mirror of
https://github.com/RIOT-OS/RIOT.git
synced 2024-12-29 04:50:03 +01:00
60 lines
3.3 KiB
Plaintext
60 lines
3.3 KiB
Plaintext
/**
|
||
@defgroup boards_telosb TelosB
|
||
@ingroup boards
|
||
@brief Support for the TelosB board
|
||
|
||
## MCU
|
||
|
||
| MCU | TI MSP430F1611 |
|
||
|:----------------- |:------------------------------------------------------------- |
|
||
| Family | MSP430 |
|
||
| Vendor | Texas Instruments |
|
||
| Package | 64 QFN |
|
||
| RAM | 10 KiB |
|
||
| Flash | 48 KiB |
|
||
| Frequency | 8 MHz |
|
||
| FPU | no |
|
||
| Timers | 2 (2 × 16 bit) |
|
||
| ADCs | 1 × 8 channel 12-bit |
|
||
| UARTs | 2 |
|
||
| SPIs | 2 |
|
||
| I2Cs | 1 |
|
||
| Vcc | 2.0V - 3.6V |
|
||
| Datasheet (Board) | [Tmote Sky / TelosB Datasheet](http://web.archive.org/web/20170712171826/http://www.eecs.harvard.edu/~konrad/projects/shimmer/references/tmote-sky-datasheet.pdf) |
|
||
| Datasheet (MCU) | [Datasheet](https://www.ti.com/product/MSP430F1611) |
|
||
| User Guide (MCU) | [User Guide](https://www.ti.com/lit/ug/slau049f/slau049f.pdf) |
|
||
|
||
## Radio
|
||
|
||
| RF Chip | Texas Instruments® CC2420 |
|
||
|:--------------------- |:----------------------------------------- |
|
||
| Frequency Band | 2.4GHz ~ 2.485GHz |
|
||
| Standard compliance | IEEE 802.15.4 compliant |
|
||
| Receive Sensitivity | -95 dBm typical |
|
||
| Transfer Rate | 250 Kbps |
|
||
| RF Power | -25 dBm ~ 0 dBm |
|
||
| Range | ~120 m (outdoor), 20 ~ 30 m (indoor) |
|
||
| Current Draw | RX: 18.8 mA TX: 17.4 mA Sleep mode: 1 μA |
|
||
| RF Power Supply | 2.1 V ~ 3.6 V |
|
||
| Antenna | Dipole Antenna / PCB Antenna |
|
||
| Datasheet | [Datasheet](http://www.ti.com.cn/general/cn/docs/lit/getliterature.tsp?genericPartNumber=cc2420&fileType=pdf) |
|
||
|
||
## Flashing RIOT
|
||
|
||
Flashing RIOT on the TelosB is quite straight forward, just connect your
|
||
board using the USB connector to your host computer and type:
|
||
|
||
`make flash`
|
||
|
||
This should take care of everything!
|
||
|
||
## Using the shell
|
||
|
||
The shell is using the UART interface of the TelosB at 115200 baud.
|
||
|
||
## More information
|
||
|
||
- [Mote IV Tmote sky (Telos B clone) datasheet (including original Telos B schematics)](http://web.archive.org/web/20170712171826/http://www.eecs.harvard.edu/~konrad/projects/shimmer/references/tmote-sky-datasheet.pdf)
|
||
- [MEMSIC Telos B data brief](https://web.archive.org/web/20190215211317/https://www.memsic.com/userfiles/files/DataSheets/WSN/telosb_datasheet.pdf)
|
||
*/
|