mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
f7ef90d213
19074: cpu/esp8266: build the SDK bootloader from source r=benpicco a=gschorcht ### Contribution description This PR is a takeover of PR #17043, which is rebased to the current master and includes some corrections that became necessary after rebasing. **Copied from description of PR #17043:** We had four versions of pre-built bootloaders for the esp8266 with different settings of logging and color logging. These bootloaders were manually built from the SDK and shipped with RIOT-OS source code. However there are more settings that affect the bootloader build that are relevant to the app or final board that uses this bootloader. In particular, flash size and flash speed is important for the bootloader to be able to load an app from a large partition table at the fastest speed supported by the board layout and flash chip. Another example is the UART baudrate of the logging output from the bootloader. The boot ROM will normally start at a baud rate of 74880 (depending on the crystal installed), so it might make sense to keep the UART output at the same speed so we can debug boot modes and bootloader with the same terminal. This patch builds the `bootloader.bin` file from the ESP8266 SDK source code. The code is built as a module (`esp8266_bootloader`) which at the moment doesn't generate any object code for the application and only produces a `bootloader.bin` file set to the `BOOTLOADER_BIN` make variable for the `esptool.inc.mk` to flash. The code needs to be compiled and linked with custom rules defined in the module's Makefile since the `bootloader.bin` is its own separate application. The `BOOTLOADER_BIN` variable is changed from a path relative to the `$(RIOTCPU)/$(CPU)/bin/` directory to be full path. This makes it easier for applications or board to provide their own bootloader binary if needed. As a result of building the bootloader from source we fixed the issue of having a large partition table. ### Testing procedure Use following command to flash the application with STDIO UART baudrate of 115200 baud. ``` BAUD=74880 USEMODULE=esp_log_startup make -C tests/shell BOARD=esp8266-esp-12x flash ``` Connect with a terminal programm of your choice (unfortunatly `picocom` and `socat` don't support a baudrate close to 74880), for example: ``` python -m serial.tools.miniterm /dev/ttyUSB0 74880 ``` On reset, the `esp8266-esp-12x` node shows the ROM bootloader log output ``` ets Jan 8 2013,rst cause:2, boot mode:(3,7) load 0x40100000, len 6152, room 16 tail 8 chksum 0x6f load 0x3ffe8008, len 24, room 0 tail 8 chksum 0x86 load 0x3ffe8020, len 3408, room 0 tail 0 chksum 0x79 ``` as well as the second-stage bootloader built by this PR (`ESP-IDF v3.1-51-g913a06a9ac3`) at 74880 baudrate. ``` I (42) boot: ESP-IDF v3.1-51-g913a06a9ac3 2nd stage bootloader I (42) boot: compile time 11:25:03 I (42) boot: SPI Speed : 26.7MHz ... I (151) boot: Loaded app from partition at offset 0x10000 ``` The application output is seen as garbage since the `esp8266-esp-12x` uses 115200 as baurate by default. To see all output at a baudrate of 74880 baud, you can use the following command: ``` CFLAGS='-DSTDIO_UART_BAUDRATE=74880' BAUD=74880 USEMODULE=esp_log_startup make -C tests/shell BOARD=esp8266-esp-12x flash ``` If the application is built without options, the ROOM bootloader output will be 74880 baud and the second stage bootloader and application output will be 115200 baud. ### Issues/PRs references Fixes issue #16402 Co-authored-by: iosabi <iosabi@protonmail.com> Co-authored-by: Gunar Schorcht <gunar@schorcht.net> |
||
|---|---|---|
| .. | ||
| bin | ||
| freertos | ||
| include | ||
| ld | ||
| periph | ||
| sdk | ||
| vendor | ||
| doc.txt | ||
| esp8266.config | ||
| Kconfig | ||
| Makefile | ||
| Makefile.dep | ||
| Makefile.features | ||
| Makefile.include | ||
| startup.c | ||
| syscalls.c | ||