RIOT/makefiles/pseudomodules.inc.mk

PSEUDOMODULES += at_urc
PSEUDOMODULES += auto_init_gnrc_rpl
PSEUDOMODULES += can_mbox
PSEUDOMODULES += can_pm
PSEUDOMODULES += can_raw
PSEUDOMODULES += ccn-lite-utils
PSEUDOMODULES += conn_can_isotp_multi
PSEUDOMODULES += cord_ep_standalone
PSEUDOMODULES += cord_epsim_standalone
PSEUDOMODULES += core_%
PSEUDOMODULES += cortexm_fpu
PSEUDOMODULES += ecc_%
PSEUDOMODULES += emb6_router
PSEUDOMODULES += event_%
PSEUDOMODULES += gnrc_ipv6_default
PSEUDOMODULES += gnrc_ipv6_router
PSEUDOMODULES += gnrc_ipv6_router_default
PSEUDOMODULES += gnrc_ipv6_nib_6lbr
PSEUDOMODULES += gnrc_ipv6_nib_6ln
PSEUDOMODULES += gnrc_ipv6_nib_6lr
PSEUDOMODULES += gnrc_ipv6_nib_dns
PSEUDOMODULES += gnrc_ipv6_nib_router
PSEUDOMODULES += gnrc_netdev_default
PSEUDOMODULES += gnrc_neterr
PSEUDOMODULES += gnrc_netapi_callbacks
PSEUDOMODULES += gnrc_netapi_mbox
PSEUDOMODULES += gnrc_pktbuf_cmd
PSEUDOMODULES += gnrc_netif_dedup
PSEUDOMODULES += gnrc_sixloenc
PSEUDOMODULES += gnrc_sixlowpan_border_router_default
PSEUDOMODULES += gnrc_sixlowpan_default
PSEUDOMODULES += gnrc_sixlowpan_iphc_nhc
PSEUDOMODULES += gnrc_sixlowpan_nd_border_router
PSEUDOMODULES += gnrc_sixlowpan_router
PSEUDOMODULES += gnrc_sixlowpan_router_default
PSEUDOMODULES += gnrc_sock_check_reuse
PSEUDOMODULES += gnrc_txtsnd
PSEUDOMODULES += l2filter_blacklist
PSEUDOMODULES += l2filter_whitelist
PSEUDOMODULES += lis2dh12_spi
PSEUDOMODULES += log
PSEUDOMODULES += log_printfnoformat
PSEUDOMODULES += lora
PSEUDOMODULES += mpu_stack_guard
PSEUDOMODULES += nanocoap_%
PSEUDOMODULES += netdev_default
PSEUDOMODULES += netif
PSEUDOMODULES += netstats
PSEUDOMODULES += netstats_l2
PSEUDOMODULES += netstats_ipv6
PSEUDOMODULES += netstats_rpl
PSEUDOMODULES += nimble
PSEUDOMODULES += newlib
PSEUDOMODULES += newlib_gnu_source
PSEUDOMODULES += newlib_nano
PSEUDOMODULES += openthread
PSEUDOMODULES += pktqueue
PSEUDOMODULES += printf_float
PSEUDOMODULES += prng
PSEUDOMODULES += prng_%
PSEUDOMODULES += riotboot_%
PSEUDOMODULES += saul_adc
PSEUDOMODULES += saul_default
PSEUDOMODULES += saul_gpio
PSEUDOMODULES += saul_nrf_temperature
PSEUDOMODULES += schedstatistics
PSEUDOMODULES += sock
PSEUDOMODULES += sock_ip
PSEUDOMODULES += sock_tcp
PSEUDOMODULES += sock_udp

# print ascii representation in function od_hex_dump()
PSEUDOMODULES += od_string

# include variants of the AT86RF2xx drivers as pseudo modules
PSEUDOMODULES += at86rf23%
PSEUDOMODULES += at86rf21%

# include variants of the BMX280 drivers as pseudo modules
PSEUDOMODULES += bmp280
PSEUDOMODULES += bme280

# variants of TI ADCXX1C
PSEUDOMODULES += adc081c
PSEUDOMODULES += adc101c
PSEUDOMODULES += adc121c

# full featured version of CCS811 driver as pseudo module
PSEUDOMODULES += ccs811_full

# include variants of SX127X drivers as pseudo modules
PSEUDOMODULES += sx1272
PSEUDOMODULES += sx1276

# include variants of SHT1X drivers as pseudo modules
PSEUDOMODULES += sht10
PSEUDOMODULES += sht11
PSEUDOMODULES += sht15

