benpicco
f6eacda9f8
Merge pull request #13609 from miri64/dhcpv6-pd_ia/feat/initial
...
dhcpv6-pd_ia: initial import of a DHCPv6 server bootstrapper
2020-04-03 20:40:38 +02:00
Martine S. Lenders
0c51285b9b
dist/tools: provide DHCPv6 server support for network setup scripts
2020-04-03 17:47:39 +02:00
Martine S. Lenders
e6510cb89e
dhcpv6-pd_ia: initial import of a DHCPv6 server bootstrapper
2020-04-03 17:32:51 +02:00
Martine S. Lenders
d726af2cac
dist/tools/*/start_network.sh: ensure TUN/TAP interface
...
Previously, when the creation of the TUN/TAP interface failed in one of
the `start_network.sh` scripts, the script will fail with a cryptic
error like
> dist/tools/ethos/start_network.sh: 68: [: -eq: unexpected operator
This fix ensures, that the value of this variable checked is always set
such that in the error case, `ethos`/`sliptty` won't start.
2020-04-03 13:39:09 +02:00
Martine S. Lenders
e731397bae
dist/tools/tapsetup: fix deletion when UPLINK unset
2020-03-31 18:58:55 +02:00
Jose Alamos
e451570219
gnrc_netif: remove GNRC_NETIF_NUMOF macro
2020-03-26 11:12:23 +01:00
27811518a0
ci/buildsystem: ensure NATIVEINCLUDES is only exported in vars
2020-03-26 10:26:14 +01:00
405c0cfef5
makefiles/openocd: export OPENOCD_CMD_RESET_RUN only when required
2020-03-26 10:00:37 +01:00
0e86aae445
ci/buildsystem: ensure PRE_FLASH_CHECK_SCRIPT is not exported
2020-03-26 09:37:41 +01:00
08adbb283c
ci/buildsystem: ensure OPENOCD_PRE_FLASH_CMDS is not exported
2020-03-26 09:31:22 +01:00
4aa351c746
ci/buildsystem: ensure OPENOCD_PRE_VERIFY_CMDS is not exported
2020-03-26 09:31:21 +01:00
Thomas Stilwell
41ffaed583
dist/tools/ethos: fix typo for compiling baud rate 230400
2020-03-23 16:01:00 +01:00
7d0c475113
Merge pull request #13486 from bergzand/pr/suit/ietf_v3
...
SUIT: Update to draft-ietf-v3
2020-03-20 14:44:29 +01:00
Benjamin Valentin
ac3e996252
tapsetup: provide --uplink option
...
Add an --uplink option to tapsetup to bridge the tap-network with an
IPv6 enabled uplink interface, providing IPv6-WAN connectivity to native.
2020-03-20 14:12:43 +01:00
829f5920f0
flake8: move exception from SUITv4 to SUITv3
...
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
2020-03-19 22:56:01 +01:00
009a317b14
dist/tools/suit_v3: Add ietf-v3 manifest generator
...
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
2020-03-18 14:13:12 +01:00
8814e60fd4
Merge pull request #10482 from miri64/pyterm/enh/try-reconnect-on-error
...
pyterm: try to reconnect on SerialException during connect
2020-03-18 11:23:22 +01:00
Martine Lenders
34788abedf
Merge pull request #13618 from janosbrodbeck/pr/sliptty_shift_fix
...
sliptty/start_network.sh: fix if no argument is given
2020-03-11 19:07:27 +01:00
János Brodbeck
4cf4ac124f
sliptty/start_network.sh: fix if no argument is given
...
fix for 'shift: can't shift that many'
2020-03-11 16:47:00 +01:00
1e8037670b
Merge pull request #10420 from gschorcht/drivers_apds99xx
...
drivers: add driver for APDS99XX ambient light and proximity sensors
2020-03-11 16:27:53 +01:00
Martine Lenders
1aeae204c3
pyterm: return errno on OSError
2020-03-11 14:55:05 +01:00
Martine Lenders
7a9010fefa
pyterm: try to reconnect on SerialException during connect
...
This is what the user would do anyway.
2020-03-11 14:55:04 +01:00
Gunar Schorcht
bd3ccc4697
tools/codespell: ignore ALS (Ambient Light Sensing)
2020-03-11 14:21:47 +01:00
benpicco
d294e1d01c
Merge pull request #9572 from maribu/atmega-debug
...
On-Chip Debugging for AVR/ATmega based boards
2020-03-11 11:40:40 +01:00
Marian Buschsieweke
fa189c4c1d
dist/tools/avarice: Detect GDB automatically
...
While some users likely still use avr-gdb, more and more systems are starting
to use gdb-multiarch. In order to work in both cases, the script now just
checks which version is installed. (If both are installed, gdb-multiarch is
preferred.)
2020-03-11 10:51:40 +01:00
ad5b9d7faf
ci/buildsystem_check: force no export of JLINK_PRE_FLASH
2020-03-10 16:31:50 +01:00
5e85994abf
ci/buildsystem_check: force no export of JLINK_RESET_FILE
2020-03-10 16:30:57 +01:00
c586db5ae2
ci/buildsystem_check: ensure JLINK_IF is not exported
2020-03-10 16:29:20 +01:00
9c2e5c9b7c
ci/buildsystem_check: ensure JLINK_DEVICE is not exported
2020-03-10 16:28:26 +01:00
Marian Buschsieweke
edd93411fe
dist: De-duplicated AVR debug config & scripts
...
Use common debug.sh, debug_srv.sh and gdb.conf for all AVR boards.
2020-03-10 12:54:51 +01:00
980e06bcd6
ci/buildssytem: ensure PYOCD_ADAPTER_INIT is not exported
2020-03-08 15:12:44 +01:00
c27870face
ci/buildssytem: ensure FLASH_TARGET_TYPE is not exported
2020-03-08 15:12:44 +01:00
benpicco
2cc3d386fd
Merge pull request #13572 from miri64/sliptty/enh/global-addr
...
sliptty/start_network.sh: configure global address for SLIP interface
2020-03-08 15:04:45 +01:00
Martine S. Lenders
d43ff6df12
sliptty/start_network.sh: configure global address for SLIP interface
...
This way hosts without pre-configured IPv6 addresses can also reach
global addresses within a downstream network.
2020-03-06 11:45:05 +01:00
Martine S. Lenders
45ef9f9fe7
sliptty/start_network.sh: do not provide sliptty with -e argument
2020-03-06 11:44:42 +01:00
Martine S. Lenders
20ce69c361
sliptty/start_network.sh: add missing argument to usage
2020-03-06 11:39:37 +01:00
Benjamin Valentin
ed4d871835
dist/tools/cc2538-bsl: use upstream version
...
Automatically fetch the upstream version of cc2538-bsl.py instead
of maintaining our own fork of the tool.
fixes #13566
2020-03-06 11:13:21 +01:00
benpicco
0b1dce36ac
Merge pull request #10477 from miri64/sliptty/feat/initial
...
sliptty: introduce a new SLIP to TUN tool
2020-03-05 18:08:40 +01:00
Martine Lenders
917ba19b35
sliptty: introduce a new SLIP to TUN tool
2020-03-05 15:55:10 +01:00
Karl Fessel
563f4f6d9d
tools/backport_pr: Add Token Scope check
2020-03-04 14:30:12 +01:00
Kevin "Tristate Tom" Weiss
21395f0396
Merge pull request #13514 from benpicco/cc2538-bsl-fix
...
cc2538-bsl.py: fix ERROR: string argument without an encoding
2020-03-04 09:53:13 +01:00
ca3c256e49
Merge pull request #13430 from kaspar030/split_static_tests
...
dist: factor out static tests from build_and_test.sh
2020-03-03 18:41:25 +01:00
95d607b54d
Merge pull request #13480 from aabadie/pr/tools/openocd_export_variables
...
tools/openocd: export configuration variables only to required targets
2020-03-03 18:16:05 +01:00
f7bb189d3e
dist/tools/ci/static_tests.sh: tag base branch for Murdock
2020-03-03 14:38:13 +01:00
294b999d34
dist/tools/ci/static_tests.sh: fix shellcheck errors
2020-03-03 14:38:13 +01:00
a9768151dd
ci/buildssytem: ensure APPDEPS not exported
2020-03-03 14:19:55 +01:00
b27ae335af
ci/buildsystem_check: ensure OPENOCD_ADAPTER_INIT is not exported
2020-03-03 11:42:20 +01:00
39733a5c30
ci/buildsystem_check: ensure OPENOCD_RESET... is not exported
2020-03-03 11:42:19 +01:00
Benjamin Valentin
ffc28c4b0f
cc2538-bsl.py: fix python3 error
...
Fix the
ERROR: string argument without an encoding
error that would appear without `python3-magic` library installed.
2020-02-29 02:24:43 +01:00
Francisco
5af4c5a9c5
Merge pull request #13470 from kfessel/fix13179
...
boards/nucleo-f767zi: Fix13179 make nucleo-f767zi debuggable again
2020-02-28 17:42:10 +01:00
Karl Fessel
f00f1254ec
tools/openocd: Fix Flash probing for nucleo-f747zi
2020-02-28 13:53:20 +01:00
Karl Fessel
979b4d5cf7
Revert "boards/nucleo-f767zi: add correct flash bank openocd config"
...
This reverts commits:
- 1dec5ba61b53f60db66f
2020-02-28 13:51:58 +01:00
Benjamin Valentin
541265ee79
cc2538-bsl.py: use python3
...
support for python2 has ended and the script works just as well
with python3.
2020-02-27 14:17:37 +01:00
ef8daaf7be
suit: remove moran-v4 version of the parser
...
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
2020-02-26 14:54:16 +01:00
Martine S. Lenders
21807d40a5
start_networking.sh: add capability to not start uhcpd
...
As we now also support DHCPv6 we might want to use the setup-routine of
start_networking.sh but not start the UHCP server.
2020-02-26 12:40:03 +01:00
09538c5a75
dist: split out static tests from build_and_test.sh
2020-02-26 12:36:50 +01:00
f451eb692c
Merge pull request #13452 from aabadie/pr/tools/openocd_config_export
...
tools/openocd: only export OPENOCD_CONFIG to required targets
2020-02-25 15:11:38 +01:00
785052e410
Merge pull request #13468 from aabadie/pr/tools/bossa_rework
...
tools/bossa: split between 1.8 and 1.9 versions
2020-02-25 13:32:38 +01:00
d5e13fe4fa
dist/tools/bossa-1.9: add version 1.9.1
2020-02-25 11:49:10 +01:00
e16a9753d9
dist/tools/bossa: move to bossa-1.8 directory
2020-02-25 11:47:32 +01:00
e119bf6681
Merge pull request #13080 from aabadie/pr/make/remove_useless_exports_all
...
make: even more useless exports removed
2020-02-25 11:30:03 +01:00
fadd361a67
Merge pull request #12574 from aabadie/pr/tools/codespell_ignore_list
...
tools/codespell: improve ignored words list + enable colored output
2020-02-25 11:09:41 +01:00
dca7d96148
ci/buildsystem_sanity: ensure TARGET_ARCH no export
2020-02-25 09:42:12 +01:00
2e7202ef2e
ci/buildsystem_sanity: ensure UNDEF not exported
2020-02-25 09:40:34 +01:00
benpicco
4671fd2fe4
Merge pull request #10475 from chrysn-pull-requests/openocd-for-stk3700
...
boards/any silabs: Allow selecting OpenOCD
2020-02-24 19:12:43 +01:00
99d1404d2f
ci/buildsystem_check: ensure OPENOCD_CONFIG is not exported
2020-02-24 10:04:12 +01:00
bd081cd980
tools/openocd: remove default OPENOCD_CONFIG value
...
The default value is already set in openocd.inc.mk
2020-02-24 10:04:11 +01:00
Gunar Schorcht
b132698cd5
cpu/esp*: move parition table tool to dist/tools/esptool
...
The same tool 'gen_esp32part.py' is used for the generation of partition tables on ESP8266 as well as n ESP32. The tool is therefore added to 'dist/tools/esptool'
2020-02-21 09:09:08 +01:00
562cc9007c
tools/packer: adapt for Ubuntu 18.04
...
