RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity
fa9a297e7c
RIOT/drivers/include/lis2dh12.h
Jan Mohr 4598602176 drivers/lis2dh12: functionality extension
2021-03-04 00:43:04 +01:00

459 lines
15 KiB
C
Raw Blame History

/*
* Copyright (C) 2018 Freie Universität Berlin
*
* This file is subject to the terms and conditions of the GNU Lesser
* General Public License v2.1. See the file LICENSE in the top level
* directory for more details.
*/
/**
* @defgroup drivers_lis2dh12 LIS2DH12 Accelerometer
* @ingroup drivers_sensors
* @ingroup drivers_saul
* @brief Driver for the STM LIS2DH12 accelerometer
*
* This device driver provides a minimal interface to LIS2DH12 devices. As of
* now, it only provides very basic access to the device. The driver configures
* the device to continuously read the acceleration data with statically
* defined scale and rate, and with a fixed 10-bit resolution. The LIS2DH12's
* FIFO is bypassed, so the driver might not be sufficient for use cases where
* the complete history of readings is of interest.
*
* Also, the current version of the driver supports only interfacing the sensor
* via SPI. The driver is however written in a way, that adding I2C interface
* support is quite simple, as all bus related functions (acquire, release,
* read, write) are cleanly separated in the code.
*
* This driver provides @ref drivers_saul capabilities.
*
* @{
* @file
* @brief Interface definition for the STM LIS2DH12 accelerometer
*
* @author Hauke Petersen <hauke.petersen@fu-berlin.de>
*/
#ifndef LIS2DH12_H
#define LIS2DH12_H
#include <stdint.h>
#include "saul.h"
#include "lis2dh12_registers.h"
#include "periph/gpio.h"
#ifdef MODULE_LIS2DH12_SPI
#include "periph/spi.h"
#else
#include "periph/i2c.h"
#endif
#ifdef __cplusplus
extern "C" {
#endif
#if defined(MODULE_LIS2DH12) || defined(DOXYGEN)
/**
* @brief Default I2C slave address for LIS2DH12 devices
*/
#define LIS2DH12_ADDR_DEFAULT (0x19)
#endif
/**
* @brief Available scale values
*/
typedef enum {
LIS2DH12_SCALE_2G = 0x00, /**< +- 2g */
LIS2DH12_SCALE_4G = 0x10, /**< +- 4g */
LIS2DH12_SCALE_8G = 0x20, /**< +- 8g */
LIS2DH12_SCALE_16G = 0x30, /**< +- 16g */
} lis2dh12_scale_t;
/**
* @brief Available sampling rates
*
*/
typedef enum {
LIS2DH12_RATE_1HZ = 0x1, /**< sample with 1Hz @ all power modes */
LIS2DH12_RATE_10HZ = 0x2, /**< sample with 10Hz @ all power modes */
LIS2DH12_RATE_25HZ = 0x3, /**< sample with 25Hz @ all power modes */
LIS2DH12_RATE_50HZ = 0x4, /**< sample with 50Hz @ all power modes */
LIS2DH12_RATE_100HZ = 0x5, /**< sample with 100Hz @ all power modes */
LIS2DH12_RATE_200HZ = 0x6, /**< sample with 200Hz @ all power modes */
LIS2DH12_RATE_400HZ = 0x7, /**< sample with 400Hz @ all power modes */
LIS2DH12_RATE_1620HZ = 0x8, /**< sample with 1620HZ @ Low Power*/
LIS2DH12_RATE_VERYHIGH = 0x9, /**< sample with 1344Hz @ High resolution or \
5376Hz @ Low Power*/
} lis2dh12_rate_t;
/**
* @brief Available power modes
*
*/
typedef enum {
LIS2DH12_POWER_DOWN = 0, /**< power down the device */
LIS2DH12_POWER_LOW = 1, /**< low power mode */
LIS2DH12_POWER_NORMAL = 2, /**< normal mode */
LIS2DH12_POWER_HIGH = 3, /**< high resolution */