# include variants of Si114x drivers as pseudo modules
PSEUDOMODULES += si1145
PSEUDOMODULES += si1146
PSEUDOMODULES += si1147

# include variants of Si70xx drivers as pseudo modules
PSEUDOMODULES += si7006
PSEUDOMODULES += si7013
PSEUDOMODULES += si7020
PSEUDOMODULES += si7021

# include variants of RN2XX3 drivers as pseudo modules
PSEUDOMODULES += rn2483
PSEUDOMODULES += rn2903

# include variants of VCNL40x0 drivers as pseudo modules
PSEUDOMODULES += vcnl4010
PSEUDOMODULES += vcnl4020
PSEUDOMODULES += vcnl4040

# add all pseudo random number generator variants as pseudomodules
PSEUDOMODULES += prng_%

# STM32 periph pseudomodules
PSEUDOMODULES += stm32_periph_%

# declare periph submodules as pseudomodules, but exclude periph_common
PSEUDOMODULES += periph_%
NO_PSEUDOMODULES += periph_common

# Submodules and auto-init code provided by Skald
PSEUDOMODULES += auto_init_skald
PSEUDOMODULES += skald_ibeacon
PSEUDOMODULES += skald_eddystone

# define optimized read function of DS18 driver as a pseudo module
PSEUDOMODULES += ds18_optimized

# By using this pseudomodule, T tables will be precalculated.
PSEUDOMODULES += crypto_aes_precalculated
# This pseudomodule causes a loop in AES to be unrolled (more flash, less CPU)
PSEUDOMODULES += crypto_aes_unroll

