RIOT/cpu/sam0_common/Makefile.features

CPU_FAM := $(shell echo $(CPU_MODEL) | cut -c -6)

FEATURES_PROVIDED += periph_cpuid
FEATURES_PROVIDED += periph_dma
FEATURES_PROVIDED += periph_flashpage
FEATURES_PROVIDED += periph_flashpage_raw
FEATURES_PROVIDED += periph_flashpage_rwee
FEATURES_PROVIDED += periph_gpio periph_gpio_irq
FEATURES_PROVIDED += periph_i2c_reconfigure
FEATURES_PROVIDED += periph_spi_reconfigure
FEATURES_PROVIDED += periph_timer_periodic # implements timer_set_periodic()
FEATURES_PROVIDED += periph_uart_modecfg
FEATURES_PROVIDED += periph_uart_nonblocking
FEATURES_PROVIDED += periph_uart_reconfigure
FEATURES_PROVIDED += periph_wdt periph_wdt_cb periph_wdt_warning_period

FEATURES_CONFLICT += periph_rtc:periph_rtt
FEATURES_CONFLICT_MSG += "The RTC and RTT map to the same hardware peripheral."

include $(RIOTCPU)/cortexm_common/Makefile.features

# Add sam0 configurations after including cortexm_common so sam0 takes precendence
# This configuration enables modules that are only available when using Kconfig
# module modelling
ifeq (1, $(TEST_KCONFIG))
  KCONFIG_ADD_CONFIG += $(RIOTCPU)/sam0_common/sam0_common.config
endif
cpu/sam0_common: define CPU_FAM based on CPU_MODEL 2020-08-24 15:02:33 +02:00			`CPU_FAM := $(shell echo $(CPU_MODEL) \| cut -c -6)`

cpu: sam0: reorganize Makefile.features 2017-10-28 17:50:22 +02:00			`FEATURES_PROVIDED += periph_cpuid`
cpu/samd5x: Add DMA peripheral to init 2020-06-11 11:05:51 +02:00			`FEATURES_PROVIDED += periph_dma`
cpu: sam0: reorganize Makefile.features 2017-10-28 17:50:22 +02:00			`FEATURES_PROVIDED += periph_flashpage`
cpu/sam0_common/Makefile.features: add periph_flash_raw 2017-11-16 17:03:05 +01:00			`FEATURES_PROVIDED += periph_flashpage_raw`
sam0 flashpage RWWEE flash support 2019-01-27 11:29:35 +01:00			`FEATURES_PROVIDED += periph_flashpage_rwee`
cpu/sam0_common: provide gpio/gpio_irq feature at cpu level 2018-11-20 08:35:31 +01:00			`FEATURES_PROVIDED += periph_gpio periph_gpio_irq`
cpu/sam0_common: i2c: implement the periph_i2c_reconfigure feature This adds sam0 implementations for - i2c_init_pins() - i2c_deinit_pins() - i2c_pin_sda() - i2c_pin_scl() 2020-02-19 19:42:22 +01:00			`FEATURES_PROVIDED += periph_i2c_reconfigure`
cpu/sam0_common: spi: implement the periph_spi_reconfigure feature 2020-03-13 17:33:43 +01:00			`FEATURES_PROVIDED += periph_spi_reconfigure`
cpu/sam0_common: Move periph_timer_periodic feature to Makefile.features 2020-05-29 11:13:59 +02:00			`FEATURES_PROVIDED += periph_timer_periodic # implements timer_set_periodic()`
sam0_common: add uart modecfg 2019-06-17 18:42:26 +02:00			`FEATURES_PROVIDED += periph_uart_modecfg`
cpu/sam0_common/periph/uart: implement buffered write Implement interrupt based uart_write() using a tsrb for the TX buffer. To enable it, add USEMODULE += periph_uart_nonblocking to your Makefile. 2019-08-20 20:52:07 +02:00			`FEATURES_PROVIDED += periph_uart_nonblocking`
cpu/sam0_common: uart: implement the periph_uart_reconfigure feature 2020-03-13 18:05:27 +01:00			`FEATURES_PROVIDED += periph_uart_reconfigure`
drivers/wdt: Add feature to indicate a configurable warning period This adds the feature `periph_wdt_warning_period` that indicates that a platform WDT driver implementation supports a configurable CONFIG_WDT_WARNING_PERIOD. 2020-06-02 12:54:25 +02:00			`FEATURES_PROVIDED += periph_wdt periph_wdt_cb periph_wdt_warning_period`
cpu: sam0: reorganize Makefile.features 2017-10-28 17:50:22 +02:00
cpu/sam0_common: merge RTC & RTT implementation The RTC and RTT share the same peripheral, so they can also share the same code. This is needed to integrate the Tamper Detection into common RTC/RTT code. 2020-06-11 17:49:31 +02:00			`FEATURES_CONFLICT += periph_rtc:periph_rtt`
			`FEATURES_CONFLICT_MSG += "The RTC and RTT map to the same hardware peripheral."`

makefiles/kconfig: always allow to use KCONFIG_ADD_CONFIG 2020-10-13 09:42:22 +02:00			`include $(RIOTCPU)/cortexm_common/Makefile.features`
cpu/cortexm_common: add default Kconfig configuration 2020-07-27 18:18:40 +02:00
makefiles/kconfig: always allow to use KCONFIG_ADD_CONFIG 2020-10-13 09:42:22 +02:00			`# Add sam0 configurations after including cortexm_common so sam0 takes precendence`
			`# This configuration enables modules that are only available when using Kconfig`
			`# module modelling`
			`ifeq (1, $(TEST_KCONFIG))`
			`KCONFIG_ADD_CONFIG += $(RIOTCPU)/sam0_common/sam0_common.config`
			`endif`