} lis2dh12_powermode_t;
/**
* @brief LIS2DH12 configuration parameters
*/
typedef struct {
#if MODULE_LIS2DH12_SPI || DOXYGEN
spi_t spi; /**< SPI bus the device is connected to */
gpio_t cs; /**< connected chip select pin */
#else
i2c_t i2c; /**< I2C bus the device is connected to */
uint8_t addr; /**< device address on the I2C bus */
#endif
#if MODULE_LIS2DH12_INT || DOXYGEN
gpio_t int1_pin; /**< first interrupt pin */
gpio_t int2_pin; /**< second interrupt pin */
#endif
lis2dh12_scale_t scale; /**< sampling sensitivity used */
lis2dh12_rate_t rate; /**< sampling rate used */
lis2dh12_powermode_t powermode; /**< power mode used*/
} lis2dh12_params_t;
/**
* @brief LIS2DH12 high pass modes
*/
typedef enum {
LIS2DH12_HP_MODE_NORMAL = 0x0, /**< normal mode, reset by reading REG_REFERENCE */
LIS2DH12_HP_MODE_REFERENCE = 0x1, /**< uses the reference signal for filtering */
LIS2DH12_HP_MODE_AUTORESET = 0x3, /**< automatically resets on interrupt generation */
} lis2dh12_hp_mode_t;
/**
* @brief LIS2DH12 high pass cutoff frequency
*/
typedef enum {
LIS2DH12_HP_FREQ_DIV50 = 0, /**< cutoff freq is ODR divided by 50 */
LIS2DH12_HP_FREQ_DIV100 = 1, /**< cutoff freq is ODR divided by 100 */
LIS2DH12_HP_FREQ_DIV200 = 2, /**< cutoff freq is ODR divided by 200 */
LIS2DH12_HP_FREQ_DIV400 = 3, /**< cutoff freq is ODR divided by 400 */
} lis2dh12_hp_freq_t;
/**
* @brief LIS2DH12 high pass config values
*/
typedef struct {
lis2dh12_hp_mode_t Highpass_mode; /**< set the High pass mode */
lis2dh12_hp_freq_t Highpass_freq; /**< set the High pass cutoff frequency \
related to device rate */
bool CLICK_enable; /**< enables filter for click data */
bool INT1_enable; /**< enables filter for AOI on interrupt 1 */
bool INT2_enable; /**< enables filter for AOI on interrupt 2 */
bool DATA_OUT_enable; /**< enables filter for data output */
} lis2dh12_highpass_t;
/**
* @brief LIS2DH12 click config values
*/
typedef struct {
bool enable_DOUBLE; /**< otherwise single click for given axis are enabled */
bool enable_X_CLICK; /**< enable double pr single click for X axes */
bool enable_Y_CLICK; /**< enable double pr single click for Y axes */
bool enable_Z_CLICK; /**< enable double pr single click for Z axes */
bool noINT_latency; /**< if "0" interrupt stays high for TIME_latency setting \
if "1" interrupt stays high until CLICK_SRC is read */
uint8_t CLICK_thold:7; /**< set click threshold */
uint8_t TIME_limit:7; /**< set number of ODR cycles for time limit over threshold value */
uint8_t TIME_latency; /**< set number of ODR cycles for latency after a click */
uint8_t TIME_window; /**< set number of ODR cycles for window between clicks */
} lis2dh12_click_t;
/**
* @brief LIS2DH12 device descriptor
*/
typedef struct {
const lis2dh12_params_t *p; /**< device configuration */
uint8_t comp; /**< scale compensation factor */
} lis2dh12_t;
/**
* @brief Status and error return codes
*/
enum {
LIS2DH12_OK = 0, /**< everything was fine */
LIS2DH12_NOBUS = -1, /**< bus interface error */
LIS2DH12_NODEV = -2, /**< unable to talk to device */
LIS2DH12_NOINT = -3, /**< wrong interrupt line (has to be LIS2DH12_INT1
