Juergen Fitschen
a1b3a80985
boards/samr30-xpro: add SPI dev for ext pin header
2020-05-23 14:01:08 +02:00
Juergen Fitschen
ee0a254a21
boards/samr30-xpro: fix identation
2020-05-23 14:01:08 +02:00
Juergen Fitschen
a9305e47f7
boards/samr30-xpro: add notes on peripheral definition
2020-05-23 14:01:08 +02:00
facb626b02
boards/stm32*: adapt for new stm32 cpu organization
2020-05-20 13:39:10 +02:00
benpicco
e7bf1ef706
Merge pull request #13654 from benpicco/serpente-r2
...
boards/serpente: add serpente board
2020-05-20 11:31:40 +02:00
Benjamin Valentin
cddb929d0c
boards/serpente: add serpente board
...
See https://serpente.solder.party
2020-05-20 10:39:38 +02:00
8bc0492334
Merge pull request #14090 from bergzand/pr/boards_stm32f4/disable_uart_dma
...
boards/stm32f4: Remove incorrect UART DMA config from stm32f4 boards
2020-05-20 09:12:27 +02:00
28f00f731f
boards/stm32: remove obsolete UART DMA ISR defines
2020-05-20 08:49:22 +02:00
d8ec0b292f
boards/stm32f4: Set DMA_STREAM_UNDEF for UART DMA
...
This PR sets the DMA configuration for the UART peripherals on the
stm32f4 boards to the undef value to disable the DMA. This to prevent
from accidentally configuring the DMA to stream 0 channel 0 when
enabling DMA.
2020-05-20 08:49:22 +02:00
cf6ab10abc
Merge pull request #13861 from maribu/nucleo-f767-spi
...
boards/nucleo-f767zi: Fix SPI config
2020-05-19 21:00:11 +02:00
Marian Buschsieweke
f56a0a5128
boards/nucleo-f767zi: Remap MOSI of SPI1 when used with stm32_eth
...
PA7 is the default MOSI pin, as it is required for compatibility with
Arduino(ish) shields. Sadly, it is also connected to the RMII_DV of
Ethernet PHY. This commit works around this by remapping the MOSI to PB5 when
the on-board Ethernet PHY is used.
2020-05-19 20:30:24 +02:00
Benjamin Valentin
59f3c1b48b
boards/samd21-arduino-bootloader: add support for UF2 bootloader
2020-05-19 16:58:58 +02:00
benpicco
9f707bf121
Merge pull request #14057 from bergzand/pr/nrf52/dma_spi
...
nrf52: Implement EasyDMA-based SPI peripheral implemenation
2020-05-18 19:42:33 +02:00
e76ee57b35
ruuvitag: Adapt SPI periph config
2020-05-18 19:18:30 +02:00
e1d7d3d838
reel: Adapt SPI periph config
2020-05-18 19:18:30 +02:00
c90bc72ce9
pinetime: Adapt SPI periph config
2020-05-18 19:18:30 +02:00
d15987bc9b
nrf52dk: Adapt SPI periph config
2020-05-18 19:18:30 +02:00
93acc998c4
nrf52840dk: Adapt SPI periph config
2020-05-18 19:18:30 +02:00
f42a796c02
feather-nrf52840: Adapt SPI periph config
2020-05-18 19:18:29 +02:00
1e15bb2680
particle-mesh: Adapt SPI periph config
2020-05-18 19:18:29 +02:00
628d3e9080
nrf52: Adapt SPI periph config
2020-05-18 19:18:29 +02:00
88c244bc75
arduino-nano-33-ble: Adapt SPI periph config
2020-05-18 19:18:29 +02:00
919ca1c4b5
adafruit-clue: Adapt SPI periph config
2020-05-18 19:18:29 +02:00
825c4c8cb7
acd52832: Adapt SPI periph config
2020-05-18 19:18:29 +02:00
benpicco
22b2f3664f
Merge pull request #14089 from maribu/atmega_cpu_cleanup
...
cpu/atmega{_common,32u4}: Cleanup
2020-05-16 19:17:29 +02:00
Marian Buschsieweke
2f3961690e
cpu/atmega_common: Add feature PUF_SRAM
...
The feature is implemented in `cpu/atmega_common`, so we can just enable it for
all ATmega boards.
2020-05-15 11:31:23 +02:00
Marian Buschsieweke
4d1a5b9256
cpu/atmega_common: Drop legacy include
...
Drop `#include "irq.h"` in `cpu.h`, which was there for a legacy work around.
A bunch of missing includes of `irq.h` materialized due to this and were
fixed.
2020-05-15 11:24:28 +02:00
Marian Buschsieweke
7cf49d145d
boards/common/nrf52: Allow external boards
...
Replace `$(RIOTBOARD)/$(BOARD)` with `$(BOARDDIR)`, which also works for
external boards. This allows external boards to build on top of
`$(RIOTBOARD)/common/nrf52`.
2020-05-14 13:56:12 +02:00
benpicco
e3591535ce
Merge pull request #13972 from Citrullin/nrf52_bmp
...
