MrKevinWeiss
0ad94e1b4b
drivers/include/i2c: Fix API documentation
...
The write_reg/s states a repeated start write is used but that is not how the i2c is implemeneted.
Most devices also only use a continuous write so the API should be changed to match implementation and the majority of sensors.
2018-12-10 09:56:40 +01:00
MrKevinWeiss
e14e6ead92
drivers/periph_common/i2c: Add not supported codes
...
This commit returns accurate error codes and prevents improper i2c states.
If since i2c_read_reg and i2c_write_reg are full frames the I2C_NOSTOP/START commands should not be supported
2018-12-10 09:49:18 +01:00
Sebastian Meiling
7f1436536e
Merge pull request #10561 from MrKevinWeiss/pr/adduarttofrdmk22f
...
boards/frdm-k22f: Add second UART to config
2018-12-10 09:35:58 +01:00
Gaëtan Harter
5a2609c573
Merge pull request #10439 from jcarrano/ensure-value
...
makefile/utils: Add a function for checking that a string is not empty.
2018-12-07 19:17:37 +01:00
Gaëtan Harter
cd35eddada
Merge pull request #10344 from jcarrano/makefile.include-cannot-be-made
...
Makefile.include: remove rule to remake PKGs' Makefile.include
2018-12-07 18:33:49 +01:00
Gaëtan Harter
9d252a883e
tests/build_system_utils: add test for build system utilities
...
This will allow testing the build system 'utils' functions.
2018-12-07 18:19:38 +01:00
Juan Carrano
f466171053
makefiles/utils: add tests for checks.mk.
...
make -f test-checks.mk test-ensure_value should succeed, while
make -f test-checks.mk test-ensure_value-negative should fail.
2018-12-07 18:19:38 +01:00
Juan Carrano
547d9f0802
makefiles/utils: Add a function for checking that a string is not empty.
...
A call to `$(ensure_value x,y)` will fail with message y if x is empty, and
otherwise return x. This can be useto write more compact makefiles, while still
producing friendly error messages.
2018-12-07 18:19:34 +01:00
Juan Carrano
8945a9513e
Makefile.include: remove rule to remake PKGs' Makefile.include
...
This rule is not being used, it complicates the makefile and causes
make clean to permform unnecessary actions.
All packages have a Makefile.include, so the rule is not needed anyways.
Also, it is defined with a double colon for no reason.
2018-12-07 17:49:22 +01:00
Kevin "Bear Puncher" Weiss
35626eda50
Merge pull request #10270 from cladmi/pr/make/pre_post_include
...
Makefile.include: allow specifying makefiles to be parsed
2018-12-07 17:42:21 +01:00
Gaëtan Harter
e47fea7bf5
doc/advanced-build-system-tricks.md: add a doc for new variables
...
Add a documentation page for advanced low level tricks.
Document the `RIOT_MAKEFILES_GLOBAL_PRE` and
`RIOT_MAKEFILES_GLOBAL_POST`.
I could not work around to have `$(RIOTBASE)/Makefile.include` in the
doc as the `$()` part was removed, so I kept with `$RIOTBASE` for now.
2018-12-07 17:05:51 +01:00
Juan I Carrano
d505b01d71
Merge pull request #10568 from smlng/pr/make/docker
...
makefiles/docker: fix mounting localtime on OSX
2018-12-07 15:52:17 +01:00
Hauke Petersen
a24f669c4c
Merge pull request #10521 from miri64/gnrc_sixlowpan_iphc/fix/non-ieee802154-support
...
gnrc_sixlowpan_iphc: allow address compression for non-IEEE802.15.4
2018-12-07 14:58:13 +01:00
Juan I Carrano
744edf3b96
Merge pull request #10570 from dylad/pr/update_edbg
...
dist/tools/edbg: update to lastest version
2018-12-07 14:45:45 +01:00
Hauke Petersen
bdc1b89c93
Merge pull request #10520 from miri64/gnrc_netif_hdr/enh/conv-iid-getter
...
gnrc_netif_hdr: provide wrappers for gnrc_netif_ipv6_iid_from_addr()
2018-12-07 14:37:07 +01:00
Sebastian Meiling
cae865e71e
make/docker: adapt mount of localtime
...
