RIOT/boards/lobaro-lorabox/include/periph_conf.h

/*
 * Copyright (C) 2014-2016 Freie Universität Berlin
 *               2018 HAW Hamburg
 *
 * This file is subject to the terms and conditions of the GNU Lesser
 * General Public License v2.1. See the file LICENSE in the top level
 * directory for more details.
 */

/**
 * @ingroup     boards_lobaro_lorabox
 * @brief       Support for the Lobaro lorabox with stm32l151cb
 * @{
 *
 * @file
 * @brief       Peripheral MCU configuration for the Lobaro lorabox board
 *
 * @author      Thomas Eichinger <thomas.eichinger@fu-berlin.de>
 * @author      Hauke Petersen <hauke.petersen@fu-berlin.de>
 * @author      Kevin Weiss <kevin.weiss@haw-hamburg.de>
 * @author      Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
 */

#ifndef PERIPH_CONF_H
#define PERIPH_CONF_H

#include "periph_cpu.h"
#include "cfg_timer_tim2.h"

#ifdef __cplusplus
extern "C" {
#endif


/**
 * @name    xtimer configuration
 * @{
 */
#define XTIMER_WIDTH        (16)
#define XTIMER_BACKOFF      (50)
#define XTIMER_ISR_BACKOFF  (40)
/** @} */

/**
 * @name Clock system configuration
 * @{
 **/
#define CLOCK_HSI           (16000000U)             /* frequency of internal oscillator */
#define CLOCK_CORECLOCK     (32000000U)             /* targeted core clock frequency */
/*
 * 0: no external low speed crystal available,
 * 1: external crystal available (always 32.768kHz)
 */
#ifndef CLOCK_LSE
#define CLOCK_LSE           (1)
#endif
/* configuration of PLL prescaler and multiply values */
/* CORECLOCK := HSI / CLOCK_PLL_DIV * CLOCK_PLL_MUL */
#define CLOCK_PLL_DIV       RCC_CFGR_PLLDIV2
#define CLOCK_PLL_MUL       RCC_CFGR_PLLMUL4
/* configuration of peripheral bus clock prescalers */
#define CLOCK_AHB_DIV       RCC_CFGR_HPRE_DIV1      /* AHB clock -> 32MHz */
#define CLOCK_APB2_DIV      RCC_CFGR_PPRE2_DIV1     /* APB2 clock -> 32MHz */
#define CLOCK_APB1_DIV      RCC_CFGR_PPRE1_DIV1     /* APB1 clock -> 32MHz */
/* configuration of flash access cycles */
#define CLOCK_FLASH_LATENCY FLASH_ACR_LATENCY

/* bus clocks for simplified peripheral initialization, UPDATE MANUALLY! */
#define CLOCK_AHB           (CLOCK_CORECLOCK / 1)
#define CLOCK_APB2          (CLOCK_CORECLOCK / 1)
#define CLOCK_APB1          (CLOCK_CORECLOCK / 1)
/** @} */

/**
 * @name   UART configuration
 * @{
 */
static const uart_conf_t uart_config[] = {
    {
        .dev      = USART1,
        .rcc_mask = RCC_APB2ENR_USART1EN,
        .rx_pin   = GPIO_PIN(PORT_A, 10),
        .tx_pin   = GPIO_PIN(PORT_A, 9),
        .rx_af    = GPIO_AF7,
        .tx_af    = GPIO_AF7,
        .bus      = APB2,
        .irqn     = USART1_IRQn
    },
    {
        .dev      = USART2,
        .rcc_mask = RCC_APB1ENR_USART2EN,
        .rx_pin   = GPIO_PIN(PORT_A, 3),
        .tx_pin   = GPIO_PIN(PORT_A, 2),
        .rx_af    = GPIO_AF7,
        .tx_af    = GPIO_AF7,
        .bus      = APB1,
        .irqn     = USART2_IRQn
    }
};

#define UART_0_ISR          (isr_usart1)
#define UART_1_ISR          (isr_usart2)

#define UART_NUMOF          (sizeof(uart_config) / sizeof(uart_config[0]))
/** @} */

/**
 * @name   PWM configuration
 * @{
 */
#define PWM_NUMOF           0
/** @} */

/**
 * @name   SPI configuration
 *
 * @note    The spi_divtable is auto-generated from
 *          `cpu/stm32_common/dist/spi_divtable/spi_divtable.c`
 * @{
 */
static const uint8_t spi_divtable[2][5] = {
    {       /* for APB1 @ 32000000Hz */
        7,  /* -> 125000Hz */
        5,  /* -> 500000Hz */
        4,  /* -> 1000000Hz */
        2,  /* -> 4000000Hz */
        1   /* -> 8000000Hz */
    },
    {       /* for APB2 @ 32000000Hz */
        7,  /* -> 125000Hz */
        5,  /* -> 500000Hz */
        4,  /* -> 1000000Hz */
        2,  /* -> 4000000Hz */
        1   /* -> 8000000Hz */
    }
};

static const spi_conf_t spi_config[] = {
    {
        .dev      = SPI1,
        .mosi_pin = GPIO_PIN(PORT_A, 7),
        .miso_pin = GPIO_PIN(PORT_A, 6),
        .sclk_pin = GPIO_PIN(PORT_A, 5),
        .cs_pin   = GPIO_PIN(PORT_B, 0),
        .af       = GPIO_AF5,
        .rccmask  = RCC_APB2ENR_SPI1EN,
        .apbbus   = APB2
    },
    {
        .dev      = SPI2,
        .mosi_pin = GPIO_PIN(PORT_B, 14),
        .miso_pin = GPIO_PIN(PORT_B, 15),
        .sclk_pin = GPIO_PIN(PORT_B, 13),
        .cs_pin   = GPIO_PIN(PORT_B, 12),
        .af       = GPIO_AF5,
        .rccmask  = RCC_APB1ENR_SPI2EN,
        .apbbus   = APB1
    }
};

#define SPI_NUMOF           (sizeof(spi_config) / sizeof(spi_config[0]))
/** @} */

/**
 * @name I2C configuration
  * @{
 */
static const i2c_conf_t i2c_config[] = {
    {
        .dev            = I2C1,
        .speed          = I2C_SPEED_NORMAL,
        .scl_pin        = GPIO_PIN(PORT_B, 8),
        .sda_pin        = GPIO_PIN(PORT_B, 9),
        .scl_af         = GPIO_AF4,
        .sda_af         = GPIO_AF4,
        .bus            = APB1,
        .rcc_mask       = RCC_APB1ENR_I2C1EN,
        .clk            = CLOCK_APB1,
        .irqn           = I2C1_EV_IRQn
    }
};

#define I2C_0_ISR           isr_i2c1_ev

#define I2C_NUMOF           (sizeof(i2c_config) / sizeof(i2c_config[0]))
/** @} */

#ifdef __cplusplus
}
#endif

#endif /* PERIPH_CONF_H */
/** @} */