This change is also a complete refactoring of the generation of the vagrant image
2020-02-19 19:23:07 +01:00
Jose Alamos
eaf2fecd20
vera++: remove non-zero exit code
2020-02-18 19:53:08 +01:00
Sebastian Meiling
2aaf811d84
Merge pull request #9778 from jia200x/pr/vera++
...
style-check/vera++: add style validator and scripts
2020-02-18 10:04:38 +01:00
Jose Alamos
d0b13281d8
ci: invoke vera++ from CI
2020-02-14 14:17:17 +01:00
Jose Alamos
c455efba36
vera++: add README file
2020-02-14 14:17:17 +01:00
Jose Alamos
6057d1fba9
vera++: add check.sh script
2020-02-14 14:17:17 +01:00
Jose Alamos
6352c3cf48
style-check/vera++: add RIOT vera++ files
2020-02-14 14:17:16 +01:00
chrysn
1dbf07f926
openocd: Add instructions for overriding OPENOCD
2020-02-14 09:42:20 +01:00
chrysn
ac8ed1eb13
openocd: Allow using OpenOCD-shipped configs
...
OpenOCD already ships config files for the EFM32 and EFR32 family, no
need to duplicate them in RIOT; this removes the "file exists" check for
files that are clearly OpenOCD-shipped board configurations, as the
script can't (and shouldn't) know OpenOCD's include paths.
2020-02-14 09:24:25 +01:00
077bf8aa73
tools/toolchain_version: remove extra underlying -
2020-02-13 10:54:42 +01:00
acf3ea0636
tools/codespell: enable colored output
2020-02-12 11:22:22 +01:00
19fb4bbcb7
tools/codespell: use file for setting ignored words
2020-02-12 11:22:22 +01:00
ab9c67e621
Merge pull request #13257 from fjmolinas/pr_creating_boards_md
...
doc/doxygen: add creating boards doc
2020-02-12 08:40:53 +01:00
f1799b9910
dist/tools/codespell: add interactive mode
2020-02-11 13:23:47 +01:00
Francisco Molina
e86a5d43ed
dist/tools/buildsystem_sanity_check: exclude .md files
...
Exclude .md files from check_cpu_cpu_model_defined_in_makefile_features
2020-02-05 14:25:40 +01:00
5d5cee0fa5
ci/buildsystem_sanity: ensure not export USEMODULE_INCLUDES
2020-02-05 10:27:58 +01:00
ad234d1f38
ci/buildsystem_sanity_check: ensure USEMODULE is not exported
2020-02-05 10:27:58 +01:00
Benjamin Valentin
baea542532
tools/edbg: update to latest upstream version
...
This version has changed the target names, so add a edbg-devices.inc.mk
to automatically select the right target.
2020-01-31 09:35:27 +01:00
98995f685b
Merge pull request #13179 from fjmolinas/pr_openocd_stm32f7_probe
...
boards/nucleo-f767zi: add correct flash bank openocd config
2020-01-28 10:48:23 +01:00
Francisco Molina
53f60db66f
dist/tools/openocd/openocd.sh: add FLASH_BANK
...
Allow specifying index of `flash bank` to read configuration from
in cases where the configuration provided in openocd is incorrect.
This is the case for the majority of stm32 boards where it relies
on `flash probe` to get the correct value.
2020-01-27 22:32:00 +01:00
8509e1e213
Merge pull request #13119 from nmeum/pr/ssp_random_canary
...
sys/spp: randomize canary value on each build
2020-01-20 20:56:16 +01:00
Sören Tempel
1e52ac21e4
tools: add tool for generating random hexadecimal values
...
This tool generates a random hexadecimal value of a given maximum size.
This is useful for generating random canary values during compile-time
for the ssp module which currently uses a constant value.
2020-01-20 14:51:26 +01:00
benpicco
8a99824e66
Merge pull request #11095 from benpicco/pyterm_sleep
...
pyterm: add /sleep function
2020-01-15 18:25:29 +01:00
Leandro Lanzieri
50f1b1423a
Merge pull request #12999 from fjmolinas/pr_native_makefile_include_explicit_path
...
boards: use explicit paths for file inclusion
2020-01-13 16:00:48 +01:00
Francisco Molina
6a0eaec82f
dist/tools/buildsystem_sanity_check: check \ not in boards/
2020-01-13 12:43:36 +01:00
9de6047097
dist/tools: add support for flatc compiler
2020-01-13 09:41:22 +01:00
Francisco Molina
d2c99989dc
dist/tools/riotboot_gen_hdr/genhdr: use unsigned long
2020-01-10 12:56:07 +01:00
Gaëtan Harter
f08116f3ce
dist/tools/*: adapt to new state file targets
...
Prepare for handling pkg state with files. So it requires having the
path defined before declaring targets. In addition, it cleans up the
old git-download target.
2020-01-08 20:55:19 +01:00
ff285cb3e0
Merge pull request #13042 from fjmolinas/pr_compile_and_test_args
...
dist/tools/compile_and_test_for_board: pass parser as main arg
2020-01-08 09:01:14 +01:00
Francisco Molina
413f401b97
dist/tools/compile_and_test_for_board: pass parser as main arg
2020-01-08 08:32:42 +01:00
Juan Carrano
02b72ab385
print_toolchain_versions: print system and make's default shell.
...
Some systems use dash as system shell, others use bash. The shell used
by make can also be different, and unrelated to the system shell.
Differences in this variable can cause problems when testing PRs and
reporting bugs.
The default shell is important system information that should be reported.
2020-01-07 09:28:46 +01:00
Francisco
2729580cf1
Merge pull request #13027 from gschorcht/dist/tools/esp8266_version_check
...
dist/tools/ci: print toolchain version update for esp8266
2020-01-06 17:31:00 +01:00
Gunar Schorcht
0252af6572
dist/tools/ci: print toolchain version update for esp8266
...
The new ESP8266 port in PR #11108 requires a different tool chain than the previous implementation. The version check must be updated accordingly.
2020-01-04 17:23:28 +01:00
Francisco
f6f4469542
Merge pull request #11889 from miri64/tapsetup/enh/sudo
...
tapsetup: require to be executed with sudo
2020-01-04 10:43:06 +01:00
Martine S. Lenders
08b11d424d
tapsetup: require to be executed with sudo
2020-01-03 21:00:54 +01:00
970008a74c
ci/build_system_sanity_check: check LINKFLAGS not exported
2020-01-03 16:07:15 +01:00
ac33697af7
tools/compile_test_board: allow use of wildcards for applications
2019-12-19 15:58:47 +01:00
Dylan Laduranty
bd7f105428
Merge pull request #12978 from smlng/pr_freebsd_osprint
...
tools: correctly detect and print FreeBSD OS
2019-12-18 14:56:57 +01:00
Sebastian Meiling
c185307025
tools: correctly detect and print FreeBSD OS
...
Currently the `print_toolchain_versions` script only supports Linux
and Apple macOS when printing OS name and version. This adds support
for FreeBSD.
2019-12-18 10:25:29 +01:00
Sebastian Meiling
5eee821f6e
makefiles: move exports to vars.inc.mk
2019-12-18 10:07:50 +01:00
211cec8b3e
tools/buildsystem_check: exclude tests/external_board_native path
...
This test application must act as a regular application to showcase how to provide a board support from an external directory
2019-12-16 15:35:06 +01:00
Gaëtan Harter
41a891f284
tools: use 'BOARDSDIR' for the boards directory
...
Replace uses of 'RIOTBOARD' by 'BOARDSDIR' for tools.
2019-12-16 15:35:04 +01:00
Sebastian Meiling
80d86b42ee
tools/kconfig: replace GNU cp -t with UNIX cp
...
UNIX `cp` command does not have the `-t` option like its GNU variant.
Hence, it usage breaks building RIOT e.g. on FreeBSD.
2019-12-05 09:12:33 +01:00
benpicco
61353e04eb
Merge pull request #12860 from aabadie/pr/tools/ethos_fix_warning
...
tools/ethos: fix compilation warning in strncpy
2019-12-03 15:08:36 +01:00
Francisco
372ae95d28
Merge pull request #12628 from aabadie/pr/make/develhelp_cleanup
...
make/develhelp: make usage consistent + add ci check
2019-11-28 09:26:52 +01:00
abc99024df
tools/ethos: fix compilation warning in strncpy
2019-11-26 16:26:35 +01:00
Martine S. Lenders
ccc10432be
dist/tools/ci/print_toolchain_versions.sh: add ccache
2019-11-26 09:28:28 +01:00
Martine Lenders
95c6a785de
Merge pull request #12695 from leandrolanzieri/pr/dist/tools/add_kconfiglib
...
dist/tools: Add Kconfiglib
2019-11-25 11:51:02 +01:00
31fe89e4a2
dist/tools/uhcpd: fix typos
2019-11-23 22:39:37 +01:00
5c92411b3e
dist/tools/pic32prog: fix typos
2019-11-23 22:39:37 +01:00
801c5e3dd5
dist/tools/packer: fix typos
2019-11-23 22:39:37 +01:00
f012f88c2b
dist/tools/lazysponge: fix typos
2019-11-23 22:39:37 +01:00
f3538a2248
dist/tools/buildsystem_sanity_check: fix typos
2019-11-23 22:39:37 +01:00
09e8e1f612
dist/tools/backport_pr: fix typos
2019-11-23 22:39:37 +01:00
Francois Berder
4a31f94cfc
many typo fixes
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2019-11-23 22:39:07 +01:00
8a76acf060
Merge pull request #12706 from fjmolinas/pr_fix_flake8
...
RIOT: fix PEP8 errors
2019-11-23 06:47:34 +01:00
Francisco Molina
2e8968fa17
dist/tools/pyterm/pyterm: fix PEP8 F841, unused variable
2019-11-22 11:47:49 +01:00
Francisco Molina
d2e90b2370
dist/tools/ethos/ethos.c: remove unusued var 'escaped'
2019-11-21 11:58:07 +01:00
Francisco Molina
2202b71f99
flake8: fix PEP8 overidentation E127
2019-11-21 10:11:56 +01:00
Leandro Lanzieri
b642f2ea23
dist/tools: Add kconfiglib
...
Kconfiglib is a Kconfig implementation in Python 2/3.
See https://github.com/ulfalizer/Kconfiglib
2019-11-19 17:46:38 +01:00
588766ab27
Merge pull request #12733 from fjmolinas/pr_jlink_serial
...
makefiles/tools/jlink.inc.mk: DEBUG_ADAPTER_ID as JLINK_SERIAL
2019-11-18 13:47:26 +01:00
Francisco Molina
f9ebc8658f
dist/tools/jlink: cleanup doc
2019-11-18 13:04:42 +01:00
Kevin "Tristate Tom" Weiss
be39169bd4
Merge pull request #11108 from gschorcht/cpu/esp8266/esp-idf/pr
...
cpu/esp8266: complete reimplementation based on ESP8266 RTOS SDK
2019-11-18 09:34:49 +01:00
Gunar Schorcht
555a7040db
cpu/esp8266: reset tool to allow automatic tests
2019-11-14 13:58:48 +01:00
Gunar Schorcht
fe028455e5
cpu/esp8266: esptool.py is provided as tool
...
The modified version esptool.py from RTOS SDK that is required for flashing an image, is now placed in `dist/tools/esptool.py` and used directly from there. The advantage is that `esptool.py` hasn't to be installed explicitly anymore. Having RIOT is enough. The documentation is adapted accordingly. The oly prerequisite is that python and the pyserial module are installed.
2019-11-14 13:58:48 +01:00
Benjamin Valentin
bff06a4d64
tools: add add_insufficient_memory_board.sh script
...
This adds a script that automatically compiles all examples & tests for a given
board and updates Makefile.ci if necessary.
2019-11-12 13:52:15 +01:00
86bd4d98a5
tools/build_system_sanity_check: add check for DEVELHELP
...
This variable should be set directly as it's hanbled after in Makefile.include, and not directly via CFLAGS
2019-11-06 16:32:47 +01:00
d69254b9df
tools/buildsystem_sanity_check: add check for APPLICATION in tests
...
This check verifies the APPLICATION variable is not set by tests application Makefiles. These applications should include the common test Makefile, where this variable is automatically set
2019-11-05 07:59:57 +01:00
Marian Buschsieweke
809d74bca6
dist/tools: Added script for C11 atomics compat
...
Added a script to determine the sizes of the default C11 atomic types and
generate an C++ header with preprocessor defines to access the sizes of the
types and an integer type of the same size (and therefore alignment
requirements).
2019-10-24 23:08:35 +02:00
050c077be7
dist/tools/codespell: update ignore list
...
changed wan -> WAN, codespell help says:
"Words are case sensitive based on how they are written in the dictionary file"
Thus WAN doesn't match but "wan" does.
Also added "dout" (short form of digital out).
