mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
32 lines
987 B
Plaintext
32 lines
987 B
Plaintext
/**
|
|
@defgroup boards_e104-bt5010a-tb E104-BT5010A Test Board
|
|
@ingroup boards
|
|
@brief Support for the Ebyte E104-BT5010A Test Board (nRF52810)
|
|
|
|
## General information
|
|
|
|
The E104-BT5010A Test Board is a cheap break-out board for the E104-BT5010A module.
|
|
It's based on the nRF52810 and by default comes with a Firmware that accepts AT
|
|
commands over UART, but it can be flashed with RIOT easily.
|
|
|
|
- [Module Datasheet](http://www.ebyte.com/en/downpdf.aspx?id=832)
|
|
- [Module Website](http://www.ebyte.com/en/product-view-news.aspx?id=832)
|
|
|
|
## Flashing the board
|
|
|
|
To flash the board, you have to connect a SWD programmer to the pins labeled SWDIO and
|
|
SWCLK. Also make sure to connect GND.
|
|
P0.21 is Reset.
|
|
|
|
## Accessing STDIO via UART
|
|
|
|
The STDIO is directly accessible via the USB port. On a Linux host, it's
|
|
generally mapped to `/dev/ttyUSB0`.
|
|
|
|
Use the `term` target to connect to the board serial port<br/>
|
|
```
|
|
make BOARD=e104-bt5010a-tb -C examples/hello-world term
|
|
```
|
|
|
|
*/
|