Joakim Nohlgård
078104223a
Merge pull request #8732 from girtsf/cortexm-fix-no-mpu
...
cortexm_common: don't try to set MEMFAULTENA on ARMv6-M
2018-03-13 21:06:21 +01:00
06392bbfd3
cpu/stm32f1: add flashpage_raw support
2018-03-13 16:30:04 +01:00
4f7dc1ae41
cpu/stm32f0: add flashpage_raw support
2018-03-13 16:30:04 +01:00
4e1f2b5d38
cpu/stm32l1: add flashpage support
2018-03-13 16:30:04 +01:00
4972f952d4
cpu/stm32l0: add flashpage support
2018-03-13 16:30:04 +01:00
67190a31ef
cpu/stm32_common: unify flashpage support
2018-03-13 16:30:04 +01:00
Girts Folkmanis
b9744f698f
cortexm_common: don't try to set MEMFAULTENA on ARMv6-M
...
Before this change, if one tried to build a Cortex-M0+ target that had
an MPU, compilation would fail due to missing
'SCB_SHCSR_MEMFAULTENA_Msk' in SCB structure. Cortex-M0+ is a ARMv6-M
arch (unlike most other targets that have MPU support). ARMv6-M has more
limited support for fault conditions, see ARMv6-M Architecture Reference
Manual, D3.6.2.
2018-03-12 19:57:29 -07:00
Aurelien Fillau
0368239a63
cpu/stm32l0: power management updated
...
Now, MCU is able to go in stop mode if necessary when
periph_pm feature is activated.
Regarding LPSDSR bit that deactivates or not regulator in stop
mode, it is up to the user to set/clear this bit. In order
to save power, voltage regulator can be set in low power state
during stop mode but it increases wakeup time.
Signed-off-by: Aurelien Fillau <aurelien.fillau@gmail.com>
2018-03-11 11:01:25 +01:00
d025de32ed
Merge pull request #8351 from kaspar030/introduce_iolists
...
net: Introduce iolists
2018-03-07 09:56:13 +01:00
fcb451b2c5
Merge pull request #8743 from dylad/saml21_fix_rtc_define
...
cpu/saml21: fix RTC wrong condition for #if
2018-03-07 07:41:33 +01:00
dylad
20ac4b060d
cpu/saml21: fix RTC wrong condition for #if
2018-03-06 21:36:18 +01:00
Francisco Acosta
c922119fe4
Merge pull request #8744 from Josar/atmega_stackPointer
...
atmega: add last instruction print
2018-03-06 16:16:07 +01:00
7f150d6041
Merge pull request #7787 from OTAkeys/pr/stm32_pm_periph
...
cpu/stm32: add pm support in uart, spi and i2c (f4)
2018-03-06 16:34:44 +02:00
Hauke Petersen
e78b055787
Merge pull request #8556 from kaspar030/stm32_gpio_read
...
cpu: stm32_common: always do gpio_read() from input register
2018-03-06 15:30:01 +01:00
Vincent Dupont
857b44a975
cpu/stm32f4: add pm support in i2c driver
2018-03-06 15:13:02 +01:00
Vincent Dupont
34e8609f2c
cpu/stm32_common: add pm support in spi driver
2018-03-06 15:13:01 +01:00
Vincent Dupont
1aee2f1f14
cpu/stm32_common: add pm support in uart driver
2018-03-06 15:13:00 +01:00
Vincent Dupont
c01e8629ec
cpu/stm32_common: add PM modes
2018-03-06 15:12:58 +01:00
Josarn
d82f1eba4c
atmega: add last instruction print
...
Signed-off-by: Josua Arndt <josuaarndt@live.de>
2018-03-06 14:57:18 +01:00
58e172e4df
cpu/stm32_common: always enable PWR module
2018-03-06 14:55:32 +01:00
Hauke Petersen
c14b8081bc
Merge pull request #8735 from kaspar030/stm32_unify_cpu_init
...
cpu/stm32: unify cpu_init()
2018-03-06 14:09:13 +01:00
23b414b732
drivers: net: adapt to iolist-using netdev
2018-03-06 14:00:31 +01:00
ff6b8aa4f1
cpu/native/netdev_tap: adapt to netdev with iolist
2018-03-06 14:00:31 +01:00
Francisco
0fd12487e1
cpu/stm32l4: add support for stm32l452re
2018-03-05 14:34:16 -03:00
3b42fb49b5
cpu/stm32: unify cpu_init()
2018-03-05 12:35:00 +01:00
Hauke Petersen
47a500d0b1
Merge pull request #8447 from haukepetersen/opt_test_periphuartpower
...
