Failing to provide any of the required features can provide a message
such as:
There are unsatisfied feature requirements: periph_uart|periph_lpuart
This can be confusing and may hide the actual. E.g. above message
was generated when using SPI on the `msb-430` and `stdio_uart`. However,
the MSB-430 board *does* provide `periph_uart`, so this looks like a bug
in the feature resolution. This changes the failure mode of
`FEATURES_REQUIRED_ANY` to just pick the first of the alternatives
given if none of the alternative is usable, which gives in the example
the following message instead:
The following features may conflict: periph_spi periph_uart
Rationale: Both SPI and UART are provided by the same USART
peripheral
The output is less surprising and can provide non-obvious reasons
why `FEATURES_REQUIRED_ANY` failed to pick a feature. The downside is
that the alternatives are no longer visible. However, that output
likely was so confusing this might be for the best.
Co-authored-by: mguetschow <mikolai.guetschow@tu-dresden.de>
The legacy `riscv-none-embed` target triple is incorrect and the
toolchain using it has long been obsolete. With our CI no longer
using the obsolete toolchain, there is no need to handle that one
anymore.
The CI now uses `riscv-none-elf` over the previous (and technically
incorrect) `riscv-none-embed`. In addition, we no longer probe for
host toolchains with the incorrect target triple, as the source
providing it has long declared the toolchain with the incorrect
triple as obsolete.
This adds mspdebug as package, similar to EDBG, so that the
programmer/debugger is build from source.
This has the advantage that we can indeed provide patches of our own.
The first patch fixes a bug with the CPU detection of `mspdebug` in
combination with the Olimex MSP430-JTAG-TINY-V2. The second adds the
`--expect-id <CPU_NAME>` argument.
The RIOT integration is updated to directly make use of the
`--expect-id` parameter. No more spending time debugging why firmware
the firmware for the `olimex-msp430-h2618` doesn't run when flashed on
the `olimex-msp430h1611` hardware :D
Adds a separate board for native64 instead of the `NATIVE_64BIT` workaround.
The files in `boards/native64` are more or less dummy files and just include
the `boards/native` logic (similar to `openlabs-kw41z-mini-256kib`).
The main logic for native is in `makefiles/arch/native.inc.mk`, `cpu/native`
and `boards/native`.
The remaining changes concern the build system, and change native board checks
to native CPU checks to cover both boards.
This target allows one to check if a test-input-hash is there and if it differs from
a new one, adding basic support to skip tests if nothing needs to be run.
RIOT_TEST_HASH_DIR represents the dir to generate the test-input-hash.sha1 file for
checking if a test has changed, uses BINDIR by default.
Since it defaults to BINDIR it should have no effect on running systems.
This allows a bit more fine grain control, especially when using
the compile_and_test_for_board.py script.
The checks would print their prominently colored warnings and confuse
users, and the comments are more geared to those editing the Makefiles
than to those watching which commands get executed.
Back when specific control of the Rust version used with RIOT was
needed, CARGO_CHANNEL was added to explicitly set the Rust version with
consideration for CI special cases.
Rust's mechansims of selecting a toolchain can be used instead now.
When `stdio_cdc_acm` is used, prefer selecting the USB devices with
vendor `RIOT-os.org` and model `$(BOARD)` and only fall back
to `$(TTY_BOARD_FILTER)` if no such TTY was found.
This makes it possible to add a TTY board filter matching only an
integrated USB to UART bridge, but still do the right thing when
the user explicitly uses `stdio_cdc_acm` instead of the default
`stdio_uart`.
Allow setting `OPENOCD_TRANSPORT` to `default` for when a transport to
not explicitly set the transport. This is useful when the target or
interface script already specify the transport.
If external boards defined in one of the EXTERNAL_BOARD_DIRS folders
pulls in a header file external to the RIOT tree and added to the build
via the INCLUDES macro, the build will fail to find the header.
This patch adds the INCLUDES macro to the bootloader build step so that
the headers can be found.
