The currently supported SAM0 MCUs (samd21, saml21, saml1x) share the same
Timer peripheral, yet each of them carries it's own copy of the Timer
driver.
This introduces a new timer driver that is common for all sam0 MCUs and
uses structs for configuration instead of defines.
UART devices are now configured using static array in header files instead of static variables in implementation to be able to define UART_NUMOF using the size of the array instead of a variable.
SPI devices are now configured using static array in header files instead of static variables in implementation to be able to define SPI_NUMOF using the size of the array instead of a variable.
I2C devices are now configured using static array in header files instead of static variables in implementation to be able to define I2C_NUMOF using the size of the array instead of a variable.
DAC pins are now configured using static arrays in header files instead of static variables in implementation to be able to define DAC_NUMOF using the size of these arrays instead of a variable.
ADC pins are now configured using static arrays in header files instead of static variables in implementation to be able to define ADC_NUMOF using the size of these arrays instead of a variable.
Added file with clock settings for STM32-F7 CPUs with a core clock of 216MHz,
an external high speed clock of 8 MHz and external low speed clock (32.768kHz)
enabled.
Add a rule to build `lpc2k_pgm` when flashing.
It is only compiled if it is using the one in `tools`.
If overwritten to `lpc2k_pgm` if it should be taken from the path,
it is not compiled.
The compilation is still done in `boards/common/msba2/tools` as it was
the case before and this commit does not address this.
Add motor_driver driver configuration example.
The most simple motor driver type is used here (MOTOR_DRIVER_1_DIR) which
needs only one pin to work.
This example uses already configured PWM channels and 2 free GPIOS.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
A common configuration file is introduced for stm32f4 with core clock
at 168MHz with HSE at 8MHz, 2 configuration files are introduced to²:
distinguish between clock configuration with and without LSE.
- Moved code for periph_conf of all ATmega based boards to boards/common/atmega
- Added possibility to override config from individual board:
- Named file `periph_conf_atmega_common.h` and let this be included from
`board/$BOARD/include/periph_conf.h` to allow modifications
- Guarded individual periph configs by `#ifndef $PERIPH_NUMOF` ... `#endif`
Features must be provided by the board if they're actually
available on board. Other features might be provided by the
CPU.
Some grouping is also removed as it is not necessary.
Leverages common flasher (avrdude) and removes unnecessary exports.
Moreover, a reuse of serial.inc.mk is perfomed from the same
atmega_common/Makefile.include
