mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
35 lines
1.2 KiB
Plaintext
35 lines
1.2 KiB
Plaintext
/**
|
|
@defgroup boards_nrf51dk nRF51DK Development Kit
|
|
@ingroup boards
|
|
@brief Support for the Nordic nRF51DK Development Kit
|
|
|
|
## Overview:
|
|
|
|
The nRF51 DK is a low-cost, versatile single-board development kit for
|
|
Bluetooth low energy, ANT and 2.4GHz proprietary applications using the nRF51
|
|
Series SoC.
|
|
|
|
## Flashing the Device:
|
|
|
|
The nRF51DK board is shipped with an on-board JLink debugger that doesn't work
|
|
well with UART: the shell is only working on RX but not TX.
|
|
|
|
Thus, we recommend to update the flasher ship with DAPLink as described
|
|
[here](https://armmbed.github.io/DAPLink/?board=Nordic-nRF51-DK):
|
|
1. Download and extract [this release package](https://github.com/ARMmbed/DAPLink/releases/download/v0251/0251_release_package_9295000c.zip)
|
|
2. While holding down the boards reset button, connect the boards USB debug
|
|
port to the computer. It should enumerate as `BOOTLOADER`
|
|
3. Using a filesystem browser, drag-n-drop the firmware
|
|
`0251_sam3u2c_mkit_dk_dongle_nrf5x_0x5000.bin` file to the
|
|
`BOOTLOADER` folder
|
|
4. Power-cycle the board, a new DAPLink mount point should appear
|
|
|
|
The programmer used to flash this board is OpenOCD.
|
|
|
|
To flash the board, use the following command:
|
|
```
|
|
$ make BOARD=nrf51dk flash
|
|
```
|
|
from any application directory.
|
|
*/
|