mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
51 lines
2.2 KiB
Plaintext
51 lines
2.2 KiB
Plaintext
/**
|
|
@defgroup boards_nucleo-g071rb STM32 Nucleo-G071RB
|
|
@ingroup boards_common_nucleo64
|
|
@brief Support for the STM32 Nucleo-G071RB
|
|
|
|
## Overview
|
|
|
|
The Nucleo-G071RB is a board from ST's Nucleo family supporting a ARM
|
|
Cortex-M0+ STM32G071RB microcontroller with 36KiB of RAM and 128KiB of Flash.
|
|
|
|
## Pinout
|
|
|
|
@image html pinouts/nucleo-g070rb-and-g071rb.svg "Pinout for the Nucleo-G071RG (from STM user manual UM2324, https://www.st.com/resource/en/user_manual/um2324-stm32-nucleo64-boards-mb1360-stmicroelectronics.pdf, page 34)" width=50%
|
|
|
|
### MCU
|
|
|
|
| MCU | STM32G071RB
|
|
|:-------------|:--------------------|
|
|
| Family | ARM Cortex-M0+ |
|
|
| Vendor | ST Microelectronics |
|
|
| RAM | 36KiB |
|
|
| Flash | 128KiB |
|
|
| Frequency | up to 64 MHz |
|
|
| Timers | 14 (2x watchdog, 1 SysTick, 10x 16-bit and 1 32-bit) |
|
|
| ADCs | 1x 12 bit (up to 16 channels) |
|
|
| UARTs | 5 (four USARTs and one Low-Power UART) |
|
|
| I2Cs | 2 |
|
|
| SPIs | 2 |
|
|
| RTC | 1 |
|
|
| Datasheet | [Datasheet](https://www.st.com/resource/en/datasheet/stm32g071rb.pdf)|
|
|
| Reference Manual | [Reference Manual](https://www.st.com/resource/en/reference_manual/rm0454-stm32g0x0-advanced-armbased-32bit-mcus-stmicroelectronics.pdf)|
|
|
| Programming Manual | [Programming Manual](https://www.st.com/resource/en/programming_manual/pm0223-stm32-cortexm0-mcus-programming-manual-stmicroelectronics.pdf)|
|
|
| Board Manual | [Board Manual](https://www.st.com/resource/en/user_manual/um2324-stm32-nucleo64-boards-mb1360-stmicroelectronics.pdf)|
|
|
|
|
## Flashing the Board Using ST-LINK Removable Media
|
|
|
|
On-board ST-LINK programmer provides via composite USB device removable media.
|
|
Copying the HEX file causes reprogramming of the board. This task
|
|
could be performed manually; however, the cpy2remed (copy to removable
|
|
media) PROGRAMMER script does this automatically. To program board in
|
|
this manner, use the command:
|
|
|
|
```
|
|
make BOARD=nucleo-g071rb PROGRAMMER=cpy2remed flash
|
|
```
|
|
|
|
@note This PROGRAMMER was tested using ST-LINK firmware 2.37.26. Firmware updates
|
|
could be found on [this STM webpage](https://www.st.com/en/development-tools/stsw-link007.html).
|
|
|
|
*/
|