# Packages may also add modules to PSEUDOMODULES in their `Makefile.include`.
drivers/at: add URC registering and parsing feature 2018-06-26 19:03:10 +02:00			`PSEUDOMODULES += at_urc`
auto_init: initialize gnrc_rpl 2016-05-14 12:46:14 +02:00			`PSEUDOMODULES += auto_init_gnrc_rpl`
can: add CAN stack The CAN stack support only raw CAN at this time. It contains a device interface (drivers/include/can/candev.h) and the data link layer, build around can/device.c can/pkt.c and can/router.c. can/dll.c contains the upper level and lower level interface to send and receive CAN frames. Upper layer interface is located in include/can/raw.h 2016-11-23 19:02:02 +01:00			`PSEUDOMODULES += can_mbox`
			`PSEUDOMODULES += can_pm`
			`PSEUDOMODULES += can_raw`
pkg: ccn-lite: adapt to v2 2017-07-26 23:22:01 +02:00			`PSEUDOMODULES += ccn-lite-utils`
can: add conn_can top layer interface This module provide support for raw can and isotp socket-like user interface. 2016-11-23 19:10:34 +01:00			`PSEUDOMODULES += conn_can_isotp_multi`
net/rdcli: rename to cord_ep 2018-10-15 11:19:06 +02:00			`PSEUDOMODULES += cord_ep_standalone`
net/rdcli_simple: rename to cord_epsim 2018-10-15 10:44:32 +02:00			`PSEUDOMODULES += cord_epsim_standalone`
core: adapt to Makefile.submodule 2017-03-22 15:01:45 +01:00			`PSEUDOMODULES += core_%`
cortexm_common: enable FPU on cortex-m4f 2017-02-20 18:21:13 +01:00			`PSEUDOMODULES += cortexm_fpu`
sys/ecc: remove separate hamming256 folder 2018-07-11 13:50:07 +02:00			`PSEUDOMODULES += ecc_%`
emb6: initial import 2016-01-11 15:39:21 +01:00			`PSEUDOMODULES += emb6_router`
sys/event: initial commit of handler-based event system 2017-10-22 13:54:43 +02:00			`PSEUDOMODULES += event_%`
gnrc: make all gnrc modules sub-modules of gnrc 2015-08-17 15:41:29 +02:00			`PSEUDOMODULES += gnrc_ipv6_default`
			`PSEUDOMODULES += gnrc_ipv6_router`
			`PSEUDOMODULES += gnrc_ipv6_router_default`
gnrc_ipv6_nib: add configuration pseudo-modules 2017-06-10 22:48:44 +02:00			`PSEUDOMODULES += gnrc_ipv6_nib_6lbr`
			`PSEUDOMODULES += gnrc_ipv6_nib_6ln`
			`PSEUDOMODULES += gnrc_ipv6_nib_6lr`
gnrc_ndp: add support for building RDNSS option 2018-02-26 17:34:43 +01:00			`PSEUDOMODULES += gnrc_ipv6_nib_dns`
gnrc_ipv6_nib: add configuration pseudo-modules 2017-06-10 22:48:44 +02:00			`PSEUDOMODULES += gnrc_ipv6_nib_router`
Makefile.pseudomodules: Sort pseudomodule list 2016-03-29 19:02:45 +02:00			`PSEUDOMODULES += gnrc_netdev_default`
gnrc: initial import of an asynchroneous error reporting API 2015-07-10 17:22:35 +02:00			`PSEUDOMODULES += gnrc_neterr`
gnrc_netreg: add arbitrary callback support 2016-06-07 14:00:26 +02:00			`PSEUDOMODULES += gnrc_netapi_callbacks`
gnrc_netreg: add mbox support 2016-06-07 13:31:32 +02:00			`PSEUDOMODULES += gnrc_netapi_mbox`
shell_commands: add command for packet buffer stats I'm using something like this command for a while now for debugging GNRC. Usually, I just patch it into the application I'm using it with, but I think there is a benefit to also provide it to RIOT upstream properly. 2018-06-21 15:06:27 +02:00			`PSEUDOMODULES += gnrc_pktbuf_cmd`
gnrc_netif_ieee802154: drop duplicate broadcast packets (optionally) 2017-09-06 17:18:22 +02:00			`PSEUDOMODULES += gnrc_netif_dedup`
gnrc_sixloenc: introduce pseudo-module 2018-12-06 21:46:02 +01:00			`PSEUDOMODULES += gnrc_sixloenc`
gnrc_sixlowpan_nd_border_router: initial import 2015-08-31 00:23:27 +02:00			`PSEUDOMODULES += gnrc_sixlowpan_border_router_default`
Makefile.pseudomodules: Sort pseudomodule list 2016-03-29 19:02:45 +02:00			`PSEUDOMODULES += gnrc_sixlowpan_default`
			`PSEUDOMODULES += gnrc_sixlowpan_iphc_nhc`
gnrc_sixlowpan_nd_border_router: initial import 2015-08-31 00:23:27 +02:00			`PSEUDOMODULES += gnrc_sixlowpan_nd_border_router`
gnrc_sixlowpan_nd_router: initial import 2015-08-31 00:23:11 +02:00			`PSEUDOMODULES += gnrc_sixlowpan_router`
			`PSEUDOMODULES += gnrc_sixlowpan_router_default`
gnrc_sock_udp: provide port for sock_udp 2016-06-09 11:08:53 +02:00			`PSEUDOMODULES += gnrc_sock_check_reuse`
