1
0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
RIOT/boards/nrf52840dongle/include/periph_conf.h
2021-02-12 11:03:46 +01:00

86 lines
1.8 KiB
C

/*
* Copyright (C) 2019 Christian Amsüss <chrysn@fsfe.org>
*
* This file is subject to the terms and conditions of the GNU Lesser
* General Public License v2.1. See the file LICENSE in the top level
* directory for more details.
*/
/**
* @ingroup boards_nrf52840dongle
* @{
*
* @file
* @brief Peripheral configuration for the nRF52840-Dongle
*
* @author Christian Amsüss <chrysn@fsfe.org>
*
*/
#ifndef PERIPH_CONF_H
#define PERIPH_CONF_H
#include "periph_cpu.h"
#include "cfg_clock_32_1.h"
#include "cfg_rtt_default.h"
#include "cfg_timer_default.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @name UART configuration
*
* This board does not have explicit UART pins. These are set as UART 0 to
* provide an easy serial debug port when not using (or debugging) USB.
*
* @{
*/
static const uart_conf_t uart_config[] = {
{
.dev = NRF_UARTE0,
.rx_pin = GPIO_PIN(0, 13),
.tx_pin = GPIO_PIN(0, 15),
#ifdef MODULE_PERIPH_UART_HW_FC
.rts_pin = GPIO_UNDEF,
.cts_pin = GPIO_UNDEF,
#endif
.irqn = UARTE0_UART0_IRQn,
},
};
#define UART_0_ISR (isr_uart0)
#define UART_NUMOF ARRAY_SIZE(uart_config)
/** @} */
/**
* @name PWM configuration
*
* For the nRF52840-Dongle board, the PWM0 module is set to drive the LEDs LD1
* and the channels LD2 red, green and blue in the four channels of PWM_DEV(0);
* other PWM outputs are not configured.
*
* @{
*/
static const pwm_conf_t pwm_config[] = {
{ NRF_PWM0, { GPIO_PIN(0, 6), GPIO_PIN(0, 8), GPIO_PIN(1, 9), GPIO_PIN(0, 12) } }
};
#define PWM_NUMOF ARRAY_SIZE(pwm_config)
/** @} */
/**
* @brief Enable the internal DC/DC converter
*/
#ifndef NRF5X_ENABLE_DCDC
#define NRF5X_ENABLE_DCDC 1
#endif
#ifdef __cplusplus
}
#endif
#endif /* PERIPH_CONF_H */