2019-10-24 16:47:00 +02:00
62c244608d
tools/pr_check: add REMOVEME in keyword filtered
2019-10-22 08:07:40 +02:00
Francisco Molina
fb0f64630b
dist/buildsystem_sanity_check: add check for CPU_FAM/ARCH definition
...
- Check that CPU_FAM/ARCH is only exported in vars.inc.mk
2019-10-18 08:55:33 +02:00
Marian Buschsieweke
b6d23b56ae
dist/tools: Check BOARD_INSUFFICIENT_MEMORY usage
...
- Enforce that all applications do not manage BOARD_INSUFFICIENT_MEMORY in the
Makefile
- Match also "BOARD_INSUFFICIENT_MEMORY +=", not only
"BOARD_INSUFFICIENT_MEMORY :=" or "BOARD_INSUFFICIENT_MEMORY =".
2019-10-17 15:30:21 +02:00
benpicco
c9b76a9585
Merge pull request #12406 from maribu/pain_in_the_ass
...
examples: Moved CI infos to Makefile.ci
2019-10-15 14:40:40 +02:00
benpicco
10824e1cd0
Merge pull request #12251 from maz3max/bmp-tool
...
Add helper script for Black Magic Probe
2019-10-15 13:39:08 +02:00
Maximilian Deubel
30f12c9058
Add helper script for Black Magic Probe
...
This script can detect [Black Magic Probes](https://github.com/blacksphere/blackmagic/wiki ) and act as a flashloader (and more).
It is compatible with Linux and macOS.
All important options that can be set via the monitor command are available as arguments.
Makefiles for using `make flash`, `make erase`, `make debug` and `make term` with the script are included.
2019-10-15 12:58:24 +02:00
Marian Buschsieweke
2c996057c4
dist/tools: Check BOARD_INSUFFICIENT_MEMORY usage
...
Enforce BOARD_INSUFFICIENT_MEMORY is not managed in the Makefile in the examples
2019-10-15 09:55:07 +02:00
3e3768140c
tools/ci: fix typo in build_and_test.sh script
2019-10-10 15:48:18 +02:00
5d408d68c4
ci: add codespell check to track typos
2019-10-10 15:48:18 +02:00
Francisco
315e455643
Merge pull request #12413 from cladmi/pr/compile_and_test_for_board/flash_targets
...
tools/compile_and_test_for_board: allow setting the flash targets
2019-10-10 12:46:41 +02:00
Gaëtan Harter
7f2f0b6616
tools/compile_and_test_for_board: allow setting the flash targets
...
This allow configuring the flash targets in the same way as the
compilation and test targets.
This is part of trying to flash with docker using a different flash target.
2019-10-10 11:39:00 +02:00
5ab8d92702
Merge pull request #11818 from kaspar030/suit-pr
...
sys/suit: initial support for SUIT firmware updates
2019-10-10 10:38:01 +02:00
Gaëtan Harter
7ac30e471c
boards/slwstk6000b-*: move CPU_MODEL definition to Makefile.features
...
This is still currently a hack to hardcode it as the value can be deduced
from the `BOARD_MODULE` daughter board name.
But it requires more cleanup and could come in a separate step.
Part of moving CPU/CPU_MODEL definition to Makefile.features to have it
available before Makefile.include.
2019-10-09 18:51:57 +02:00
b899a9f362
examples/suit_update: add SUIT draft v4 example & test
...
This commit adds an example application showcasing SUIT draft v4
firmware updates.
It includes a test script suitable for local or CI testing.
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
Co-authored-by: Koen Zandberg <koen@bergzand.net>
Co-authored-by: Francisco Molina <femolina@uc.cl>
2019-10-09 13:51:29 +02:00
Francisco
1c5c027ee7
Merge pull request #12004 from cladmi/pr/make/dependencies/debug_targets
...
make: add targets to debug dependencies variables
2019-10-08 17:41:34 +02:00
Gaëtan Harter
ddf3874995
boards/slwstk6000b: migrate to use a common/slwstk6000b
...
Migrate the board to be implemented with a common/slwstk6000b.
It is a pre step for splitting the board for each "BOARD_MODULE".
2019-10-08 15:36:09 +02:00
Gaëtan Harter
7d0b922e98
buildsystem_sanity_check: script to save deps resolution variables
...
Add a script saving all applications and boards dependency resolution
variables and also aggregated files to compare between both dependencies
handling.
It is slow but should dump everything.
2019-10-07 14:47:34 +02:00
db96f31a54
tools/flake8: exclude suit_manifest_encoder_04 script
...
This script is copied as is from an external repository:
https://github.com/ARMmbed/suit-manifest-generator/blob/ex-gen-moran-suit-manifest-04/example-generator-moran-suit-manifest-04/make-examples.py
2019-10-04 15:45:22 +02:00
7f6862c2d3
suit: add SUIT draft v4 manifest tools
...
This commit adds support tools used by the SUIT firmware upgrade module.
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
Co-authored-by: Koen Zandberg <koen@bergzand.net>
Co-authored-by: Francisco Molina <femolina@uc.cl>
2019-10-04 15:45:22 +02:00
0935a5ff20
dist/tools: use external setsid tool for OSX
2019-10-03 12:43:41 +02:00
benpicco
29de470281
Merge pull request #12337 from cladmi/pr/make/cpu/makefile_features/static_test
...
dist/buildsystem_sanity_check: add check for CPU/CPU_MODEL migration
2019-10-01 20:00:32 +02:00
Gaëtan Harter
cbfab679d3
dist/buildsystem_sanity_check: add check for CPU/CPU_MODEL definition
...
CPU and CPU_MODEL variables must now be defined by
`boards/**/Makefile.features` or 'cpu/CPU/Makefile.features' files
instead of `**/Makefile.include.
Currently blacklist the slwstk6000b that still define
'CPU_MODEL' in a file that is not a 'Makefile.features.
This allows getting this sanity check script in master
This allow using the variables when parsing dependencies.
2019-10-01 16:02:03 +02:00
Gaëtan Harter
7064f7e0ab
dist/buildsystem_sanity_check: add check for included CPU Makefiles
...
CPU Makefile.include/Makefile.features/Makefile.dep must not be
included by the board directly anymore.
2019-10-01 15:57:42 +02:00
Gaëtan Harter
a514c9bc12
jlink.sh: use PYTERMFLAGS
...
Use PYTERMFLAGS for configuring the terminal.
2019-10-01 14:13:02 +02:00
6acb523d35
list-ttys: Add punctuation between name and serial
2019-09-30 18:28:32 +02:00
68aae9c848
Merge pull request #12262 from cladmi/pr/cflags/fix_spaces_and_rebuild
...
makefiles: do not remove defines from CFLAGS
2019-09-28 09:42:56 +02:00
cladmi
e42b4cc75f
dist/tools/cmake: handle strings with \"
...
CMake quoted strings do not accept having \ or " inside. So use the
"bracket argument" format.
I migrated all variables to use this format.
Migrate to 'printf' to not rely on having \" inside the string everywhere.
This prepares for having macros defined in the CFLAGS again.
2019-09-27 19:28:32 +02:00
Benjamin Valentin
6a08a78d77
dist/tools/pyterm: drop loglevel from putput
...
The loglevel on pyterm is always INFO.
Drop it to remove clutter from the output.
2019-09-27 15:16:06 +02:00
Gaëtan Harter
d852ca2b21
pic32prog: add pic32prog programming tool
...
pic32prog is a program for flashing pic32 boards from command line on Linux.
It works with:
* Microchip PICkit2
* Microchip PICkit3 with script firmware.
* Other ones: https://github.com/sergev/pic32prog/wiki
2019-09-24 17:43:12 +02:00
2e9f443a5b
tools/buildsystem_check: add deprecated pattern for board ci whitelist
2019-09-16 19:02:54 +02:00
0ae86d7775
Merge pull request #12242 from smlng/tools_shebang
...
tools: fix shebang in scripts
2019-09-16 17:23:50 +02:00
Sebastian Meiling
9e870460fd
tools: fix shebang in packer/setup.sh
...
Change shebang in script from `/bin/bash` to `/usr/bin/env bash`,
which fixed problems when `bash` is not available in standard location,
e.g., on non-Linux OSes such as FreeBSD.
2019-09-16 11:27:36 +02:00
Sebastian Meiling
364c831bf3
tools: fix shebang in openocd.sh
...
Change shebang in script from `/bin/bash` to `/usr/bin/env bash`,
which fixed problems when `bash` is not available in standard location,
e.g., on non-Linux OSes such as FreeBSD.
2019-09-16 11:27:33 +02:00
Sebastian Meiling
277fbd8386
tools: fix shebang in has_minimal_version.sh
...
Change shebang in script from `/bin/bash` to `/usr/bin/env bash`,
which fixed problems when `bash` is not available in standard location,
e.g., on non-Linux OSes such as FreeBSD.
2019-09-16 11:27:15 +02:00
Sebastian Meiling
079b2246bd
tools: fix shebang for static-test.sh
...
Change shebang in static-test.sh from `/bin/bash` to `/usr/bin/env bash`
This fixes problems when `bash` is not available in standard location,
but e.g. in `/usr/local/bin/` as on FreeBSD.
2019-09-16 10:23:11 +02:00
Gaëtan Harter
23d743926c
dist/tools/buildsystem_sanity_check: check no PORT exports
...
Add sanity check for removed exports.
2019-09-12 14:44:00 +02:00
Francisco
2d890db6af
Merge pull request #10440 from jcarrano/no-export-ports
...
makefiles: remove exports so that PORT is not evaluated if it's not needed.
2019-09-12 13:50:24 +02:00
Francisco Molina
f718cc581a
dist/tools/pyocd: add PYOCD_ADAPTER_INIT
...
- Pass parameters before flash, debug, reset
2019-09-12 08:13:28 +02:00
abd1cd51b7
Merge pull request #12120 from cladmi/pr/pyterm/configurable_repeat_command_on_empty_line
...
pyterm: configuring repeating command on empty line
2019-09-10 09:41:05 +02:00
9ea3b2e04f
dist/tools/pyterm: fix handling of reset ANSI escape code
2019-09-09 20:27:16 +02:00
9065f8358c
tools/openocd: correctly check reset_config variable value
...
This avoids the following warning message when running OpenOCD: 'openocd.sh: line 124: [: : integer expression expected'
2019-09-03 12:44:09 +02:00
Francisco Molina
900875c603
dist/tools/openocd: add OPENOCD_EXTRA_INIT_RESET
...
- Add a variable to add extra openocd commands before resetting
a board. These will not be called when `debug`, in contrast
to OPENOCD_CONFIG, OPENOCD_EXTRA_INIT and OPENOCD_ADAPTER_INIT.
- Add connect_assert_srst to reset config if
OPENOCD_RESET_USE_CONNECT_ASSERT_SRST=1
2019-09-02 14:53:51 +02:00
Gaëtan Harter
0fc38c58e8
pyterm: configuring repeating command on empty line
...
Allow configuring that it sends an empty newline when it receives a newline.
2019-08-29 15:15:57 +02:00
Sebastian Meiling
8e08748c60
Merge pull request #7654 from cladmi/pr/arduino_sketches.cpp
...
arduino/sketches: build sketches as a module
2019-08-21 15:22:45 +02:00
Gaëtan Harter
be30f072e2
sys/arduino/sketches: build sketches as a module
...
Generate a module for arduino sketches in a subfolder of BINDIR.
This prevents issues when doing concurrent builds or out of tree build with
readonly sources.
Declare all generated files as `BUILDDEPS` to be re-created after
`clean` on parrallel `clean all`.
2019-08-21 11:57:41 +02:00
Gaëtan Harter
74fbf41517
dist/tools/build_system_sanity_check: check BOARD set as ?=
...
Applications Makefile must not set 'BOARD =' unconditionally but
'BOARD ?='
2019-08-14 17:23:18 +02:00
Sebastian Meiling
950b83e63e
Merge pull request #10252 from jcarrano/flake8-report-existence
...
tools/ci: correcly report flake8 version.
2019-08-14 11:11:50 +02:00
Martine Lenders
2f8234acb1
Merge pull request #11813 from aabadie/pr/tools/doccheck_detect_duplicate_defgroup
...
tools/doccheck: extend script to also check for Doxygen groups defined multiple times
2019-08-08 19:57:27 +02:00
Kees Bakker
c1d3128be3
dist/tools: add Coccinelle check for ARRAYSIZE
...
This Coccinelle script will warn when new code has the potential to use
the macro ARRAYSIZE instead of something like this
sizeof(some_array) / sizeof(some_array[0])
2019-08-07 21:55:41 +02:00
5837075150
tools/doccheck: optimize display of undefined groups
...