shell: introduce txtsnd pseudomodule This commit allows to enable/disable the txtsnd shell command. The command is used to send strings over L2 in GNRC. Until now the command was automatically enabled if GNRC and shell_commands were present, which may lead to confusion if no L2 packet handler is registered. 2017-01-17 16:17:44 +01:00			`PSEUDOMODULES += gnrc_txtsnd`
net: added link layer address filter module 2017-05-16 16:24:48 +02:00			`PSEUDOMODULES += l2filter_blacklist`
			`PSEUDOMODULES += l2filter_whitelist`
drivers: add support for STM lis2dh12 accelerometer 2018-01-12 23:24:43 +01:00			`PSEUDOMODULES += lis2dh12_spi`
core: log: introduce logging API 2015-02-25 16:31:03 +01:00			`PSEUDOMODULES += log`
			`PSEUDOMODULES += log_printfnoformat`
makefiles: add lora pseudomodule 2017-12-09 22:12:23 +01:00			`PSEUDOMODULES += lora`
add mpu_stack_guard pseudomodule (just Cortex-M for now) triggers an exception during stack overflow, but at a cost of 32-63 bytes of RAM per thread. 2016-10-24 18:40:44 +02:00			`PSEUDOMODULES += mpu_stack_guard`
sys/net/nanocoap: use submodules 2017-11-29 14:06:28 +01:00			`PSEUDOMODULES += nanocoap_%`
make: introduce netif_default pseudomodule Additionally the dependencies for GNRC specific modules are centralized in Makefile.dep. 2016-03-22 16:41:51 +01:00			`PSEUDOMODULES += netdev_default`
Makefile.pseudomodules: Sort pseudomodule list 2016-03-29 19:02:45 +02:00			`PSEUDOMODULES += netif`
netstats: initial import of IPv6 netstats 2016-02-14 14:49:03 +01:00			`PSEUDOMODULES += netstats`
make: add netstats pseudomodules 2016-02-12 15:03:30 +01:00			`PSEUDOMODULES += netstats_l2`
netstats: initial import of IPv6 netstats 2016-02-14 14:49:03 +01:00			`PSEUDOMODULES += netstats_ipv6`
gnrc_rpl: netstats_rpl: introduce statistics 2016-06-01 14:04:28 +02:00			`PSEUDOMODULES += netstats_rpl`
pkg/nimble: bump version to current master 2018-10-19 12:20:19 +02:00			`PSEUDOMODULES += nimble`
gnrc: make all gnrc modules sub-modules of gnrc 2015-08-17 15:41:29 +02:00			`PSEUDOMODULES += newlib`
newlib: use RIOT dependency system for _GNU_SOURCE instead 2017-10-23 15:49:10 +02:00			`PSEUDOMODULES += newlib_gnu_source`
newlib: Introduce newlib_nano pseudomodule 2016-03-21 07:36:02 +01:00			`PSEUDOMODULES += newlib_nano`
pkg/openthread: add OpenThread core 2017-05-19 01:02:19 +02:00			`PSEUDOMODULES += openthread`
gnrc: make all gnrc modules sub-modules of gnrc 2015-08-17 15:41:29 +02:00			`PSEUDOMODULES += pktqueue`
Makefile.pseudomodules: Sort pseudomodule list 2016-03-29 19:02:45 +02:00			`PSEUDOMODULES += printf_float`
sys: random: make use of submodules in Makefile 2017-08-30 23:49:30 +02:00			`PSEUDOMODULES += prng`
			`PSEUDOMODULES += prng_%`
sys: add riotboot_hdr submodule riotboot_hdr enables to partition the internal flash memory into "slots", each one with a header providing information about the partition. The concept for now is limited to firmware partitions, which are recognised by the riotboot bootloader. In the future the concept might be extended to represent other content. Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de> 2018-10-09 15:28:25 +02:00			`PSEUDOMODULES += riotboot_%`
sys/saul: Add analog inputs to SAUL via periph/adc 2016-02-18 06:22:07 +01:00			`PSEUDOMODULES += saul_adc`
drivers: added S(ensor) A(ctuator) U(ber) L(ayer) 2015-11-18 16:07:02 +01:00			`PSEUDOMODULES += saul_default`
			`PSEUDOMODULES += saul_gpio`
sys/auto_init: add support for periph_temperature 2019-01-13 15:04:09 +01:00			`PSEUDOMODULES += saul_nrf_temperature`
Makefile.pseudomodules: Sort pseudomodule list 2016-03-29 19:02:45 +02:00			`PSEUDOMODULES += schedstatistics`
gnrc_sock_udp: provide port for sock_udp 2016-06-09 11:08:53 +02:00			`PSEUDOMODULES += sock`
			`PSEUDOMODULES += sock_ip`
			`PSEUDOMODULES += sock_tcp`
			`PSEUDOMODULES += sock_udp`
drivers: new driver for at86rf2xx family radios 2015-04-23 18:36:55 +02:00
sys/od: add ASCII representation to memory dump 2017-08-24 18:25:58 +02:00			`# print ascii representation in function od_hex_dump()`
			`PSEUDOMODULES += od_string`

