RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity
faae649841
RIOT/tests/driver_xbee
History
Gerson Fernando Budke 4a9f0efb6d boards: introduce atmega328p-xplained-mini 
Add ATmega328P Xplained Mini board.  The board is an official
development kit from MCHP based on the Arduino UNO, reduced
hardware, with a xplainedmini debugger and CDC ACM serial
converter.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-03-27 14:10:19 -03:00
..
main.c tests/driver_xbee: use common netdev test 2020-03-28 18:02:09 +01:00
Makefile tests: use driver_netdev_common Makefile.netdev.mk instead of Makefile 2020-08-27 11:46:25 +02:00
Makefile.ci boards: introduce atmega328p-xplained-mini 2021-03-27 14:10:19 -03:00
README.md boards/cpu/drivers/sys: use generic stdio_ if 2018-08-22 10:54:25 +02:00

README.md

About

This is a manual test application for testing the Xbee S1 network device driver.

For running this test, you need to connect the following pins of a Xbee S1 module to your board:

  • UART RX
  • UART TX
  • VCC (3V3)
  • GND

NOTE: when you use an Arduino Xbee shield, the Xbee module is connected to the same UART as RIOTs standard out. In this case you must redefine STDIO_UART_DEV to another UART interface in the board.h and connect a UART-to-USB adapter to that UART.

Usage

For testing the Xbee driver you can use the netif shell commands that are included in this application.