mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
53 lines
2.2 KiB
Plaintext
53 lines
2.2 KiB
Plaintext
/**
|
|
@defgroup boards_nucleo-c031c6 STM32 Nucleo-C031C6
|
|
@ingroup boards_common_nucleo64
|
|
@brief Support for the STM32 Nucleo-C031C6
|
|
|
|
## Overview
|
|
|
|
The Nucleo-C031C6 is a board from ST's Nucleo family supporting a ARM
|
|
Cortex-M0+ STM32C031C6 microcontroller with 12KiB of RAM and 32KiB of Flash.
|
|
|
|
## Pinout
|
|
|
|
@image html pinouts/nucleo-c031c6.svg "Pinout for the Nucleo-C031C6 (from STM user manual UM2953, https://www.st.com/resource/en/user_manual/um2953-stm32-nucleo64-board-mb1717-stmicroelectronics.pdf, page 19)" width=50%
|
|
|
|
### MCU
|
|
|
|
| MCU | STM32C031C6 |
|
|
|:---------- |:------------------- |
|
|
| Family | ARM Cortex-M0+ |
|
|
| Vendor | ST Microelectronics |
|
|
| RAM | 12KiB |
|
|
| Flash | 32KiB |
|
|
| Frequency | up to 48MHz |
|
|
| FPU | no |
|
|
| Timers | 12 (2x watchdog, 1 SysTick, 5x 16-bit) |
|
|
| ADCs | 1x 12-bit (up to 19 channels) |
|
|
| UARTs | 2 |
|
|
| SPIs | 1 |
|
|
| I2Cs | 1 |
|
|
| RTC | 1 |
|
|
| Vcc | 2.0V - 3.6V |
|
|
| Datasheet | [Datasheet](https://www.st.com/resource/en/datasheet/stm32c031c6.pdf) |
|
|
| Reference Manual | [Reference Manual](https://www.st.com/resource/en/reference_manual/rm0490-stm32c0x1-advanced-armbased-32bit-mcus-stmicroelectronics.pdf) |
|
|
| Programming Manual | [Programming Manual](https://www.st.com/resource/en/programming_manual/pm0223-stm32-cortexm0-mcus-programming-manual-stmicroelectronics.pdf) |
|
|
| Board Manual | [Board Manual](https://www.st.com/resource/en/user_manual/um2953-stm32-nucleo64-board-mb1717-stmicroelectronics.pdf) |
|
|
|
|
## Flashing the Board Using ST-LINK Removable Media
|
|
|
|
On-board ST-LINK programmer provides via composite USB device removable media.
|
|
Copying the HEX file causes reprogramming of the board. This task
|
|
could be performed manually; however, the cpy2remed (copy to removable
|
|
media) PROGRAMMER script does this automatically. To program board in
|
|
this manner, use the command:
|
|
|
|
```
|
|
make BOARD=nucleo-c031c6 PROGRAMMER=cpy2remed flash
|
|
```
|
|
|
|
@note This PROGRAMMER was tested using ST-LINK firmware 2.37.26. Firmware updates
|
|
could be found on [this STM webpage](https://www.st.com/en/development-tools/stsw-link007.html).
|
|
|
|
*/
|