Mounting `/etc/localtime` directly does not work on macOS (anymore).
However, by resolving the symlink to its real path docker can handle
the mount.
2018-12-07 14:00:19 +01:00
Martine Lenders
a7e3791f3b
gnrc_sixlowpan_iphc: allow address compression for non-IEEE802.15.4
2018-12-07 13:03:40 +01:00
Martine Lenders
4d4e96f9f9
gnrc_netif_hdr: provide wrappers for gnrc_netif_ipv6_iid_from_addr()
...
For convenience ;-).
2018-12-07 12:59:37 +01:00
Dylan Laduranty
f01bc4dc1d
dist/tools/edbg: update to lastest version
...
Signed-off-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
2018-12-07 10:49:38 +01:00
Hauke Petersen
e8535f23a2
Merge pull request #10567 from haukepetersen/add_eui48
...
net: add eui48 type including IPv6 IID conversion funcs
2018-12-06 22:38:02 +01:00
Hauke Petersen
bd4893277e
net/ethernet: remove get_iid() function
...
the fuctionality was moved into eui48_to_ipv6_iid()
2018-12-06 22:02:01 +01:00
Hauke Petersen
c8aaea4288
drivers/netdev_eth: use eui48 for IID generation
2018-12-06 22:02:01 +01:00
Hauke Petersen
ec37ff5825
gnrc/netif: use eui48_x() for IID handling
2018-12-06 22:02:01 +01:00
Hauke Petersen
f5355ba36e
net: add generic EUI-48 header
2018-12-06 22:02:01 +01:00
Martine Lenders
eead6066dd
Merge pull request #10565 from haukepetersen/fix_gnrc_netifinternalvoiddefs
...
gnrc/netif/internal: fix copy-paste error
2018-12-06 19:30:21 +01:00
Martine Lenders
be7e42a888
Merge pull request #10562 from miri64/gnrc_ipv6/fix/hl0
...
gnrc_ipv6: fix hop-limit == 0 case
2018-12-06 18:54:53 +01:00
Hauke Petersen
fe7fba7674
gnrc/netif/internal: fix copy-paste error
...
the names for iid_from_addr and iid_to_addr functions in the
else-block were switched around, so this fixes that
2018-12-06 17:16:23 +01:00
Martine Lenders
9bb458dac1
Merge pull request #10229 from miri64/gnrc_ipv6_ext/enh/shortcut-forward
...
gnrc_ipv6_ext: use send for forwarding with RH
2018-12-06 16:17:50 +01:00
Hauke Petersen
92fcb4de6a
Merge pull request #10513 from miri64/gnrc_netif/enh/iid-conversion
...
gnrc_netif: add general IID to/from l2addr conversion functions
2018-12-06 15:57:06 +01:00
Martine Lenders
f757376fc6
tests/gnrc_sock_udp: mark arduino-atmega2560 for insufficient memory
2018-12-06 15:39:00 +01:00
Hauke Petersen
1b1802aaf6
Merge pull request #10469 from miri64/gnrc_ndp/enh/rtr-wo-arsm
...
gnrc_ndp: make compilable for router without ARSM
2018-12-06 15:38:38 +01:00
Juan I Carrano
a38cb6c63e
Merge pull request #10461 from cladmi/pr/make/clean_all_docker_container
...
Makefile.include: building in docker should be done after clean
2018-12-06 15:36:25 +01:00
Martine Lenders
bc7d083094
gnrc_ipv6: fix hop-limit == 0 case
2018-12-06 15:34:06 +01:00
Gaëtan Harter
efddd4aef9
Makefile.include: allow specifying makefiles to be parsed
...