Add bmp config for nrf52
2020-05-12 16:59:34 +02:00
Philipp Blum
3240dfc0b2
boards/common/nrf52: add config for bmp
2020-05-12 15:54:38 +02:00
Marian Buschsieweke
966b0e22e5
boards/microduino-corerf: Fix duplicated includes
...
avrdude.mk and serial.mk was included twice. As a result of the former, avrdude
wasted one flash cycle and some time by writing the same firmware twice.
2020-05-12 15:00:14 +02:00
benpicco
e45777d077
Merge pull request #13809 from Vinggui/master
...
Added a new flashing parameter for generic cheap St-link and bluepill(-128kib) boards.
2020-05-12 11:48:43 +02:00
aa2e84218f
Merge pull request #14052 from bergzand/pr/nrf52840dk/add_mtd
...
nrf52840dk: Add MTD configuration
2020-05-11 13:01:33 +02:00
4f41c60e05
nrf52840dk: Add MTD configuration
2020-05-11 10:26:29 +02:00
chrysn
1c0bdede8d
boards/nrf52840dongle: Add support
...
It includes per-board support for the nrfutil programmer used with its
default bootloader; this is not generalized over Adafruit's boards as
they use incompatible versions of nrfutil.
2020-05-08 14:49:46 +02:00
Marian Buschsieweke
ee50546f80
boards/atmega328p: Fix duplicated includes
...
avrdude.mk and serial.mk was included twice. As a result of the former, avrdude
wasted one flash cycle and some time by writing the same firmware twice.
2020-05-06 20:28:34 +02:00
Marian Buschsieweke
9c042eb388
boards/atmega1284p: Default programmer, fix doc
...
The AVR Dragon, previously the cheapest debugger/programmer for AVR, is out of
production. The default debugger for AVR devices has been changed to the Atmel
ICE, the now cheapest debugger option. The commit updates the documentation
accordingly.
Additionally the default programmer is changed to the Atmel ICE for consistency.
The doc is updated accordingly.
2020-05-06 20:28:33 +02:00
Marian Buschsieweke
6c203deb7d
boards/atmega1284p: Fix duplicated includes & typo
...
- avrdude.mk and serial.mk were included twice.
- The former resulted in `make flash` wasting one flash cycle by flashing
the same firmware twice
- Fixed typos (atmega328p instead of atmega1284p)
2020-05-06 20:27:42 +02:00
5773db93f8
Merge pull request #14025 from fjmolinas/pr_nrf5x_rtt_conf
...
boards/common/nrf5x: add configurable RTT_FREQUENCY
2020-05-05 17:46:05 +02:00
343dc3f90f
Merge pull request #13909 from fjmolinas/pr_stm32_rtt
...
cpu/stm32_common: make RTT_FREQUENCY configurable
2020-05-05 16:45:39 +02:00
Francisco Molina
409185c5ce
boards/common/nrf5x: add configurable RTT_FREQUENCY
...
Adds: RTT_MAX_FREQUENCY, RTT_MIN_FREQUENCY & RTT_CLOCK_FREQUENCY
2020-05-05 14:52:55 +02:00
Francisco Molina
fc644cc2c2
boards/nucleo-f413zh: use common rtt config
2020-05-05 14:36:32 +02:00
Francisco Molina
b5bcf26e0f
cpu/stm32_common: make RTT_FREQUENCY configurable
...
Adds: RTT_MAX_FREQUENCY, RTT_MIN_FREQUENCY & RTT_CLOCK_FREQUENCY
2020-05-05 14:36:31 +02:00
benpicco
4631c6452b
Merge pull request #14018 from benpicco/boards-purge-gnrc_netdev_default
...
boards: purge gnrc_netdev_default from Makefile.dep
2020-05-05 14:22:08 +02:00
Benjamin Valentin
dc58ef59ae
boards: remove duplicate gnrc_netdev_default from Makefile.dep
...
`gnrc_netdev_default` will pull in `netdev_default`, so no need to
check for both in `Makefile.dep`
2020-05-05 09:58:45 +02:00
Vinicius G. Guimaraes
f8776a989f
boards/blxxxpill: add support for stm32duino bootloader and for generic St-Link V2.
2020-05-04 19:36:15 -07:00
benpicco
3c03394e1e
Merge pull request #13820 from francois-berder/pic32-gpio-irq
...
cpu: mips_pic32_common: Implement GPIO IRQ
2020-05-04 18:36:48 +02:00
Dylan Laduranty
57c1a49a82
Merge pull request #13957 from benpicco/cpu/samd21-pwm_flex
...
cpu/samd21: PWM don't hard-code number of channels to 3
2020-05-02 20:52:56 +02:00
Dylan Laduranty
76870721fe
Merge pull request #13965 from benpicco/cpu/sam0_common/periph/dac
...
cpu/sam0_common: implement periph/dac
2020-05-02 20:34:40 +02:00
Francois Berder
937a30eca7
boards: 6lowpan-clicker: Update GPIO SAUL configuration for buttons
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2020-05-02 17:59:17 +01:00