The printed variable is not computed if no undefined group is found
2019-08-07 10:33:03 +02:00
1876619bf9
tools/doccheck: add check for multiple group definition
2019-08-07 10:33:03 +02:00
Gaëtan Harter
25890c814a
compile_and_test_for_board: add --with-test-only
...
Add an option to only compile applications that have available test.
The target usage is when running hardware tests to save time by only
compiling what will be tested.
2019-08-02 14:35:05 +02:00
Gaëtan Harter
821c42f5b2
compile_and_test_for_board: add logger info for 'has_test'
...
Add a logger info printing if the application has a test.
2019-08-02 13:24:52 +02:00
Gaëtan Harter
5ed65989ed
dist/jlink.sh: Allow overwriting the 'reset' commands
...
Add a variable to configure the reset commands.
This is required for board that need a hardware reset.
2019-07-17 15:29:51 +02:00
21e796d6f9
Merge pull request #11841 from kaspar030/bump_git_cache
...
dist/tools/git/git-cache: bump version
2019-07-17 13:21:59 +02:00
b33a196e78
dist/tools/git/git-cache: bump version
...
Upstream contains important fixes:
- improve tag handling
- improve concurrent use
- clean up temporary tags
2019-07-17 12:04:37 +02:00
f74e5e754a
dist/tools/ethos: add setup_network.sh script
2019-07-15 12:33:11 +02:00
Juan I Carrano
6349d91277
Merge pull request #11695 from cladmi/pr/buildsystem_sanity_check/bug/never_returns_error
...
dist/tools/build_system_sanity_check: BUG fix errors being ignored
2019-06-26 11:58:11 +02:00
f1ffa10c7e
dist/tools/ethos: adapt README.md to USEMODULE+=stdio_ethos
2019-06-24 09:56:30 +02:00
a66c7cf6e7
tools/nrf52_resetpin_cfg: add stdin dependency
2019-06-20 16:01:45 +02:00
Gaëtan Harter
e4b82be564
dist/tools/build_system_sanity_check: BUG error_on_input always fail
...
The function was always failing but was hidden by the previous bug too.
2019-06-14 12:24:31 +02:00
Gaëtan Harter
7d65a715ca
dist/tools/build_system_sanity_check: deprecate FEATURES_MCU_GROUP
...
Add a function to list deprecated variables or patterns and use it for
* FEATURES_MCU_GROUP
2019-06-14 11:34:00 +02:00
Gaëtan Harter
b744ba7f9e
dist/tools/build_system_sanity_check: BUG fix errors being ignored
...
On error messages the exit code was still 0 due to the typo.
Having error messages again properly return with an exit code of 1.
2019-06-14 10:58:28 +02:00
be1551c180
Revert "REMOVE ME TEST COMMIT"
...
This reverts commit c7b16bb4b4
2019-06-14 10:04:33 +02:00
Gaëtan Harter
c7b16bb4b4
REMOVE ME TEST COMMIT
2019-06-13 16:04:04 +02:00
Gaëtan Harter
f37a586183
dist/tools/build_system_sanity_check: add reasons for each error type
...
Prepend the reason for the matched error pattern.
It will only add the reason if there is an error.
2019-06-13 16:04:04 +02:00
Gaëtan Harter
534ccaf5ee
dist/tools/build_system_sanity_check: handle error by prepending
...
Handle putting the final error message by prepending the output.
This removes issue with errors being concatenated and gives an
interractive output.
The errors are now send to stderr.
2019-06-13 16:03:51 +02:00
Gaëtan Harter
ef24df7ac0
dist/tools/build_system_sanity_check: add script helper functions
...
Add helper functions to better handle output and errors.
2019-06-13 16:01:45 +02:00
Leandro Lanzieri
4f3bc12daa
dist/tools/edbg: Escape variable values
2019-06-06 14:45:35 +02:00
Juan Carrano
7f1357b721
tools/usb-serial: do not advise people to export PORT.
...
The example in the tool documentation contains several things that are
wrong:
- exports PORT.
- Defines the port using :=.
- Defines PORT instead of PORT_LINUX, PORT_DARWIN
- ifeq-based logic (which will force an evaluation).
I have not tested the new example script.
2019-06-03 16:31:31 +02:00
Gaëtan Harter
6c529458f1
dist/tools/buildsystem_sanity_check/: check no PORT_ exports
...
Add sanity check for removed exports.
2019-06-03 16:24:48 +02:00
06013cf443
tools/buildsystem_sanity_check: blacklist PROGRAMMER_SERIAL variable
2019-06-03 10:32:09 +02:00
4b4b5106c9
tools/buildsystem_sanity_check: blacklist new variables
...
DEBUG_ADAPTER, DEBUG_ADAPTER_ID, STLINK_VERSION are now blacklisted from exported variables
2019-06-03 10:32:08 +02:00
Leandro Lanzieri
79c095ef46
tools/jlink: Exit terminal on Ctrl+C
2019-05-29 09:18:52 +02:00
Leandro Lanzieri
07131b4e4d
tools/jlink: Wait for server before pyterm
2019-05-29 09:16:05 +02:00
Gaëtan Harter
d486598fdf
dist/tools/buildsystem_sanity_check: check no PREFLASH* exports
...
Add sanity check for removed exports.
2019-05-28 09:58:40 +02:00
Gaëtan Harter
ea51cf3174
dist/tools/buildsystem_sanity_check: check no DEBUG* exports
...
Add sanity check for removed exports.
2019-05-28 09:58:40 +02:00
Gaëtan Harter
734410b9cd
dist/tools/buildsystem_sanity_check: check no RESET/RESET_FLAGS exports
...
Add sanity check for removed exports.
2019-05-28 09:56:14 +02:00
Gaëtan Harter
95c07c507c
dist/tools/buildsystem_sanity_check: check no FLASHER/FFLAGS exports
...
Add sanity check for removed exports.
2019-05-28 09:56:14 +02:00
Gaëtan Harter
04e76f323d
dist/tools/buildsystem_sanity_check: handle vars exported in vars.inc.mk
...
Handle differently variables that are exported in `vars.inc.mk` from the
ones that should not.
This is needed for the upcoming variables change that should also be
removed from `vars.inc.mk` right now.
Keeping the old behavior will help migrating other variables more easily
by keeping them only exported in vars.inc.mk in the first time.
2019-05-28 09:53:40 +02:00
Martine Lenders
0f3ccb2a33
Merge pull request #11227 from maribu/leonardo
...
boards: Add support for the Arduino-Leonardo
2019-05-24 18:24:21 +02:00
3d6434125e
dist/tools/ci: update print version script in build_and_test.sh
2019-05-24 17:14:06 +02:00
Thomas Perrot
b63121c588
board: add support for arduino-leonardo
2019-05-24 15:12:47 +02:00
Francisco
00c652c8b0
Merge pull request #11223 from cladmi/pr/openocd/flashbin/probe
...
tools/openocd.sh: try to probe the board for real flash address
2019-05-17 10:28:58 -07:00
Gaëtan Harter
468e4084f2
tools/openocd.sh: probe the board for real flash address on binary flash
...
Some boards have a configuration of the flash bank with an address of 0
when it actually starts as 0x08000000 but openocd relies on probing
the hardware at runtime.
This now allows to first probe the board to get the actual value.
If probing fail for any reason, return the value from the configuration.
This can happen when the board is unreachable so at least give a valid
output instead of an error.
This will allow correct flash detection on for example the `stm32f3` and
`stm32l4` which have a configured address of 0.
4a6f93c961/tcl/target/stm32f3x.cfg (L64)4a6f93c961/tcl/target/stm32l4x.cfg (L51)
2019-05-17 18:28:27 +02:00
9363a515a5
tools/pr_check: make sure no pkg makefile defines PKG_SOURCE_LOCAL
...
The variable is supposed to be used for local development only.
2019-05-16 11:31:32 +02:00
Gaëtan Harter
5bb49b673c
Merge pull request #11517 from cladmi/pr/compile_and_test_for_board/do_not_check_git
...
tools/compile_and_test_for_board: ignore git tracked or not
2019-05-13 19:43:02 +02:00
Gaëtan Harter
89e5c67f28
tools/compile_and_test_for_board: ignore git tracked or not
...
Remove the check that directory are git tracked or not.
This should not be done by the script and was a mistake.
If need be to be checked it should be moved to RIOT 'info-applications'
and running tests should be done in a clean environment anyway.
2019-05-13 16:38:41 +02:00
Gaëtan Harter
16f07e571e
tools/compile_and_test_for_board: assert resultdir is valid
...
Currently giving an absolute or outside of RIOT application breaks the
result directory evaluation which can lead to deleting the application.
Add an assertion to detect it.
2019-05-13 15:47:44 +02:00
Gaëtan Harter
db3847f107
tools/compile_and_test_for_board: add is_in_directory function
...
Add function testing if a path is inside a directory.
2019-05-13 15:38:27 +02:00
Gaëtan Harter
42b3cd5903
dist/tools/buildsystem_sanity_check: add an export variable check
...
Check that some variables are not exported in the build system.
This should track variables that managed to not be exported anymore so
that they do not reappear in a BSP.
It is not a whitelist but just a way to keep things cleaned in the
future.
2019-05-06 13:36:46 +02:00
Martine Lenders
bb7936cf21
release-stats: simplify script usage
2019-04-30 16:06:59 +02:00
Martine Lenders
11da5e8e67
Merge pull request #11435 from miri64/dist/fix/backport-tracking
...
backport_pr: set tracking branch to remotely created branch
2019-04-24 16:37:08 +02:00
Martine Lenders
aef6110b40
backport_pr: set tracking branch to remotely created branch
2019-04-24 15:53:54 +02:00
Martine Lenders
22640396a5
backport_pr: get Head object from new_branch name after creation
2019-04-24 15:52:55 +02:00
Martine Lenders
e3a99c40f6
backport_pr: exclude 'Reviewed' labels from backport
2019-04-24 11:52:54 +02:00
Martine Lenders
292c5dd730
backport_pr: add doc tests for _get_labels()
2019-04-24 11:47:22 +02:00
Gaëtan Harter
a0ef287f82
Merge pull request #11409 from miri64/dist/enh/backport_pr_fixes
...
dist/tools/backport_pr: several improvements
2019-04-18 14:55:03 +02:00
Semjon Kerner
f72cb846da
dist/tools/nrf52_resetpin: delete obsolete register
2019-04-17 15:32:48 +02:00
Martine Lenders
1930368fd5
backport_pr: exit early when backport branch already exists
2019-04-17 12:44:21 +02:00
Martine Lenders
a7459e7463
backport_pr: don't assume devel remote to be 'origin'
2019-04-17 12:42:02 +02:00
Martine Lenders
989e2c6303
backport_pr: add function to find remote by URL
2019-04-17 12:35:14 +02:00
Martine Lenders
a9767889fc
backport_pr: make error branch handling more idempotent
...
Otherwise, when an error occurs (e.g. credentials wrong on git push)
the worktree and the release branch still exists, which might be hard to
remove for a newcomer not knowing about `git worktree`.
2019-04-17 12:11:53 +02:00
Benjamin Valentin
e12f1f2ff8
pyterm: add /sleep function
...
The init_cmd feature is quite handy for automated pyterm runs but there
is no delay between the commands that are executed.
This adds a /sleep function that can be added between init_cmd commands
to prevent them from overflowing the RX buffer on the target.
2019-04-11 00:09:58 +02:00
Sebastian Meiling
70c30947d0
tools/tunslip: correct typos and refine readme
2019-04-09 17:31:08 +02:00
Martine Lenders
b381c0b24d
Merge pull request #11303 from cladmi/pr/jlink/failonerror
...
jlink.sh: Exit with an error on failure for JLinkExe commands
2019-03-28 14:48:51 +01:00
Gaëtan Harter
a354b10964
jlink.sh: Exit with an error on failure for JLinkExe commands
...
On error Jlink exits with a no error code by default.
From the JLink User Guide:
'-ExitOnError' has the same meaning as the 'exitonerror' command
'exitonerror' command
This command toggles whether J-Link Commander exits on error or not.
1: J-Link Commander will now exit on Error.
0: J-Link Commander will no longer exit on Error.
Executing 'flash/reset' without a board connected now correctly returns an
error. For 'term' it does not show an error due to the way it is handled
internally.
It also returns an error when the board fails to do an operation when it
is in a state where it cannot be flashed for example.