or LIS2DH12_INT2) */
LIS2DH12_NODATA= -4, /**< no data available */
};
#if MODULE_LIS2DH12_INT || DOXYGEN
/*
* @brief Interrupt lines
*/
enum {
LIS2DH12_INT1 = 1, /**< first interrupt line */
LIS2DH12_INT2 = 2, /**< second interrupt line */
};
/**
* @brief Parameter for interrupt configuration
*/
typedef struct {
uint8_t int_config; /**< values for configuration */
uint8_t int_threshold:7; /**< the threshold for triggering interrupt,
threshold in range 0-127 */
uint8_t int_duration:7; /**< time between two interrupts ODR section in CTRL_REG1,
duration in range 0-127 */
uint8_t int_type; /**< values for type of interrupts */
gpio_cb_t cb; /**< the callback to execute */
void *arg; /**< the callback argument */
} lis2dh12_int_params_t;
#endif /* MODULE_LIS2DH12_INT */
/**
* @brief LIS2DH12 FIFO data struct
*/
typedef struct {
int16_t X_AXIS; /**< X raw data in FIFO */
int16_t Y_AXIS; /**< Y raw data in FIFO */
int16_t Z_AXIS; /**< Z raw data in FIFO */
} lis2dh12_fifo_data_t;
/**
* @brief LIS2DH12 FIFO modes
*/
typedef enum {
LIS2DH12_FIFO_MODE_BYPASS = 0, /**< default mode, FIFO is bypassed */
LIS2DH12_FIFO_MODE_FIFOMODE, /**< normal FIFO mode, stops if FIFO is full */
LIS2DH12_FIFO_MODE_STREAM, /**< Stream mode, oldest values get overwritten */
LIS2DH12_FIFO_MODE_STREAMtoFIFO, /**< Stream mode and on interrupt jumps to FIFO mode */
} lis2dh12_fifo_mode_t;
/**
* @brief LIS2DH12 FIFO config values
*/
typedef struct {
lis2dh12_fifo_mode_t FIFO_mode; /**< set FIFO mode */
uint8_t FIFO_watermark:5; /**< set the FIFO watermark level */
bool FIFO_set_INT2; /**< sets the FIFO interrupt to INT2, otherwise INT1 */
} lis2dh12_fifo_t;
/**
* @brief Export the SAUL interface for this driver
*/
extern const saul_driver_t lis2dh12_saul_driver;
#if MODULE_LIS2DH12_INT || DOXYGEN
/**
* @brief Set the interrupt values in LIS2DH12 sensor device
*
* @param[in] dev device descriptor
* @param[in] params device interrupt configuration
* @param[in] int_line number of interrupt line (LIS2DH12_INT1 or LIS2DH12_INT2)
*
* @return LIS2DH12_OK on success
* @return LIS2DH12_NOBUS on bus errors
*/
int lis2dh12_set_int(const lis2dh12_t *dev, const lis2dh12_int_params_t *params, uint8_t int_line);
/**
* @brief Read an interrupt event on LIS2DH12 sensor device
*
* @param[in] dev device descriptor
* @param[out] data device interrupt data
* @param[in] int_line number of interrupt line (LIS2DH12_INT1 or LIS2DH12_INT2)
*
* @return LIS2DH12_OK on success
* @return LIS2DH12_NOBUS on bus errors
*/
int lis2dh12_read_int_src(const lis2dh12_t *dev, uint8_t *data, uint8_t int_line);
#endif /* MODULE_LIS2DH12_INT */
/**
* @brief Set the FIFO configuration
*
* @param[in] dev device descriptor
* @param[in] config device FIFO configuration
*
* @return LIS2DH12_OK on success
*/
int lis2dh12_set_fifo(const lis2dh12_t *dev, const lis2dh12_fifo_t *config);
/**
* @brief Restart the FIFO mode
* this sets the FIFO mode in BYPASS mode and then back to previous mode
* Note: The LIS module disables the FIFO after interrupt automatically,
* it is recommended to set the FIFO in BYPASS mode and then back to old
* FIFO mode to enable the FIFO again.