This allows specifying a list of files that should be parsed by make at
the beginning and at the end of Makefile.include.
It is a generic mechanism to allow specifying system wide configuration:
* Globally overwrite the 'TERMPROG'
* Specify a hard written port / debug_adapter_id for some BOARD values
* Define you own specific targets
* Override default targets
It can include file before and after Makefile.include to allow handling
different configurations.
2018-12-06 14:49:34 +01:00
Martine Lenders
b530c1bb94
gnrc_ipv6_ext: use send for forwarding with RH
...
Though this change might seem more complicated, it has the benefit, that
after #9484 we don't have to assume that a received packet within IPv6's
receive function can be handed to the function pre-parsed, making that
function far less complicated (will be provided in a future PR).
Also this might give the forwarding via routing header a little
performance boost, as we now don't *receive* the packet first only to
forward it later-on.
2018-12-06 14:47:46 +01:00
MrKevinWeiss
97e84f816c
boards/frdm-k22f: Add second UART to config
...
This PR adds a second uart on two non-conflicting pins.
Since the first UART is used for shell this allows a usable UART.
2018-12-06 14:45:45 +01:00
Martine Lenders
bc1b490086
gnrc_ipv6_nib: gnrc_netif_iid_to_addr() instead of _reverse_iid()
2018-12-06 14:41:30 +01:00
Martine Lenders
a44f7f7b38
gnrc_netif: use general IID conversion function for netif-based
2018-12-06 14:41:30 +01:00
Martine Lenders
5ca30b9b03
gnrc_netif: add general IID to/from l2addr conversion functions
...
They are required to make GNRC's 6Lo IPHC implementation ready for
hardware addresses other than IEEE 802.15.4's.
2018-12-06 14:41:30 +01:00
Leandro Lanzieri
b6abbad6fb
Merge pull request #10553 from aabadie/pr/boards/feature_periph_irq_missing
...
boards/{firefly,samr30-xpro}: add missing `periph_gpio_irq` provided feature
2018-12-06 13:11:36 +01:00
Leandro Lanzieri
0838753dce
Merge pull request #10529 from gschorcht/esp8266_adc_res_fix
...
cpu/esp8266: fix of adc_res_t
2018-12-06 13:05:31 +01:00
Gaëtan Harter
135d2f7fba
Makefile.include: building in docker should be done after clean
...
When building in parallel, clean is done at the same time as the
container starts building.
So the parallel `clean all` handling should also be done for the
`..in-docker-container` target.
2018-12-06 12:34:22 +01:00
Juan I Carrano
25e165ef5b
Merge pull request #10550 from smlng/pr/docker/riot_submodule
...
make: fix BUILD_IN_DOCKER when RIOT is submodule
2018-12-06 11:52:40 +01:00
Martine Lenders
17d2e00172
Merge pull request #10557 from haukepetersen/opt_uart_docfixes
...
periph/uart: fix line length in doc header
2018-12-06 10:43:37 +01:00
Hauke Petersen
39f0e4d5d3
periph/uart: fix line length in doc header
2018-12-06 10:08:56 +01:00
1fcef246f0
Merge pull request #10552 from cladmi/pr/tests/native/disable_running_failing_tests_on_ci
...
tests/xtimer_now64_continuity|xtimer_usleep: disable running test on native
2018-12-05 21:17:52 +01:00
49aa583ab1
Merge pull request #10539 from cladmi/pr/make/openocd/flashfile_from_cli
...
openocd: get flash and debug files from cli
2018-12-05 20:32:54 +01:00
smlng
ae5608ab7f
make: use abspath for worktree mount in docker
2018-12-05 20:28:12 +01:00
e9c9fd5133
boards/samr30-xpro: add missing periph_gpio_irq feature
2018-12-05 17:56:57 +01:00
b600a908ec
boards/firefly: add missing periph_gpio_irq feature
2018-12-05 17:56:48 +01:00