2019-03-28 11:26:24 +01:00
Gaëtan Harter
87a1d08602
compile_and_test_for_board: use 'test/available' to detect test
...
Use the new 'test/available' target to detect if there are tests.
This prevents issues where calling make would print unrelated debug
messages that would be taken as an output.
The targets executed to check if there are tests can be set with
'--test-available-targets'.
2019-03-26 14:12:25 +01:00
e2a162b79d
tools/pyocd: add option for image offset
2019-03-24 16:48:45 +01:00
danpetry
80d4838b1a
jlink: handle flashing at IMAGE_OFFSET
...
- Handling of flashing address is now similar to that in openocd,
except FLASH_ADDR is not automatically determined
2019-03-20 16:07:51 +01:00
Dylan Laduranty
c99c0f61ab
Merge pull request #11156 from jcarrano/update-edbg
...
tools/edbg: Update to latest version.
2019-03-19 21:36:28 +01:00
Juan I Carrano
b50ad9ed4c
Merge pull request #11040 from kaspar030/fix_hifive1_reset
...
boards/hifive1: fix hifive1 reset
2019-03-12 14:59:36 +01:00
3583b00750
dist/tools/openocd: make "reset run" command configurable
...
Co-Authored-By: jcarrano <juan@carrano.com.ar>
2019-03-12 11:49:02 +01:00
Juan Carrano
872f850e87
tools/edbg: Update to latest version.
...
The lastest version of edbg solves a double-reset issue that was
hindering testing (see #11125 and https://github.com/ataradov/edbg/issues/77 )
It also adds support for SAMR34 and SAMR35, needed by @dylad for MCU
port.
2019-03-11 15:51:32 +01:00
Gaëtan Harter
a1d47cae21
tests/compile_and_test_for_board: remove duplicate 'default' in help
...
Default values are given by ArgumentDefaultsHelpFormatter so no need to
duplicate 'default' value in manually anymore.
2019-03-06 14:47:45 +01:00
Gaëtan Harter
8c15d97629
tools/compile_and_test_for_board: add tests for help message
...
Verify that the help message matches what is in the docstring.
2019-02-28 13:45:40 +01:00
Gaëtan Harter
998211d738
tools/compile_and_test_for_board: add tests directory
...
Tests in `tests` will be used by 'tox'.
2019-02-28 13:45:40 +01:00
Gaëtan Harter
94aeb5a223
tools/compile_and_test_for_board: FIX outdated help docstring
...
Update the help message in the docstring.
It should reflect the content of `--help`.
I replaced the manual line wrapping by disabling the warning on the
docstring.
2019-02-28 13:45:40 +01:00
Gaëtan Harter
9af491d2f6
tools/backport_pr: add tox.ini
...
Adapt tox file from `compile_and_test_for_board.py`.
`tox` is still not working without errors but gives way to start
refactoring.
2019-02-12 15:34:15 +01:00
493cac27f3
dist/tools: Add script for backporting PR's
...
This script provides functionality to easily backport a merged pull request to
a release branch.
It relies of having a `github` API token stored in `~/.riotgithubtoken` by
default.
The script works by fetching information from the supplied **merged** pull
request. It then looks for the last release branch.
A temporary git `worktree` with a new branch is created based on this release
branch. All commits from the pull request are then cherry-picked into this
branch which is then pushed to `origin`.
It then creates a new pull request on `github` with a reference to the original
pull request. It optionally puts a comment under the original pull request to
the new backport pull request.
Co-authored-by: Gaëtan Harter <gaetan.harter@fu-berlin.de>
2019-02-12 15:34:12 +01:00
Gaëtan Harter
f89bf055b4
pyterm: use python3 by default
...
Python3 has been the default in our scripts for some time now, but pyterm still
requested python which uses python2 on ubuntu stable.
This pushes toward only needing to install `python3` python
dependencies.
2019-02-11 17:09:13 +01:00
613e05fd42
tools/compile_test_one_board: update documentation README
...
Provide some notes on how to perform basic checks on the script using tox
2019-01-23 18:23:05 +01:00
148f715689
tools/compile_test_one_board: add tox.ini configuration file
...
tox.ini configures 3 checks on the python script: doctest (via pytest), pylint and flake8
2019-01-23 18:23:04 +01:00
26a64694dd
tools/compile_test_one_board: rename TestError exception class
...
Otherwise it conflicts with pytest automatic parsing which tries to execute all classes with name beginning with Test
2019-01-23 16:25:31 +01:00
Gaëtan Harter
204a4bae7f
dist/tools/compile_and_test_for_board: add some TODO
...
The script was migrated as is from Release-Specs but could benefit from
adaptation as it is run from RIOT.
2019-01-18 16:08:55 +01:00
Gaëtan Harter
ae76d7f364
dist/tools/compile_and_test_for_board: add compile and test script
...
Move the compile and test script from Release-Specs.
https://github.com/RIOT-OS/Release-Specs/blob/271dc8/02-tests/compile_and_test_for_board.py
By default it should be run as
./compile_and_test_for_board.py path_to_riot_directory board_name [results]
The script is migrated as-is so has not been changed to automatically use the
current repository.
2019-01-18 16:08:31 +01:00
Juan Carrano
2209435214
tools/ci: correcly report flake8 version.
...
If the flake8 executable is not found, the static test script reports
the tool as missing. It may happen that the flake8 module is installed,
but the console entry point is not.
In the flake8 shell script, flake is invoked via `python -m`. The result
is a confusing error message where static-test reports the tools as missing,
yet the flake8 tests are run.
This patch makes the toolchain version script use the same command as the
flake8 script.
2019-01-15 20:10:29 +01:00
Juan Carrano
9926ac1ffa
ci/print_toolchain_versions: robust/portable version detection.
...
Detect command line tool versions without using "command".
Command may be a builting in some shells, leading to unportability.
The new version uses the status code to correctly detect a non-existent
command. This allows it to differentiate between error in the tool and
not-found errors.
It also works with compound commands, for example `python -m callable_module".
2019-01-15 20:02:01 +01:00
Martine Lenders
4887b22ef5
print_toolchain_versions.sh: add xtensa newlibs
2018-12-29 15:26:36 +01:00
Martine Lenders
745574266c
print_toolchain_versions.sh: add xtensa toolchains
2018-12-29 14:28:08 +01:00
Martine Lenders
7bdbd163c9
print_toolchain_versions.sh: make lists easily diff-able
2018-12-29 14:27:35 +01:00
f5170bb82c
dist/tools/pyocd: provide support for PyOCD programmer
2018-12-21 14:56:26 +01:00
Francisco Acosta
a638f31bce
dist/tools: add genhdr tool to generate RIOT image headers
...
In order to use the RIOT bootloader (riotboot) a header needs to
be created and placed before the firmware. This tool generates
such a header with the expected information by the bootloader.
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
2018-12-18 19:31:34 +01:00
Dylan Laduranty
f01bc4dc1d
dist/tools/edbg: update to lastest version
...
Signed-off-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
2018-12-07 10:49:38 +01:00
Gaëtan Harter
a0b97ad737
openocd: get flash and debug files from cli
...
Get FLASH_FILE and ELFFILE from command line instead of environment variable.
The documentation was claiming ELFFILE was given as a command line argument
already, but is was not.
2018-12-05 16:21:03 +01:00
963d06c7de
Merge pull request #10528 from cladmi/pr/make/jlink/flashfile_from_cli
...
jlink: get flash and debug files from cli
2018-12-03 13:44:39 +01:00
Juan I Carrano
f4e810cfff
Merge pull request #9819 from jcarrano/doccheck-report-total-failure
...
tools/doccheck: Detect when `make doc` fails to run.
2018-11-29 18:37:15 +01:00
98413e43af
tools/pyterm: catch serial.Exception when port is busy
...
This can happen when opening a terminal right after flashing a board that has just been plugged
2018-11-27 17:30:45 +01:00
cladmi
5fcc1210d9
jlink: get flash and debug files from cli
...
Get BINFILE and ELFFILE from command line instead of environment variable.
Rename 'HEXFILE' to 'BINFILE' in the script as the binary file is used.
The documentation was already talking about 'BINFILE' but 'BINFILE'
was never exported by the build system and it was using 'HEXFILE' in the
implementation.
2018-11-27 15:28:49 +01:00
Juan Carrano
ae4cecd14c
tools/doccheck: Detect when make doc fails to run.
...
The previous doccheck would give a false negative when doxygen does
not even run (for example, because of misconfiguration).
Also, when doxygen fails to run, print the full output.
2018-11-22 16:51:07 +01:00
cladmi
bcf0342cbd
static-test: add buildsystem sanity check
2018-11-19 16:00:46 +01:00
cladmi
143e393fcd
dist/tools: add build system sanity check script
...
Add a script to execute sanity checks on build system files.
It should prevent bad patterns to re-appear after being cleaned.
Currently adds a check for using the content of `FEATURES` instead of
`USEMODULE`.
Modules should not check the content of FEATURES_PROVIDED/_REQUIRED/OPTIONAL
Handling specific behaviors/dependencies should by checking the content of:
* `USEMODULE`
* maybe `FEATURES_USED` if it is not a module (== not a periph_)
2018-11-16 16:40:23 +01:00
Joakim Nohlgård
3deea7dfbf
print_toolchain_versions.sh: Add make command version
2018-11-12 14:06:29 +01:00
cladmi
a7779e24c5
openocd.sh: handle 'newline' on osx
...
https://stackoverflow.com/a/24276470
In replacement strings used with the s command, assume that NO
control-character escape sequences are supported (ex '\n')
Replace with an escaped newline character. Current form works in 'bash'.
2018-10-30 19:44:37 +01:00
cladmi
6f02568c84
openocd.sh: split 'sed' commands on different lines
...
https://stackoverflow.com/a/24276470
Labels and branching commands (e.g., b) must be followed by an actual
newline or continuation via a separate -e option.
2018-10-30 19:44:37 +01:00
cladmi
291a80c664
openocd.sh: refactor splitting banks in a separate function
...
Prepare for other refactoring.
2018-10-30 19:44:37 +01:00
Kevin "Bear Puncher" Weiss
7187bbf8cf
Merge pull request #9426 from gschorcht/esp32
...
ESP32 port
2018-10-16 15:24:25 +02:00
Martine Lenders
a73c499b67
Merge pull request #10117 from miri64/tools/enh/pr-check-label-rename
...
tools/pr_check: adapt for label categorization
2018-10-12 20:17:57 +02:00
Kevin "Bear Puncher" Weiss
0719442ddc
Merge pull request #10072 from haukepetersen/fix_nrf52xxxdk_resetpin
...
boards/nrf52xxxdk: make reset pin work
2018-10-12 09:36:30 +02:00
Martine Lenders
6f8fd1d6df
doccheck: exclude dist/tools directory from group check
2018-10-11 15:16:09 +02:00
Pekka Nikander
371134264a
dist/tools/commit-msg/check.sh: Enhance reporting
2018-10-10 14:06:33 +03:00
Schorcht
32e602680b
cpu: add esp32 vendor files
2018-10-08 12:20:49 +02:00
Martine Lenders
055ec38fff
tools/pr_check: adapt for label categorization
...
In [#10030 ][1] it was decided to rename all labels to reflect their
respective category. The labels "NEEDS SQUASHING" and "Waiting For Other
PR" are used in the `dist/tools/pr_check/pr_check.sh` script however, so
that script needs to be adapted.
[1]: https://github.com/RIOT-OS/RIOT/issues/10030
2018-10-05 19:07:32 +02:00
Francisco Acosta
cb8e78da13
Merge pull request #9916 from kYc0o/pr/tools/fix_kill_testrunner
...
dist/tools/jlink.sh: fix testrunner on stdio_rtt based devices
2018-10-04 17:31:58 +02:00
Hauke Petersen
0ca02de0a2
tools: add nrf52_resetpin_cfg tool
...
This new tool allows configuring the reset pin for nRF52-based
boards. As the reset pin configuration is persistent, it does not
make sense to include it into the board code...
2018-09-28 16:50:58 +02:00
Martine Lenders
5ac02f5134
Merge pull request #10010 from smlng/pr/fix/cppcheck-suppress
...
dist/cppcheck: fix missing cppcheck-suppression reasons
2018-09-25 13:52:28 +02:00
smlng
d7942cd974
dist/tools: fix tunslip6 strncat num param
...
Cppcheck was (correctly) warning here that concat to strings might
result in buffer overflow because the terminating `\0` was not considered.
This is fixed here, making the cppcheck suppression also obsolete.
2018-09-25 12:03:58 +02:00
smlng
3f811c44db
cppcheck: extend cppcheck README example
...
