fd38db6b38
19371: sys/usbus: check for the number of required and provided EPs in static configurations r=dylad a=gschorcht ### Contribution description This PR provides a static check at compile time whether the number of EPs required in a static configuration does not exceed the number of EPs provided by the USB device. #### Background In issue #19359 the problem was reported that `usbus_cdc_ecm` didn't work together with `stdio_cdc_acm` on some STM32 boards. The reason for some of the boards was simply that the application tried to allocate more EPs than available and simply ignored this and just didn't work. #### Solution Since `auto_init_usb` uses a static configuration with exactly one USBUS stack instance and one USB device, at least in case `auto_init` is used a static check can be carried out to make sure that the number of EPs required by the application doesn't exceed the number of EPs provided by the USB device. For this purpose, each `usbus_*` module defines the number of IN and OUT EPs required by that module. Each USB device driver defines the number of EPs provided by USB device if it differs from the default of 8 EPs. During the auto initialization the total number of required IN and OUT EPs is then compared with the number of EPs provided by the USB device using a static assert. ### Testing procedure 1. Green CI 2. Compilation of ```python USEMODULE='stdio_cdc_acm' BOARD=nucleo-f439zi make -j8 -C tests/usbus_cdc_ecm ``` should lead to compilation error ```python sys/auto_init/usb/auto_init_usb.c:81:1: error: static assertion failed: "Number of required IN endpoints exceeded" _Static_assert(USBUS_EP_IN_REQUIRED_NUMOF <= USBDEV_NUM_ENDPOINTS, ^~~~~~~~~~~~~~ Makefile.base:146: recipe for target 'tests/usbus_cdc_ecm/bin/nucleo-f439zi/auto_init_usbus/auto_init_usb.o' failed ``` while compilation of ``` USEMODULE='stdio_cdc_acm' BOARD=nucleo-f767zi make -j8 -C tests/usbus_cdc_ecm ``` should work. ### Issues/PRs references Fixes issue #19359 partially. 19382: tests/pkg_nanors: use static allocation r=benpicco a=benpicco Co-authored-by: Gunar Schorcht <gunar@schorcht.net> Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de> |
||
|---|---|---|
| .cargo | ||
| .github | ||
| .vscode | ||
| boards | ||
| bootloaders | ||
| core | ||
| cpu | ||
| dist | ||
| doc | ||
| drivers | ||
| examples | ||
| fuzzing | ||
| kconfigs | ||
| makefiles | ||
| pkg | ||
| sys | ||
| tests | ||
| .bandit | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| .murdock | ||
| .murdock.yml | ||
| bors.toml | ||
| CITATION.cff | ||
| CODE_OF_CONDUCT.md | ||
| CODEOWNERS | ||
| CODING_CONVENTIONS_C++.md | ||
| CODING_CONVENTIONS.md | ||
| CONTRIBUTING.md | ||
| doc.txt | ||
| Kconfig | ||
| LICENSE | ||
| LOSTANDFOUND.md | ||
| MAINTAINING.md | ||
| Makefile | ||
| Makefile.base | ||
| Makefile.dep | ||
| Makefile.features | ||
| Makefile.include | ||
| README.md | ||
| release-notes.txt | ||
| SECURITY.md | ||
| SUBSYSTEMS.md | ||
| uncrustify-riot.cfg | ||
| Vagrantfile | ||
The friendly Operating System for IoT!
RIOT is a real-time multi-threading operating system that supports a range of devices that are typically found in the Internet of Things (IoT): 8-bit, 16-bit and 32-bit microcontrollers.
RIOT is based on the following design principles: energy-efficiency, real-time capabilities, small memory footprint, modularity, and uniform API access, independent of the underlying hardware (this API offers partial POSIX compliance).
RIOT is developed by an international open source community which is independent of specific vendors (e.g. similarly to the Linux community). RIOT is licensed with LGPLv2.1, a copyleft license which fosters indirect business models around the free open-source software platform provided by RIOT, e.g. it is possible to link closed-source code with the LGPL code.
FEATURES
RIOT provides features including, but not limited to:
- a preemptive, tickless scheduler with priorities
- flexible memory management
- high resolution, long-term timers
- MTD abstraction layer
- File System integration
- support 200+ boards based on AVR, MSP430, ESP8266, ESP32, RISC-V, ARM7 and ARM Cortex-M
- the native port allows to run RIOT as-is on Linux and BSD. Multiple instances of RIOT running on a single machine can also be interconnected via a simple virtual Ethernet bridge or via a simulated IEEE 802.15.4 network (ZEP)
- IPv6
- 6LoWPAN (RFC4944, RFC6282, and RFC6775)
- UDP
- RPL (storing mode, P2P mode)
- CoAP
- OTA updates via SUIT
- MQTT
- USB (device mode)
- Display / Touchscreen support
- CCN-Lite
- LoRaWAN
- UWB
- Bluetooth (BLE) via NimBLE
GETTING RIOT
The most convenient way to get RIOT is to clone it via Git
$ git clone https://github.com/RIOT-OS/RIOT
this will ensure that you get all the newest features and bug fixes with the caveat of an ever changing work environment.
If you prefer things more stable, you can download the source code of one of our quarter annual releases via Github as ZIP file or tarball. You can also checkout a release in a cloned Git repository using
$ git pull --tags
$ git checkout <YYYY.MM>
For more details on our release cycle, check our documentation.
GETTING STARTED
- You want to start the RIOT? Just follow our quickstart guide or try this tutorial. For specific toolchain installation, follow instructions in the getting started page.
- The RIOT API itself can be built from the code using doxygen. The latest version of the documentation is uploaded daily to doc.riot-os.org.
FORUM
Do you have a question, want to discuss a new feature, or just want to present your latest project using RIOT? Come over to our forum and post to your hearts content.
CONTRIBUTE
To contribute something to RIOT, please refer to our contributing document.
MAILING LISTS
- RIOT commits: commits@riot-os.org
- Github notifications: notifications@riot-os.org
LICENSE
- Most of the code developed by the RIOT community is licensed under the GNU Lesser General Public License (LGPL) version 2.1 as published by the Free Software Foundation.
- Some external sources, especially files developed by SICS are published under a separate license.
All code files contain licensing information.
For more information, see the RIOT website: