Benjamin Valentin
d35511bee7
drivers/at86rf215: Add basic driver for the AT86RF215 radio
...
This adds a driver for the SPI based AT86RF215 transceiver.
The chip supports the IEEE Std 802.15.4-2015 and IEEE Std 802.15.4g-2012 standard.
This driver supports two versions of the chip:
- AT86RF215: dual sub-GHz & 2.4 GHz radio & baseband
- AT86RF215M: sub-GHz radio & baseband only
Both radios support the following PHY modes:
- MR-FSK
- MR-OFDM
- MR-O-QPKS
- O-QPSK (legacy)
The driver currently only implements support for legacy O-QPSK.
To use both interfaces, add
GNRC_NETIF_NUMOF := 2
to your Makefile.
The transceiver is able to send frames of up to 2047 bytes according to
IEEE 802.15.4g-2012 when operating in non-legacy mode.
Known issues:
- [ ] dBm setting values are bogus
- [ ] Channel spacing for sub-GHz MR-O-QPSK might be wrong
- [ ] TX/RX stress test will lock up the driver on openmote-b
2020-03-19 14:39:18 +01:00
Gunar Schorcht
c4325e4d5e
drivers/bme680: add SAUL capabilities
2020-03-12 08:52:10 +01:00
Gunar Schorcht
9dd11eb188
drivers: add support for BME680 driver
...
Add the support for BME680 based on the BME680 vendor driver package.
2020-03-12 08:42:59 +01:00
Schorcht
7548a6e849
drivers: add APDS99XX ALS and proximity
2020-03-11 14:21:47 +01:00
Martine Lenders
ff425576a0
slipdev_stdio: provide stdio multiplexing over SLIP
2020-03-06 08:58:45 +01:00
Jan Mohr
aa5ffe5a6d
drivers/lis2dh12: added interrupt function
2020-03-04 17:01:58 +01:00
benpicco
aa1c23d4bd
Merge pull request #11929 from fabian18/driver-at24cxxx-eeprom
...
Driver for AT24CXXX EEPROM
2020-02-25 18:16:45 +01:00
fabian18
2c77ee4cab
drivers/at24cxxx: at24cxxx EEPROM driver
2020-02-24 14:00:25 +01:00
Michel Rottleuthner
c4093c29a4
drivers: add driver for Sensirion SPS30 particulate matter sensor
2020-02-20 14:26:55 +01:00
Benjamin Valentin
d3ace2e821
drivers: add at24mac driver
...
The AT24MAC is an EEPROM that provides unique ID functionality.
On one address it provides normal AT24xxx EEPROM operations, but
on a seperate i2c address a read-only EUI-64 and a 128-bit ID are
provided.
This adds a simply driver for this chip.
2020-02-13 15:58:43 +01:00
1bc842707a
drivers/stmpe811: add implementation
2020-02-13 09:14:51 +01:00
Francisco Molina
802216ce53
Makefile.dep: add auto_init_at86rf2xx MODULE
2020-02-12 16:51:27 +01:00
benpicco
f5b6544123
Merge pull request #13329 from wosym/pr/bh1900nux
...
Add bh1900nux driver
2020-02-12 11:16:23 +01:00
Wouter Symons
a2d9389373
Add bh1900nux driver
2020-02-12 07:34:22 +01:00
7a88279ffe
drivers/ili9341: add missing xtimer module dependency
2020-02-11 19:42:43 +01:00
Benjamin Valentin
11d77271cf
drivers/ws281x: introduce WS281X_HAVE_INIT
...
This brings the backend-dependant init() function in line with
`WS281X_HAVE_PREPARE_TRANSMISSION` and `WS281X_HAVE_END_TRANSMISSION`.
2020-02-10 14:45:26 +01:00
Benjamin Valentin
8352e4aae0
drivers/ws281x: add VT100 backend for native
...
To quickly iterate on animations it is handy to being able to simulate
the output on native.
This adds a VT100 terminal backend to the ws281x driver that outputs
the colors straight to the terminal.