Extend the cppcheck suppression example to show that each suppression
should have a reason describing the intentional suppression of a
cppcheck warning or error.
2018-09-25 12:03:58 +02:00
smlng
59e299635b
cppcheck: add/correct reason for cppcheck-suppress
...
Adding and correcting description/rational on why certain cppcheck
warnings or errors are intentionally suppressed.
2018-09-25 12:03:58 +02:00
smlng
6d24033bd6
dist/tools: print OS and Kernel version
...
Add output to print_toolchain_version script to include info
on the operating system and its kernel version.
2018-09-25 09:22:42 +02:00
smlng
87505f0334
dist/tools: fix whitespace in print_toolchain_versions
2018-09-25 09:22:41 +02:00
smlng
c73ed667c1
dist/tools: print more tool versions
...
This adds openocd, python, python2, and python3 to the helper
script print_toolchain_versions.sh.
2018-09-25 09:22:41 +02:00
smlng
424830b06b
dist/tools: parse version info from stderr
...
Currently version information of commands and tools is only parsed
from STDOUT, however some tools like openocd print version info
to STDERR only. This commits adds parsing of STDERR for version
infos if STDOUT does not contain such info.
2018-09-25 09:22:41 +02:00
Leandro Lanzieri
31fa4fd64d
dist/tools: Add stm32loader flash utility
2018-09-18 18:07:42 +02:00
Francisco Acosta
89fa4da4c3
dist/tools/jlink: remove duplicated check
2018-09-11 17:29:12 +02:00
Francisco Acosta
ad87b2875e
dist/tools/jlink: remove setsid for launching JLinkExe for term
...
When executing `make test` on devices using JLink, testrunner
launches `make term` which calls `jlink.sh term_rtt`. When finished
the father process is killed but `setsid` has launched JLinkExe
as another subprocess, which is not killed by `os.killpg` from
testrunner since it doesn't belong to the same group.
2018-09-11 00:46:18 +02:00
Francisco Acosta
dfd349a05b
dist/tools/jlink: send output to /dev/null
...
While running `make term` JLinkExe is expecting commands and thus
can be disturbed by other JLink commands, e.g. `make reset`.
This enable `make test` (which runs those two commands at the same
time) on target using JLinkExe as a programmer/debugger.
2018-09-11 00:46:18 +02:00
0c1a207bf9
Merge pull request #9867 from kaspar030/pr/unify_app_folder_search
...
make: unify app folder search (examples/*, tests/*, ...)
2018-09-06 09:30:12 +02:00
de55265835
dist/tools/compile_test: make use of makefiles/app_dirs.inc.mk
2018-09-05 12:03:09 +02:00
Schorcht
e528fb8e2d
cpu: add esp8266 vendor files
2018-09-05 02:39:50 +02:00
cladmi
bc7e53f3d4
openocd.sh: include base address in IMAGE_OFFSET for binfiles
...
Add the rom base address to the flash address when flashing binaries.
This allows flashing binaries with the default openocd configuration.
It is an API change to IMAGE_OFFSET with binary files as it should now
only be an offset to the base address.
Force openocd type to '.bin' in case we want to flash hex/elf objects or
files not automatically recognized as bin.
2018-09-04 13:53:38 +02:00
cladmi
36b51467dd
openocd.sh: add functions to access board flash address
...
This allows getting the ROM base address.
It may not be available in the build system directly so better extract it from
openocd. Also openocd is board specific and this address is cpu specific
so would have definition order issue in the build system.
2018-09-04 13:50:46 +02:00
cladmi
5748d6a75f
openocd.sh: add a _is_binfile function
...
Returns 0 if it is true.
The test is based on the file extension, but also use the IMAGE_TYPE variable
to force setting to binary.
2018-09-04 13:49:45 +02:00
cladmi
60aac4a75b
openocd.sh: fix verify_image with IMAGE_OFFSET
...
When flashing with an IMAGE_OFFSET, it should also be passed to
verify_image. It is handling the base address in the image too.
This works with both elf files and binaries with the base address added.
2018-09-04 13:48:16 +02:00
cladmi
09f0930f59
openocd.sh: add a debug message when flashing with an offset
2018-09-04 13:48:12 +02:00
cladmi
5bb9babfe0
openocd.sh: update to bash
...
Update to bash to have `local` variables and `=~` regex matching.
Will be used in upcoming commits.
2018-09-04 13:46:25 +02:00
75dba75fbb
dist/tools/pyterm: handle ctrl+d nicely
2018-09-03 17:34:23 +02:00
a5714cc7c7
dist/tools/compile_test: fix flake8 issues
2018-08-31 08:50:52 +02:00
Semjon Kerner
a01eb37b6f
dist/tools/pyterm: change deprecated warn to warning
2018-08-23 12:23:59 +02:00
Leandro Lanzieri
28b832ad1f
dist/tools: Add option to set the value of RTS and DTR pins in pyterm
2018-08-22 11:13:45 +02:00
Leandro Lanzieri
9b0dd23ebf
dist/tools: Add option to invert DTR and RTS logic values in pyterm
2018-08-22 09:00:06 +02:00
Gaëtan Harter
cc63d2d21c
genconfigheader: use lazysponge for file management
...
Remove file management from `genconfigheader` script and use `lazysponge` in
Makefile.include.
Use --verbose option when in non QUIET building mode.
2018-08-20 11:34:55 +02:00
Gaëtan Harter
0528e0903f
dist/tools: add lazysponge tool
...
Write stdin to <outfile> if it is different from the previous content.
If data provided in stdin is the same as the data that was in <outfile>, it is
not modified so `last modification date` is not changed.
2018-08-20 11:34:49 +02:00
Gaëtan Harter
31aba49a31
Merge pull request #9759 from smlng/pr/pythonlibs/testrunner
...
dist: move testrunner to pythonlibs as package
2018-08-16 11:54:02 +02:00
Gaëtan Harter
a3c7d26a7d
dist/tools/has_minimal_version: add tool to check minimal version
...
usage: has_minimal_version.sh <version> <minimal_version> [toolname]
Checks that version >= minimal_version
Version format MAJOR.MINOR.PATCH ex 3.1.4
2018-08-14 15:26:51 +02:00
smlng
dd9a43bdc9
dist: move testrunner to pythonlibs as package
...
As testrunner is moved to dist/pythonlibs which is exported
via PYTHONPATH, testrunner is found by all test scripts.
2018-08-13 14:11:22 +02:00
Gaëtan Harter
5284849621
Merge pull request #9063 from bergzand/pr/shellcheck/initial
...
shellcheck: Add CI check script
2018-07-30 13:52:58 +02:00
c5c3903617
shellcheck: Add CI check script
2018-07-29 15:28:13 +02:00
Gaëtan Harter
3cb57b68c2
Merge pull request #9502 from dylad/pr/update_edbg
...
dist/tools: update EDBG version
2018-07-12 22:14:02 +02:00
dylad
edf0360103
dist/tools: update EDBG version
...
update to the current lastest version of EDBG to allow user to reflash a bricked board due to sleep mode or wrong clock assignment. this avoid the use of Atmel Studio to erase flash.
2018-07-10 15:10:40 +02:00
Martine Lenders
49036c7065
mosquitto_rsmb: add MQTT listener to config
...
This helped me a lot while testing #9464 to interact with the broker
using the mosquitto shell command clients.
2018-07-05 13:17:59 +02:00
Hauke Petersen
3ccb27d00d
tools: add mosquitto.rsmb MQTT-SN broker
2018-07-04 11:36:57 +02:00
Juan Carrano
6cfafc8923
tools/mkconstfs: Add an improved tool.
...
The new tool (mkconstfs2) features:
* more robust filename handling: no need for mangling,
and works on Windows.
* Better output generation: nothing is written in case
of failures.
* Allows more control over the files that are included:
- does not traverse directories, filenames must be explicitly
given.
- The "root" can be explicitly given (thus the tool can get
the same result independently of the CWD).
Thanks to MichelRottleuthner for making it work with Windows paths.
2018-07-02 10:15:56 +02:00
Gaëtan Harter
1087e49379
dist/tools/usb-serial: use RIOTTOOLS variable
2018-06-28 14:05:33 +02:00
Gaëtan Harter
b0b2835503
dist/tools/jlink: use RIOTTOOLS variable
2018-06-28 14:05:33 +02:00
Gaëtan Harter
41105bb23f
pic32prog: add a documentation on how to update PICkit3
...
To use pic32prog, the PICkit3 must be updated with a scripting mode firmware.
This describes how to do it on Linux using a windows VM (free).
2018-06-18 10:21:37 +02:00
Gaëtan Harter
ec2fe9a308
Merge pull request #9294 from smlng/pr/tools/cwd
...
tools: allow static checks to be run from any directory
2018-06-12 12:39:42 +02:00
Cenk Gündoğan
2706264908
Merge pull request #9292 from smlng/pr/tools/doccheck
...
tools/doccheck: adapt script to run on macOS
2018-06-12 10:28:43 +02:00
00828bb62d
dist/tools/doccheck: enable group check in CI
2018-06-11 19:12:02 +02:00
Martine Lenders
5cb5717a1f
Merge pull request #9293 from smlng/pr/tools/flake8
...
tools/flake8: fix regex in check script
2018-06-11 11:17:08 +02:00
smlng
cba319079c
tools/doccheck: adapt script to run on macOS
2018-06-11 09:50:32 +02:00
2f21e16915
dist/tools/doccheck: add check for undefined groups
2018-06-07 19:29:38 +02:00
smlng
1adb5852ec
tools: allow static checks to be run from any directory
2018-06-06 14:03:31 +02:00
smlng
c5f2ea6320
tools/flake8: add files exclude pattern for imported scripts
2018-06-05 15:22:07 +02:00
smlng
1891d42bc8
tools/flake8: fix files regex for macOS
2018-06-05 15:21:26 +02:00
22cb41b874
Merge pull request #8966 from kenrabold/riotpr
...
RISC-V: New CPU (FE310) and Board (HiFive1)
2018-05-30 09:47:26 +02:00
kenrabold
a6ba0d85ee
make: Ignore checking all vendor files
...
Ignore all files in any vendor directory, not just /include/vendor
2018-05-29 15:21:44 -07:00
Bas Stottelaar
1d78138816
dist: tools/licenses: add mit-short
2018-05-29 18:40:59 +02:00
Joakim Nohlgård
5816aa7419
dist: tools: git-cache: update to latest upstream
...
Upstream commit 04f04e5272f9fd68113a7f07ef034dd672630c79
04f04e5272
2018-05-17 20:42:23 +02:00
Gaëtan Harter
ef13d91bed
tools/check: use RIOTTOOLS variable
...
Follow up to #9067 and part of #8821
2018-05-14 15:47:53 +02:00
Gaëtan Harter
297ca898fe
dist/tools/desvirt: use RIOTTOOLS variable
2018-05-09 18:01:48 +02:00
1592de7bff
tools/flake8: fix shellcheck issues
2018-05-07 15:59:46 +02:00
2172074598
dist/tools/openocd: make reset before halt option in debug
2018-04-18 17:33:30 +02:00
f2a73c26cf
ci: print_toolchain_versions.sh: enlarge field width to 23
2018-04-13 12:04:08 +02:00
fa96289531
dist/tools/ci/print_toolchain_versions.sh: add riscv toolchain
2018-04-13 11:55:55 +02:00
89475e72f7
testrunner: spawnu 'make term' with 'codec_errors="replace"'
2018-04-11 22:42:12 +02:00
7c5d549d5d
dist/tools/flake8: use "python -m flake8", handle missing flake8
2018-04-05 09:40:31 +02:00
Bas Stottelaar
c04d831754
dist/tools: jlink: use GDB as default for DBG
2018-03-29 19:54:48 +02:00
smlng
a777f6fab0
tools: add helper script for xcompile with cmake
2018-03-27 19:02:06 +02:00
Sebastian Meiling
780f6046d8
Merge pull request #8745 from aabadie/pr/tools/print_doxygen_version
...
dist/tools/ci: also print doxygen and flake8 versions
2018-03-09 09:21:00 +01:00
80b7094488
dist/tools/ci: also print doxygen and flake8 versions
2018-03-05 18:42:39 +01:00
smlng
32cacd1743
tools: show diff for headerguards check on failure
...
fixes #8737
2018-03-05 13:54:51 +01:00
smlng
9968889c13
tools/ci: enhance print_toolchain script
...
