RIOT/tests/sys/shell_ble

This is basically the same tests as for the normal shell, but here we are testing via blueooth instead of UART. You have to set up a virtual serial port manually.

For instructions on how to open a virtual serial port to your bluetooth device see sys/stdio_nimble/README.

Note: make term and make test-with-config will open two different types of terminals.

• When calling make term then a terminal will communicate with the board via UART. Due to the nature of stdio_nimble the board won't respond to input coming from here)
• When calling make test-with-config then picocom will communicate with the board via the given virtual serial port

So a procedure to run this test could be: 0. Make sure that the current test application instance is fresh and no test was run on it before. Otherwise your test might fail, because the test case check_control_d only works once per run.

1. Execute make flash term
2. Open a virtual serial port with ble-serial and note the virtual serial port that was created (search for Slave created on /tmp/dev_riot_ble -> /dev/pts/25)
3. Execute PORT=/dev/pts/25 make test-with-config