drivers: new driver for at86rf2xx family radios 2015-04-23 18:36:55 +02:00			`# include variants of the AT86RF2xx drivers as pseudo modules`
at86rf2xx: rename remaining files and variables 2015-08-11 23:52:02 +02:00			`PSEUDOMODULES += at86rf23%`
			`PSEUDOMODULES += at86rf21%`
sys: random: add simple LCG PRNGs 2015-10-12 16:05:17 +02:00
drivers/bmx280: factorize bme280 and bmp280 implementation 2017-02-27 16:11:38 +01:00			`# include variants of the BMX280 drivers as pseudo modules`
			`PSEUDOMODULES += bmp280`
			`PSEUDOMODULES += bme280`

drivers/adcxx1c: use pseudomodules for device variants 2017-06-20 10:11:27 +02:00			`# variants of TI ADCXX1C`
			`PSEUDOMODULES += adc081c`
			`PSEUDOMODULES += adc101c`
			`PSEUDOMODULES += adc121c`

drivers: add driver for CCS811 gas sensor 2018-09-28 23:48:47 +02:00			`# full featured version of CCS811 driver as pseudo module`
			`PSEUDOMODULES += ccs811_full`

drivers: initial implementation of sx127x radio (LoRa mode only) 2017-06-30 19:00:27 +02:00			`# include variants of SX127X drivers as pseudo modules`
			`PSEUDOMODULES += sx1272`
			`PSEUDOMODULES += sx1276`

drivers: Renamed module sht11 to sht1x The sensor family SHT10, SHT11 and SHT15 only differ in their accuracy (as in calibration, not as in resolution). Thus, the same driver can be used for all. The new driver name better reflects this fact. 2018-06-13 08:26:30 +02:00			`# include variants of SHT1X drivers as pseudo modules`
			`PSEUDOMODULES += sht10`
			`PSEUDOMODULES += sht11`
			`PSEUDOMODULES += sht15`

drivers/si114x: initial basic support 2017-03-23 14:11:44 +01:00			`# include variants of Si114x drivers as pseudo modules`
			`PSEUDOMODULES += si1145`
			`PSEUDOMODULES += si1146`
			`PSEUDOMODULES += si1147`

drivers/si70xx: cleanup and use pseudomodules 2017-07-03 00:00:47 +02:00			`# include variants of Si70xx drivers as pseudo modules`
			`PSEUDOMODULES += si7006`
			`PSEUDOMODULES += si7013`
			`PSEUDOMODULES += si7020`
			`PSEUDOMODULES += si7021`

drivers: add rn2xx3 LoRa module driver 2017-09-11 14:55:42 +02:00			`# include variants of RN2XX3 drivers as pseudo modules`
			`PSEUDOMODULES += rn2483`
			`PSEUDOMODULES += rn2903`

makefiles/pseudomodules: define vcnl40x0 sensor types 2018-09-28 13:04:26 +02:00			`# include variants of VCNL40x0 drivers as pseudo modules`
			`PSEUDOMODULES += vcnl4010`
			`PSEUDOMODULES += vcnl4020`
			`PSEUDOMODULES += vcnl4040`

sys: random: add simple LCG PRNGs 2015-10-12 16:05:17 +02:00			`# add all pseudo random number generator variants as pseudomodules`
			`PSEUDOMODULES += prng_%`
cpu/stm32_common: use pseudomodule for UART HW FC 2017-10-10 14:09:05 +02:00
			`# STM32 periph pseudomodules`
			`PSEUDOMODULES += stm32_periph_%`
make: add Makefile.periph 2017-03-22 15:19:59 +01:00
			`# declare periph submodules as pseudomodules, but exclude periph_common`
			`PSEUDOMODULES += periph_%`
			`NO_PSEUDOMODULES += periph_common`
sys/net: added Skald Skald is a very small and simple, TX-only BLE stack that supports sending advertisements only. It is useful for building all kinds of BLE beacons with very minimal memory footprints. 2018-04-05 11:10:40 +02:00
			`# Submodules and auto-init code provided by Skald`
			`PSEUDOMODULES += auto_init_skald`
			`PSEUDOMODULES += skald_ibeacon`
			`PSEUDOMODULES += skald_eddystone`
pseudomodules: allow defining them in pkg/PKG/Makefile.include Officially allow packages to define pseudomodules in their Makefile.include as done in the libcose package. 2018-04-23 15:23:18 +02:00
drivers/ds18: Add Maxim Integrated ds18 driver tests/driver_ds18: Add test application for DS18B20 sensor. tests/driver_ds18: Add whitelist of boards 2017-01-26 21:18:55 +01:00			`# define optimized read function of DS18 driver as a pseudo module`
			`PSEUDOMODULES += ds18_optimized`

sys/crypto: configure AES via pseudomodules. USEMODULE += crypto_aes_precalculated enables the precalculated T tables (the old code). USEMODULE += crypto_aes_unroll causes loops to be unrolled. 2018-10-16 18:12:39 +02:00			`# By using this pseudomodule, T tables will be precalculated.`
			`PSEUDOMODULES += crypto_aes_precalculated`
			`# This pseudomodule causes a loop in AES to be unrolled (more flash, less CPU)`
			`PSEUDOMODULES += crypto_aes_unroll`

pseudomodules: allow defining them in pkg/PKG/Makefile.include Officially allow packages to define pseudomodules in their Makefile.include as done in the libcose package. 2018-04-23 15:23:18 +02:00			# Packages may also add modules to PSEUDOMODULES in their `Makefile.include`.