- add generic command version printer
- add cmake version
- enhance output structure
2018-03-02 20:03:43 +01:00
Emmanuel Baccelli
401234f5d4
tools: added CC0 license pattern
2018-03-01 16:18:47 +01:00
b33f8a1b8b
dist/tools/edbg: fix typo in comment
2018-02-25 23:02:25 +01:00
Joakim Nohlgård
369267863c
ethos: Avoid EOF loops on detached stdin
...
Add a specific case of EOF on stdin to avoid situations where the
message `error reading from stdio. res=0` is repeated forever if stdin
is not a terminal. When ethos is started as a background process with
stdin redirected to /dev/null, e.g. `ethos ... < /dev/null &`, then
reading stdin will always result in a 0 length read (EOF).
If stdin is a tty we close the program on EOF (CTRL+D in the terminal),
otherwise, we stop reading from stdin after EOF was reached, but
continue tunneling traffic as usual.
2018-01-24 08:54:40 +01:00
Loïc Dauphin
86dec1b762
dist/tools: make teensy-loader-cli work on MACOSX
2018-01-17 18:14:00 +01:00
Hauke Petersen
45e0468ea4
tools/jlink: add RTT terminal support (term_rtt)
2018-01-15 23:01:34 +01:00
eaee364a1b
dist/tools/pyterm: fix flakes8 issues
2018-01-05 15:21:03 +01:00
c20948df09
dist/tools/pyterm: remove duplicate method in PubProtocol
...
probably a copy paste from
http://twistedmatrix.com/documents/13.0.0/core/howto/servers.html#auto1
'numProtocols' is not used anywhere else so we keep the second version
of the 'connectionLost' function.
2018-01-05 15:18:51 +01:00
9578d17e93
dist/tools/flake8: update changed files regexp
...
to explicitly include pyterm
2018-01-05 13:39:25 +01:00
fa3c033949
Merge pull request #8306 from aabadie/pr/flake8/fix_header_guards
...
dist/tools/headerguards: fix flake8 issues
2018-01-03 17:17:47 +01:00
Martine Lenders
0f8721dfdf
Merge pull request #8308 from aabadie/pr/flake8/fix_mkconstfs
...
dist/tools/mkconstfs: fix various flake8 issues
2017-12-27 11:51:29 +01:00
6f99a98205
Merge pull request #8290 from smlng/ci/toolchain/print_git_version
...
toolchains: print git version
2017-12-21 11:54:06 +01:00
cfe2885720
dist/tools/headerguards: fix flake8 issues
2017-12-21 09:21:34 +01:00
f124e38475
dist/tools/mkconstfs: fix various flake8 issues
2017-12-20 16:48:56 +01:00
58ab6dd3fe
dist/tools/testrunner: fix flake8 remaining issues
2017-12-20 13:34:52 +01:00
2b5f185f40
Merge pull request #8293 from smlng/enh/tools/tapsetup
...
tools/tapsetup: try to retrieve user name if not set
2017-12-19 19:46:32 +01:00
Gaëtan Harter
a40e9bac5c
Merge pull request #8078 from aabadie/pr/python_style_check
...
dist/tools: add Python style check in static tests
2017-12-19 18:42:49 +01:00
smlng
24d79ca11b
tools/tapsetup: try to retrieve user name if not set
2017-12-19 17:56:48 +01:00
smlng
e18aa35559
toolchains: print git version
2017-12-19 16:20:21 +01:00
Sebastian Meiling
631705d743
Merge pull request #8053 from cladmi/pr/testrunner/make_start_delay_configurable
...
dist/tools/testrunner: Make started wait time configurable
2017-12-18 11:09:49 +01:00
035bdf7dcb
dist/tools: add PEP8 check to static tests
2017-12-15 15:07:50 +01:00
Martine Lenders
90d2060188
docheck: make doccheck executable from any directory
...
The doccheck script reports reports a false positive when executed from
any directory but `RIOTBASE`. With this fix, `make doc` changes into
the currently unused `RIOTBASE` variable.
This is an alternative approach to #7217 , which removes this variable,
but keeps the false positive aspect of the script untouched.
2017-12-07 11:01:49 +01:00
Martine Lenders
83930a0625
dist: add commit message length checker
2017-12-06 12:04:34 +01:00
Gaëtan Harter
58f6df24cd
dist/tools/testrunner: Make started wait time configurable
...
The wait before board is started is 3 by default but can be overwritten by
setting 'TESTRUNNER_START_WAIT' environment variable.
2017-12-04 15:10:30 +01:00
Gaëtan Harter
da24cdaf3f
Merge pull request #8058 from haukepetersen/opt_boards_usecommon
...
boards: move shared code to boards/common/xx
2017-11-30 10:54:16 +01:00
Hauke Petersen
2ead5ef3a0
tools/testrunner: minor code beautifications
2017-11-30 10:34:37 +01:00
Hauke Petersen
a7c1a3f689
tools/changed_files: adapt for common board dirs
2017-11-30 10:26:36 +01:00
Lucas Jenss
33002325d5
tools/pyterm: Notify user if wrong serial package is installed
...
When installing the `serial` package (in contrast to `pyserial`)
the pyterm script will print a cryptic error message and fail.
This is because both packages, though unrelated, expose a `serial`
package (whereas pyserial should expose `pyserial`).
This change catches the error and might save some precious lifetime
of unsuspecting RIOT users, such as myself.
2017-11-28 20:00:37 +01:00
b109b9ff99
dist/tools/pyterm: exit without traceback on keyboard interrupt
2017-11-27 13:19:48 +01:00
Martine Lenders
16e2829258
Merge pull request #7959 from antmicro/feature/renode-integration
...
makefiles: tools/renode: add support for Renode
2017-11-24 18:43:31 +01:00
smlng
013f325569
tools: move sniffer to applications repo
2017-11-23 10:24:39 +01:00
Michael Gielda
512445a66f
Update README.md for release 1.1 + link to docs
2017-11-21 15:22:55 +01:00
Joakim Nohlgård
57de166ea1
makefiles: Refactor openocd tool handling
...
Attempt to decouple board configuration from debugger interface
configuration by specifying the DEBUG_IFACE variable for the debug
hardware interface to use.
2017-11-17 10:03:05 +01:00
Hauke Petersen
d7e11cd216
tools: remove toolchain build script for x86
2017-11-16 10:42:09 +01:00
Hauke Petersen
acaa092d6f
dist/tools/ci: do not call make for qemu-i386
2017-11-16 10:42:09 +01:00
Martine Lenders
410778303e
testrunner: make traceback extraction downwards-compatible
...
The object-like access to frame information in the traceback was only
introduced in Python 3.5. Before that version it was a 4-tuple [[1]].
The indexed way to access the frame seems to be upwards-compatible for
newer versions (tested with python 3.5, maybe some of the Arch crew can
test with even newer versions), so I used that one.
[1]: https://docs.python.org/3.4/library/traceback.html#traceback.extract_tb
2017-11-15 14:51:39 +01:00
dcc1ae393c
dist/tools/pr_check: fix regex pattern to recognize any SHA
2017-11-13 16:43:12 +01:00
Cenk Gündoğan
e1422bb5e4
testrunner: handle EOF and ProcessLookupError
2017-11-12 13:13:50 +01:00
Cenk Gündoğan
d537dd609f
testrunner: refactor exception printing
2017-11-12 13:13:50 +01:00
Martine Lenders
18fb51cf66
testrunner: show information about failed line (even without traceback)
2017-11-12 12:27:21 +01:00
Cenk Gündoğan
05c9267a49
Merge pull request #7996 from aabadie/pr/testrunner_pep8
...
dist/tools/testrunner: fix some pep8
2017-11-10 23:44:43 +01:00
Peter Kietzmann
40e2a5a5f1
Merge pull request #7997 from cgundogan/pr/vagrant_info
...
vagrant: add info to README.md for Windows quirks
2017-11-10 15:35:06 +01:00
Cenk Gündoğan
50443708aa
vagrant: add info to README.md for Windows quirks
2017-11-10 15:21:03 +01:00
a8275ea637
dist/tools/testrunner: fix some pep8
2017-11-10 13:26:15 +01:00
Piotr Zierhoffer
b424274a72
makefiles: tools/renode: add support for Renode
2017-11-08 12:43:09 +01:00
Martine Lenders
7ea0ba1a7e
Merge pull request #7710 from tfar/sandbox/2017/10/fix-edbg-macos-build
...
dist/tools/edbg: clear INCLUDES and LINK env vars before building
2017-11-07 22:32:33 +01:00
Tobias Markmann
3d0a350ebc
dist/tools/edbg: Clear environment before building edbg
...
This fixes compilation on macOS. Without this, autoconf
might pick up INCLUDES and LINKER variables causing compilation
and linking errors.
2017-11-07 21:26:42 +01:00
Cenk Gündoğan
ce8d880513
packer: add dfu-util and bluepill udev rules
2017-11-03 13:44:39 +01:00
9b32d18e92
Merge pull request #7904 from basilfx/bugfix/jlink
...
dist/tools: check DBG env var.
2017-11-01 17:39:22 +01:00
Adrian GHC
cf148528c0
dist: Update Vagrant packer files to include xstlproc and Ubuntu 16.04.3
2017-10-29 15:55:50 +01:00
Bas Stottelaar
7e7d5d30f0
dist/tools: check DBG env var.
2017-10-29 15:06:46 +01:00
Joakim Nohlgård
af9ab30234
Merge pull request #7750 from miri64/dist/enh/clean-up-after-buildtest
...
dist: compile_test: cleanup after buildtest
2017-10-27 14:51:09 +02:00
Martine Lenders
fe38901588
dist: compile_test: cleanup after buildtest
...
We are at a point were building all of RIOT takes massive amounts of
storage. Since my machine runs full after only compiling ~20
applications (I have ~170 GB free storage if the RIOT repo is clean).
Thus the easiest solution for the compile tests is to just clean-up the
mess they made ;-).
2017-10-26 12:19:58 +02:00
Hauke Petersen
1928d1c0e9
tools/testrunner: wait 3s after 'make term'
2017-10-25 12:28:45 +02:00
Joakim Nohlgård
dd95f593a0
openocd: Run verify after write without intermediate reset
...
Fixes problems with the watchdog interfering on Kinetis K devices
when USE_OLD_OPENOCD=0.
2017-10-18 14:34:20 +02:00
Joakim Nohlgård
7713bede99
openocd: Refactor openocd.sh script
...
- Merge flash and flash-elf commands since they were identical except
for the file name of the image
- Split GDB command from DBG environment variable to allow more easily
configure front-ends for GDB via environment variables.
- Remove verbose tests of empty variables and replace by `: ${VAR:=default}`
- Remove passed command line arguments to sub-functions, they were
unused in the functions anyway.
- Remove TUI variable, use `export DBG_EXTRA_FLAGS=-tui` to get the same
result.
2017-10-18 14:34:20 +02:00
Martine Lenders
b74ee8869b
slip: port to be used with netdev
2017-10-10 23:14:12 +02:00
Lucas Jenss
556baf07a1
dist/tools/cppcheck: Allow individual files to be cppchecked
2017-10-10 10:59:02 -07:00
smlng
49a4dda7d2
tools: ignore vendor files on whitespace check
2017-09-20 15:26:10 +02:00
162478cd6d
spelling: s/initialise/initialize/
2017-09-05 11:04:25 +02:00
Joakim Nohlgård
503976c663
dist/tools/ethos: Build escaped packet in buffer before writing to UART
...
Significantly improves throughput and latency on FRDM-KW41Z.