tests/periph_uart: included power_on/off() in test
2018-03-05 09:49:20 +01:00
Joakim Nohlgård
68ea6b3316
kinetis: Add support for NXP Kinetis KW41Z SoC
2018-03-02 15:38:39 +01:00
Joakim Nohlgård
2090dd0234
kinetis: Add GPIO ISR for CPUs with combined PORTB+PORTC interrupt
2018-03-02 15:38:39 +01:00
Joakim Nohlgård
8642c8ceb8
kinetis: Support CM0+ devices with 96 bit UID
2018-03-02 15:38:39 +01:00
Joakim Nohlgård
005b4bfbb3
kinetis: Filter out PWM code if no FTM exists
2018-03-02 15:38:39 +01:00
Joakim Nohlgård
11361ec7e1
kinetis: Add support for CPUs with a single IRQ for all PIT channels
2018-03-02 15:38:39 +01:00
Joakim Nohlgård
2b64452c33
kinetis: GPIO workaround for missing open drain support
2018-03-02 15:38:39 +01:00
Joakim Nohlgård
a196bb431d
kinetis: Only configure PWM settings if the FTM device exists
2018-03-02 15:38:39 +01:00
Joakim Nohlgård
ba76402d03
kinetis: Add Bit Manipulation Engine helpers
2018-03-02 15:38:39 +01:00
Joakim Nohlgård
18908667a3
kinetis: Make open drain GPIO availability depend on CPU header
2018-03-02 15:38:39 +01:00
Joakim Nohlgård
a7f06f8c42
Merge pull request #8724 from gebart/pr/kinetis-lpuart-clocking
...
kinetis: Set LPUART clock source during uart_lpuart_init
2018-03-02 15:38:01 +01:00
Peter Kietzmann
215940b058
Merge pull request #8643 from Josar/jiminy_master
...
boards: Jiminy-mega256rfr2: initial support
2018-03-02 15:24:39 +01:00
Joakim Nohlgård
2bdf0bfbf1
kinetis: Align definitions in cpu_conf_kinetis.h
2018-03-02 14:39:00 +01:00
Joakim Nohlgård
82e960b642
kinetis: Set LPUART clock source during uart_lpuart_init
2018-03-02 14:39:00 +01:00
Josarn
3c906c6c3d
cpu/atmega256rfr2: ATmega256rfr2 MCU support
...
Signed-off-by: Josua Arndt <josuaarndt@live.de>
Signed-off-by: Steffen Robertz <steffen.robertz@online.de>
2018-03-02 13:33:53 +01:00
Josarn
3bace2bd24
cpu/atmega-common: Adjustments Jiminy-mega256rfr2
...
Signed-off-by: Josua Arndt <josuaarndt@live.de>
Signed-off-by: Steffen Robertz <steffen.robertz@online.de>
2018-03-02 13:33:26 +01:00
Francisco Acosta
2e701bd535
Merge pull request #8725 from gebart/pr/kinetis-errata-func
...
kinetis: Move errata workarounds to separate function
2018-03-02 12:30:16 +01:00
Francisco Acosta
a31940eee4
Merge pull request #8723 from gebart/pr/kinetis-periph-cpu-doc-fix
...
kinetis: periph_cpu.h doc fix
2018-03-02 12:03:06 +01:00
Hauke Petersen
4fd16b0bcc
cpu/native: add empty uart/power_x functions
2018-03-02 10:54:21 +01:00
Hauke Petersen
2fc724db7e
cpu/lpc2487: add empty uart/power_x functions
2018-03-02 10:53:55 +01:00
Hauke Petersen
8ac3465ba7
cpu/kinetis: add empty uart/power_x functions
2018-03-02 10:53:55 +01:00
Hauke Petersen
ce9e6f4eb0
cpu/atmega_common: add empty uart/power_x functions
2018-03-02 10:53:55 +01:00
Joakim Nohlgård
fd76e5ddad
kinetis: Move errata workarounds to separate function
2018-03-02 08:17:00 +01:00
Joakim Nohlgård
f5edf56be4
kinetis: periph_cpu.h doc fixes
2018-03-02 08:06:46 +01:00
Joakim Nohlgård
a11c66382f
kinetis: Add dependency on rtt for LPTMR time base
2018-03-02 07:37:14 +01:00