*
* @param[in] dev device descriptor
*
* @return LIS2DH12_OK on success
*/
int lis2dh12_restart_fifo(const lis2dh12_t *dev);
/**
* @brief Read the FIFO source register
*
* @param[in] dev device descriptor
* @param[out] data LIS2DH12_FIFO_SRC_REG_t content, allocate one byte
*
* @return LIS2DH12_OK on success
*/
int lis2dh12_read_fifo_src(const lis2dh12_t *dev, LIS2DH12_FIFO_SRC_REG_t *data);
/**
* @brief This function will read a given number of data from FIFO
* reads amount of data that is available in FIFO
*
* @param[in] dev device descriptor
* @param[out] fifo_data FIFO data, must have space for number of data
* @param[in] number amount of FIFO data to be read
*
* @return number of valid data read from FIFO
*/
uint8_t lis2dh12_read_fifo_data(const lis2dh12_t *dev, lis2dh12_fifo_data_t *fifo_data,
uint8_t number);
/**
* @brief Initialize the given LIS2DH12 sensor device
*
* @param[out] dev device descriptor
* @param[in] params static device configuration
*
* @return LIS2DH12_OK on success
* @return LIS2DH12_NOBUS on bus errors
* @return LIS2DH12_NODEV if no LIS2DH12 device was found on the bus
*/
int lis2dh12_init(lis2dh12_t *dev, const lis2dh12_params_t *params);
/**
* @brief Read acceleration data from the given device
*
* @param[in] dev device descriptor
* @param[out] data acceleration data in mili-g, **MUST** hold 3 values
*
* @return LIS2DH12_OK on success
* @return LIS2DH12_NOBUS on bus error
*/
int lis2dh12_read(const lis2dh12_t *dev, int16_t *data);
/**
* @brief Clear the LIS2DH12 memory, clears all sampled data
*
* @param[in] dev device descriptor
*
* @return LIS2DH12_OK on success
*/
int lis2dh12_clear_data(const lis2dh12_t *dev);
/**
* @brief Change device scale value
*
* @param[in] dev device descriptor
* @param[in] scale change to given scale value
*
* @return LIS2DH12_OK on success
*/
int lis2dh12_set_scale(lis2dh12_t *dev, lis2dh12_scale_t scale);
/**
* @brief Change device sampling rate
*
* @param[in] dev device descriptor
* @param[in] rate change to given sampling rate
*
* @return LIS2DH12_OK on success
*/
int lis2dh12_set_datarate(const lis2dh12_t *dev, lis2dh12_rate_t rate);
/**
* @brief Change device power mode
*
* @param[in] dev device descriptor
* @param[in] powermode change to given power mode
*
* @return LIS2DH12_OK on success
*/
int lis2dh12_set_powermode(const lis2dh12_t *dev, lis2dh12_powermode_t powermode);
/**
* @brief Configures the high pass filter
*
* @param[in] dev device descriptor
* @param[in] config device high pass configuration
*
* @return LIS2DH12_OK on success
*/
int lis2dh12_set_highpass(const lis2dh12_t *dev, const lis2dh12_highpass_t *config);
/**
* @brief Set the reference value to control the high-pass reference.
* In LIS2DH12_HP_MODE_REFERENCE the reference value is used to filter data
* on all axis. Subtracts reference value from acceleration.
* Note: LSB changes according to LIS2DH12_SCALE
*
* @param[in] dev device descriptor
* @param[in] reference reference value [8 Bit]
*
* @return LIS2DH12_OK on success
*/
int lis2dh12_set_reference(const lis2dh12_t *dev, uint8_t reference);
/**
* @brief Read the reference value
*
* @param[in] dev device descriptor
* @param[out] data reference value read from device
*
* @return LIS2DH12_OK on success
*/
int lis2dh12_read_reference(const lis2dh12_t *dev, uint8_t *data);
/**
* @brief Set click configuration
*
* @param[in] dev device descriptor
* @param[in] config device click configuration
*
* @return LIS2DH12_OK on success
*/
int lis2dh12_set_click(const lis2dh12_t *dev, const lis2dh12_click_t *config);
/**
* @brief Read click source register
*
* @param[in] dev device descriptor
* @param[out] data LIS2DH12_CLICK_SRC_t content, allocate one byte
*
* @return LIS2DH12_OK on success
*/
int lis2dh12_read_click_src(const lis2dh12_t *dev, LIS2DH12_CLICK_SRC_t *data);
/**
* @brief Power on the given device and resets power mode and sampling rate
* to default values in the device descriptor parameters
*
* @param[in] dev device descriptor
*
* @return LIS2DH12_OK on success
* @return LIS2DH12_NOBUS on bus error
*/
int lis2dh12_poweron(const lis2dh12_t *dev);
/**
* @brief Power off the given device
*
* @param[in] dev device descriptor
*
* @return LIS2DH12_OK on success
* @return LIS2DH12_NOBUS on bus error
*/
int lis2dh12_poweroff(const lis2dh12_t *dev);
#ifdef __cplusplus
}
#endif
#endif /* LIS2DH12_H */
/** @} */
View Git Blame Copy Permalink