Ping with a packet of size 100 yields a 30 ms roundtrip with this
patch, 177 ms without. Size 1000 ping before: 1160 ms, after: 188 ms
2017-08-18 08:12:44 +02:00
Sebastian Meiling
422b42ce65
Merge pull request #7338 from aabadie/edbg_remaining_boards
...
boards: use EDBG flasher with arduino-zero and saml21-xpro
2017-08-17 09:16:39 +02:00
kYc0o
b19fcba019
dist/tools/jlink: add flashing offset when set
2017-07-17 14:48:29 +02:00
b16118ab6e
dist/tools/edbg: bump version to include support for SAML21J18A
2017-07-14 23:27:16 +02:00
kYc0o
f464cf830a
dist/tools: add imgtool
2017-07-06 23:26:56 +02:00
Thomas Eichinger
219ffb3847
Merge pull request #7283 from smlng/dist/tools/edbg/fix_macos
...
tools, edbg: fix compiler issue on macos
2017-07-04 13:48:24 -07:00
smlng
efcc275091
tools, edbg: fix compiler issue on macos
2017-06-30 20:16:29 +02:00
kYc0o
c0b2182d01
dist/tools/bossa: add patch for OS X build
2017-06-30 16:44:47 +02:00
d69352a237
dist/tools: add dlcache.sh
2017-06-17 17:00:55 +02:00
Cenk Gündoğan
1186029102
packer: add custom udev rules
2017-06-02 11:09:33 +02:00
Cenk Gündoğan
901bbf6898
packer: import openocd udev rules
2017-06-02 10:44:21 +02:00
e99a834487
dist: tools: coccinelle: add documentation
2017-05-30 21:38:03 +02:00
Martine Lenders
386be92a66
Merge pull request #7105 from cgundogan/pr/packer_libudev
...
dist: packer: update and add libudev-dev
2017-05-30 14:06:33 +02:00
BytesGalore
eac2b0c761
dist/edbg: forward commit hash to added samr21-xpro (rev D)
2017-05-30 08:59:11 +02:00
Cenk Gündoğan
f18936a7d9
dist: packer: update and add libudev-dev
2017-05-29 19:26:55 +02:00
Martine Lenders
d4693648ba
Merge pull request #7095 from kaspar030/add_headerguard_check_script
...
dist: tools: add headerguard check script
2017-05-24 18:08:29 +02:00
60fb6d2d50
dist: tools: changed_files.sh: add msba2 tools to exclude list
2017-05-24 17:54:02 +02:00
ed31db4702
dist: tools: build_and_test.sh: add header guard check
2017-05-24 17:54:01 +02:00
de07fe07e5
dist: tools: headerguard: initial commit
2017-05-24 17:54:01 +02:00
6a9175944c
dist: tools: add edbg
2017-05-24 14:52:44 +02:00
c53e9271ba
dist: tools: bossa: add makefile rule to clean generated binary
2017-05-22 16:18:07 +02:00
Hauke Petersen
fb82e246d9
tools: add means to download and build BOSSA
2017-05-22 11:42:00 +02:00
Sebastian Meiling
4bc77be282
Merge pull request #6966 from miri64/doccheck/enh/show-doc-warning
...
doccheck: actually show warning, not just file
2017-05-17 13:49:03 +02:00
Martine Lenders
0f2fa7883c
doccheck: actually show warning, not just file
2017-05-17 13:01:13 +02:00
d2362c1c74
Merge pull request #7057 from gautric/master
...
use MD5 as environment variable
2017-05-16 10:18:16 +02:00
gautric
89cd127e31
dist/tools/toolchains: use MD5 as environment variable
2017-05-16 10:05:57 +02:00
564448ae96
dist: tools: coccinelle: add enable_debug_false.cocci
2017-05-15 16:36:44 +02:00
a7ad4f0469
dist/tools/coccinelle: add remove_atoi_cast.cocci
2017-05-13 12:37:09 +02:00
d603367c08
dist/tools/ci/print_toolchain_versions.sh: add coccinelle
2017-05-12 13:17:53 +02:00
98c359d231
dist/tools/ci/changed_files.sh: add coccinelle includes to EXCLUDE
2017-05-12 13:17:53 +02:00
9acc5282af
dist: tools: introduce coccinelle static testing
2017-05-12 13:17:53 +02:00
bb24b1d77b
Merge pull request #7039 from kaspar030/fix_in-function_static_variables
...
cleanup: remove unused in-function static variable properties (coccinelle)
2017-05-12 13:17:03 +02:00
8611650078
dist/tools/uhcpd: remove unnecessary static properties (partly found by coccinelle)
2017-05-11 13:46:24 +02:00
a7e55a17cf
dist/tools/ci/build_and_test.sh: adapt to changed check scripts
2017-05-11 12:12:54 +02:00
a02472d1fa
dist/tools/licenses/check.sh: make use of changed_files.sh
2017-05-11 12:12:54 +02:00
e24becc02a
dist/tools/externc: use of changed_files.sh
2017-05-11 12:12:54 +02:00
9b045c127f
dist/tools/cppcheck: use changed_files.sh
2017-05-11 12:12:54 +02:00
5a4ea3b45d
dist/tools/ci: introduce changed_files.sh
2017-05-11 12:12:54 +02:00
1ec3c0a57a
Revert "dist: cppcheck: switch back to 8 jobs"
...
This reverts commit ec97a94626
2017-04-25 19:31:02 +02:00
Oleg Hahm
ec97a94626
dist: cppcheck: switch back to 8 jobs
2017-04-14 14:36:17 +02:00
Oleg Hahm
76e884e346
dist: ci: removed obsolete TODO regarding cppcheck
2017-04-14 14:36:17 +02:00
Oleg Hahm
2cb16c5ff4
dist: tunslip: fix cppcheck warnings
2017-04-14 14:36:16 +02:00
Oleg Hahm
3a304f10ee
dist: enable cppcheck warnings for all files
2017-04-14 14:36:13 +02:00
6ef21a8fd3
dist: tools: print_toolchain_versions.sh: add cppcheck version
2017-04-06 14:20:23 +02:00
Neil Jones
65911f3499
cppcheck: Don't Run cppcheck on ASM files.
...
cppcheck doesn't understand ASM style comments beginning with '#' and tries to
parse them:
I get this error:
cpu/mips_pic32_common/reset_mod.S:84: error (syntaxError): syntax error
from this line:
beqz s1, init_resources # Branch if this is NOT an NMI exception.
If I place the comment inside C-style comments cppcheck passes, ie
beqz s1, init_resources # /*Branch if this is NOT an NMI exception.*/
Note current in-tree ASM files fail cppcheck (they must have been added before
this check) for example:
cpu/lpc2387/asmfunc.s
2017-03-29 15:14:43 +01:00
Emmanuel Baccelli
9de3484c12
Doc: improved README for new boards in Vagrant
2017-03-28 20:22:47 +02:00
Martine Lenders
29842bb5e4
netdev2: rename to netdev and remove gnrc_netdev
...
With some minor hand-edits I used the following chain of commands:
```sh
git rm sys/include/net/gnrc/netdev.h
git grep --name-only -i netdev2 | \
xargs sed -i -e 's/^\(NETDEV\)2\(.*\)\( [("]\)/\1\2 \3/g' \
-e 's/\(netdev\)2\(.*\)\( \/\*\*<\)/\1\2 \3/I' \
-e 's/\(netdev\)2/\1/gI'
git add -p
git commit --amend
git ls-tree --full-tree -r HEAD --name-only | \
grep "netdev2" | xargs -I'{}' dirname '{}' | uniq | \
grep "netdev2" | while read dir; do
new_dir="$(echo "$dir" | sed "s/netdev2/netdev/g")"
git mv -f "$dir" "$new_dir"
done
git commit --amend
git ls-tree --full-tree -r HEAD --name-only | \
grep "netdev2" | while read file; do
new_file="$(echo "$file" | sed "s/netdev2/netdev/g")"
git mv -f "$file" "$new_file"
done
git commit --amend
git grep --name-only "\<drivers_netdev_netdev\>" | \
xargs sed -i "s/\<drivers_netdev_netdev\>/drivers_netdev_api/g"
git add -p
git commit --amend
```
2017-03-15 09:31:20 +01:00
Oleg Hahm
44604a9ed5
tools: make doccheck check all files
2017-03-10 14:56:48 +01:00
Joakim Nohlgård
dcc37329df
sys/vfs: A virtual file system (VFS) layer for RIOT
...
The VFS layer provides file system abstractions to allow using a unified
interface to access files from mounted file systems.
2017-03-07 17:59:57 +01:00
Joakim Nohlgård
5638359960
tools/externc: Remove #endif in extern C pattern match
...
Enable adding more C++ specifics inside the same ifdef block (e.g. sys/include/vfs.h)
2017-03-07 10:21:52 +01:00
Hauke Petersen
19bf9f8d0f
dist/externc: exclude all (CPU) vendor headers
2017-03-07 08:55:16 +01:00
Hauke Petersen
0fb3ee3b9b
dist/cppcheck: exclude only vendor headers
2017-03-07 08:55:15 +01:00
Thomas Eichinger
4aaf8dd616
tools/tapsetup: change default bridge name on macOS
...
The default bridge name used by tapsetup `bridge0` is already used
by the macOS. This changes the default to `bridge42`.
2017-02-23 14:57:36 -08:00
Joakim Nohlgård
9ed393426e
dist/tools/cppcheck: Add missing hpp file name pattern
2017-02-16 17:09:25 +01:00
Neil Jones
ceb0fa9205
dist: update toolchain info script for mips
2017-02-09 15:54:59 +00:00
Joakim Nohlgård
4bc120f54d
dist/tools/licenses: Add BSD 1 clause style license from newlib sys/features.h
...
Used in msp430-common
2017-02-08 16:23:50 +01:00
Jason Tran
de8c3f0a85
dist/tools/jlink: remove jlink confirmation prompt
2017-01-24 19:42:06 -08:00
Martine Lenders
819987c58c
dist/tools: add release stats script
2017-01-24 14:35:07 +01:00
Martine Lenders
a5bdf0a831
Merge pull request #6407 from OlegHahm/header_guards
...
*: remove trailing underscores from header guards
2017-01-20 01:51:20 +01:00
Oleg Hahm
7ee7801c10
*: remove trailing underscores from header guards
2017-01-19 18:30:53 +01:00
Joakim Nohlgård
78e207bc33
dist/tools/ci: Fix command output formatting of last line
2017-01-19 14:13:36 +01:00
Cenk Gündoğan
4b05722477
dist/tools/ci: toolchain versions: fix output to show avr-libc
2017-01-19 14:13:36 +01:00
Joakim Nohlgård
05769dddee
dist/tools/ci: toolchain versions: Fix heading formatting
2017-01-19 14:13:36 +01:00
Joakim Nohlgård
001a30ef4f
dist/tools/ci: Add script for printing installed toolchain versions to CI log
2017-01-19 09:12:26 +01:00
d340cce157
Merge pull request #6310 from OlegHahm/pyterm_show_prompt
...
tools: pyterm: display received prompt immediately
2017-01-19 00:05:14 +01:00
Cenk Gündoğan
90e85ca1de
Merge pull request #6389 from gebart/pr/ci-output-whitespace
...
CI: fix whitespace handling in command output
2017-01-18 20:10:47 +01:00
Oleg Hahm
3fb2984d2a
tools: pyterm: display received prompt immediately
2017-01-18 19:54:10 +01:00
Andreas "Paul" Pauli
e0b6f16ddc
cc2538-bsl.py: add chip id for cc2538em
2017-01-18 16:18:05 +01:00
Joakim Nohlgård
39d02c9ccf
dist/tools/ci: Fix whitespace handling in command output
...
All newlines were stripped before and leading whitespace was trimmed
which made the output very difficult to read.
2017-01-17 13:00:37 +01:00
Antonio Galea
2fa4ad3833
reconnecting a USB-serial dongle under Linux might give permission errors until udev scripts complete
2017-01-15 16:59:36 +01:00
17b35f6ece
dist: tools: git-cache: bump version
...
adds OSX fixes for md5sum, flock
2017-01-12 17:31:57 +01:00
26ace09ca8
Merge pull request #6321 from kaspar030/bump_gitcache
...
dist: tools: git-cache: bump to latest upstream
2017-01-11 18:43:08 +01:00
eecf43cd53
dist: tools: git-cache: update README
2017-01-11 16:07:42 +01:00
Martine Lenders
fea78bad60
Merge pull request #6309 from OlegHahm/pyterm_format_arg
...
tools: pyterm: specify custom format prefix via command line
2017-01-11 10:30:08 +01:00
b0dad94ab5
dist: tools: git-cache: bump to latest upstream
2017-01-11 01:02:56 +01:00
Martine Lenders
600fdb8f2c
Merge pull request #5865 from gebart/pr/compile-test-py3
...
dist/tools/compile_test: Add Python3 support
2017-01-10 22:11:28 +01:00
Oleg Hahm
3a779b92fa
tools: pyterm: specify format prefix via argument
2017-01-10 18:55:49 +01:00
Joakim Nohlgård
06092aaca5
dist/tools/compile_test: Add Python3 support
...
Tested with Python 2.7.12 and Python 3.4.5
2017-01-10 13:36:53 +01:00
Oleg Hahm
486ca73308
tools: pyterm: properly handle custom output fmt
2017-01-10 11:44:24 +01:00
Francisco Acosta
1ae6998752
Merge pull request #5677 from gebart/pr/fugly-tunslip6
...
dist/tools/tunslip: Fix some ugly code
2017-01-06 15:12:39 +01:00
