mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
60 lines
2.5 KiB
Plaintext
60 lines
2.5 KiB
Plaintext
/**
|
|
@defgroup boards_nucleo-f722ze STM32 Nucleo-F722ZE
|
|
@ingroup boards_common_nucleo144
|
|
@brief Support for the STM32 Nucleo-F722ZE
|
|
|
|
## Overview
|
|
|
|
The Nucleo-F722ZE is a board from ST's Nucleo family supporting ARM Cortex-M7
|
|
STM32F722ZE microcontroller with 256KiB of RAM and 512KiB of Flash.
|
|
|
|
## Pinout
|
|
|
|
@image html pinouts/nucleo-f446ze-and-f722ze.svg "Pinout for the Nucleo-F722ZE (from STM user manual, UM1974, http://www.st.com/resource/en/user_manual/dm00244518.pdf, page 35)" width=50%
|
|
|
|
### MCU
|
|
|
|
| MCU | STM32F722ZE
|
|
|:-------------|:--------------------|
|
|
| Family | ARM Cortex-M7 |
|
|
| Vendor | ST Microelectronics |
|
|
| RAM | 256KiB |
|
|
| Flash | 512KiB |
|
|
| Frequency | up to 216 MHz |
|
|
| FPU | yes |
|
|
| Timers | 18 (2x watchdog, 1 SysTick, 2x 32-bit, 13x 16-bit) |
|
|
| ADCs | 3x 12 bit (up to 24 channels) |
|
|
| UARTs | 4 |
|
|
| I2Cs | 3 |
|
|
| SPIs | 5 |
|
|
| CAN | 1 |
|
|
| RTC | 1 |
|
|
| Datasheet | [Datasheet](https://www.st.com/resource/en/datasheet/stm32f722ic.pdf)|
|
|
| Reference Manual | [Reference Manual](https://www.st.com/resource/en/reference_manual/rm0431-stm32f72xxx-and-stm32f73xxx-advanced-armbased-32bit-mcus-stmicroelectronics.pdf)|
|
|
| Programming Manual | [Programming Manual](https://www.st.com/resource/en/programming_manual/pm0253-stm32f7-series-and-stm32h7-series-cortexm7-processor-programming-manual-stmicroelectronics.pdf)|
|
|
| Board Manual | [Board Manual](https://www.st.com/resource/en/user_manual/dm00244518-stm32-nucleo-144-boards-stmicroelectronics.pdf)|
|
|
|
|
|
|
## Flashing the Board Using ST-LINK Removable Media
|
|
|
|
On-board ST-LINK programmer provides via composite USB device removable media.
|
|
Copying the HEX file causes reprogramming of the board. This task
|
|
could be performed manually; however, the cpy2remed (copy to removable
|
|
media) PROGRAMMER script does this automatically. To program board in
|
|
this manner, use the command:
|
|
```
|
|
make BOARD=nucleo-f722ze PROGRAMMER=cpy2remed flash
|
|
```
|
|
@note This PROGRAMMER was tested using ST-LINK firmware 2.37.26. Firmware updates
|
|
can be found on [this STM webpage](https://www.st.com/en/development-tools/stsw-link007.html).
|
|
|
|
## Accessing RIOT shell
|
|
|
|
Default RIOT shell access utilize VCP (Virtual COM Port) via USB interface,
|
|
provided by integrated ST-LINK programmer. ST-LINK is connected to the
|
|
microcontroller USART3.
|
|
|
|
The default baud rate is 115200.
|
|
|
|
*/
|