mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
81 lines
2.9 KiB
Plaintext
81 lines
2.9 KiB
Plaintext
/**
|
|
@defgroup boards_cc1350_launchpad TI CC1350 LaunchPad XL
|
|
@ingroup boards
|
|
@brief Texas Instruments SimpleLink(TM) CC1350 Wireless MCU LaunchPad(TM) Kit
|
|
|
|
## Overview
|
|
|
|
The [LAUNCHXL-CC1350](https://www.ti.com/tool/LAUNCHXL-CC1350) is a Texas
|
|
Instrument's development kit for the CC1350 SoC MCU which combines a Cortex-M3
|
|
microcontroller alonside a dedicated Cortex-M0 to control a dual-band radio.
|
|
|
|
## Hardware
|
|
|
|
|
|
|
|
| MCU | CC1350 |
|
|
|:----------------- |:--------------------- |
|
|
| Family | ARM Cortex-M3 |
|
|
| Vendor | Texas Instruments |
|
|
| RAM | 20KiB |
|
|
| Flash | 128KiB |
|
|
| Frequency | 48MHz |
|
|
| FPU | no |
|
|
| Timers | 4 |
|
|
| ADCs | 1x 12-bit (channels) |
|
|
| UARTs | 1 |
|
|
| SPIs | 2 |
|
|
| I2Cs | 1 |
|
|
| Vcc | 1.8V - 3.8V |
|
|
| Datasheet | [Datasheet](https://www.ti.com/lit/ds/swrs183b/swrs183b.pdf) |
|
|
| Reference Manual | [Reference Manual](https://www.ti.com/lit/ug/swcu117i/swcu117i.pdf) |
|
|
|
|
## Board pinout
|
|
|
|
The [CC1350 Quick Start Guide](https://www.ti.com/lit/ug/swru478b/swru478b.pdf)
|
|
provides the default pinout for the board.
|
|
|
|
## Flashing the Device
|
|
|
|
Flashing RIOT is quite straight forward. The board comes with an XDS110 on-board
|
|
debug probe that provides programming, flashing and debugging capabilities
|
|
through the USB Micro-USB connector. Once either TI Uniflash or OpenOCD are
|
|
installed just connect the board using the Micro-USB port to your computer and
|
|
type:
|
|
|
|
```
|
|
make flash BOARD=cc1350-launchpad
|
|
```
|
|
|
|
To use OpenOCD instead of uniflash we need to set the `PROGRAMMER` environment
|
|
variable, this is to enable OpenOCD instead of Uniflash.
|
|
|
|
```
|
|
export PROGRAMMER=openocd
|
|
```
|
|
|
|
Now we can just do `make flash` and `make debug`, this all using OpenOCD.
|
|
|
|
## Accessing RIOT shell
|
|
|
|
Default RIOT shell access utilize XDS110 debug probe integrated with launchpad
|
|
board. It provides virtual serials via USB interface - for connecting to RIOT
|
|
shell, use the first one (with TI drivers for Windows named
|
|
"Class Application/User UART").
|
|
|
|
If a physical connection to UART is needed, disconnect jumpers RXD and TXD
|
|
joining cc1350 microcontroller with XDS110 and connect UART to pin RXD/DIO2
|
|
|
|
The default baud rate is 115 200 - in both connection types.
|
|
|
|
@warning Launchpad cc1350 board is not 5V tolerant. Use voltage divider or logic
|
|
level shifter when connecting to 5V UART.
|
|
|
|
## More information
|
|
|
|
For detailed information about CC1350 MCUs as well as configuring, compiling
|
|
RIOT and installation of flashing tools for CC1350 boards,
|
|
see \ref cc26xx_cc13xx_riot.
|
|
|
|
*/
|