mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00

History

Leandro Lanzieri 9abf3247c8 tests/driver_{g,h,i,j}*: add Kconfig configuration files This also adds these applications to the CI tests. The following drivers have been modelled: gp2y10xx grove_ledbar hd44780 hdc1000 hih6130 hmc5883l hts221 ili9341 ina2xx ina3221 io1_xplained isl29020 isl29125 itg320x jc42 my9221		2020-11-27 09:20:08 +01:00
..
app.config.test	tests/driver_{g,h,i,j}*: add Kconfig configuration files	2020-11-27 09:20:08 +01:00
main.c	tests/driver_ina3221: fix typo 'thist' -> 'this'	2020-10-02 08:17:06 +02:00
Makefile	tests/driver_ina3221: Test for INA3221	2019-11-05 12:33:06 +01:00
README.md	tests/driver_ina3221: Test for INA3221	2019-11-05 12:33:06 +01:00

README.md

About

This is a manual test application for the INA3221 current and power monitor driver.

Usage

This test application will initialize the sensor with the following parameters:

INA3221_PARAM_I2C: I2C_DEV(0)
INA3221_PARAM_ADDR: INA3221_ADDR_00
INA3221_PARAM_PIN_WRN: GPIO_UNDEF, or given WRN input pin
INA3221_PARAM_PIN_CRT: GPIO_UNDEF, or given CRT input pin
INA3221_PARAM_PIN_TC: GPIO_UNDEF, or given TC input pin
INA3221_PARAM_PIN_PV: GPIO_UNDEF, or given PV input pin
INA3221_PARAM_CONFIG: ( INA3221_ENABLE_CH1 | INA3221_ENABLE_CH2 | INA3221_ENABLE_CH3, INA3221_NUM_SAMPLES_4 | INA3221_CONV_TIME_BADC_4156US | INA3221_CONV_TIME_SADC_4156US | INA3221_MODE_CONTINUOUS_SHUNT_BUS )
INA3221_PARAM_RSHUNT_MOHM_CH1: 100
INA3221_PARAM_RSHUNT_MOHM_CH2: 100
INA3221_PARAM_RSHUNT_MOHM_CH3: 100

After initialization, the application will perform basic read/write functionality tests. If the preceding static tests succeed, the program will enter an endless loop and check if a full conversion cycle has completed. If new values for shunt voltage and bus voltage are available, current and power are calculated and each value for every channel is printed to stdio in a neat table, with available status flags.