RIOT/boards/common/nucleo32/Kconfig

# Copyright (c) 2020 Inria
#
# This file is subject to the terms and conditions of the GNU Lesser
# General Public License v2.1. See the file LICENSE in the top level
# directory for more details.
#

config BOARD_COMMON_NUCLEO32
    bool
    select HAS_ARDUINO_ANALOG
    select HAS_ARDUINO_PINS
    select HAS_ARDUINO_SHIELD_NANO

    # Clock configuration
    select BOARD_HAS_LSE if (CPU_FAM_L0 || CPU_FAM_L4) && !BOARD_NUCLEO_L011K4

config MODULE_PERIPH_INIT_LED0
    default n if MODULE_PERIPH_SPI

source "$(RIOTBOARD)/common/nucleo/Kconfig"
source "$(RIOTBOARD)/common/stm32/Kconfig"
boards/common/nucleo: model common features in Kconfig 2020-07-15 11:52:40 +02:00			`# Copyright (c) 2020 Inria`
			`#`
			`# This file is subject to the terms and conditions of the GNU Lesser`
			`# General Public License v2.1. See the file LICENSE in the top level`
			`# directory for more details.`
			`#`

			`config BOARD_COMMON_NUCLEO32`
			`bool`
boards,sys/arduino: major clean up - Rename all `arduino_pinmap.h` to `arduino_iomap.h` - An empty `arduino_pinmap.h` that just includes `arduino_iomap.h` is provided for backward compatibility - Move all info from `arduino_board.h` into the new file as trivial macros, so that they can also be used outside of sketches - The new name reflects the fact not just pin mappings, but also other I/O features such as PWMs are mapped - Drop all `arduino_board.h` - `arduino_board.h` and `arduino_iomap.h` now provide the exact same information, just in a different format - a generic `arduino_board.h` is provided instead that just uses the info in `arduinio_iomap.h` and provides them in the format the code in `sys/arduino` expects it - Add fine grained features to indicate for mappings - availability of mappings for analog pins, DAC pins, PWM pins, UART devices, SPI/I2C buses to the corresponding RIOT identification can now be expressed: - `arduino_pins`: `ARDUINO_PIN_0` etc. are available - `arduino_analog`: `ARDUINO_A0` etc. are available - `arduino_pwm`: `ARDUINO_PIN_13_PWM_DEV` etc. are available - `arduino_dac`: `ARDUINO_DAC0` etc. are available - `arduino_uart`: `ARDUINO_UART_D0D1` or similar are available - `arduino_spi`: `ARDUINO_SPI_ISP` or similar are available - `arduino_i2c`: `ARDUINO_I2C_UNO` or similar are available - mechanical/electrical compatibility with specific form factors can now be expressed as features: - `aruino_shield_nano`: Arduino NANO compatible headers - `aruino_shield_uno`: Arduino UNO compatible headers - `aruino_shield_mega`: Arduino MEGA compatible headers - `aruino_shield_isp`: ISP header is available This provides the groundwork to implement shield support as modules that can rely on the I/O mappings, rather than having to provide a configuration per board. 2023-06-23 15:42:08 +02:00			`select HAS_ARDUINO_ANALOG`
			`select HAS_ARDUINO_PINS`
			`select HAS_ARDUINO_SHIELD_NANO`
boards/stm32gx: move Kconfig clock config to cpu 2020-10-23 15:38:54 +02:00
boards/nucleo-*: put Kconfig HSE/LSE clock config in common 2020-12-15 12:23:41 +01:00			`# Clock configuration`
			`select BOARD_HAS_LSE if (CPU_FAM_L0 \|\| CPU_FAM_L4) && !BOARD_NUCLEO_L011K4`

boards: drop LED init This is handled by periph_init_leds now 2022-01-28 13:28:20 +01:00			`config MODULE_PERIPH_INIT_LED0`
			`default n if MODULE_PERIPH_SPI`

cpu/stm32: Add Kconfig dependency modeling 2021-05-19 17:41:00 +02:00			`source "$(RIOTBOARD)/common/nucleo/Kconfig"`
boards/stm32gx: move Kconfig clock config to cpu 2020-10-23 15:38:54 +02:00			`source "$(RIOTBOARD)/common/stm32/Kconfig"`