2020-02-10 14:40:15 +01:00
746278a118
drivers/itg320x: set xtimer as dependency
2020-01-11 18:10:09 +01:00
Schorcht
71772cc3b3
drivers: add driver for ITG320X 3-axis gyroscope
2020-01-11 08:02:34 +01:00
benpicco
87f86c4c08
Merge pull request #12924 from daexel/shtc1_bugfix
...
drivers/shtc1: Initial support for the SHTC1 temperature and humidity sensor
2019-12-16 18:21:48 +01:00
steffen
fa05cf0c5d
Driver/shtc1: add saul integration
...
- add saul integration
- uncrustified
- SAUL/DRIVER tests
2019-12-16 15:29:04 +01:00
Jue
bc46c7478f
drivers: add Differentially Operated Serial Ethernet driver
2019-12-16 10:43:13 +01:00
Benjamin Valentin
22c2dbbbe5
drivers/sht3x: use crc8 function from common code
...
This makes the sht3x driver use the crc-8 routine from sys/hashes.
It's the same code, was just moved to a common place.
2019-12-13 14:50:32 +01:00
a9bf69146b
Merge pull request #9948 from bergzand/pr/ili9341
...
ili9341: Initial import of ili9341 LCD driver
2019-12-11 16:43:46 +01:00
ef4dcb8eec
ili9341: Initial include
...
This commit adds support for the ili9341 display
2019-12-11 16:18:37 +01:00
2f65bacc7d
drivers: fix sort Makefile.dep/include files
2019-12-11 15:31:58 +01:00
benpicco
a21fe4ae87
Merge pull request #12259 from daexel/dcf77
...
drivers/dcf77:Inital Support DCF77
2019-11-25 16:20:51 +01:00
Marian Buschsieweke
16ee7aed32
Merge pull request #11350 from maribu/ina2xx
...
drivers/ina220: Changed to comply with RIOT's driver design goals & SAUL adaption
2019-11-22 23:36:50 +01:00
benpicco
09f647eee2
Merge pull request #12693 from maribu/neopixel-atmega
...
drivers: Added WS281x RGB LED driver for ATmega platform
2019-11-22 22:36:36 +01:00
Marian Buschsieweke
f424421f79
drivers: Renamed ina220 --> ina2xx
...
The INA219 has the exact same interface as the INA220 (including values and
semantics of the configuration register). Thus, this driver can be used for
both. The ina220 has been renamed to ina2xx to reflect this and pseudo modules
for the ina220 and ina219 have been added.
2019-11-22 19:53:51 +01:00
Hauke Petersen
b7f33bd84f
drivers/bmx280: significant driver rework
...
bugs fixed:
- move global variables into device descriptor
- guard bus access (use acquire and release)
added functionality:
- enable SPI mode
structural improvements:
- reduce stack usage
- simplify the driver's structure
- centralize bus access code
- use assertions
- cleanup includes
- use shortcuts for bus access
style changes:
- fix line length
- cleanup and improve doxygen
- unify pointer notation (char *var over char* var)
- unify (error) return messages
- use `#ifdef MODULE_BME280` instead of `#if defined(BME..)`
- unify debug messages -> using `[bmx28] x: msg` scheme
2019-11-22 14:04:37 +01:00
Michel Gerlach
2a14b6ceb8
Drivers/DCF77:First implementation
2019-11-22 10:27:01 +01:00
Marian Buschsieweke
1ed1906023
drivers/ws281x: Added driver for RGB LEDs
...
Added driver for the WS2812/SK6812 RGB LEDs often sold as NeoPixels, which due
to their integrated RGB controller can be chained to arbitrary length and
controlled with a single GPIO.
2019-11-18 22:45:24 +01:00
79943cb0de
drivers/pca9685: blacklist efm32 arch
...
The CPU doesn't support PWM_RIGHT
2019-11-16 14:08:49 +01:00
Hauke Petersen
ca7578073a
drivers: add support for QMC5883L mag sensors
2019-11-13 12:56:26 +01:00
fabian18
195379a9b8
drivers/ina3221: INA3221 driver implementation
2019-11-05 12:29:42 +01:00
